IDOC doesn't reach XI

Hi All !!
In the scenario tat i am developing, When i trigger my cutom IDOC from WE19 , the IDOC is reaching XI perfectly..But when the same thing is passed through a pgm, it is not reaching XI...But when we try the same program with a different IDOC ,it is reaching XI..So the problem cannot be wid the code also...
Only for this customised IDOC tat i m trying to push via the pgm is not reaching XI...
Please don't send me any blogs wid the steps to post IDOC to xi ..just tell me what can be the problem... Points will be awarded for sure..
Thanks,
Laawanya

This is not an exact solution to your question ... but simple step by step rules to work with executing scenarios involving idocs......
Once the scenario is completed .....use the TEST TOOL for IDOC WE19.....Select the Basic type i.e the type of your IDOC and execute....Double click on control records and select Message type =Idoc name,
Double click on Data Record and pass data (input) and enter....Click standard outbound processing and execute.
To check TRFC port use SM58
To check idoc adapter use IDX5
These transactions are completed in the idoc and the next stage is to monitor the Integration engine and Adapter engine.....once there are no errors in monitoring the idoc will will be correctly executed...and reuired output will be obtained....

Similar Messages

Is there a device that extends the range of airport? it doesn't reach throughout my home.

is there a device that extends the range of airport? it doesn't reach throughout my home.

Another AirPort router will do what you want.

Thinkpad L512 display doesn't reach full brightness

My 2 month old Thinkpad L512 display doesn't reach full brightness, except for a few seconds after bootup. Then it dims down to maybe 8 or so on a scale of 1-10. Which is often good indoors, but in a bright situation, I could use the extra screen brightness.
The screen correctly dims significantly (to maybe 2 or so on a scale of 1-10) after siting idle for a few minutes, as specified in the Power settings. But when it recovers, it is at full brightness for 10 seconds or so, then dims back down to 8 and stays there until I repeat the cycle.
I have poked around in the Display and Power settings, and the display is set to 100% there.
Any ideas? Thanks!
David

I had this problem with several of my machines. I noticed that if you unplugged the power and plugged it back in, the machine would jump back up to the brightest setting. But if you tried to adjust the brightness down and *then* back up, it would never reach the highest brightness.
I tried reinstalling the Power Management Driver and reinstalling Power Manager itself (both to no avail). I tried to downgrade to BIOS 1.20 but that didn't really have an effect either.
Finally, I downgraded to BIOS 1.19 and that resolved the issue. However, now I'm having an issue where the brightness changes two settings every time you hit the button (which was supposedly fixed in 1.20...though I had the same issue in 1.21).
I'm pretty frustrated with this machine. Hopefully the *next* BIOS resolves all of brightness related the issues...

Wifi signal from Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? Airport Extreme version 7.6.1

The wifi signal from my Airport Extreme doesn't reach all areas of my house. Is there a way to extend it without sacrificing bandwidth? I have an Airport Extreme running version 7.6.1.

You will need to add another device like an AirPort Extreme to provide additional wireless coverage in the house.
The only way to preserve bandwidth on a network would be to connect the two AirPort Extremes using an Ethernet cable connection.
While you can "extend" using wireless only, typically half of the bandwidth on the network is sacrificed when you do this.

Non SMTP inbound email doesn't reach to SAP

Hi Experts,
Currently we are trying to implement offline approval in SRM for Shopping Cart. So approver will approve and reject through email.
       i) Approver receive an email from SRM system which has two buttons approve and reject , This email is sent from SAP using SMTP protocol.
      ii) Approver takes an action by clicking approve button at this point automatic reply is triggered out to SAP with an approval note in the body.
     iii) Approver Mail in step c) doesn’t reach to SAP , but it comes to mail box which we have in outlook exchange server.
Problem: The email doesn't reach SAP because for inbound emails we have configured SMTP protocol however the client's outbound email config is non SMTP. SAP doesn't support any non SMTP protocol for inbound emails.
            One way to achieve this is by consuming EWS in ABAP for moving mails in exchange mail box to SAP mail box.
            Has anyone tried this before? Please suggest if there is a alternate solution to achieve this.
Regards,
Gowri

For a US based mail service like Comcast, your best bet is to run through your mail account settings and verify that it is configured properly. Quickest way to check would be to drop your email address into the iPhone mail helper, located at http://www.apple.com/support/iphone/mailhelper/ , also linked at the top of this section. Often times it is an SSL setting toggled the wrong way, or a port number assigned incorrectly.
If everything looks to be in there properly, remove and then enter in the account manually using the steps from the mail helper. And always verify that you are using the correct user name & password combination by logging in to your Comcast webmail. Hope this helps.
Message was edited by: X_oran

If BP is created with sales area, it doesn't reach R/3

Hi,
In our CRM 5.0 system, if we create a BP only with general information (name, address etc.), it reaches R/3 fine. But if I create a BP with general information & sales area info at the same time & then save it, problems...
An entry is created in SMW01 with queue name SEE_TABLE_SMW3_BDOCQ. This entry has two rows of data. One INSERT entry for creating BP general info, and one UPDATE entry for sales area data. I can see the update entry as first row.
I think what is happening is, when this bdoc is processed,first UPDATE entry is processed. Unfortunately since the customer is not created in R/3 by that time, bdoc gets an error "Business partner 0001234567 does not exist as customer, change not possible".
And bdoc is not processed, BP doesn't go to R/3.
Any idea how can this be corrected?
Regards,
Kaushal

Did you check the mandatory fields on R/3 with respect to sales area data? As a quick test make all R/3 sales area fields for that account group as optional and try to upload
Thanks,
Paul Kondaveeti

IDOC is not reaching SAP from XI

Hi all,
The IDOC that I'm sending from XI is not reaching SAP.
I have tried all most all possibilies. In SXMB_MONI I'm able to see the IDOC gets created successfully (with no error).
I have re-checked the partner profile, SMQ1, Config etc.
Please help me to debug.
Thanks,
AJ.

AJ,
Check if you have a chequered flag on both sides of your message ibn SXMB_MONI?
Check the log of your TRFC in transaction SM58
gards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Idocs are not reaching to midleware or external Vendor

Hi Everyone,
We are sending delivery forecast idocs through a customising transaction, the idoc status is 12 but it does not reached to midleware or external vendor. When we create a new idoc through test tool(WE19) by copying the above idoc(which was created by customising transaction), its reaching midleware and vendor. Could you please tell, whats going wrong with the idocs which were created through customising program/transaction.
Thanks in advance.
Thanks and Regards
Raghu

sorry, no ideas at the moment.
You are using the same IDoc (which is in Status 12) and process it with WE19 and it´s working ?
Go to your IDoc Monitor.
OPen both IDocs and go to the STATUS Information.
Open all Status Data and read through longtext and Details, maybe you can locate it there.

Inbound idoc failing to reach SAP system.

Hi All,
We are upgrading our SAP system from release 700 to 730. Post upgrade we have identified that idocs which are supposed to reach SAP as inbound are failing in Biz Talk with below message.
Error details: Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDT37003GRP IDOCTYP: SHPMNT03 Release: 700 CIMTYP: . Ensure that your message xml validates against the operation schema.
This happening for only one inbound idoc which is using SHPMNT03 idoc.Whereas other inbound idoc which is using /AFS/ORDERS05 idoc is reaching SAP without any issues. I am bit confused why this is happening for idoc SHPMNT03.
Please let me know your thoughts.
Thanks,
Gowrinath.

Hi Ramya,
Thanks for your response.
In Biz Talk schema is designed for 700 release idoc.Whereas our system is upgraded to 731 release.
Hotfix is for Biz Talk. Can't we implement any solution in SAP side.
Thanks,
Gowrinath.

My iMac doesn't load past the start up white screen and doesn't reach the login screen.

I'm having issues trying to load my iMac up after i had to to shut it down the other day. when i start it up it makes the chirme
and reaches the white screen with the loading symbol but doesn't move on from there! Doesn't anyone know how to fix this to get to the login screen?

Reinstall Lion.
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Resolution doesn't reach 1080p - G510 with AMD GPU

Hey there,
I was just thinking that my G510 should be able to reach 1080p judging by the description on Amazon (which directly states that). It has a 2GB AMD GPU, yet my resolution is capped at 1366x768 at all times. Is it possible that my i7 is capping it? How do I fix this?

Hi,
Your screen size is 1366 x 768. You can't add more pixels to that. This is taken from your product description:
"The powerful AMD Radeon HD8750M with 2GB of graphics memory dezidiertem you enjoy your videos and movies in the highest 1080p quality. Connect the G510 via built-in HDMI connector with a large screen TV, projector or external monitor and enjoy your favorite movies and videos to share with friends."
Notice the second sentence.
Here's the specs: http://shop.lenovo.com/us/en/laptops/lenovo/g-series/g510/
The first entry says 1366 x 768. You can get the resolution you desire by connecting your machine to an external monitor or TV that supports the higher resolution, but you can't add pixels to your laptop screen.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

IDoc segment not reaching XI

Hi,
I have a peculiar problem where the values populated in an IDoc segment are not coming to XI, though the values are visible in the sender SAP system, they are not present in the IDoc XML generated in XI.
Please help if someone faced a similar problem.
Thanks
Pushpinder

Hi,
Check if problems are raised on Cache of Design side of your IB.
Environment - Cache Status Overview
Then "Clear Data Cache".
And try again.
Regards,
Giuseppe

Suddenly my home wi-fi doesn't reach my iphone in certain rooms

I have tried turning my Iphone on and off, rebooting the router, forgetting and reconnecting to the network. Up until yesterday my iphone perfectly reached the home wi-fi anywhere with great signal. Now it can only find it when i'm standing right next to the router and still has poor signal. How can I fix this?

This is most often caused by Flex Cable #6 (WiFi Antenna Flex Cable) coming loose from the Logic Board. This is easy fix for the Apple Genius. At my Apple Store the Genius will do this for free. Make appointment with Apple Genuis, and ask them to reseat #6 back to the Logic Board.

ADF: commandButton doesn't reach target method

Hi All,
This is my first post here, i hope you can help me, i am new in ADF, and now i am facing with an issue, let me explain:
ADF Business Components     11.1.1.55.36
jDeveloper 11g Release 1 11.1.1.2.0
In the aplication i have a button that change the "render" attribute of an showDetailItem, this object conatains some commandButons but when i click over these buttons the listener method is never triggered. i don't know what's happend with this situation. Any idea is always welcome.
Thanks in advance,
Sergio Valdez
Code:
activation commandButton at line: 58
rendered showDetailItem at line: 125
problem commandButtons at lines: 132 & 139
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:c="http://java.sun.com/jsp/jstl/core">
<c:set var="viewcontrollerBundle"
         value="#{adfBundle['com.axtel.reporteador.MessageBundle']}"/>
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1">
      <af:form id="f1">
        <af:panelStretchLayout topHeight="50px" id="psl1" bottomHeight="26px">
          <f:facet name="top">
            <af:panelGroupLayout layout="scroll"
                                 xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                                 id="pgl2">
              <af:inputText label="#{viewcontrollerBundle.NOMBRE_DE_ENCUESTA}" id="surveyName"
                            value="#{SurveyMB.surveyName}"/>
              <af:panelGroupLayout id="pgl3">
                <af:commandButton text="#{viewcontrollerBundle.CREATE_SURVEY}" id="surveyCreate"
                                  actionListener="#{SurveyMB.createSurveyListener}"/>
                <af:commandButton text="#{viewcontrollerBundle.RESET_SURVEY}" id="surveyCancel"
                                  actionListener="#{SurveyMB.cancelSurveyListener}"/>
                <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                  id="addQuestion"
                                  actionListener="#{SurveyMB.addQuestionListener}"
                                  rendered="#{SurveyMB.surveyAlreadyCreated}"
                                  disabled="#{SurveyMB.questionAddEnable}"/>
              </af:panelGroupLayout>
            </af:panelGroupLayout>
          </f:facet>
          <f:facet name="center">
            
            <af:panelAccordion id="questionAccordionPanel" discloseNone="true"
                               partialTriggers="addQuestion">
              <af:forEach items="#{SurveyMB.survey.questions}" var="question"
                          varStatus="i">
                <af:showDetailItem text="#{question.question}"
                                   id="questionDetailItem"
                                   disclosed="#{( SurveyMB.questionEditEnable) and (i.index eq SurveyMB.questionToBeEdited)}"
                                   disabled="#{(( SurveyMB.questionEditEnable) && ( SurveyMB.questionToBeEdited ne i.index)) or SurveyMB.questionAddEnable}">
                  <f:facet name="toolbar">
                    <af:group id="g1">
                      <af:outputText value="outputText1" id="ot1"/>
                      <af:commandButton text="#{viewcontrollerBundle.SURVEY_ANSWER_DELETE}"
                                        id="questionDelete"
                                        actionListener="#{SurveyMB.deleteQuestionListener}">
                        <af:clientAttribute name="questionIndex"
                                            value="#{i.index}"/>
                      </af:commandButton>
                      <af:commandButton text="#{viewcontrollerBundle.SURVEY_QUESTION_EDIT}"
                                        id="questionEdit"
                                        actionListener="#{SurveyMB.editQuestionListener}">
                        <af:clientAttribute name="questionIndex"
                                            value="#{i.index}"/>
                      </af:commandButton>
                      <af:commandButton text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                        id="questionAddAnswer"
                                        actionListener="#{SurveyMB.addAnswerListener}">
                        <af:clientAttribute name="questionIndex"
                                            value="#{i.index}"/>
                      </af:commandButton>
                    </af:group>
                  </f:facet>
                  <af:panelGroupLayout id="pgl5">
                    <af:panelGroupLayout id="questionEditPanel"
                                         rendered="#{SurveyMB.questionEditEnable}">
                      <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                          id="questionTypeToEdit">
                        <af:selectItem label="Seleccion Multiple"
                                       value="checkbox" id="selectItem1"/>
                        <af:selectItem label="Seleccion simple"
                                       value="radiobutton" id="selectItem2"/>
                      </af:selectOneChoice>
                      <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                    id="questionToEdit" rows="2"/>
                      <af:commandButton text="#{viewcontrollerBundle.ADD}"
                                        id="questionEditOk"
                                        actionListener="#{SurveyMB.addQuestionOkListener}"/>
                      <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                        id="questionEditCancel"
                                        actionListener="#{SurveyMB.addQuestionCancelListener}"/>
                    </af:panelGroupLayout>
                    <af:panelHeader text="Respuesta 1" id="answerHeader"
                                    size="3">
                      <f:facet name="menuBar">
                        <af:commandLink text="#{viewcontrollerBundle.EDITAR}"
                                        id="answerEdit"
                                        actionListener="#{SurveyMB.deleteAnswerListener}"
                                        disabled="#{requestScope.SurveyMB.editAnswerLinkEnable}"/>
                      </f:facet>
                      <f:facet name="toolbar">
                        <af:commandLink text="#{viewcontrollerBundle.ELIMINAR}"
                                        id="answerDelete"
                                        actionListener="#{SurveyMB.editAnswerListener}"
                                        disabled="#{requestScope.SurveyMB.deleteAnswerLinkEnable}"/>
                      </f:facet>
                      <af:panelGroupLayout id="answerEditPanel"
                                           rendered="#{SurveyMB.answerEditEnable}">
                        <af:inputText label="Label 3" id="answerToEdit"/>
                        <af:commandButton text="#{viewcontrollerBundle.OK}"
                                          id="answerEditOk"/>
                        <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                          id="answerEditCancel"/>
                      </af:panelGroupLayout>
                    </af:panelHeader>
                    <af:panelHeader text="#{viewcontrollerBundle.SURVEY_ADD_ANSWER}"
                                    id="panelHeader2" size="3"
                                    rendered="#{SurveyMB.answerAddEnable}">
                      <f:facet name="menuBar"/>
                      <af:panelGroupLayout id="panelGroupLayout1">
                        <af:inputText label="Label 3" id="answerToAdd"/>
                        <af:commandButton text="#{viewcontrollerBundle.OK}"
                                          id="answerAddOk"
                                          actionListener="#{SurveyMB.addAnswerOkListener}"/>
                        <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                          id="answerAddEdit"
                                          actionListener="#{SurveyMB.addAnswerCancelListener}"/>
                      </af:panelGroupLayout>
                    </af:panelHeader>
                  </af:panelGroupLayout>
                </af:showDetailItem>
              </af:forEach>
              <af:showDetailItem text="#{viewcontrollerBundle.SURVEY_ADD_QUESTION}"
                                 id="showDetailItem1"
                                 disclosed="true"
                                 rendered="#{SurveyMB.questionAddEnable}"
                                 partialTriggers="addQuestion">
                <f:facet name="toolbar">
                  <af:group id="group1">
                    <af:commandButton text="#{viewcontrollerBundle.OK}"
                                      id="questionAddOk"
                                      actionListener="#{SurveyMB.addQuestionOkListener}"
                                      immediate="true"
                                      binding="#{SurveyMB.addQuestionOkBinding}"
                                      action="#{SurveyMB.questionAddOkAction}"
                                      partialTriggers="addQuestion"/>
                    <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                      id="questionAddCancel"
                                      actionListener="#{SurveyMB.addQuestionCancelListener}"
                                      partialTriggers="addQuestion"/>
                  </af:group>
                </f:facet>
                <af:panelGroupLayout id="panelGroupLayout2">
                  <af:panelGroupLayout id="pgl8"
                                       partialTriggers="addQuestion">
                    <af:selectOneChoice label="#{viewcontrollerBundle.SURVEY_QUESTION_TYPE}"
                                        id="questionTypeToAdd">
                      <af:selectItem label="Seleccion Multiple" value="checkbox"
                                     id="si2"/>
                      <af:selectItem label="Seleccion simple"
                                     value="radiobutton" id="si1"/>
                    </af:selectOneChoice>
                    <af:inputText label="#{viewcontrollerBundle.SURVEY_QUESTION}"
                                  id="questionToAdd" rows="2"/>
                  </af:panelGroupLayout>
                </af:panelGroupLayout>
              </af:showDetailItem>
            </af:panelAccordion>
          </f:facet>
          <f:facet name="bottom">
            <af:panelGroupLayout id="pgl1">
              <af:commandButton text="#{viewcontrollerBundle.SURVEY_SAVE}" id="surveySave"
                                action="#{SurveyMB.surveySaveAction}"/>
              <af:commandButton text="#{viewcontrollerBundle.CANCEL}"
                                id="cancelSurvey"
                                action="#{SurveyMB.cancelSurveyAction}"/>
            </af:panelGroupLayout>
          </f:facet>
        </af:panelStretchLayout>
      </af:form>
    </af:document>
</f:view>

</jsp:root>Edited by: user2931026 on 10-abr-2010 1:13
Edited by: user2931026 on 10-abr-2010 9:01

Sergio,
good work, now I can read the code :-)
Strange, nothing pops up right away.
The buttons in the showDetailItem are the only ones not working?
One thing you can try is to use the visible property instead of the rendered attribute. The UI looks the same, but the properties behave different (rendered=false means the components are not on the page, visible=false means the components are on the page but are not shown to the user).
Timo

How to create a blend or gradient that doesn't reach the edge of the shape

I am creating a shape that looks like a pill... a rectangle with two circles on the ends, if you will. But it's all one shape. I want a gradient or blend (what exactly is the differnce?) that has a white middle and dark gray edges. The white goes along the pill horizontally... but the dark gray is above and below this white "line" but the rounded edges of the pill shape are the dark gray. This seems like it would be easy, but I can't figure out how to do it. I'm using CS6.

Julie,
To get something that resembles a straight pill (or a capsule) as the one you describe, you may:
1) Create the outer rounded shape and split it into two: one on top with the stroke, one below with the solid fill corresponding to the colour adjacent to the stroke;
2) Select the filled path and Object>Path>Offset Path, using a negative value that is half the width less a suitable small amount (1pt or something);
3) Change the fill of the small inner path to a paler grey or white;
4) Select both the filled paths and Object>Blend>Make (with Smooth or a suitable number of steps in the Object>Blend Options).
To easily get something that is more like a round pill, you may apply horizontal gradients to the paths in the blend, along with a suitable number of steps.
With a new version, you may also use the new 3D features.

IDOC doesn't reach XI

Similar Messages

Maybe you are looking for