IDOC error message in SRM 3.5
Hi all,
I am using SRM 3.5(EBP 3.0)with ITS and R/3 4.7.
While executing the service "Create shopping cart",after ordering the item i.e. saving the shopping cart,the approval workflow is executed but when i login as the approver and go to the workflow entries in the approver's inbox, i get an error message stating, "error in MW-BDOC-Processing, Type BUPA_MAIN_ID".
Is this error due to some customizing setting in the middleware or somethin else?Please Help.
Thanks & regards,
Deepti.
It seems that plug-ins are not automatically "transferred" to LR 3.6. You have to copy the plug-in from the "Modules" folder of your previous LR version to the "Modules" folder of Lr 3.6 - or if there is no "Modules" folder yet, create one.
The "Modules" folder is in your LR-folder in Program files on your C-drive.
WW
Similar Messages
-
Minimum order value in vendor master - error message in SRM
Hello!
I am using minimum order value in ERP for some vendors and I am wondering if is it possible to get the same error message in SRM.
While creating a shopping cart in SRM if the minimum order value is not reached, the following document created is a purchasing requisition.
I would like to get the error message that the minimum order value is not reached instead of the automatic creation of a purchase requisition.
Is it possible?
Thanks in advance!
Best regards,
KarinHi Karin, if you need to show an error message during Shopping Cart creation you willl need to implement badi BBP_DOC_CHECK_BADI, and maybe create an RFC Function Module to check in ECC ir the minimum order value was reached or not and show the error message.
In order to control the following document you will need to implement badi BBP_TARGET_OBJTYPE.
Find bellow a sample BBP_TARGET_OBJTYPE - Code Approach.
Hope This Help.
Celeste -
hi gurus
in my client place, when ever system sees 3 error messages(canceled PO, canceled line item in PO, free goods) it will automatically reject them, now my requirement is to add new error meesages to this automatic rejection program.
so please suggest me what would be the possible solution for this kind of issue.
thanks in advance
bobHi,
If u r using the Z Message type & Z funtion Function Module , these are the following steps to be checked...
Process Code : WE42.
Function Module : SE37
Message : WE81
Assign message : WE82
Assgin FM : we57
Characterstics OF FM : BD51
please check if ure function module interface is as per the template below:
IMPORTING
INPUT_METHOD LIKE BDWFAP_PAR-INPUTMETHD
MASS_PROCESSING LIKE BDWFAP_PAR-MASS_PROC
EXPORTING
WORKFLOW_RESULT LIKE BDWFAP_PAR-RESULT
APPLICATION_VARIABLE LIKE BDWFAP_PAR-APPL_VAR
IN_UPDATE_TASK LIKE BDWFAP_PAR-UPDATETASK
CALL_TRANSACTION_DONE LIKE BDWFAP_PAR-CALLTRANS
TABLES
IDOC_CONTRL STRUCTURE EDIDC
IDOC_DATA STRUCTURE EDIDD
IDOC_STATUS STRUCTURE BDIDOCSTAT
RETURN_VARIABLES STRUCTURE BDWFRETVAR
SERIALIZATION_INFO STRUCTURE BDI_SER
This is the general required format for IDoc inblund processing using FM.
Reward Points if it is Useful.
Thanks,
Manjunath MS -
How to issue an error message in SRM portal?
Subject...
I've tried using FM BBP_PD_MSG_ADD in BADI implementation BBP_DOC_CHANGE_BADI but it's not working. There's always an exception LOG_NOT_FOUND.
Please advise.Hi,
Any error generated from SRM will be visible in Portal view. No additional configurations or developments are required for that purpose.
In order for messages to generate, you will ve to use BBP_DOC_CHECK_BADI.
DOC Change BADI is meant for changing the SRM application documents based on customer's own criteria.
Regards
Virender Singh -
Hi All
We are configuring IDOC monitoring process in BPIM of Solution Manager. One of our requirement is Alert mail should include IDOC number and error message.
Example
IDOC Number: 8358000
Status: 51
Message: Payment term not found
Could you please tell how to configure error message in alert?
Regards
RajuDear Raju,
Idoc monitoring functions and capabilities are explained in following documentations:
www.service.sap.com/bpm -> Media Library -> Technical Information-> Setup Guide - Interface Monitoring
"Business Process Monitoring functionalities in SAP Solution Manager u2013 ALE / IDoc Monitoring"
/people/johannes.fleig/blog/2008/05/25/new-business-process-monitoring-functionalities-in-sap-solution-manager-150-ale-idoc-monitoring
As you can read in the above documentations, the alerts display the total and delta number of IDOCs found.
In order to get the detailed error message for an alerted IDOC, you must click on the "Detail Info" button, to access the monitored system and read the buffered information for the alert.
Thefore, it is not possible to get this information in the alert email as this text is not displayed per default.
An idea to overcome this would be, that you setup IDOC monitoring for the different message types (i.e. MATMAS), and then
specified further on key figure level using the parameters "Status Message ID" and "Status Message Number", and entering the Message Text as Alert Name (column "short text" ). This way you would get the message text in the email.
Please see the example in the above SDN Blog, screenshots 2 and 3.
Maybe you could also check if, changing the email configuration via the BADI, you cold add the required informaitons to the mails. To get details on this please see another useful SDN blog:
"Create your own auto-reaction messages in Business Process Monitoring via BAdI exit"
/people/johannes.fleig/blog/2010/06/02/create-your-own-auto-reaction-messages-in-business-process-monitoring-via-badi-exit
A complete description on how to set up auto-reaction messages in BPMon, and to implement and work with BAdIs in the BPMon environment, can be found in the u201CSetup Guide u2013 Auto-Reaction Messagesu201D which is available on SAP Service Marketplace, alias BPM (http://www.service.sap.com/bpm -> Media Library -> Technical Information).
I hope this helps,
kind reagrds,
Marta
SolMan Team -
Hello support team,
I am developing a report in which i have to give a select option "date" when i entered the date in this select-option then after executing , the corresponding idoc type, idoc date, idoc number , idoc receiving site and idoc message that appers in Wper is shown.
all the field are from EDIDC, EDID4, EDIDS tables except idoc message.
Please suggest me from which table i found the message field .
EX:
site: 017
idoc number : 6346213
idoc type WPUWBW
idoc date: 07.04.2010
Idoc message: "Delivery completed" indicator cannot be set for item 00018 .
Thanks and Regards,
Preeti thakurHi digvijya,
Its an Retail idoc and started with 'W'. These fields has not sufficient use for me. i tried it already.
see this example. i need to fetch this type of error message " Base unit of measure PC or article 000000000002014037 unknown ". please suggest now.
0000000027
idoc type: WPUWBW Goods movements
idoc number: 1760035 idoc date: 07.04.2010
idoc message: Base unit of measure PC or article 000000000002014037
Regards,
Preeti -
TS30000020 - IDOC error message
Hi All,
In our production system, we had some workflows got stuck up with SWF_RUN 609 error message. So i tried using SWPC
transcation to resume those workflows. I worked fine. But some did not show up in SWPC and so i used SAP_WAPI_ADM_WORKFLOW_RESUME Fm to resume, it also didnt work. So i searched through sdn and some other sites and found out the standard report "RSWWERRE - Report for restarting workitems with temporary errors", and tried that. My workflows got resumed. But over 2500 new workflow with TS30000020 and description "EDI: Incorrect status for inbound IDoc" got triggered without any agents and it went all users. Iam not aware of IDOC. Can anyone suggest why this has happened and how should i overcome this?
Regards,
Kevin.
Edited by: kevin.jk on Jul 27, 2011 7:54 AMHello,
RSWWERRE is normally scheduled to run periodically (usually every 20 mins) to handle temporary errors.
I'm not sure about how these IDOC workflows got started. If they're not necessary then you can logically delete them.
If you look in the IDOC workflows, when does it sya they started? Recently?
regards
Rick Bakker
hanabi technology -
Idoc error message "This change has been superseded by another"
Hi,
I am trying to process multiple idocs together which will create/update info records using the program RBDAPP01. But it is processing correctly only single record and for all other records its giving the error message "This change has been superseded by another"
The function module used for processing is IDOC_INPUT_INFREC and when I checked this error is coming from it. Infact it is comparing the output of FM IDOC_SERIALIZATION_CHECK and populating the error message.
If we process the same record in single, it is processing correctly and not giving such kind of message.
I am not sure what is happening here. Please help.I was trying to create multiple PIR for same material using multiple idocs. And that is the reason it is giving the error when trying to process the idocs together. When I tried changing the same into one record ie different PIR for same article in one idoc, its processing correctly.
-
IDOC : error message 20 : Error triggering EDI subsystem
Hi,
I am creating an extended idoc for WP_PLU message type . I am sending the data from my LS to KU(Customer).
In WE20, I have configured the message type for that KU. I am using an XML port .
The problem is that the Idoc file is getting created properly but it is thowing this message : Error 20 : Error triggering EDI Subsystem.
In WE21 , I have ticked the Start subsytem radiobutton. I am not using any Middleware.It is simple data transfer .
Same thing is working file when I am assigning a File port instead of XML port.
Please help me on this urgently.Dear All,
Many thanks for all suggestions. Very appreciated it guys.
My problem solved, the issue was actually from the Functional configuration.
After debugging i found out that there's a option to generate a trigger file (related to POS Outbound). If you tick this option then maybe you have to maintain the download path somewhere.
My case is the option was ticked but system can't find the path.
SAP put as error message 20 in the IDOC status.
This maybe can explain also why i still can see my IDOC reached XI and file generated. Since the issue is not really related to any setting in IDOC but more to business configuration.
Best Regards,
Victor. -
Dear Team,
may I kindly ask you to help me with regard to an error message I am getting for inbound idoc message type INVOIC.
The message is "Field format is incorrect" and 'Field content is incorrect". Segment E1EDS01.
I have tried various ways of fixing this but havent succeeded yet.
Has anybody encountered this problem and how has one fixed it.
ThanksHi Dany,
First identify which field value in that segment is throwing the error.
For this, first see which all fields are filled in the error IDOC now.
Then clear all values, and fill same value in one field at at time, and see if IDOC goes into error.
Once you identify which field is having wrong format, you can check in detail.
Regards,
Nisha Vengal. -
Where can get IDOC Error Message from Data base tables
Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarathHi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY -
Hi,
We have Idocs where the correct error message is obtained after going to WE02, clicking on the icon next to 51 status and then on the next screen clicking on the application log button.
We have hundreds of Idocs in failed status and want to view the error messages, displayed after clicking on the application log button. Is there an easier way to do this, where I can see the error messages of all the Idocs at one shot rather then going inside each and everyone of the Idocs?
Any help would be appreciated.
Regards,
MickThanks Chandra.
But this FM will give me the error message that is displayed after you click on the icon next to 51 status.
The requirement is that after you click on the icon next to 51 status, on the next screen click on the application log button. We want to see the error message displayed here.
Also as mentioned earlier we have hundreds of Idocs in failed status and would like to see the error messages at one shot and not one idoc at a time.
Regards,
Mick -
Please help me with this error message when processing IDOC.
Message no.AM034 : An address has already been created for this handle.
I have checked the sales order and delivery, and there is no duplication.
Can anyone tell what is this error message means?
TQHello Sreelakshmin,
Please refere to the following SAP note : 651008
Hope this will help,
Best regards,
GL
http://newitbizz.blogspot.com/ -
To see most of the EDI IDOC errors, we need to go into additional log to check that, is there any report were we can get list of idoc errors in one go for the users
Can any one tell me the tables which get updated when error shows up
pls help
vinThe tables are EDIDC (IDoc control segment) and EDIDS (Status messages). From EDIDC you can select IDoc numbers that have errors (check STATUS field) and then link EDIDS by DOCNUM and STATUS (note that there might be multiple entries, you may use additional criteria to skip what you don't need).
If you need the segment data then the table is EDID4 (or could be another number depending on the release).
Hope this helps. -
Dear all,
When i am manually create a direct request for POS outbound, the system shows the error message as below. It cannot generate an outbound idoc. Do anyone know how to detect this error and how to solve this problem?
Error message:
Processing Status
Recipient: XX01
IDocs created
None
Trigger file for status ID: 00000000260056
does not have to be created No messages needed
Thanks and regards
ChrisDear all,
i have solved the problem. thanks you for your attention.
Chris
Maybe you are looking for
-
I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created wit
-
Having trouble making the converted pdf to word file work properly under word commands and formatting that have worked for me well in the past. Please help.
-
I want to display invoice details(MIRO) in REPORT
Hi, i am new for abap can any one please send code for to display miro details in a report based on below logic. Pass the RSEG-BELNR & RSEG-GJAHR joined together into BKPF-AWKEY to get the MIRO Doc date BKPF-BUDAT, vendor invoice number BKPF-XBLNR
-
11g install and Ultra Seach error
I installed 11g and just tried to create a brand new database and got those errors: ORA-06512 at "WKSYS.WK_ERR... ORA-06512 at "WKSYS.ADM"... ORA-06512 at line 1.. I pressed ignore and the installation finished. Is it important to fix those issue and
-
Running instances with different character set WE8MSWIN1252 and AL32UTF8
We have db instances running AL32UTF8 character set and our applications are built around it, however we have request to create instances using WE8MSWIN1252 character set for another application without bringing in new h/w (server). what are the ways