Idoc Error Status 51 - " Transaction was terminated by the user"

hi gurus,
i have a problem with respect to T.code WE02. After i process the billing documents in VF04, i get error status notification in WE02 with Status 51 as " Transaction was terminated by the user". This error is not coming for all billing documents but for only some of the billing documents in that particular list. After reprocessing, the idocs are generating without any errors. what could be the possible reason for the intial error.
Thanks

Hi-
After reprocessing the idoc's the data comes ..
Idoc is a data carrier.i may get stuck in the TRFC's .
So after processing it gets pullled.
Hope u have understood the cocept behind this,.
Regards,
Vishwa.

Similar Messages

Error message "update was terminated" while cancelling the billing documen

Hi Experts,
Kindly can you advise on the following issue. We are getting the error message "update was terminated" while cancelling the billing document using transaction code VF11.
Note: The accounting document associated with the billing document is not posted and also note that we have done a check with the Basis team who has confirmed back stating they are seeing the udpate error for the user " ". The log says that the update was terminated because the user was trying to enter some duplicate records into the database.
We could observe that the cancellation document is not created and also we have confirmed with the FI that they still continue to have the billing document open in the customer balance statementu2026
Thanks for your help,
Mithun

HI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil

Call was terminated because the corresponding service is not available

Hi experts,
I've installed SAP NetWeaver 7.01 SR1 ABAP Trial Version. I'm following instructions given and the next step is to log into the system via web gui with this url: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. However I'm getting this error:
Service cannot be reached
What has happened?
URL http://localhost:8000/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
Note
* The termination occurred in system NSP with error code 403 and for the reason Forbidden.
* The selected virtual host was 0 .
I did some research and from what I've read I should activate a service trough so called SICF. After installation I've got only sap management console in wich I have this main NSP node, below that database instance and SAP system instance, I tried to logon to this system instance choosing "logon" from context menu but always with some errors. Now I'm stuck, please help.
Edited by: kotzi86 on Aug 7, 2010 5:43 PM

Hi,
You will need to login using SAPGUI for windows first and then execute transaction SICF and from there, activate this service.
Please install SAPGUI first on your machine and login using it.
Regards,
Shitij

IDOC ERROR Status 02

Hi,
I am getting IDOC Error status 02.
"Error passing data to the port".
I am using a file port and passing the data from IDOC to the file.
Idoc is getting created successfully but the file is not created.
Any idea?

hi
use tcode BD83 for reprocessing error idocs in outbound
in program
If you want to use a type T connection to start an external RFC server program, enter the name of this program here. Enter the complete path name if possible. You cannot use the command line to specify any parameters for the program.
Type T destinations are connections to external programs that use the RFC API to receive 'Remote Function Calls'. You must specify the host name and the pathname of the program to be started. The communication method depends on how you select the program location:
'Explicit' selection
In this case, the program is started either by the standard gateway program for the system or by the explicitly specified gateway (gwrd) via 'remote shell'.
Ensure that the computer with the gateway process can access the specified computer by entering '/etc/ping <host name>'.
In order to be able to start a program on another computer using 'remote shell', the target system must fulfil certain conditions. The user ID of the gateway process must exist and a file called .rhosts must also be present in the user's home diretory. The file .rhosts must contain the name of the calling computer. To check this, logon to the computer containing the gateway process with the appropriate user ID and enter the command 'remsh <host name> <program name>'. The <host name> and <program name> must be the same as in SM59. (If you call an RFC server program without any parameters, the RfcAccept call always returns an error code (RFC_HANDLE_NULL) and the program terminates at once.)
'Server'
By entering the 'server', you start the program from the SAP application server.
First, ensure that the program can be accessed from the SAP application server and that the SAP application server has the authorization to start the program.
To check this, logon with the user ID of the SAP application server (e.g. c11adm). If possible, go into the 'work' directory of the SAP application server ('/usr/sap/.../D.../work') and try to start the RFC server program manually from there. (As in the above case, if you call an RFC server program without parameters, the RfcAccept call always returns an error code (RFC_HANDLE_NULL) and the program terminates at once.)
'User'
By entering the 'user', the program is started by 'SAPGUI', i.e. under the user's ID and environment.
Ensure that you can access the program with 'SAPGUI'/'SAPTEMU'.
Ensure that 'SAPGUI' has the authorization to start the program.
To check this, simply call the RFC server program in your environment.
The function call can also be asynchronous (CALL FUNCTION ... IN BACKGROUND TASK DESTINATION ...).
<b><REMOVED BY MODERATOR></b>
regards
Nagesh.Paruchuri
Message was edited by:
Alvaro Tejada Galindo

Error message - "Update was terminated", while trying to confirm TO

HI,
I am trying to confirm a Transfer order using LT12.
I am able to finish the process successfully.
I also get the message - TO confirmed successfully.
However, the moment, i click the back button, I get the message - Update was terminated
Please advise, what causes the error mesage
Regards,
Santosh

Yes.
there is a third party system called Assist4. But data will move into it only after the TO is confirmed. SO right now we do not have any data in Assist 4. Its stuckup at SAP.
During analysis, it gives the information as the system is dividing by zero
Division by 0 (type P) in program "SAPLXTRK"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLXTRK" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ZERODIVIDE', was neither
caught nor passed along using a RAISING clause, in the procedure
"ADJUST_SAMPLE_NETWR" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the current program "SAPLXTRK", an arithmetic operation ('DIVIDE',
'/', 'DIV', or 'MOD') with a type P operand attempted to divide
by 0.
How to correct the error
The exception must either be prevented, caught within the procedure
"ADJUST_SAMPLE_NETWR"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
But there was no place, where there is this value Zero
So a bit of confusion here as to what could be the reason
Regards,
Santosh

Fill Idoc error status

Hi Folks,
I am trying to fill the IDoc error status when processing inbound ORDERS IDoc.
Code looks OK.
But i am not getting the IDoc in error status.
Pl look @ the code and let me know.
data: w_errtab like errtab occurs 0 with header line.
if condition fails.
move derrtab to w_errtab.
w_ERRTAB-ARBGB = 'IDOC_ADAPTER'.
w_ERRTAB-CLASS = 'E'.
w_ERRTAB-MSGNR = '902'.
w_ERRTAB-MSGV1 = xvbak-bstdk.
w_ERRTAB-MSGV2 = s_kunnr.
w_ERRTAB-MSGV3 = s_vbeln.
append w_ERRTAB.
DESCRIBE TABLE w_errtab LINES sy-tfill.
derrtab = w_errtab.
endif.
The IDoc status is still 53.
Thanks,
Matt

call customer-function '011'
         exporting
              dxvbak = xvbak
              docnum = idoc_contrl-docnum
         tables
              derrtab = errtab
              dxvbap = xvbap
              dxvbep = xvbep
              dxvbadr = xvbadr
              dxvbpa = xvbpa
              dxvbuv = xvbuv
              dedidc = idoc_contrl
              dedidd = idoc_data
              dxkomv = xkomv
              dxvekp = xvekp
              dyvekp = yvekp.
    describe table errtab lines anzahl.
    if anzahl gt 0 and input_method = 'X'.
      export errtab to memory id 'idoc_test_errtab'.
    endif.
    if anzahl gt 0 and
       xaprau eq 'D'.
      loop at errtab where arbgb eq 'VG' and
                           msgnr eq '219'.
        anzahl = anzahl - 1.
      endloop.
      if anzahl eq 0.
        refresh errtab.
      endif.
    endif.
    if anzahl ne 0
     and input_method is initial.
      perform determine_user.
      perform statusrecord tables errtab.   " This is place in which IDOC_STATUS table get filled from
                                            " ERRTAB. Please check whether your IDOC_STATUS have
                                            " the Error record 51 that you inserted
      call customer-function '010'
           exporting
                docnum      = idoc_contrl-docnum
           tables
                derrtab     = errtab
                xbdidocstat = idoc_status.
    else.
a®

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?

ADF error-"Row currency has changed since the user interface was rendered"

Hi,
I have created a ADf page and then created entity and view object for a table.
I have created fields which are binded to the the view object .
when i open the page after deploying it i get the following error
"Row currency has changed since the user interface was rendered. The expected row key was oracle.jbo.Key[]"
Please help me
Edited by: 798554 on Sep 28, 2010 10:45 PM

That's a common exception in ADF. If you click the browser back button, you can get this message. You could search for a solution in other posts, perhaps like that:
JBO-35007: Row currency has changed.. when Rollback fom a Dialog page
http://cn.forums.oracle.com/forums/thread.jspa?messageID=3913201
http://programming.itags.org/development-tools/68191/
You should also mention your JDev version!
NA
http://nickaiva.blogspot.com/

Error : A cycle was detected in the classpath of project

Hi, When I build a scheduler program, I get the below error
A cycle was detected in the classpath of project:
Error A cycle was detected in the classpath of project: EPD_APMDM_Dkmsted.com EPD_APMDM_Dkmsted.com
Error A cycle was detected in the classpath of project: EPD_APMDM_DLibWrapted.com EPD_APMDM_DLibWrapted.com
Please help
Thanks
Prabhu.M...

The issue has been resolved.
I was referring the jar files in 2 places , one in Wrapper and another in Portal DC.
I removed the reference from Wrapper and issue got resolved
Thanks

Error code -1 was returned by the Direct TDM driver

Everytime when I try to quit Logic I get the message "Error code -1 was returned by the Direct TDM driver". I can not quit Logic on the normal way, everytime I have to "force quit".
I use DAE and Direct TDM.
Any idea's how I can solve this problem?
G5 dual 2,7 Mac OS X (10.4.6) 4,5 GB RAM, Logic 7.2.1, PT7.1cs7, HD3 Accel, 192,2x96i, 96

I'v just received a mail from Waves:
The current OS-X 10.4.6 update causes problems with certain Waves plug-ins.
This happens when using the Mac automatic updates.
In order to fix it, please download Mac OS X 10.4.6 for PPC.
Install it and restart your computer.

ERROR CODE -1 was returned by the CoreAudio driver? help!!

Just been using my Mac and noticed that i get this crash :
"ERROR CODE -1 was returned by the CoreAudio driver"
The it says "The application logic Pro quit unexpectedly" ?
Am running Logic pro 7.1.1 on a 2Gb G5 2.3 Dual Core Mac with a MOTU 828mk2 - is this crash to do with the MOTU?
Secondly is anyone else using Kontakt 2.02 with Logic on a Mac? It seems a bit unstable and it doesnt trigger loops on the 1st beat of the bar of a sequence? Any ideas??
Apple G5 Mac OS X (10.4.5) 2Gb Ram, Logic 7.1.1, PTLE 7.0, 20" Cinema Display,

it could be the Motu driver if you have not updated it since upgrading to Tiger. here is a link
http://lasso.motu.com/downloads/filelist.lasso?&-Database=downloads&-Table=dldb&-Op=cn&product=firewireaudio&-Op=cn&platform=macx&-sortfield=date&-sortorder=descending&-search

Error code 1 was returned by the audio driver :( randomly!

hey all! ive been getting this messege "error code 1 was returned by the audio driver" almost every time i try and merge tracks, bounce track in place, bounce region in place, or mixdown stereo regions per tracks. NOT when i do a real song bounce though. i feel like im noticing my computer is taking a long time to copy audio files into logic projects...i dont know if they are related though. but this error code 1 thing has been hapening CONSTANTLY. the thing is...nothing has changed. i havnt installed or changed anything on my system. its happening on ALL of my old projects, and MOST of my new ones. ive tried disabling all third party AUs and it still happens. do i have bad ram? a bad drive? do i need to reinstall everything? thanks so much in advance!

Ok, I don't know if this solves your problem... but as for what was triggering the 'Error code 1' message on my computer... Here's the update.
After much troubleshooting, the cause of this error in my setup was the Highpoint RocketRaid 2314 eSata PCIe card.
The Highpoint RocketRaid driver is included in OS X 10.8 with no additional drivers / installers to run. However, it isn't compatible with the old driver when upgrading the kernel (ie. 10.6 - 10.8)
I was bouncing to an external drive connected through eSata to the RocketRaid PCIe card... error message. Time Machine backup connected through eSata... error message. The drives were being dismounted rudely, or losing connection momentarily and reconnecting, resulting in the error messages.
Here are the instructions from Highpoint tech support to manually uninstall the embedded driver, and then reinstall the old Snow Leopard driver for use in Mountain Lion (10.8)... which works as it's suppposed to.
1. Go the folder System > Library > Extensions >, look for the file HighPointRR.kext and delete that file.
2. Second, download the driver from the link below, then run the Un-install script to remove any previous installed driver.
http://www.hptmac.com/productfiles/bios_driver/hptrr-mac106-driver-v11...
Then re-install the driver, but do not reboot or restart the system.
3. Third, download the webGUI from the link below. And run the un-install script to remove any previous installed web GUI.
http://www.hptmac.com/productfiles/WebGUI-Mac-v168-091120.dmg
Then re-install the web GUI and reboot after installation is complete.
Once the system has booted up, open a browser and type URL to log into web GUI.
http://localhost:7402
User Name: RAID
Password: hpt
I hope that this helps someone!

Error Code 1 was returned by the Audio driver

Whenever I try to export a podcast to MP3 - using good quality, I get multiple errors. A little box pops up saying "Error Code 1 was returned by the Audio driver".
In the saved file there is a short one second pause wherever that particular error has shown up.
Has anyone experienced this error and knows of a solution? I am utterly clueless, not very experienced with Garageband at all...
Thank you in advance!

I'm getting this too, for the first time. I've got a project that I've used to publish a monthly podcast with and I've been opening, editing, and saving this project for a couple of years now.
Now, with GB '09, I'm getting this error. Not pleased.

"error code -1 was returned by the core audio driver" battery multi?

working on a track with NI's battery 3 loaded as a multi, eveyrthings fine. next day come to open the project and i get the following message:
"error code -1 was returned by the core audio driver"
everything is fine with the project except that in the channel where battery is loaded, the plugin name (where you insert the plugins) has a line strike through it, and the GUI wont open when you double click it?
i tried re-loading the plugin as a multi instrument but get the same error message, but it loads fine as just a stereo or mono plugin.
any ideas??
thanks in advance.

I just did a search using "search discussions" using the term:
"-50"
(use the quotes, because they're important when doing this kind of search)
It returned a lot of hits, and apparently you're not alone in wondering what this error means. Lots of people reporting it as an error in iTunes, and also something related to 10.4.9. But in the event no one here answers your question, I suggest you do the search yourself, slog through the results, and see if anyone's come up with an explanation that fits your scenario.

Error code -36 was returned by the Core Audio driver.

Hi; am receiving this error...
Error code -36 was returned by the Core Audio driver.
...but am not finding any info about it or how to fix/update the driver. Anyone have this error before?
thanks, Charlie

There is no such thing as a G5 Intel.
Error -36 is an "I/O error", could mean a lot of things, you should give more details:
• Does this happen during recording or playback?
• Does it happen again if you re-open the project/re-start GB?
• Does it happen with other projects too?

Idoc Error Status 51 - " Transaction was terminated by the user"

Similar Messages

Maybe you are looking for