IDOC ERRO " ::000"

hi all
Am doing an idoc to file scenario. Wen i send idoc from r/3 in
r/3 :
we02 : shows successful with status 03
sm58 : idoc sending status is set to "::000"
and so i doc is not reaching xi. So what can be the possible cause for this error

The user Id being used in the SM 59 to trigger the IDoc's from the R3 system , i,e , the XI user id being used in SM59 of R3 does not have the authorizations to post the Idoc.
Note : 837595 describes the authorizations needed to post and Idoc. Make sure that the user id has the authorizations in this note.
Regards
Bhavesh

Similar Messages

IDOCs Erroe

Hi Gurus,
I am facing an erroe when i am loading data from 2LIS_11_VAHDR(Sales order header data) like
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please any one help me out in solving this.
thanx in advance
peter bogiti

Hi,
Identify the OLTP and BW IDOC from the 'Details' tab of the monitor screen for the dataload process.
Then use 'bd87' to find the status of IDOC in OLTP as well as in BW. In case the status is shown with yellow colour coding, then you can right click and then choose 'process immediately'. This will again enable flow of data between the two systems.
Assign points if useful.
regards,
Pinaki

File-to-idoc erro while creating IDOC

Hi,
I am working FIL-TO-IDOC scenario.
my idoc : DESADV.DELVRY03.
while creating IDOC in target end created with error status 51.
the error is POSEX field is empty.
I gave the value for POSEX then i tried it is giving another error..'field POSEX is empty'
actully what i need to give for POSEX.
where do i find the POSEX value for delivery document.
Please can any one help me to create succefully with Delyry03 idoc.
I have another douts also..to create the Delivery document IDOC is DESADV.DELVRY03 is correct or not...if any other IDOC's is there to create delivery document.
Regards,
venu.

Hi Venu,
>>>I have another douts also..to create the Delivery document IDOC is DESADV.DELVRY03 is correct or not...if any other IDOC's is there to create delivery document.
This IDOC is the right one.
POSEX is the external item number. How many line items are there, I mean how many delivery items are there? Are you sure you are assigning POSEX for all the records?
Thanks,
Prakash

Idoc erros.......POS interface.......

Hi All,
Using transaction WPER for POS interface i can see the errors associated with idocs, not processed due to errors. My requirement is to capture same error messages and show in output of my report against idoc number
Can anybody tell me from which table or function module , i can capture these error messages.?
Table EDIDS doesnt contain same error messages.
Regards.

Hi Micky,
Exact error messages showing in WPER can't be extracted from EDIDC and EDIDS tables.....
Regards.

IDOC-XI scenario problem

I have a IDOC - XI scenario,
where IDOC is generating from a R/3,
the problem is, an IDOC was sent from R/3, but has not reached XI,
in R/3, i have seen in WE05, there i see this IDOC having status '03',
and, also in SM58, there i no error corresponding to this IDOC,
but in XI, in IDX5, i cant see that IDOC,
where the problem lies?

Make sure that the sender partner and receiver partner values corrrespond to the logical system names you have used in your partner profile in we20. Sender Partner Name should be your R3's logical system name, and Receiver Partnr Name should be the Logical System name for which you have created an Outybound Entry in We20.The Sender port and receiver port also should be be the ones created in We21 for XI, and SAP+"SYSID" for R3
) Check your PARTENER PROFILE settings ; is IDOC in outbound messages.
2) You may need to check Bussiness System given for Technical System for r3 and in ID check Adapter Specific Identifiers in OBJECTS ->Bussiness System->Service
Go to bd87 and trigger them. You can only trigger the idocs if they are in yellow color. If it is in red it is having an error.
So try to send the one which are in yellow error so that we can see whether it is reaching XI or not. If everything is OK then you should see the idoc in sxmb_moni.
Please see the below links ,
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
note:reward points if solution found helpfull.....
regards
chandrakanth.k

What all configurations to do in SAP R/3 to send an iDOC to XI system

I want to send an idoc from an SAP R/3 ECC5.0 to an XI system Netweaver 04's.
Pls let me know the STEPS I HAVE TO DO IN MY r/3 SYSTEM .
I have created the RFC destination in R/3 and XI system but still the idoc is not going into XI system.
It would be a great help if i can get step bu step guide for the configurations i have to do in R/3 .

Hi,
First check the status , with we02
Also see the below links
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI. Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Regards
Chilla

Reg : Idoc Transfer From SAP R/3 to Gentran

Hi Floks /
Any body can transfer SAP R/3 idoc to external Sterling Gentran intgration suite . what are process steps required to sending and what are the transaction codes are available in Gentran and Sap .
can u please help me out.
thanks
suresh

HI,
See the below links
In Gentran
XI with Gentran
XI vs Gentran for EDI
SAP ECC 5.0 Upgrade questions with Gentran, BDC, screens
Gentran EDI ?
Interuppting/debugging response from Gentran
Gentran and XI 3.0 question
Interuppting/debugging response from Gentran
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d53af8ca-0801-0010-08b0-dce9e02130a8
In R3 IDocs
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
File-XI-IDoc Scenario - File to Idoc
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
see the below links to get more details about IDocs
ALE/ IDOC/ XML
Troubleshooting of ALE Process - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
serialization /people/alessandro.guarneri/blog/2006/11/26/content-based-serialization-dynamic-queue-name-in-xi
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/gl_postings2.htm
http://searchsap.techtarget.com/ sDefinition/0,,sid21_gci852485,00.html - 45k - Cached - Similar pages
Process codes in IDOC
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b806743d711d1893e0000e8323c4f/frameset.htm
http://edi.stylusstudio.com/msg04418.htm
Check this link to find out the difference b/w ALE,IDOC and BAPI
http://www.sap-img.com/abap/ale-bapi.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
---Split messages :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards
Chilla

IDoc to File, SM58 shows error, ST22 short dump - Runtime error

Hi friends,
I am doing a simple IDoc to file scenario using the EVMSTA01 IDoc. My XI is running on client 100 and I am trying to send the IDoc from the client 200 on the same machine. I have completed the design and configuration steps required and also performed the required steps in Sender client (Sm59, we21 and BD54) and receiver client (Sm59, IDX1 and IDX2).
When I tried sending the IDoc from WE19, status meesage says that, the IDoc has been successfully sent to the receiver but SM58 shows error "IDOC_ERROR_WORKFLOW_START_R". When I looked in to ST22, there was a short dump with the below message -
Runtime Errors         MESSAGE_TYPE_X
Date and Time          18.10.2008 23:24:29
ShrtText
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Unable to read RFC destination WORKFLOW_LOCAL_200
     Technical information about the message:
     Message classe...... "SWF_RUN"
     Number.............. 617
     Variable 1.......... "WORKFLOW_LOCAL_200"
     Variable 2.......... "RFC_READ_DESTINATION_TYPE"
     Variable 3.......... "DESTINATION_NOT_EXIST"
     Variable 4.......... " "
     Variable 3.......... "DESTINATION_NOT_EXIST"
     Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_SWF_RUN_WIM_LOCAL==========CP
     Include                                 CL_SWF_RUN_WIM_LOCAL==========CM07Z
     Row                                     10
Module type                             (METHOD)
Module Name                             IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
rce Code Extract
e SourceCde
1 METHOD if_swf_run_wim_utl_internal~get_system_user .
2   DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4   TRY.
5       IF me->m_int_state-system_user IS INITIAL.
6         me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7       ENDIF.
8       re_user = me->m_int_state-system_user.
9     CATCH cx_swf_run_wim INTO l_excp.
>>       MESSAGE ID     l_excp->t100_msg-msgid
11               TYPE   'X'
12               NUMBER l_excp->t100_msg-msgno
13               WITH   l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14                      l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15   ENDTRY.
16
17 ENDMETHOD.                    "
Any help would be appreciated..!!
PS: Points would be assigned to all the helpful replys without fail

Hi,
See check for RFC destination and it is working as per your configuration or not , i mean , it is trying to locate remote server.. , so try to check in sm59, remote login and the respective result is going to your required client or not ??
Also see the further errors while doing Idoc related scenarios..
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI. Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla

How to get Idoc acknowledgment in File to Idoc scenario

Hi All,
Please give suggestions about the below mentioned scenario:
Scenario: FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used)
Problem: Exception Handling > > We want a message back from SAP system telling us that out of 100 IDocs that were sent, n were posted successfully and rest failed along with the error description. How can this be achieved?
Regards,
XIer

Pls go thruough these links also
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
unable to import from SLD
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
IDOC Acknowledgements
R/3 IDOC ->XI-> ORACLE Error Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
Regards
Abhishek Agrahari

IDoc triggered frm R/3

Dear All,
When an Idoc is triggered frm R/3 it shows status red(error to port), yellow(still processing) or green(succesfuly port)..
as an eg. green..
Does it mean a confirmation as a color in status grp that the Idoc has reached to the destination port or simply when the Idoc succesfully comes out of R/3 the status grp become green..
Please suggest..
- Pankaj

Hi Pankaj ,
Make sure that the sender partner and receiver partner values corrrespond to the logical system names you have used in your partner profile in we20. Sender Partner Name should be your R3's logical system name, and Receiver Partnr Name should be the Logical System name for which you have created an Outybound Entry in We20.The Sender port and receiver port also should be be the ones created in We21 for XI, and SAP+"SYSID" for R3
) Check your PARTENER PROFILE settings ; is IDOC in outbound messages.
2) You may need to check Bussiness System given for Technical System for r3 and in ID check Adapter Specific Identifiers in OBJECTS ->Bussiness System->Service
Go to bd87 and trigger them. You can only trigger the idocs if they are in yellow color. If it is in red it is having an error.
So try to send the one which are in yellow error so that we can see whether it is reaching XI or not. If everything is OK then you should see the idoc in sxmb_moni.
Please see the below links ,
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
note:reward points if solution found helpfull.....
Thank
Sunil Singh

IDOC Scenario Steps

I want to master IDOC scenario...
Where i can see step by step of IDOC scenario?.
I want steps in ECC side and steps involved in XI side....
Never saw a nice blog showing each step in details like wiki pages....
Can somebody write or do we have a detailed blog?.

HI,
See the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
File-XI-IDoc Scenario - File to Idoc
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
see the below links to get more details about IDocs
ALE/ IDOC/ XML
Troubleshooting of ALE Process - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
serialization /people/alessandro.guarneri/blog/2006/11/26/content-based-serialization-dynamic-queue-name-in-xi
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/gl_postings2.htm
http://searchsap.techtarget.com/ sDefinition/0,,sid21_gci852485,00.html - 45k - Cached - Similar pages
Process codes in IDOC
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b806743d711d1893e0000e8323c4f/frameset.htm
http://edi.stylusstudio.com/msg04418.htm
Check this link to find out the difference b/w ALE,IDOC and BAPI
http://www.sap-img.com/abap/ale-bapi.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
---Split messages :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards
Chilla

IDOC TO R3

Iam trying to connect import r3 through IDOC but it is showing unable to connect to r3 ,i had given all the details correctly like appsrv name and sysno and client and user but it showing ubable to connect r3 can anyone help in this case,and pleae podt some blogs regarding this.
Thanks in adavance

HI,
check the r3 is running or not.
Next check the uid , pwd are correct or not, to import the Idocs into IR.
checkserver details
Also see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla

IDX2 and it gives me I::000 error

Hi All,
I am trying to import metadata using the IDX2 and it gives me I::000 error. I have checked the authorizations for the user RFCUSER on R/3 and it has
SAP_ALL
SAP_NEW
I am not sure where can I check the log which can show me where could be the problem...
Kind Regards,
Praveen.

Hi Praveen,
Check if these threads give you some inputs:
I::000 error in IDOC to IDOC scenario
::000 message no. SR053
Regards,
ravi

Sorry raising the same question: idoc and SLD

forum(dont get irritated as me raising the same question) ,
clarify it
when i make a business system corresponding to a SAP system(Say Z), in the SLD, do i need to name its logical system name in a way thats similar to the way which the system Z appends in the Sender partner while sending an IDOC to my XI,
means if sender's system Z has system-id SD1 and client 330, should i make a business system with logical system name SD1CLNT,
so that when an IDOC reaches my XI for system Z, it can identify that the IDOC has reached from a particular system, coz i believe when an IDOC is sent from system Z, the sender partner is appended as "System-id"CLNT"client no."..
is it so????

Hi,
When you see the moni trace , it is just info, so no error, and for the metadata always uses the sender Port , through port only the metadata will be passed, this was configured in IDX2.
Next whether the IDoc was reached to XI or not , we can see in sender side WE02 and direction is 1 and with the basic type see the status is 12 or not .. and next see in IDX5 in R3 instance of XI.
See the error statuses and respective solutions
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
Idoc settings https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla
reward points if it is helpful..

Documentation tools in idoc interface

i read this in help.sap.com
How can i see documentation about particular idoc?.
Never we need to create new IDOC?. Nobody create new idoc?..
Most of the IDOCS are already created in sap ecc?.
when you write ur own idoc, how u document them?.
want to master idoc.

HI,
see below
HI,
See the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
File-XI-IDoc Scenario - File to Idoc
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
see the below links to get more details about IDocs
ALE/ IDOC/ XML
Troubleshooting of ALE Process - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
serialization /people/alessandro.guarneri/blog/2006/11/26/content-based-serialization-dynamic-queue-name-in-xi
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/gl_postings2.htm
http://searchsap.techtarget.com/ sDefinition/0,,sid21_gci852485,00.html - 45k - Cached - Similar pages
Process codes in IDOC
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b806743d711d1893e0000e8323c4f/frameset.htm
http://edi.stylusstudio.com/msg04418.htm
Check this link to find out the difference b/w ALE,IDOC and BAPI
http://www.sap-img.com/abap/ale-bapi.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
---Split messages :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Regards
Chilla
Regards
Chilla

IDOC ERRO " ::000"

Similar Messages

Maybe you are looking for