Idoc failed with status 51 for Warning/Information messages

Hi All,
We are trying to create some Sales Orders with the help of Idocs. We are facing some problem as mentioned below.
1.There are some warning messages/information messages written in standard Sales Order User Exit USEREXIT_SAVE_DOCUMENT_PREPARE
2.As soon as the Idoc processing reaches any of these messages, it considers them as ERROR message and Idoc fails with the status as 51 which is not expected.
3.Also, I see that the Sales Order is saved with the data that has been passed in the Idoc.
Is this the standard behavior ?? (Or) Is there any EDI related configuration setting which can be used to suppress these kind of messages in Idoc Processing ??
Any help on this would be highly appreciated.
Thanks,
Babu Kilari

if your IDOC has status 51 then it is not posted, hence your sales order cannot be created from this IDOC. of course this error behaviour can be originated by the user exit.
please read OSS note Note 747631 - Some tips when testing idoc_input_orders

Similar Messages

  • Email on Idoc Failure with Status 56 64 68 69 70

    We have standard inbound idoc processing for Basic Type : DELVRY01 and Message Type : DESADV using the function module IDOC_INPUT_DESADV1.
    We currently have a requirement to send an email, when any of these type of Idocs fail with status 56, 64, 68, 69 and 70.
    Where would be best place to provide this solution to send an email to a particular user when the Idoc fails with the above status?

    Hello Saleem,
    One approach would be to consider workflow based on object type IDOCAPPL.  The start condition for the workflow could be the triggering of the event errorProcessCompleted.  You could filter further by status and your message type (DESADV ) to only start the workflow for the errors that you mentioned.  The workflow could then send an email. 
    You will need to verify the details for your own scenario.
    Good luck,
    Greg Kern

  • Suppress Warning/Information Messages in Idoc Processing

    Hi,
    Is there any way through which I can suppress all the warning/information messages in Inbound Idoc processing.
    I was trying to create some Sales Orders from Idocs. But, the problem is Idoc is getting failed with status as 51 and displays the status message as the warning/information message that has been written in the userexit. However, the Sales Order is getting saved successfully.
    Is there any setting through which I can override this?
    Thanks in advance.
    -Babu Kilari

    @ Brad....
    It is working in our development box and not in testing box. So, do you think this is an issue ?
    @ Bhat.....
    I tried the way you said. But, it didnt help.
    Any other help will be appreciated!!!
    Thanks in advance
    -Babu Kilari

  • IDoc failed with the error massaeg "Instance of object type could not be ch

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    All POs are get uploaded in SAP during Cut over activities only.
    Please suggest on this.It will be a great help.
    Thanks
    Ajit

    Hi
    After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
    Please help
    Thanks
    Ajit

  • Info IDoc received with status 8 in BI but Data available in source system

    Hello Experts,
    I am loading Budget Period (attributes) into PSA in BI.
    Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
    Data source: 0PU_BDGTID_ATTR
    This is full load.
    I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Already looked this thread and googled also.
    Re: IDoc received with status 8.
    Check points:
    sm58 - NO issue
    BD87 in ECC (RSINFO Idoc status: 03) -sucessful
    BD87 in BI (RSINFO Idoc status : 53)
    ST22 - NO issue
    sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
    I am not sure if I am missing any thing.
    Thanks
    Rana

    Hi all,
    I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
    For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
    RS3 (R/3) - > 0 data
    ST22 -> no short dump
    WE05 (Idoc) - > everything is ok
    I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
    Any ideas?
    Thanks
    jak

  • Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

    Hello,
    Any help on this issue would be greatly appreciated.  I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
    during business hours.  Looking into the event logs, I have found the following:
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066d9669a3e1c.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255.  The machine must now be restarted.
    The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user  for the following reason: No title for this reason could be found
     Reason Code: 0x50006
     Shutdown Type: restart
     Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255.  The system will now shut down and restart.
    I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
    A few hours later, the crash happened again, with a slightly different error:
    The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819.  The system will now shut down and restart.
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066fa9d74c5d7.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005.  The machine must now be restarted.
    The security package Kerberos generated an exception. The exception information is the data
    I have been unable to find a reason for these exceptions and the server rebooting.  Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again?  .
    Thank you,
    Ben

    Hello,
    Any help on this issue would be greatly appreciated.  I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
    during business hours.  Looking into the event logs, I have found the following:
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066d9669a3e1c.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255.  The machine must now be restarted.
    The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user  for the following reason: No title for this reason could be found
     Reason Code: 0x50006
     Shutdown Type: restart
     Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255.  The system will now shut down and restart.
    I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
    A few hours later, the crash happened again, with a slightly different error:
    The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819.  The system will now shut down and restart.
    Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
    time 0x01d066fa9d74c5d7.
    A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005.  The machine must now be restarted.
    The security package Kerberos generated an exception. The exception information is the data
    I have been unable to find a reason for these exceptions and the server rebooting.  Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again?  .
    Thank you,
    Ben

  • Idoc distribution with status of error records.

    Hi Gurus,
    my business requirement is i want to creat the Outbound Interface to distribute the data from sapserver to ESB server using the one userdefined function module, in this custom function module i written the logic to validate the input data if validation is file those error records are updated to one return table parameter and using the FM Master_Idoc_distribute for  create and distribute the sucessfull records. till its working fine (with status 30-ready to dispach, 01- idoc creatd is in we05 and i have done  the all configaration of message type creation, idoc type creation, port, partnerfrofil) ,
    but my requirement is , for example if in 10 records even one record is also error records then no need to distribute the idoc data to sending system,  just i want to send the idoc number with status error with error message.
    plese suggest me the appropriate procedure.
    Thanks & Regards,
    Sai Ram.

    Hi,
    in ur code ur filling the idoc data rcord, control record ryt ..before u append data to idoc data , u r also validating and u might be doing in loop for appening the idoc data.
    if there is any error in idoc then it won't distribute the data, it will be in error status only..u can only see the data in WE02. Then u can also change the data in WE02 and redistirbute it via BD87.
    if u have any conerns let me know
    Regards,
    Nagaraj

  • Info IDoc received with status 8 infopackage hanging in yellow status

    Hi All,
    when I extract the Text data without data selection it is fetching the 14 record into BW and changing the status to green,
    however when I go with data selection it has No record for this selection in RSA3 as well in BW .
    when I do this data selection in infopackage in BW it is bringing ' 0 ' records and hanging in to yellow status in RSMO for more than two days. it is not turning it to red/green
    it shows in Monitor with message " Info IDOC received with status"  in yellow status.
    I have found the OSS 713427, it is already had this correction .
    when I check in SM37 job is completed immediately.
    there is no short dump
    Many Thanks
    Ramm

    Hi Robort,
    thanks for reply
    there is no data for this data selection and there is no IDOC processed in BD87 or we02.
    I  checked out the note and its only for IDOC stuckup .
    may I have any other suggestion.
    many thanks
    Ram

  • CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005 in MPControl.log and MP is showing in critical state

    CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9005  error message in mpcontrol.log  and management point showing critical state in Monitoring-Site status
    Please help to resolve the same.

    Based on this thread ---> http://social.technet.microsoft.com/Forums/systemcenter/en-US/f66a8f0f-31df-49b1-b385-450c522aac0f/cmpcontrolmanagerpublishindns-dnsreplacerecordsinset-failed-with-status-9005-getting-this?forum=configmgrinventory
    a possible workaround is:
    1. Start DNS
    2. Navigate to following DNS SRV record: _mssms_mp_<SMS_SiteCode>._tcp.AD_FQDN
    3. Right click on this record; and add all MP Machines Account and provide Full Control permissions on this DNS SRV Record.
    4. Restart "SMS_EXECUTIVE" service on all MPs
    You will then see that each MP will successfully register each DNS SRV records successfully.

  • Putting a row into a pageable cache failed with error 9 and error message

    Hi Guys,
                 I am fetting the follwoing message when the job is scheduled.
    Putting a row into a pageable cache failed with error <9> and error message <Db::put: Bad file descriptor>
    I read the forum and Manoj has suggested to one of the forum member to change the size of the Pcache setting through the server manager. But I do not see the setting there. can any one please let me know where exactly I can see and increase the size of the Pcache.
    Thanks

    Hi
    I've had the same problem.  We know from other (more meaingful) error messages that we ran out of space for the Pageable Cache, but we've just increased it by 50GB and still get the same error.
    Anyone??
    Btw i don't think you there is a setting for PCache size - it will just use all the free disk you have on the drive where you have located the PCache directory.
    Richard

  • Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_

    Hi,
    Function module ZBAPI_DELV_HU_DETAILS is failing with status TARGET_METHOD_EXCEPTION external server. What could be the reason for this?
    This Function Module will be called within program ZMWXO011. This program will be configured in the output determination for HU's. It will be triggered whenever a relevant HU is created. The BAPI will extract Delivery & HU level data that is required by Exacta & Scan code and send to a predefined TRFC Queue.
    Thanks & Regards,
    Srinivas Reddy.

    Hi Efren,
    Go to transaction ST22 and check for any dump.
    The work item is in process, so there will be a dump in the system.
    The Function module parameters could be a problem.
    ST22 transaction will give you details about the dump.
    Thanks,
    Viji.

  • Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time when trying to set custom property.

    Sharepoint 2013 webDAV PROPPATCH fails with status code 409 error every time, when trying to set custom property.
    anyone have any idea

    Hi
    Stumbled upon the resolution myself. The Bean Area item needs to be set to Visible=Yes in the property palette for the bean within Forms Builder, and also the implementation class also in the bean's properties must match exactly the package & class name specified in the PJC (my full implementation class string had to be set to oracle.forms.demos.runApplication).
    As this bean has no user interface component, and since the Visible property has to be set to Yes, to avoid having a random square shape for the bean sitting on the form's canvas, I also set the Width and Height properties for the bean to 0.001. This does show a very small dot on the form, but that will be acceptable.
    So in summary there has been a change for PJC / Bean Areas between 6i and 10g Forms, in 6i you could have the Bean Item to be set Visible=No, and the SET_CUSTOM_ PROPERTY built-in would work, however in 10g Forms the Bean Item must be set to Visible=Yes for the SET_CUSTOM_PROPERTY built-in to work.
    Daryl

  • Profile Manager: Service has failed with status 500?

    I am getting a "Service has failed with status 500" error when trying to enroll a device with profile manager. Does anyone have a resolution for this?

    In OS X Server 2.1.1 there seems to be an error, according to: https://discussions.apple.com/thread/4365626?start=0&tstart=0

  • IDoc created with status 03 checked via we02, but couldnt find in XI

    Hi all:
        Could you please do me a  favor?  implement a idoc to idoc issue. it has been created successfully .
    as It is found that the idoc created with status of 03 -
    data dispatched to  port ok (rather than 12 dispatch ok). however, I couldn't find  it via SXMB_MONI on XI,  there must be something wrong . coudl you please give me a hint ?
        Thank you very much!!!

    hi,
    you need to check transaction SM58 (remove the user from it) and F8
    it might be the reason that you didn't create a port in IDX1 on XI/PI
    but you will see that in SM58
    Regards,
    Michal Krawczyk

  • IDoc received with status 8

    Hi Experts,
    Please find the below Error now i am getting.
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Please provide me solutions ASAP, this issue.
    Thanks & Regards,
    Bharathi.

    Hi Ananda,
    I have followed ur post, but same problem i am facing.
    The Error below following:
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Please give me any other solutions, how to resolved this issue.
    Thanks in Advance.
    Regards,
    Bharathi.

Maybe you are looking for