IDOC extraction from R/3 to BW

Hi Gurus,
Can you explain how to start extraction of IDocs when request number is given?
I can see the request numbers in WE02.
But I dont know how to extract the same.
Please help
Thanks in advance..

Hi,
Go into T-code BD87. in BW.
Find whether any idocs are having status as 64 or 51.
64 means stucked and
51 means failed while extraction.
if its 51 then u need to rerun the load.
and if its 64 then select that idoc in BD87 and there is a button (execute process) execute that idoc.Now this will be seen in SM58.
Process IDOCS Manually
&messageID=2311994
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/content.htm
Hope this helps.
Thanks,
JituK

Similar Messages

Idoc extraction from erp

Hi colleagues,
i'm trying to create xi scenario which transfers idoc from erp system to the xml file for the mdm system.
I've already created all the neccessary things in integration repository and integration directory. And now i got stuck with ALE configuration and sending idoc from erp system. Let me describe what i did in ERP:
1. I created logical system for reciever system (MYMDM)
2. I created rfc destination to my PI system (MYMDM)
3. I created port and associated it with my RFC destination (MDMPORT)
4. I created partner profile for MYMDM LS and add MATMAS message type as outbound parameter. I set MDMPORT port created earlier as reciever port there and choose the option transfer idoc immed.
5. I created distibution model (bd64) choosing CIVCLNT010 logical system as sender and MYMDM as reciever.
*CIVCLNT010 - logical system of ERP system for 010 client (the one i'm working in)
6. I'm going to we19 TCode and choose:
Reciever system: MYMDM
Reciever port: MDMPORT
Sender system: CIVCLNT010
Sender port: SAPCIV010 (to be honest i have no clue what should be here... but somewhere i saw it should be like SAPSIDSYSNumber so i did in this way)
I fill idoc with some data and click start outbound processing.
I get a message that idoc was sent to SAP system or external system.
BUT I cannot see the message in PI!
Actually after that i can find my message just in we05 IDOC's sent list and nowhere else
Could you please help me with this issue? Any help is very appreciated.
Thanks and regards,
Stanislav.

YEAH! I changed Sender port in we19 to the one i found in IDX1 TCode in PI for my ERP (CIV) system. It was called SAPCIV and not SAPCIV010 and now seems it works!!! I got the message in PI!
Thanks a lot, Suraj!
Edited by: Stanislav Shkodkin on Oct 26, 2009 1:51 PM

Extracting IDOC data from DB

I've got a requirement to list the material numbers of some failed IDOCs, but am struggling to get to the data.
I've tried doing a SQL trace, but this only gets me as far as being able to identify the IDOC numbers through EDIDC, and I need to be able to retrieve the segment data as well.
Does anyone know of a FM that would do the job?

Hi Chris,
After getting the IDOC numbers from EDIDC then you can use FM : IDOC_READ_COMPLETELY to read the IDOC segment.
[pls see in table parameter : INT_EDIDD-SDATA]
Regards,
Hendy

Extract from BSAS and BSIS in FI to BW

Hi,
Can someone please recommend a method of extraction from BSAS and BSIS to BW.Is there a standard datasource available for this or do we have to do it through Generic extraction?
thanks
Srishti

Hi Priya,
To avoid the complexity of converting XML's to Idocs without XI or ABAP programming you can easily go for the LSMW uploading.
I know your company does not want to use the LSMW process.However if you are trying with the XML ports for the XML to Idoc convertion it will further involve extensive coding and complexities.
On the other hand you can extract MDM data in simple Excel format and then use LSMW with simple mappings and conversion to upload this master data in ECC without much difficulty.
As to work with the MDM and ECC system data transfer avoiding both XI and Lsmw as the data transfer tools will make your scenario more complex and error prone with ofcourse the extra time factor involved.
Hope it helps
Thanks & Regards
Simona Pinto

Slow extraction from Source System

Experts,
I'm on the basis team and we're trying to figure out what we can do to increase the performance of a BI extraction from an ECC source system.
Our BI team is doing a Full extraction of Data Source 0UC_SALES_STATS_02 which has about 24 million records. This has been running for about 2.5 days and has only extracted 12.5 million records according to RSMO
I'm no expert on BI performance, but I'm trying to get there. One thing we noticed is that we have over 1000 Data Packages and each has about 11K records per package.
RSBIW "control params for data transfer" in the BI system is set as this:
LOGSYS     -- Max KB. -- MAX Lines -- Freq -- MAx PROC -- Target Sys -- Max DPs
OURBWSYS -- 20000 --          0             -- 10    --        3            --     blank        --   blank
OURECCSYS -- 20000 --          0             -- 10    --        3            --     blank        --   blank
Also we only see one background process running on the ECC system which is the Zprogram that was written to perform the extract.
We also checked IMG - sap netweaver - BI - links to other source systems - maintain contrl params for data xfer
Freq/IDOC = 10
pkg size = 50,000
partition size = 1,000,000
We are on NWEHP1 for our BI system
We are on ECC6.0 EHP3sp5 for our ECC system
We use Oracle 10.2.0.4.0 with it fully tuned
We also think we have all the correct tuning parameters in our ECC/BI systems. There are a few tweaks we could make but I don't see any glaring problems. All our memory parameters seem to be in line with what is recommended.
We do not see any kind of Memory/CPU bottlenecks.
Do you think the many data packages and small records per package is a problem?
Any tips to increase performance would be helpful, I'm still looking.
I saw this wiki thread and it mentions to look at tcode RSA3 in ECC system to monitor long extracts.   But I have looked at this and I have not figured out what all needs to go into the fields to correctly run this.
Any help you can provide would be great.
Thanks,
NICK

HI Nick,
This problem is due to the huge volumes of data and the job is ruinng from long time onwards, normally we will kill the job if it exceeds more than 8 hours time while extracting the data.
Please suggest your BI Team to pull data in small volumes by providing selections in info package. This will drastically redcues the time for extraction of huge data and will also not consume all the resources in system.
Please pass below links to your BI team as this is completely releated to design issue.
http://help.sap.com/saphelp_nw70/helpdata/en/39/b520d2ba024cfcb542ef455c76b250/frameset.htm
Type of DSO should be write optimized to increase load performance.
http://help.sap.com/saphelp_nw70/helpdata/en/34/1c74415cb1137de10000000a155106/frameset.htm
2. And at your end look for the table spaces of the PSA tables, may be it is execeeding its capacity and make it as automatic. instead of manullay assigning the space at the regular intervals.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 2, 2010 12:23 AM

Idocs missing from source system

Hello,
I am trying to extract data from R3 to BW. I am getting an error message in BI, No idocs arrived from the source system.
In SM58 system showing the message 'No service for system SAPECC, CLIENT 800 IN INTEGRATION DIRECTORY'. Please help on this issue
Regards,
Ramesh

Hi Ramesh,
Check whether the connection is proper between BW & R/3.
Goto your Source system> Right clcik> Check.
You can also check the following :
No Idocs arrived from the source system.
Idocs missing: No selection information arrived from the source system
Error when updating Idocs in Source System
Hope it helps!
Regards,
Pavan

No idocs arrived from sourcesystem

Hi,
Iam extracting sd ata from r/3 to bw side.in monitoring in status tab saying message like this no idocs arrived from sourcesystem.can any one give me ideas.
Thanku

Hi Chinnu,
It may be due to below reasons...
1. Check whether the Log Table is full in the BW side.
2. Check Whether the Connection to Source System is fine.
3. System might be busy , Many jobs running in system.
Go to Sm58 in Bw system , U will TRFC queue with enteries for each LUW . U can come to know why IDOC is not processed by looking at the error there . Also check whether the job is finished successfully in Source System. U can process the LUW in Sm58 manually from Edit menu entry ....
Assign points if it helps......
Regards,
Vijay.

Error while ORDERS05 IDoc transfer from R3 - PI - SNC

Hi Friends,
I am facing error in PI SXMB_MONI for ORDERS05 IDoc transfer from R3 - PI - SNC.
I have done all the configuration setup in Integration Directory for the Scenario, I am able to successfully send the IDOC for PO from R3 to PI but faced the following Error in PI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
*<SAP:Stack>Party and service not defined</SAP:Stack>*
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also I am unable to Configure Sender/Receiver ID in PI > SXMB_ADMIN > Configuration, as while defining Sender/Receiver unable to add the Interface for Sender(ORDERS.ORDERS05)/Reciever(ReplenishmentOrderNotificatio_Out) although I am able to see the same in Integration Repository.
Also In Main message(Part of the message) as shown below, I am able to see Vendor in PARTY Element of xml message for which I have created the PO
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>0050568F-24A0-1DDD-B9F5-3F6DD541FF93</SAP:MessageId>
<SAP:TimeSent>2009-01-21T10:55:20Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>SAPECC6</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">ORDERS.ORDERS05</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="SAPECC6" scheme="ALE#LI#LF">0000000006</SAP:Party>
<SAP:Service />
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">ORDERS.ORDERS05</SAP:Interface>
<SAP:Mapping notRequired="Y" />
</SAP:Receiver>
Please Suggest the steps needs to be done for resolving the Issue.
Thanks all...
Regards,
Nitin
Edited by: Nitin Patil on Jan 21, 2009 12:18 PM

Hi Nitin,
I completed the configuraiton but the PO came in PI successfully but stuck in PI with error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can you please help what is the problem , I am not able to find out.
Thanks,
Menaga

Extraction from 0HR_PY_1 error??????? pls respond immediately

i would need to extract data for payroll data from data source 0HR_PY_1 to BW based on the period of time say for example 01.2007 to 12.2007, the infopackage in Production is in full load i would need to initalise it to Delta. for this, i can first run full load for the period 01.2007 to 12.2007 then go for init of delta without data transfer and delta will be intialized and then select the radio button delta and go for delta extractions. this is what i need to do now.
for this i have extracted data from 0HR_PY_1 from R/3 to BW in full load, but in after extracting more than one crore records were extracted with a failure(red color status), it says that data is not extracted from correct client which seems to be wrong because only one client is maintained for R/3 Production and in RSA3 i could see no record for that data source, i wonder how those many records were extracted from ????.
and i also see the error saying "No assignment of payroll data to BW month". it is giving this error while extracting for the year 2007 but for the year 2006,2005 full load is done and it has not thrown such error.
do you think Assignment of payroll data to BW is compulsory, because i could see no assignment in R/3, if that is not done then how could 2006, 2005 years of data been extracted and when they are extracted i am not sure when and how they were extracted.

Hi,
Take a look on the notes: 585682,590957
With rgds,
Anil Kumar Sharma .P

Error while extraction from R3 : URGENT

While extracting from R/3 generic datasource(extracted through function module ) i am getting error as :
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
But when I am running the FM or the extractor checker it is giving actual records with our any error
Could you please help me what to do ?
No job log in job overview , only it is given Cancelled.

Some possibilities:
1. Replicate the data source and then try loading.
2. Check the RFC connection ; may be it is broken.
3. Check the update rules to see it is active.
Ravi Thothadri

Short dump error when extracting from one of the datasource in R/3 to BW

When extracting from one of the datasource I am getting the short dump. below is the source code of the same.
Source code extract
Get boundaries of next TID block
L_FROM_INDEX = L_TO_INDEX + 1.
IF L_FROM_INDEX GT NFILL. EXIT. ENDIF.
L_TO_INDEX   = L_TO_INDEX + L_BLOCK_SIZE.
IF L_TO_INDEX GT NFILL.
L_TO_INDEX = NFILL.
L_BLOCK_SIZE = L_TO_INDEX - L_FROM_INDEX + 1.
ENDIF.
Create hashed index on TID of TID table
CLEAR L_TH_TID_IDX.
LOOP AT TIDTAB FROM L_FROM_INDEX TO L_TO_INDEX.
L_S_TID_IDX-TIDIX = SY-TABIX.
L_S_TID_IDX-TID   = TIDTAB-TID.
COLLECT L_S_TID_IDX INTO L_TH_TID_IDX.
ENDLOOP.
Select TID block from STATE table
SELECT * INTO TABLE L_T_STATE
       FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
       WHERE ARFCIPID   EQ L_TH_TID_IDX-TID-ARFCIPID
         AND ARFCPID    EQ L_TH_TID_IDX-TID-ARFCPID
         AND ARFCTIME   EQ L_TH_TID_IDX-TID-ARFCTIME
         AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
       ORDER BY PRIMARY KEY.
Consistence check
DESCRIBE TABLE L_T_STATE LINES L_LINES.
IF L_LINES NE L_BLOCK_SIZE OR
   L_LINES EQ 0.
MESSAGE X097(SY).
ENDIF.
PERFORM DELETE_BATCH_JOB
        USING    L_T_STATE
        CHANGING L_S_TID1.
Update LUW-Status und Zeit
CLEAR L_T_STATE_IDX.
CLEAR L_TH_TID2_IDX.
CLEAR L_T_TID.
LOOP AT L_T_STATE INTO L_S_STATE.
L_S_STATE_IDX-TABIX = SY-TABIX.

Hi Pavan,
                 This is a table space error.
Regards,
rahul

TS3694 when doing a restore to try and solve a wifi problem with my iphone 5 i got past the point where the software was extracted from my phone but then an error message came up saying that the phone could not be restored because of an unknown error (301

when attempting a restore, as suggested, to try and fix a week wifi signal on my iphone 5 I got past the point where the sopftware was extracted from my phone but then an error message appeared saying that the phone could not be restored becase of an unknown error (3014). I have tried about 20 times to make it work after trying a number of suggestions I have seen online. My phone gives me know response accept showing a picture of the cable and the itunes symble an the screen permanently - please help

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

Error while extracting from BI source

Hi,
We are facing a wierd problem:
Scenario:
Loading data from one DSO to another DSO with the help of transformation
The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
Error:
Data package processing terminated
Error while extracting from source EPUD0002 (type InfoProvider)
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
Unknown error in SQL interface
Error reading the data of InfoProvider EPUD0002
Exception CX_RS_STEP_FAILED logged
Workaround:
We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
FYI...Our transformation has lots of abap coding ...
Addn Info:
SAP_BW 700 0010
BI_CONT 703 0005
SAP_BASIS 700 0010
Any help will be highly appreciated...
- Amit

There must be some bug in the code which is causing this issue.
try to debug it,
refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
/people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

Mass processing for inbound orders idoc's from file

Hi Experts,
I have an requirement wherein we need to process all the ORDERS idocs sent from a thrid party system to a particular folder in the SAP system. Now we use a custom programme which in turn calls fn module IDOC_INBOUND_FROM_FILE to process each file. Here if the fn. module IDOC_INBOUND_FROM_FILE hits an erroneous file (control record error) it issues abend message which causes to entire programme to exit leaving rest of the files in the folder unprocessed.
Let me know if there is any other function module or way to tackle this issue so as to process all the files.
Thanks & Regards,
Jimmy.

Add the exception ERROR_MESSAGE = 99 (or some other unique number) to the standard exceptions in the function module call in your custom program. This will allow you to trap the error and continue processing.

Stop Inbound IDOC's from being created

I want to stop inbound IDOC's for a particular partner (type LS) from being created in our R/3 system. Is there a way to do this? I am aware these can be stopped in the middleware, but this is not possible in our case. I am also aware that I can stop these IDOC's from being processed via the partner profile, however, there will be a huge number of useless IDOC's that will be created in our system and I want to avoid that.
Hence, I do not want the inbound IDOC's to be created in the first place even though they are transmitted to SAP. Is this possible?
Any inputs will be highly appreciated.
Thanks,
Raghu.

Hi Satwik,
Choose Idoc in WE02.
Get port name, Then in WE21 get RFC name.
Go to transaction SMQS - Here we can block this RFC instead of blocking the queue.
Thanks,
Anil

IDOC extraction from R/3 to BW

Similar Messages

Maybe you are looking for