Idoc exchange between SAP R/3 4.6C and AS/400

Hi
We need to develop an interface between SAP 4.6C and AS/400 Warehouse System. The users are totally new to idoc concept. I need some information where I can get information on how idoc can be created from by AS/400 warehouse persons ? What kind of middleware is needed, etc. ?
Hopefully in simple terms since the users are in South Korea.
Thanks!

Hi Dhanesh,
You can use SAP XI (Exchange Infrastructure) as a middleware to establish
the interface between SAP R/3 & AS/400.
The output of an AS/400 can be of any format, but that will be converted by
SAP XI into IDoc & will post the same in SAP R/3.
For information on XI, check the following PDF:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1ebea490-0201-0010-faad-a32dd753d009
http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
best regards,
Thangesh

Similar Messages

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

Difference Between SAP ECC. 6.0 and 4.6c

Hi
What is the Difference Between SAP ECC. 6.0 and 4.6c
with respect to module wise, like SD, MM, FI,
thanks
Satish

Hi,
There is lot difference between 4.6c and 6.0
1) ecc 6.0 coming with inbuild webdynpro , BSP it is not 4.6c
2) In ecc we have interactive forms concept where it was not there in 4.6c
3) 4.6c there is no unicode concept here we have unicode and non unicode
You can follow the link also
difference between SAP 4.6C and SAP ECC6.0
Rgds,
Suman

Difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft

Hi Experts ,
Can anyone tell me the difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft ?
Best Regards,
SK

SAP Netweaver Gateway 2.0 is a product for Exposing ERP data as OData for external consumption which is independent of any Microsoft product. Using this you can model OData services and Expose them for light weight consumption. You can use this in use cases where you just want to consume the OData in some client or so, and you do not want any kind of accelerators to help you in development or in your integration.
GWPAM is an interoperability framework from SAP that leverages SAP NetWeaver Gateway and Microsoft technologies enabling customers and partners to easily and quickly compose solutions that consume and extend SAP throughout Microsoft technologies for on premise and on demand deployment. With GWPAM you get components like
GWPAM Visual Studio Add-On,GWPAM Template,GWPAM Project,GWPAM Outlook Add-In which are very much Microsoft specific.

The relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6

A lot of APIs in Rebean\ Report Engine Java SDK are disfunctional in BI 4.0 and there is no replacement.
[Rebean Developer Guide|http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_resdk_java_dg_en.pdf] say:
SAP BusinessObjects XI 4.0 release, the Report Engine SDK does not support the following features:
u2022 Drilling in Web Intelligence documents
u2022 Building queries
u2022 Document and report editing
in [BI 4.0 Javadoc|http://help.sap.com/javadocs/bip/40/re/en/com/businessobjects/rebean/wi/package-summary.html]
there are a lot of javadoc with warning Warning: This interface is no longer functional from the SAP BusinessObjects XI 4.0 release onwards
I found another [Java doc for WebIntelligence 6.x|http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html].
http://help.sap.com/javadocs/boe/xi/re/en/overview-summary.html
This documentation covers the REBean Java SDK. The REBean SDK allows you to work with ** documents and explore the metadata layer.
not supported by 4.x,but supported by 6.x?
what's the relationship between SAP BusinessObjects XI 4.0 and WebIntelligence 6.x?
What version of WebIntelligence used by SAP BusinessObjects XI 4.0 ?

Web Intelligence 6.x is an old product that is currently out of support.
Crystal Enterprise 10 and BusinessObjects 6.5 were the last separate Crystal / Web Intelligence products just after BusinessObjects acquired Crystal Decisions. BusinessObjects XI was the successor to both CE 10 and BO 6.5.
It just so happens that the product name was carried over from the BusinessObjects side, but the versioning brand was carried over from the Crystal side. So 6.x doesn't mean a newer version of ReportEngine. Timeline:
ReportEngine 6.x -> ReportEngine 11 (XI R1) -> ReportEngine 11.5 (XI R2) -> ReportEngine 12 (XI 3.x) -> ReportEngine 14 (BI 4.x).
So you can see the evolution of the branding that led to the newest version being branded by the number 4.0.
The internal APIs being wrapped by ReportEngine was changed from 12 to 14, and thus not all functionality was carried over to 14.
Sincerely,
Ted Ueda

Difference between SAP R/3 4.6C and 4.7EE

Hi,
Anyone please tell me whats the Difference between SAP R/3 4.6C and 4.7EE
Regards
Gan

Hi,
It's a lot more than that and too much for stating here. Check the release notes at
https://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000429688&
Select R/3 and 4.7 in the nav pane.
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

IDOC exchange between different businesses

Hello.
I have the following 2 scenarios to design:
1.I need to exchange an IDOC from an SAP system in my landscape (I'll refer to it as MySap from now on), to an external SAP system (I'll refer to as EXT from now on).
2. I need to exchange an IDOC from EXT to MySap.
In both scenarios - the IDOC invloved has a user defined extension.
I also have a PI system in my landscape. while for now the external system have no PI of her own.
for each of the scenarios I would like to know the benefits of the external party using a PI of thier own.
for the 1st scenario:
1. MySap -> PI -> EXT
2. MySap -> PI -> EXT PI -> EXT
for the 2st scenario:
1. EXT -> PI -> MySap
2. EXT -> EXT PI -> PI -> MySap
What is the best way to desing each of this options?
Should I be using the IDOC adapter when sending the IDOC to the external system? (EXT PI or EXT)
How should I identify the structure of the external IDOC? should I develop it the same way in MySap? should I somehow have the XSD of the structure (how can someone export an XSD of his IDOC without a PI?)
Any suggestion will be welocme.
Thanks.

ii you wanted to transfer data between two SAP systems then you can directly send it through ALE IDOC/RFC in that case you have to check the firewall setup in your landscape...in such case but will not have good monitoring and message tracing capability....
with PI you can have monitoring and message tracing as well as all the capability and features of PI if you go through PI in between MySap -> PI -> EXT.
You have three options to integrate with SAP system through PI - IDOC/RFC/Proxy - if for your business case you have a std IDOC/RFC go with that otherwise go for proxy.
thanks
chirag

Roles/profiles for IDoc exchange between ECC & PI

Hi guys,
I'm using a IDoc->PI->File scenario and otherwise and I need to set up a communication user between ECC and PI for this IDoc exchange, but I don't want to use sap_all. Can you please tell which roles/profile to assign so the IDoc exchange would work?
Thank you,
Olian

http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value

Idoc "missing" between SAP and PI

Hi!
We have an issue with Idocs that are "missing" between SAP and PI. First 5 idocs were processed ok, then 3 went into yellow status. We have set up queue processing on this particular idoc type as there can be posted 2 at the same time. The problem started when 2 idocs were processed at the same time
What have been done
- SMQ1/2 in SAP system does not show any trace of these messages
- SMQ1/2 in PI system does not show any trace of the messages
- Message monitoring in PI does not show any trace of the messages
- SM58 in SAP system is empty
- SM58 in PI system is empty
What checks remain to find out where these Idocs are stuck?
Thanks!
regards Ole

Hi Ole,
Refer This link for IDOC Monitoring.
http://help.sap.com/saphelp_nw70/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
In this it is mentioned like
Main Tools
XI Runtime Workbench
Transactions:
u25CF     IDX1
u25CF     IDX5
u25CF     SXMB_MONI
u25CF     SM58
u25CF     SM21
using these we can monitor..
Thanks.

Workflow integration: internal mail exchange between SAP R/3 and SAP B1

With B1 integration technology is it possible to integrate the exchange of internal messages between users from SAP R/3 to B1 and viceversa?
How to perform it with B1i techology?
Thanks
Paolo

Paolo,
Just so I am clear on what you are asking ... can you describe in a little more detail what you are trying to accomplish? When you say "messages" do you mean messages that are transfered to the Business One Inbox?
If this is the case, this is currently not an out-of-the-box business scenario, but could possibly be created using B1i and the SAP Visual Composer.
HTH,
Eddy

Difference between SAP ECC IDES 6.0 and SAP NetWeaver?

Hello everyone!
I am a bit confused since I am also new to SAP world, so I would to ask you, we have a SAP IDES ECC 6.0 in our server here to our company, I was trying to see a little of SAPUI5 and in a tutorial a guy was using SAP NetWeaver Visual Composer.
1- But, what's the difference between the SAP IDES ECC 6.0 and SAP NetWeaver?
2- What are the other parts I am missing? Are there any other IDES or such a thing around those terms?
3- How can I get installed SAP NetWeaver?
4- I have also got some info about SAP ERP, SAP CRM, SAP MM, SAP BW.. And those?
5- What are they in term of software/patch/ide/plugin/addon... ?
Please, I really need an overview in order to make all the things clear in my mind,
Thank you!
Denis

Hi Denis,
SAP is a big umbrella where lot of products are developed and made to use in various industry solution like Engineering, Chemical, Retail, Oil & Gas. I used the term Solution to relate SAP application to these solutions.
SAP NW is comprised of following components SAP_BASIS, SAP_ABA, PI_BASIS and SAP_BW. In totality we refer this as NW stack.
SAP application will have underlying database like Oracle, DB2, MSSQL or MaxDB where actual business data is stored.
Please check link Products | SAP to have more insight of SAP products ,services and offerings.
Hope this helps.
Regards,
Deepak Kori

Difference between SAP CRM 6.0(2007) and 7.0 webui point of view

Hello Experts,
Please could you let me know the difference between SAP CRM6.0 and 7.0 in WEBUI point of view?
Thanks and Regards
Madhu

Madhu,
Here is some thorough documentation on how CRM 7 improved over CRM 2007 - http://www36.sap.com/germany/solutions/business-suite/crm/SAP_CRM7_Highlights.pdf.
Hope this helps.
Regards,
Amar.

Urgent: IDOC transfer between SAP R/3 and BW taking long.

We are extracting data from SAP R/3 4.7 to SAP BW 3.3.
IDOCS from SAP R/3 to SAP BW taking any where from 30 seconds to 3 minutes. Even though process immediate option is enabled for IDOC. IS there any thing I need to check with on event processing.
What parameters I need to configure to make IDOC's appear in BW faster.
I award points for all valid suggestions.

nagesh,
how about your BGD processes? do you have a lot of those too? check also the extraction times into BW - maybe there are times when you are trying to extract when the DB server is more strained than others.
also check via tcode SBIW->General Settings->Maintain Control Parameters in your source system. make sure that you entered the server name in the target server for batch job. also the max proc. will tell you how many DIA processes each extraction will use. if you have 10 extractions and you have this set to say, 3, then you'll need 30 free DIA processes. check the documentation for optimising the settings here.
ryan.

Data exchange between SAP SCM and an external java tool via JCo

Hi everybody,
the situation i am in is the following:
We are developping a java application for production planning using multi-agent systems. What I am currently working on is an integration concept towards SAP via JCo. I am using a SAP SCM System.
What i got is the following:
I got the JCo connection to SCM and I am able to execute BAPIs from Java.
Now my problem is the following:
We want to recognize a change in the SCM System, e.g. when someone added a new manufacturing order. What do I have to do for that?
Do I have to register a JCO.Server as a RFC Destination?
Do I have to use SCM EventManagement to handle the corresponding events?
In Java terms, what I want is a EventListener for some events - but neither do I know how the events are created nor how they are transferred to third party systems...
Anyone with a hint?
Thanks a lot!
Greetings
Jan

Hi Jan,
architecturally you will need to determine a point in the SCM application logic to understand that a relevant event has occurred and then issue a notification "message" - in your case it sounds like your system is directly coupled so it wouldn't exactly be a message but an RFC call instead.
On SCM itself all you need is the RFC-enabled function module interface (an ABAP development), a logical destination and a hook somewhere in the application logic to make the RFC call.
From a JCo perspective you then just have to implement an "RFC server" that responds to these RFC calls.
Most difficult part will be to find a suitable hook in the SCM application logic that doesn't modify any delivered SAP code but uses an enhancement technique like a BADI.
Anything you can share about your planned development? Is this specifically for a customer or are you planning on releasing a product?
Regards, Harry.

Is it feasible to do System copy between SAP r/3 4.7 and ECC 6.0?

Hello Everyone,
Please let me know is it possible to do a system copy between two different SAP versions( SAP R/3 and ECC6.0 ABAP stack)
Background:
OS: Windows 2003
DB: MSSQL 2005
Appreciate your response
Thanks,
Vadivambal

Hi,
We have done the system copy from production(till dec data) to sandbox and then upgarded from R/3 4.7 to ECC 6.0.
Now the upgraded server has a data till december and our functional team wants to have all data from current production(r/3 4.7) to Sandox (test upgarde m/c) for testing since some of new applications have gone live after dec.
Please suggest me how to we bring those data to test upgarde machine.
Will client copy help in this case?
Please let me know
Thanks,
Vadi

Idoc exchange between SAP R/3 4.6C and AS/400

Similar Messages

Maybe you are looking for