IDOC Failed - Error massage Deficit of PU IR quantity
Hi
I am getting IDoc failed with erros massage "Deficit of PU IR quantity "
What could be the reason.pleaseadvice.
Thanks
Ajit K Barik
You need to provide more detail e.g. IDoc type, message number etc. Look at the data in the IDoc and try posting a document based on this. Usually you will get the same error and understand why you are getting it.
Similar Messages
-
IDOC Failed - Error massage Deficit of PU GR quantity
Hi All
Trying to post 102 (reversal) goods movement. The idocs are created on 8th June. On this date, the PO I504800-02 has deficit quantity of 16 units trying to post, however there is a 101 movement posted on 15th June for quantity 36.
Currently there are 40 units available in GR, the first two idocs (830393 & 830466) are trying to post 102 movement for 20 units each. Hence the first two idocs should get posted, but its failed.
Can you suggest me where it went wrong, even after reprocessing IDOC not got posted.
Please help.
Thanks
AjitSAP does not check for the receipt date when you do a cancellation.
However, it does not know which receipt you want cancel if you do not have a value in fields
LFBJA Material document year of the document to which the movement refers
LFBNR Material document no. of the document to which the movement refers
LFPOS Material document item of the document to which the movement refers
For more details and background see OSS note 109396 -
While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102"
Hi Experts,
While Posting 122 getting error M7021 "Deficit of PU GR quantity 2 EA : 1100000000 1000 G102".
Scenerio : Have received 4 peices of this material with Goods receipt using 105 document and want to return 2 pcs back to Vendor using 122 movement type and getting this error.
Please let me know the problem as when checked with OMCQ it is showing Warning but inspite i am getting error.
thanksHi Abhishek,
Please find enclosed the screen print for 122 mvt type and Document used is of 105 mvt type.
Material Document 5000000097 is used for return delivery.
Thanks -
MIGO M7021 Deficit of PU IR quantity 1,000 PU
Hi gurus,
i found the error M7021 Deficit of PU IR quantity 1,000 PU when i was trying to cancel a good receipt with movement type 102.
the situation is this:
1. i issued the PO
2. i made the GR for all the quantity of the order
3. i made the invoice verification on the GR for not the all value of the PO
4. i cancel the invoice verification
5. i cannot cancel the GR because of the error M7021 Deficit of PU IR quantity 1,000 PU
also, i can say you that the material is a "no-stock material" so the stock for the plant is 0.
Can anybody helps me?
regards
AndreaThere is:
1 PU ordered
1 PU in GR (Goods Receipt)
1 PU in IR-L (Invoice Receipt)
1- PU in SD-L (Subs. deb. log. IV)
Now i would like to enter a 1- PU for Good Receipt, so i would like to have a 102 movement with the cancellation of the GR material document, but the system shows me this error message:
Deficit of PU IR quantity 1,000 PU
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1,000 PU.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location -
Deficit of PU IR quantity 10,000 KG
Dear Friends,
this is chandra shekar, here i'm facing some problem with return delivery i'm doing return delivery from MIGO transaction by selecting return delivery after entering excise invoice no and reason for movement and goods issue indicator the system is giveing error like Deficit of PU IR quantity 10,000 KG when i have checked in mmbe the stock is there even though i'm getting this error plz help me in this .
regards
chanduHi,
case 1:
Check first whether you have processed the MIRO for that. If you have done the Invoice reciept for that PO, then based on your system messages system will not allow you to do the return delivery unless you first reverse the Invoice document.
if you dont want to return your invoice then 122/124 movt. type should be configured to allow return delivery even after Invoive reciept been created .
config.
OMJJ---> Click details of Movt. type 122/124, activate the indicator Reverse GR despite of IR.
now you try to make return delivery.
case 2: If you have not created the IR , then make the return delivery, at Item level of MIGO where tab , change the stock type like un-restricted/quality/block where material qty is presence.
you follow the above steps given , hope this piece of info. will help you to resolve the issue.
Cheers........
manoj singh -
Automated error email notification when outbound IDOC fails
Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification. -
IDoc failed with the error massaeg "Instance of object type could not be ch
Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
AjitHi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit -
I am using Cisco1941W.
When I connect CliantPC to Wireless(1941W) I got bellow massage from 1941AP.
"%DOT11-7-AUTH_FAILED: Station 0011.f596.eecb Authentication failed"
And I couldn't ping from my PC to AP and Router.
Its possible communication from AP to Router.
I show 1941AP configration.
Could you find wrong?
By the way, my PC connected to AP by 108Mbps.
But my PC supported only 802.11a/b/g .
My PC use Static IP Address and use TEST-2 ssid.
I couldn't find error from my PC.
(start)
hostname TEST
enable secret test
aaa new-model
aaa group server radius rad_eap
server 10.73.12.2 auth-port 1645 acct-port 1646
aaa session-id common
dot11 syslog
dot11 ssid TEST-1
vlan 100
authentication open eap eap_methods
authentication key-management wpa
mbssid guest-mode
dot11 ssid TEST-2
vlan 200
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii testtesttesttesttest
dot11 aaa csid ietf
username Cisco password 7 05280F1C2243
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
no shut
encryption vlan 100 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
ssid TEST-1
ssid TEST-2
mbssid
antenna gain 0
station-role root
interface Dot11Radio0.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
no shut
encryption vlan 100 mode ciphers aes-ccm
encryption vlan 200 mode ciphers aes-ccm
ssid TEST-1
ssid TEST-2
antenna gain 0
no dfs band block
channel 5180
station-role root
interface Dot11Radio1.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 5
no bridge-group 5 source-learning
bridge-group 5 spanning-disabled
no shut
interface GigabitEthernet0.100
encapsulation dot1Q 100 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.200
encapsulation dot1Q 200
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
interface BVI1
ip address 10.73.12.7 255.255.255.0
no ip route-cache
ip default-gateway 10.73.12.1
ip http server
no ip http secure-server
radius-server deadtime 1440
bridge 1 route ip
(end)
I guess errer massage is telling Radio Frequency error.
I tried to change configuration "speed".
But still get error massage and I couldn't ping from my PC.Thanks, leolaohoo.
> My PC use Static IP Address and use TEST-2 ssid.
so I use TEST-2.
in this case, ignore TEST-1.
I just paste real configuration.
I tried to connect again.
But still I can't ping from PC to AP.
I use other PC.
I configured bellow.
-interface dot11Radio0
-speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
It was same resault.
Is cisco1941w broken?
I'd like to know one more.
I configured bellow, but I couldn't use 802.11a.
-interface dot11Radio0
-shutdown
how to use 802.11a(5GHz)? -
Idoc failed in Bi system "Could not find code page for receiving system".
Dear Experts,
i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
All the idocs have been successfully posted except one which is giving this error
Idoc status 02 - could not find code page for receiver system.
Please guide me
thanks
vamsiHello Vamsi,
check Note 647495 - RFC for Unicode ./. non-Unicode Connections
If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
Please check this thread - IDoc error - Could not find code page for receiving system
Hope it helps,
Thanks & Regards,
Amit Barnawal -
BPM where if a Idoc fails i need to resend it
hi all
I need to have a BPM where if a Idoc fails i need to resend it ..on the receiver side i m having a SOAP Adapter...
How can i do it...?
thanx
with regards
shivanjaliHi Michal
The receiver application is just returning an error message (e.g. locked) and expecting XI or ALE to deal with it.
Do we have to use BPM like for certain errors we re-submit message a number of times with a delay, and for others we raise an alert. any alternative for BPM by ALE ?
With Regards
Shivanjali -
IDOC AAE error:IDOC_ERROR_PARSE_FAILURE
Hello Gurus,
I am facing following error in IDOC AAE channel scenario is SOAP to IDOC we are using Integrated configuration.I have mapped all the attributes in the IDOC to 1 and date formats are fine.On Analsys i found for the IDOC Field MENGE is not accepting Decimal values when the value 868.000 is passed IDOC AAE is failing with following error.
When i pass with out decimal like 868 Idoc is posting successfully.
using connection
File_http://sap.com/xi/XI/System failed, due to:
com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to
idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException
occurred while parsing IDocXML for type :state=READING_FIELD_VALUE_TAG,
charPosition=441, lineNumber=1, columnNumber=442" tabIndex=0
ti="0" lsdata="{0:'Transmitting the message to endpoint using
connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
An IDocConversionException occurred while parsing IDocXML for type
:\nstate=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1,
columnNumber=442',7:true}" ct="TV"
bMarkedAsFocussed="true" bResetTabIndex="true"Transmitting
the message to endpoint <local> using connection
File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException:
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE:
An IDocConversionException occurred while parsing IDocXML for type
<Z2MAK075IDOC>:
state=READING_FIELD_VALUE_TAG, charPosition=441, lineNumber=1, columnNumber=442
I have explored through forum but i didnt find exact solution how decimal values can be handled in IDOC AAE .Please through some light on the issue any help is higly apprecaited.
Regards
Praveen MaareddyHi Praveen
Looks like it will not allow dot(.) or comma(,) .
Check this
A numc field will not allow you to post values like '.' or ',' to it. You need to get rid of the decimal point/comma. You can do that by multiplying the value by 100 or 1000... depending on your decimal places. Then it is possible to post that values to a numc field. A numc does allow only the numeric characters from 0 to 9. If this is not what you want (because you are dealing with an characteristic) you need to use a char infoobject or you need to use a keyfigure.
Problem with conversion char to numc in transference rules
You can change the data type of MENGE like below
result TYPE p LENGTH 8 DECIMALS 3. -
Hello Rescue Team,
I am facing the following error :\
16.06.2014 23:22:42.164
Error
Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.166
Error
MP: exception caught with cause com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Exception caught by adapter framework: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
16.06.2014 23:22:42.190
Error
Transmitting the message to endpoint <local> using connection EDISeparator_http://sap.com/xi/XI/EDISeparator failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZORDERS10>: state=READING_FIELD_VALUE_TAG, charPosition=526, lineNumber=1, columnNumber=527
and the payload transferred is as attached in the attachment below.
I have refered various blogs, however I am still not able to understand how to get the exact location of the error location..According to me, the value that is giving trouble is OTH in <BSARK> however I have checked the permitted values for BSARK on ECC and OTH is maintained.
Can you please help how I can resolve this error.
Thanks
SaurabhHi Guys,
This is solved..I corrected the date format of the ZZTIME segment from 1157 to 115700.
Thanks
Saurabh -
Idoc failed with status 51 for Warning/Information messages
Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilariif your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders -
Mails whenevr an inbound idoc fails
Hi Experts,
Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc
Regards,
ArnabHello Arnab
On SAP release >= 6.20 you have the standard report RSEIDOCA available which can be scheduled in background.
Unfortunately SAP did not provide an e-mail notification mechanism for this report but only workflow. For our company I created a ZRSEIDOCA report having this e-mail function. For more details please refer to
ALE Error Message Handling
e-mailing: How to sent out an email to the Managers OUTLOOK express account
Regards
Uwe -
Triggering a mail when ever a perticular inbound IDOC fails
Hi Experts,
Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc
Regards,
Arnabhi,
i think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
Workflow functions as follows:
A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
If an error occurs, the system determines:
1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
regards,
pankaj singh
Maybe you are looking for
-
Photo's are offline but in the same folder as before
Hello ppl, My English is not verry good but I'll try to descripe my problem: I use Lightroom for about 1 year, yesterdag I have re-installed my iMac and backupt the " Lightroom 2 Catalog.lrcat " and the " Lightroom 2 Catalog Previews.lrdata " Also al
-
IMessage working on iPhone but not on MacBook Pro or iPad Air
I Am getting increasingly frustrated that iMessage is working on my iPhone but not on iPad or MacBook Pro. I have tried settings system preferences, taking jabber off etc but still no joy. It's been two weeks now, can anybody help me please
-
I have somehow deleted the tool bar from the Firefox home page. How do I recover it?
I have somehow deleted the toolbar from my Firefox home page. How can I retrieve it, and hopefully my bookmarks, Tools, etc.
-
CRM - IS-M Central Address Management
Hi Guys, Can we integrate CRM (7.0) with IS-M Central Address Management. In IS-M trx. BP when creating a Business Partner address system validates against Central Address if this address exists and fill, for instance Postal Code. CRM can download st
-
I have an macbook pro A1260 and I have offer an hardcase to fit the laptop any ideas
I have an Macbook Pro A1260 and I am after an hardcase to place over the laptop. Have you got any ideas. I have brought Macbook Pro 15" hard case but is to big. Please help