IDOC Error Raise.

Hi..
I have an outbound Configuration for my Delivery using the Message control technique in SAP.
Now,I am testing it manually by going in the transaction code WE15 (RSNAST00) and running it for my application object(Delivery Number).
If everything is smooth then no problem, but if there is an error at any place inside the FM (used to create an o/b IDOC) then I am raising an error with the statement "RAISING ERROR_MESSAGE_RECEIVED".
The poblem is that I want this message to be visible in the Output processing Log of my delivery document which is not taking place now.
How shall I approach this problem?
Thank You

Hi Srikant
Thanks again
But if you see inside the from NEW_DYN_PERFORM of the program RSNASTED, then you wll clearly see that even if the return code is NE '0' , still the error values are getting updated in the Table NAST.
So, I think it is something else that is preventing the error message.
however in the debug mode when the change the returncode to 999 then it shows me the message.
I couldnt understand the logic.
Thanks.

Similar Messages

Reg Sender IDoc error in PI7.3

Hi All,
I am facing the below error while triggering an IDoc from ECC to PI. I could see the error in SM58 and PI log as below:
[JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT, Managed_Application_Thread|XI_IDOC_DEFAULT Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: Commit fault: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.adapter.idoc.app, BC-XI-CON-IDO) Exception raised from invocation of public void com.sap.aii.af.idoc.inbound.IDocReceiverBean.onCommit(java.lang.String) method on bean instance com.sap.aii.af.idoc.inbound.IDocReceiverBean@24a49d74 for bean sap.com/com.sap.aii.adapter.idoc.app*xml|com.sap.aii.adapter.idoc.ejb.jar*xml|IDocReceiverBean in application sap.com/com.sap.aii.adapter.idoc.app.; nested exception is: com.sap.conn.idoc.IDocRuntimeException (raised by system |PI_AAE_IDOC)
Can anyone please help me on the same.
The resource adapter configurations are deleted and created again. Also the RFC destination is working fine.
Cheers,
Neethu

Neethu,
Can you check if you are able to ping PI from the TCP Ip rfc destination in ECC.
Also the program id in the RFC destination created in SAP should match program id in InboundRA
Also the gateway parameters in the inboundRA in PI should be set properly. If you are setting the Gateway to be PI gateway then enable Local to true. If you are using SAP Gateway then set Local to false.

Hi Ragarding....Idocs Errors, ODS Functionality

Hi Gurus
Pls Urgent
Can U explain the --> Idoc Errors....and how to solve
                          ---> Ods( Whether functionality...Addition / Subtraction)
                          ---> Ticket Procedure and how do maitain this
                          ---> how many views can be created in generic Extraction
pls do the needful
regds
Pandu

HI,
ODS : has overrite functioanlity where info cube has additive fucntioanlity.
So, every time we shud recommend ODS in between datasource and Infocube.
Another imp point is , if the datasource is not supporting delta fucntionality, how do we handle the situation? right.
So use ODS, from the datasource load the data till ODS and as ODS contains changelog with 0recordmode with before and after images, we can perform the delta functinality to the Cube.
Ticket procedure:
See, we have third party ticketing tools like Gremedy, clarify, lotus notes etc.
Ticket means- defect or issue in the data or application or technical object.
So user raises the ticket and it wil assigned to concerned technical resource by the helpdesk and based on the priority of the issue, technical peopel should resolve the issue or ticket with in the SLA(Service level aggrerment).
Views : View is nothing but a image of the tables.
So we can call up multiple tables in a view for generic extraction.
Hope this info helps.
Thanks,Ramoji.

IDoc error In case of ERS procedure, please enter terms of payment

Hi,
I tried to use BAPI_PO_CREATE1 to post purchase order. However, I encountered this error.
IDoc error In case of ERS procedure, please enter terms of payment
I passed the payment term in IDOC PORDCH. Segment E1BPMEPOHEADER-PMTTRMS has value filled out. This value is passed into the BAPI correctly but for some reasons, it got cleared out in the BAPI. Any ideas or suggestions would be greatly appreciated.
Thanks

Check
BAPI_PO_CREATE1 - E 06 436 In case of account assignment

IDoc Errors in ECC

Hi Experts,
what kind of IDoc Errors can occur in ECC for the scenario :
ECC sending PO to Ariba(E-commerce hub, using third party adapter) and in receiving back Order confirmation from it.
Thank you,
MK

Hi,
This depends on the design and landscape and also Disaster Recovery or High Availability Plan.
some hints:
1. Connection Problem: Because of timeout , unavailability of the Receiver system.
2. Data Problem may cause you the error in IDoC posting [ probably functional/Business Team should look into this]
3. User ID and Password Maintenance - it may hit sometimes
4. If any pre-requisite process is required to process this IDoC, then problem in the pre-requisite process will lead the problem
these all kind of problems you may face..
Rgds , Moorthy

IDoc Error 51 - Make Entry in All Required Fields

hi,
I am using a scenario where an idoc is being posted into an R/3 system from a legacy application. For some reason I keep getting Idoc error 51 (Document not posted).
Once I drill down further, the specific error states "Make entry in all required fields". Have checked to make sure all mandatory fields have been mapped and proper constant values have been specified.
But cannot seem to get rid of the problem. Could anybody help out in determining how else to troubleshoot this and identify the possible cause?
thx,
Manpreet

Manpreet,
What IDoc Type you are trying to post ? One way is debugging the inbound function module using WE19. The second option is talking to a functional consultantor who worked, what fields are needed for that particular IDoc.
I wouldn't care much about whether the IDoc is posted or not because, it is the ABAP ALE/EDI consultant's job to do that. The only way XI Developer is concerned is when it is not posting, ABAPer would tell what's missing.
Hope this info helps.
regards
SKM

File to IDOC - Error Inbound -56

Hi,
I am doing file to Idoc. (CREMAS01).. My scenario in
RWB is successful. But in R/3 it is shwoing IDOC
error :"EDI: Partner profile inbound not available".
I created Partner Profile in R/3(logical name of BS-
sender file). Still is shwoing Error.
Regards,
Mukharji
Message was edited by: Mukharji T

Hi Mukharji,
I hereunder give you the step by step procedure for File to IDOC scenario. Cross check whether you have done all these:-
SLD
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps you.
Regards.
Praveen

FRM-41837 Error raising tab page

Hi,
I've got a problem with my form. I have four tab pages but in some cases I need to hide two tabs and save the information of the other tabs , when I try to save the data in my enabled tab pages I'm getting the error: FRM-41837 Error raising tab page
Can somebody help me please?
Thanks in advance.

Hi Sarah,
Here's the deal, I have four tab pages and I need to hide two tab pages because of one or more conditions, the thing is I need to save tha data in my available tabs, I checked the code and I don't have any go_block or go_item sentence in my triggers that could be affecting but I'm gonna check the code again maybe is something else =(
Thanks a lot for your comments

Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

Hello ,
The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
Thanks in advance.
Best Regards
Sateesh

Dear Sateesh
Check this link where the same topic was discussed
[ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
thanks
G. Lakshmipathi

IDOC error while receiving

Hi Friends,
In my scenario, I have to receive P.O. message from partner in to my R/3 system.
I am using PI 7.1
When partner is sending me message I am getting error , "Only asynchronous processing supported for IDoc adapter outbound processg" in SXMB_MONI
I tried to find solution on sdn, and I got 2 related foroum,
Idoc Error
Re: No receiver could be determined. (File to Idoc)
But from this also I am not sure hw can i solve this error.
Please Suggest.
Thanks & Regards,
Brijesh Soni

Hi
For Error Only asynchronous processing supported for IDoc adapter outbound
IDOC adapter support asynchronous only,
Check Quality of Service in your sender adapter. Should be EO or EOIO, not BE.
This thread had same problem and resolved :
Re: No receiver could be determined. (File to Idoc)
In Your case QOS is BE. Plz check in your CC if and BE is by default..
If you use BE, HTTP expects a Response back and as IDOC does not support BE, you go the earlier error.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 21, 2009 3:14 PM

Thousands of IDOC Errors

Hi there,
I have recently configured workflow using SWU3 - Now suddenly there are about 10 000 new work items in everyones inbox - All related to IDOC errors.
I have made sure that the workflow administrator is set to a specific user, and in WE46, the IDOC administrator is also set.
Most of the wor-items are back-dated to about a year ago, way before the workflow was configured.
Firstly, why are all these appearing now?
Secondly, how can I get rid of them, or at least isolate them into only one persons inbox?
This is on our test system, so there is no need to investigate any idoc errors...

This is happening because you have made some program run in background while configuring SWU3 most probably the deadline program.
You can get rid of them by checking the Workflow Log and then investigating from where agents are getting determined and accordingly changing the agents to a particular user Id.
Reward points if useful

Possible bug: validation errors raise at table row and current row is lost

Hi everybody,
I've just implemented a simple test case against the HR schema:
1. Create Business Components from Tables: choose only Employees. That will generate Employees EO, EmployeesView VO, associations, viewlinks and AppModule with the following hierarchy: EmployeesView1 > EmployeesView2
2. Create a simple page with an ADF Table based on EmployeesView1.
3. Surround af:table with af:panelCollection
4. Add toolbar buttons to the af:panelCollection "toolbar" facet:
<f:facet name="toolbar">
<af:toolbar id="t2">
 <af:commandToolbarButton actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert" disabled="#{!bindings.CreateInsert.enabled}" id="ctb1" partialTriggers="t1"/>
 <af:commandToolbarButton actionListener="#{bindings.Delete.execute}" text="Delete" disabled="#{!bindings.Delete.enabled}" id="ctb2" partialTriggers="t1"/>
</af:toolbar>
</f:facet>5. Create a af:panelGroupLayout that encloses everything under af:form
<af:document id="d1" title="Employees">
<af:messages id="m1"/>
<af:form id="f1">
 <af:panelGroupLayout id="pgl1" partialTriggers="pc1:ctb1 pc1:ctb2">
...6. Delete the LastName field for any row in the table and click anywhere on the next row in the table. This will raise a mandatory field validation error. At this point, the selected row is the one you've just clicked on, but the focus (mouse cursor) is in the LastName field that raised the error.
7. Fill in the LastName field. Don't click on it; just write something, as the field is already focused.
8. Click the CreateInsert button
Result: The current row is still the one you clicked on before, not the newly created row. If you click on this new row to fill in its fields, validation errors raise for every mandatory field.
I'd appreciate any help on this. I can send you the test case if necessary.
Thanks in advance,
Barbara
Version
ADF Business Components 11.1.1.56.60
Java(TM) Platform 1.6.0_18
Oracle IDE 11.1.1.3.37.56.60

Hi,
if you
1. Select (click) a row to edit last name (don't edit last name though)
2 Press "CreateInsert"
Does this then make the new row becoming the current if nor errors are shown ?
Frank
Ps.: If so, please send me the test case. My mail address is in my OTN profile. Just zip the workspace and change the ".zip" extension to something like ".unzpme" because the Oracle firewall bounces all mails with zip attachements

IDOC Error V1 042 - Sales document X is currently being processed by user X

Hello Experts,
I am using the IS-Retail solution of SAP and I am facing a IDOC Error which keeps the IDOC in Status 51. I traced the Error Message and it was V1 042. I am using an Inbound IDOC 'SHP_OBDLV_CREATE_STO01' to create the STOs (Deliveries) using the POs and there is a locking issue of the PO giving error message 'Sales document XXX is currently being processed by user XXX'.
I have created a backgroung job using a program to post the STOs using IDOCs that picks up multiple files from Application Server and processes them one by one. Now when 2 or more files use the same PO then this error occus.
I added a couple of minutes of wait time between the file processing but that did not help.
Please let me know if you have faces same situation and what solution did you apply.
Regards,
PS

Hopefully you have fixed this by now, but for anyone else who might be looking at this problem. We had this problem and we had the 2 programs check to see if the other was already runing. If so the program would submit itself for a number of minutes, different for both programs, and then exit. We also, and just before this, checked to make sure that there were not 2 of the running programs running and if so to exit. This was necessary because re-scheduling could put a program in conflict with itself. I hope that this may help someone. We used the join V_OP and searched for the program name, not the job name.
Kevin

IDOC error in production server

Hi everyone,
I'm getting this error, when users trigger an Idoc:
Error while writing IDoc to file
Message no. EA084
Diagnosis
The IDoc was to be written to file
cocca3301\interface\output_idocs\1120549.txt
That was not possible because no authorization for writing to this file.
Procedure
Please inform your system administration.
Anyone has seen this before? in development and quality servers didn't happen this...
Thanks in advance. Helpful answers will be rewarded.

Not at all, I was talking with basis administrators about this problem for a long time. I'm pretty sure that it's all about folder permission. I think it's a matter of system, not SAP. But they said that's not the problem... I'm not 100% confident with that answer.
But, in order to keep idocs running, i found program RBDAGAIN, that reprocess the failed idocs. I put it into a job every 30 minutes. That solves my problem "temporary", until i solve the real problem.
I advice you to talk with your system administrator and/or basis, and check the group permission for the folder you are trying to put your files. If it works, please let me know.

Missing IDoc and recurring IDoc errors

Hi,
I would like to ask for a help or any ideas on below case.
We encountered almost everyday a number of generated IDoc errors and the number increases everyday. All of these IDocs has Status "51" (application document not posted) and description "EDI: IDoc 63120 does not exist, please check data".
This IDoc errors does not happen before. It only started when the IDoc 63120 was missing and we can't find it already. We don't know why this is missing and we really need to get rid of these recurring IDoc errors whcih increases almost everyday.
Your response will be helpful in solving my problem.
Thanks in advance!

Hi Juan Francisco Zurita Duque
KNREF : Customer description of partner (plant, storage location)
internal data type : CHAR
Internal length : 000030 characters
Position in segment : 040, Offset : 0906. external length : 000030
Use
Sold-to party number sent in by the customer in delivery schedules.
Use
The system uses this number to automatically determine the ship-to party.
Every thing good for ORDRE05 IN ECC6.0
Check your config settign related to Message type and idoc type.....once again.....
RR

IDOC Error Raise.

Similar Messages

Maybe you are looking for