IDOC Error Follow-up Date

Kindly advise how to overcome / (Follow-up Date)
error in IDOC inbound process ,however we are unable to reprocess this IDOC .. In what case this type of problems will come ... kindly reveal me about this error.
Thanks With Regards

Use transaction WE19 to edit data i Idoc and try posting it. You should filll all mandatory fields of Idoc.
Could you also tell us which Idoc are u using.
Cheers
Ankur

Similar Messages

Where can get IDOC Error Message from Data base tables

Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarath

Hi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY

LSMW-IDOC error while tranferring data from ECC to CRM

Hi,
We got an error
Error status 'A' calling validation service.
Validation error occured: "Module CRM_BUPA_MAIN_VAL, B Doc type BUPA_MAI".
When we are doing LSMW with IDOC in CRM.
Please provide ur valuable help in this problem.
Thanks & Regards
Sriram Tumuluri

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

Hello ,
The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
Thanks in advance.
Best Regards
Sateesh

Dear Sateesh
Check this link where the same topic was discussed
[ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
thanks
G. Lakshmipathi

When data is loading ,what are the Genaral IDOC errors .

when data is loading ,what are the Genaral IDOC errors .

Sujata,
. For more visibility to your question, please post it as a separate thread.
. Also try to include specific details on what your problem is.
. On the SDN, questioners award those who reply with good or helpful answers. This further propels people to reaserch your problems and help you out.
As you are new to the SDN, just mentioning the above so that you can maximise your gains from this excellent community.

Error while extracting data from CRM to 0BPARTNER

Hi All,
We are extracting   daily data from SAP CRM to 0BPARTNER using 0BPARTNER_ATTR(Delta mode) . While loading the data upto PSA, it showed the total number of records as * 50033 from 50033*. But the total and technical status are yellow . When checked the step by step analysis , *Processing error in source system reported * is red and rest all are green.When I saw the application Log it is writtern as * There is a discrepancy between confirmation and deletion of qrfc-LUWs*.
In the Details tab ,we got the following messages.
1)*Extraction (messages): Errors occurred *
   19485 Records sent ( 19485 Records received ) .
2)*Transfer (IDocs and TRFC): Missing messages or warnings *
    *IDoc : sent, not arrived ; Data passed to port OK * and rest every thing is green.
But all the data packets are fine.
WeI have checked using BD87, WE02, WE05   in BW and source systems for I DOCS . But none of the t-codes provide any IDOCS with warnings or errors.
So we have changed the Total l status to Green. Please note that still the technical status is showing as Yellow only.
We started to updating the data target from PSA. Now again, both statues are showing yellow only.So what should we do inorder to resolve this ?
Thanks in advance,
Babu Vasamsetti.
Edited by: babu vasamsetti on Jan 11, 2010 5:54 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PM

Hi
please check sm58 in souce system side trfc may be strucked... to press f6 to run manually
first make a request a red.. in IP
hope u clear it
thx
viijender

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Inbound Idoc error

Hi ,
I am getting error in Inbound idoc as follows "CC. .EX.593 does not exist" when i go to BD 87
and process it says "order is not valid for making status changes ".
can some one please guide how to solve this error "CC. .EX.593 does not exist"?
Thanks,
Pradeep.

This is a data problem .Closing it.
Edited by: Pradeep Akula on Jun 15, 2011 7:10 AM

IDoc Errors - Need solution

Hi,
We have been receiving several POs from other SAP systems which will be created as SO in our sytem.
The following error occurs for the IDocs and the IDoc could not be processed automatically. This needs to be processed in foreground.
"The material number for the item 0100 could not be identified".
Msg Id VG, Message Code 203, Message Type E
The reason for this fallout is if the Purchase info record is not maintained for the Material in the counter part, the segment E1EDP01 - E1EDP19 002 Field - IDTNR of IDoc Message Type (ORDERS) data will be missing.
Can anyone suggest the solution for this, since this is SAP standard error. Can this be fixed in our system or is it required to be fixed in counterpart?
Thanks in advance.
Rgds,
AK

Hi Karun & Venu,
Thanks for the useful info.
I have some more queries.
More details:
I checked the configuration and the process code DELO (Delviery Order) is used for processing Inbound IDocs.
If the segment E1EDP19 - Qual 002 does not exist this error occurs. If the counter part maintains the Purchase Info record in the IDoc. Now we request our counter part to create Purchase Info record for the material and create new order. (Other we need to manually process every IDoc).
Other solution is which is given by you. I tried maintaining the Customer Info record for the material and the IDoc is automatically processed in the system.
My question is:
1) How is the Purchase Info Record in Source system and Customer Info record in our system are related. Idoc got processed automatically if we follow any one of the possibilities?
2) What is the exact difference between Inbound process codes DELO and ORDE?
Rgds,
AK

Error when sending data request

Hi All,
   i have scheduled info package for different type data sources in bi 7.0, for this i am getting the data from ecc 6.0 . all of this schedule's showing the status "error when sending data request" with the following details.
status
diagnosis
the request idoc could not be sent to the source system using rfc
system response
there is an idoc in the warehouse outbox that did not arrive in the ale inbox of the source system
in step by step analysis it is showing
   rfc to source system successful showing with ash status
   data selection successfully stated and finished ? show with red status
in that details tab
request : showing with green status
everything ok
extraction :showing with red status
missing messages
transfer(idocs and trfc) : missing messeges
processing(data packet) : no data
    it is showing technical status with red as processing overdue
                       processing step call to source system
   so it is showing error with 0 from 0 records.
please any body could help me for solving this error.
regards,
naveen.

Hi
Seems you have connectivity issues between the Source system and Bi system.
You need to check whether you have data on R/3 side via RSA3 with Full / Delta Update Modes with Target System as your BI system.
RSA13--Source System -- Right click Connection parameters/check/Restore/Activate again Say Replicate All Data Sources (If Possible , provided if you have time because it consumes lot of time )
You need to check the tRFC Queue SM58/59 for any Stucks and WE19/20 for IDocs.
Much of BASIS Issue .
Hope it helps and clear

IDOc error while trying to establish connection with R/3 system

Hi Experts,
I am working with BI 7.0 system. When I try to create the R/3 system (using RSA1) connection, I am getting following error message.
Diagnosis
    Incorrect IDoc type RSSEND in the ALE defintion of the source system.
System Response
    Error when sending data to BI.
Procedure
    Enter IDoc type ZSLA007 .
I created RSRQST, RSINFO and RSSEND message types (BD64) in R/3 and replicated in BI. Can you please let me know where I'm going wrong?
Can you please let me know the corrective steps?
Regards,
Shailesh Naik

Hello,
you have to give the R/3 system name/ID etc and user name/password to connect to and from R/3 system.
also you have to maintain RFC destination to communicate to and from R/3 system to BI system. Then it will login to the R/3 system and will comeback to BI and start transferring matadata and BI contents from R/3.
Choose without dialog option when it ask you otherwise it will ask you every time it will transfer new object.
please follow these steps for SAP source sys creation:
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Connect BI system to R/3
how to connent BI system to R/3
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Reg,
Dhanya

Idoc error- Balance in transaction currency

Dear Experts,
In we02, I found idoc error with the following messages:
Balance in transaction currency
Message no. F5 702
Diagnosis
A balance has occurred in transaction currency 'XXX' with the following details:
Exchange rate '00', amount ' 1.413.696' and currency key 'XXX'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please advice, how to correct this problem.
Thank you in advance.

Hi Natasha,
Please check the "EDID4" table to find the error why it is not allowing to post.
Also check "WE09" to check the status of the IDOC.
You can process it manually through "BD87"
Bye
Swapna murali

Import RFC/IDOC error

Hi all,
I am following "How to...push data in to BW from XI."
In the 5th step in the document it is given
Choose "Import RFC/IDOC" in the context menu of "Imported Objects" and enter your user data to logon to the BW system.
Select the function module /BIO/Q16ASENDXMLDATATOBW_RFC
Press "continue"
Press "Start"
But when I do this I am getting a java nullpointer exception error com.sap.aii.ibrep.sbeans.upload.remoteuploadexception:jsva.lang.nullpointerexception
I am using jre1.4.2_10 and java web start version 1.4.2
Please help me in resolving this issue.
Regards,
Aanand

Hi Anand,
Can you pls make sure that no other users have this same RFC imported into your XI integration builder and is waiting to get their change list activated. In that case also we get the error in importing...
check these links also.
Error importing RFC / idoc despite following note 769356
Cheers
JK

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

IDOC Error Follow-up Date

Similar Messages

Maybe you are looking for