Idoc Error-Price without service not allowed

Hi Experts,
I have a Service PO with Acc.***. P .One service item entered in PO with price.When I go via ME22n & change the Price of Service item under services tab,its fine.
When this is done via Idoc generation(Msg.Type PORDCH) using standard FM BAPI_IDOC_INPUT1, it creates another service line item for the new price.
The first line item cannot be deleted via IDOC posting.Gives error "Price without service not allowed"
This is quite Urgent.Immediate reply is highly appreciable.
Regards,
Jagan

Hi,
Check in WE42, for the process code, you have assigned this function module and given the correct process code in the partner profile.
Sujay

Similar Messages

  • IDOC error 51- Function module not allowed:

    Hi,
    I am getting following error in IDOC inbouond.I verifyed all parameters mentioned in error.
    Issue still not resolved.
    When debugged from WE19 this issue dosnt arise.
    Kindly guide.
    Function module not allowed: ZIDOC_INPUT_MATCLASS
    Message no. B1252
    Diagnosis
    The function module ZIDOC_INPUT_MATCLASS and the application object type BUS1001 which were determined are not valid for this IDoc.
    Procedure
    1. Please check that the process code in the inbound partner profile is correct.
    2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
    3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.

    Hi,
    Check in WE42, for the process code, you have assigned this function module and given the correct process code in the partner profile.
    Sujay

  • Idoc error 51 - "Function module not allowed - APPL_IDOC_INPUT1'

    Hello everyone,
    We are uploading GL balances from legacy to SAP using the LSMW Bapi
    object - bus6035
    method - post
    message type - ACC_DOCUMENT
    Basic type - ACC_DOCUMENT03
    When we run the lsmw, idoc is created, however with an error 51 saying
    "Function module not allowed - APPL_IDOC_INPUT1'
    The partner no. is the logical system (the system on which the lsmw is executed)
    In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
    Please let me know if we are missing something or doing anything wrong ?
    Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
    Thanks,
    Sushil Joshi`

    Hello Sushil
    The long text of message B1(252) is quite informative for error analysis:
    NA B1252
    Short Text
         Function module not allowed: &
    Diagnosis
         The function module  and the application object type  which were
         determined are not valid for this IDoc.
    Procedure
         1.  Please check that the process code in the  inbound partner profile
             is correct.
         2.  If this is the case, you should check the ALE inbound methods ALE
             inbound methods for the process code and see whether the specified
             function module and application object type are correct.
         3.  If this is also the case, then the function module and the
             application object type are not permitted for the logical message
             type, message variant, message function and basis type that are
             contained in the IDoc control record. You should check whether the
             correct values have been assigned to these fields in the control
             record. If they do have the correct values, then the assignment to
             the function module and the application object type needs to be
             maintained.
    On ECC 6.0 this long text contains 3 transactions for analysis:
    - WE20
    - BD67
    - WE57
    Regards
      Uwe

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

  • When trying to make purchase I am asked to improve apple security by setting up 3 questions.  I have tried many times with out success.  Apple always returns an error without identifying what the error is.  Will not allow me to advance without setting up

    Apple is requiring the establishment of 3 security question (increase online security), but coninuously gives an error without identifying the error.  I am not allow to proceed or bypass and cannot use any apple store features.

    Exactly when does this error occur?  What is the exact wording?

  • EDI Error : Condition EDI1 is not allowed as item condition

    Hi EDI Gurus,
    Right now I am getting the error while creating a Sales order through IDoc.
    "Condition EDI1 is not allowed as item condition"
    Clarify a few things to me:
    1. Where to pass the Customer Expected Price on the IDoc.
    2. How to maintain pricing Condition EDI1. (If it is necessary for processing of sales order)
    Please clarify these two things.
    Thanks,
    Matt

    I ran V/O8 transaction. There were a bunch of procedures listed in it.
    I was not sure which procedure I should look for EDI1 pricing condition.
    I checked RVAA01 (Standard) - there are two conditions EDI1 and EDI2.
    I am not sure what I should do. Whether they are already configured or not I am not sure.
    If they are already configured, why is it giving error in EDI process.
    MxG,
    Please enlighten me.
    Thanks,
    Matt

  • MySQL Connection - Select Database - HTTP Error Code 405 Method Not Allowed?

    We've set up a MySQL database with our host and can connect to that, and create, edit, delete tables using HeidiSQL, without a problem.
    However when we attempt to set up the connection in the Databases tab of our Applications panel in Dreamweaver we receive the following error:
    HTTP Error Code 405 Method Not Allowed
    We have entered the following in the MySQL Connection box:
    Name: <name of our connection>
    Server: <IP address of our database>
    Username: <our database username>
    Password: <our database password>
    Database:
    When we click the "Select" option next to the Database field, that's when we receive the above mentioned error.
    We noticed that there was a fix posted by Adobe at:
    http://www.macromedia.com/support/dreamweaver/ts/documents/err405.htm
    ...but that link is long since dead, however it does seem to indicate that Adobe are/were aware of this issue.
    Can anyone help?  We're trying to move from Classic ASP / MSSQL to PHP / MySQL but have hit a barrier right from the off, which isn't very encouraging.  Hope someone can ease our concerns with PHP and MySQL.
    Much appreciated.
    NJ

    Thank you SnakEyez02.
    I had the Testing Server set to Local/Network but didn't have MySQL installed locally.  Changed that setting to FTP and it picked up on the database correctly.
    When using MSSQL it doesn't matter whether you choose Local/Network or FTP it just picks up the online database regardless.  I guess this must just be a difference between it and MySQL.
    Thanks for the advice.  Much appreciated.
    NJ

  • Reg : "Error multiple Receivers are not allowed for Synchronous calls"

    Hi All,
    Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

    Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
    The source message has to be a RFC request message interface and target should be RFC response message interface.
    Also you can use three step mappings in a single interface mapping.
    1. from your request message to RFC request message mapping
    2. java mapping which will do the lookup and give you rfc response back
    3.rfc response to your target response mapping.
    PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
    To help you further
    The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
    http://knowhowsapxi.synthasite.com/rfc-loolup.php
    Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

  • Error: Admin users are not allowed to have override security

    In shared services, I provisioned the users FDM "Provision Manager" access. When I log on to FDM application, I see all those users have administrator privileges. When I tried to change the security level, it is throwing an error
    Error: Admin users are not allowed to have override security
    How can I create users who are not as admin in FDM? The user guide dont seem to help me much in this regards.

    All you need to do is make sure there role is set to an Intermedate role 1-9 and not Administrator. I would suggest you do the following.
    1) Log into FDM as the main admin user.
    2) Go to user maintenance and delete all users who are not meant to have adminstarator access but can still access everything like admins.
    3) Go into Shared Services and check that these users are provisioned for FDM with one of the Intermediate roles only.
    4) Once confirmed re-add these users back in the FDM user maintenance screen by selecting them from the new user dropdown and give them the appropraite location access.
    5) Log off FDM as the admin user.
    6) Log in as the intermedaite user and tes tthe access

  • I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so

    I am trying to update my software through the app store but for some reason an error occurs and will not allow me to do so. And when i go online to log into my apple id account it states that there is an error. Can someone help me solve this issue, its annoying me?

    Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
    (123935)

  • In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in

    Hi,
    In MIRO screen, if clicked on 'TAX' tab  error 'Entry of tax not allowed in current account line' is displayed. Message number FF847. What may be the reason for this error message?
    Entry of tax not allowed in current account line
    Message no. FF847
    Diagnosis
    If you enter a tax amount in the current account line, the system does not allocate the amount to one tax code, but instead to all tax codes that exist in the document. In this case, the amount needs to be split up using the rule-of-three procedure. The sum of the computed taxes of all tax codes is used as the comparison basis. If each of the computed tax amounts of all tax codes equals zero, the system uses the sum of the tax base values as the comparison basis.
    System Response
    If the respective comparison basis equals zero, the system issues an error message.
    Procedure
    Go to the tax screen or tax tab page and enter the appropriate tax amounts for each tax code.

    Hi,
    Please check SAP Note- 1551857  for the same.
    Other terms
    FF707, FF716, FF796, FF847, FB70, SAPLTAX1
    Reason and Prerequisites
    There is a program error.
    Solution
    Implement the program corrections.
    When you choose "Cancel" on the tax screen during posting or simulation, the system returns to FB60 or MIRO again.
    The message FF 847 on the "Basic data" tab page is suppressed for company codes with jurisdiction codes if no expense items exist.
    Hope this will resolve your query.
    Regards,
    Sandesh Sawant

  • ERROR: NO_GUEST: Guest login not allowed from client startup

    we are getting the following error with express 6.3.4 when connectting to the express server from Objects using a connection editor.
    The error message is
    Error #12150 in XPCUBE: Non-fatal (0300): Data Manager is unable to generate transmission.
    Error #10300 in XDMRESP: Non-fatal (0300): ERROR: NO_GUEST: Guest login not allowed from client startup
    Encountered similar error while calling from OLAP web application.
    In stored procedure XWD_RAMSTARTUP: The following Express
    Server error occurred: NO_GUEST: Guest login not allowed from
    client startup
    Which I believe is the same reason.
    Can you pls suggest what could be the problem and how can we over come this.

    In the Connection Editor, under "Relational Data-> Settings" did you check the "Personal Configuration" box?
    If you did, you should ensure the Authentication type is not set to "None".

  • Error Item Category 04000 not allowed in accounting transaction 0300/0001

    When we are posting a Incoming payment document with debit to -bank charges refund and bank account ,got the error Item Category 04000 not allowed in accounting transaction 0300/0001.
    Please advice.
    Edited by: mysap query on Feb 24, 2009 2:56 AM

    Hi
    This issue is related to document splitting.  Unfortunately I don't have access to an ECC6 system today so can't give you the specific solution, however you need to check the config settings in the following path:
    IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Classify Document Types for Document Splitting
    If you are unable to resolve this, you should ask for assistance from a FI consultant.
    Regards
    Kylie

  • Help - error : ORA-00984: Column not allowed here

    Hi,
    I'm writing a simple Java program to update values into Oracle tables. But getting error - 'ORA-00984: Column not allowed here' in the line - sql2.executeUpdate(acctTabSql);
    There is no column name used in 'insert statement - and referred suggestion here to resolve the error, but couldn't. Please write me how to resolve it. ?
    Here is the code snippet below.
    Thanks, Vasu
    T_ACCT
    ACCT_ID (PK) GEN INTEGER
    ALS_NBR:STRING
    STATUS_CD:STRING
    NOTE_DT:DATE
    int intVal1 = 0;
              int intVal2 = 0;
              Statement sql1 = oraConnection.createStatement();
              ResultSet rs = sql1.executeQuery("SELECT ACCT_ID_SEQ.NEXTVAL, APPL_ID_SEQ.NEXTVAL FROM DUAL");
              while(rs.next()){
              intVal1 = rs.getInt(1);
              intVal2 = rs.getInt(2);
              System.out.println("ACCT_ID :" + intVal1);
              System.out.println("APPL_ID :" + intVal2);
              sql1.close();
              Statement sql2 = oraConnection.createStatement();
              String acctTabSql = "INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT) " +
                        "VALUES (intVal1,'' ,'' ,'' ,'' ,'' )";
              System.out.println(acctTabSql);
    -/Error/-     sql2.executeUpdate(acctTabSql);
              sql2.close();
              Statement sql3 = oraConnection.createStatement();
              String applTabSql = "INSERT INTO T_APPL (APPL_ID, ACAPS_ID, STATUS_CD, ACAPS_PROD_CD, ACCT_ID, DCAPP_MSG_RECEIVED_DT) " +
                        "VALUES (intVal1, valappIdValue, 'EN', '', intVal2, '08/26/09')";
              System.out.println(applTabSql);
              sql3.executeUpdate(applTabSql);
              sql3.close();
              oraConnection.commit();

    Hi,
    make sure final statement is like :
    INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT)
    VALUES(intVal1,NULL,NULL,NULL,NULL,NULL)instead of
    String acctTabSql = "INSERT INTO VPDBO.T_ACCT (ACCT_ID, ALS_NBR, NOTE_DT, HELMS_NBR, SL_REF_NBR, BK_MSG_RECEIVED_DT) " +
    "VALUES (intVal1,'' ,'' ,'' ,'' ,'' )";Cheers,
    Avin ash

  • Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

    HI ALL,
    ERROR - Key figure <> 0 not allowed for unit ' '; see long text
    Diagnosis
        The unit/currency ' Source unit MEIN ' with the value 'space' is
        assigned to the key figure ' Source Key Fig. DIFF ' with the value '
        4240.000- '.
    System Response
        A key figure that is not equal to 0 and for which no unit/currency is
        set has an inconsistent data state. The data record is not processed.
    Procedure
        Correct the source data.
    Procedure for System Administration
    Please guide
    BR
    Prasad

    Hi ,
    First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
    1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
    2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
    3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
    4. Activate the DTP's (Both Normal and Error) .
    After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
    Ideally these records should be rectified in the Source system .
    Thanks
    Kamal

Maybe you are looking for