IDOC Failure due to warning message

Dear Members,
When we pass data from MDM to ECC through XI, most of the times the IDOC fails, the reason we found out is the warning message that we get when we create vendor manually from XK, FK transaction codes.
Warning message that we get in XK & FX transaction codes are :
EX: Are you sure you want to map the following customer to the vendor.
Because of above warning message the IDOC's are failing.
As we cannot disable those messages, can we do anything else; mostly at IDOC side to avoid those warnings and to successfully post the IDOC.
Cheers,
Cherry.

Hi Chen,
The message I get at IDOC
Status 68 :  Error No further processing  &
Status 51 : Application document not posted.
WARNING message which I get under XK03 transaction --> change, when I try to modify the customer is:
Customer xxxxxxx is currently not referenced and will be updated accordingly
Other details
Message no. F2293
Application Area f2
Message number 293
Main program  SAPMF02K
Include MF02KI00
Cheers,
Cherry.

Similar Messages

  • Idoc error caused by warning message

    Hi guys,
    I am using GLMAST idoc message for G/L account creation. Before the G/L account is saved, system shows warning message. Because of this warning message the inbound GLMAST idoc finishes with error (status 51).
    Is there any way how to solve the warning message by idoc processing?
    Normally when users creates G/L accounts manually they can confirm this warning message without any problem and the G/L account is sucessfully created.
    Thanks a lot for any idea.
    Petr

    Hi petr,
    You can do the debug the idoc using this T.code We19
    Provide the basic message which u created and provide the status number.
    U can solve the problem other wise predefined programs are there use that.
    Go through this URLs:
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Check these step-by-step links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
    Rewards some points.
    Rgds,
    P.Naganjana Reddy

  • BATCH JOB GETTING FAILED DUE TO WARNING MESSAGE

    Hi,
    Our background job is getting failed if we are having warning meesage , why it is happening , could any one provide inputs .
    In bacground it's considering Warning message as Error message .

    Hi Garima,
    CHange the code as follows:
    if sy-batch = 'X'.
    Message 'Error updating data !' type 'I'.
    else.
    Message 'Error updating data !' type 'W'.
    endif.
    i..e When executed in bckground display INFORMATION Message & in Foreground display WARNING message.
    Best regards,
    Prashant

  • Idoc Failure due to APO substitute part number

    Hi
    Scenario: Intercompany p.o for a part. Plant in newzeland buy from Singapore.
    In Sales Order and Delivery system proposes a substitute part number against P.O
    So when delivery is created the idoc failed due to the discrepancy of P.O and S.O partnumber (susbstitute in S.O). In S.O Reason for Material Substutution: Softpart Roll (APO): 9912
    Actual entered in P.O and substitute in S.O/D.O are enabled in both plants and material X plant status is C5 (New Product).
    P.O status - Invoice recieved but Not yet GR.
    SO Status - Delivery, Pick, PGI completed
    Can any one advise how to clear the failed idocs and understand the root cause.
    regards
    RG.

    Hi
    It may be a not decent solution and long term.
    As interim solution, once the substitute part arrived the recieving store at the buying instance, change the part number accordingly in the P.O (delete the old part number and add the new part number, and delete the output type to prevent any Idoc flow for the same order again.) and save it.
    Now the GR can be performed.
    regards
    GJ

  • Urgent: IDoc failures due to Chart of Accounts Not Found

    We are posting IDoc FIDCC2.
    The IDoc is failing with Error "G/L account 'XXXXXX' is not defined in chart of accounts XXX".
    We went into Transaction f.10 and can see the the G/L account setup correctly.
    I believe there is some configuration issue and these accounts are setup incorrectly. Please advice....
    thanks!!
    Ron

    Go to FSP0 and check whether the account exists in CoA.
    Hope that helps..
    Thanks,
    Nandita

  • Idoc failure due to movement type

    Hello,
    I am going through one process in whih i am recieving idoc from another system into SAP and this idoc will result in doing GR automatically.
    This time IDoc is getting failed and system showing error that Update control of movement type is incorrect (entry 101 X X _ L )
    What can be reason for this as i am using movment type 101.
    Thanks
    Himanshu

    Hi!
    Is it possible to copy here the contents of your idoc? specially the item data... something like:
    Segment Type - E1BP2017_GM_ITEM_CREATE
    MATERIAL AAA
    PLANT 1000
    STGE_LOC 0001
    MOVE_TYPE 101
    ENTRY_QNT 1
    ENTRY_UOM EA
    MVT_IND B
    Please, let me also know the idoc type you are using.
    Thanks!
    Esther.

  • A warning message in the Inbound part of the IDOC

    Hi all,
    A warning message is being displayed for the Inbound part of the IDOC.
    Here is the message.
    No filters , No conversion , No version change .
    IDoc successfully processed in the ALE layer
        The IDoc has passed through the ALE layer successfully and can now be
        passed to the application. This transfer is either done online or as a
        background job, depending on the settings in the partner profile.
        If there are no further status records, the IDoc waits for the next run
        of the transfer report to the application.
        Success or failure when passing the IDoc to the application is
        documented in the subsequent status records.
    Actions in the ALE layer
        The parameter 'No filters' indicates whether the processing in the ALE
        layer led to segments of the inbound IDoc being omitted. The important
        criteria here are the settings in the segment filter and in the
        distribution model for this sender.
        The parameter 'No conversion' indicates whether field values were
        converted in the ALE layer. This is the case if the IDoc contains
        organizational units to be converted, or if the ALE conversion tool for
        this sender is activated.
        The parameter 'No version change' indicates whether the IDoc was
        converted into an earlier version of the IDoc type. This happens if the
        IDoc type of the sender is different from its own IDoc type.
    I have checked all the necessary Config settings and all of them are in place.
    Your help on this will be highly appreciated.
    - Surya.

    Hi,
    The IDOC  may have successfully passed through the application, but check whether the status of the IDOC is changed to 53.
    No filters, No conversions, No version change
    occurs when the IDOC is not processed fully.
    It may have stopped the processing without raising any error...
    Check the program, whether there is any piece of code which stops the processing of the IDOC without changing its status to 51.
    Sharin.

  • Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

    Since uninstalling / reinstalling iTunes I am not able to sync iPhotos with my Apple TV with the following warning message stating that this is due to a 'problem on your computer. The disk could not be read from or written to'. Please help!

    Welcome to Apple Discussions!
    Is all the software on your computer up to date?
    iTunes
    iPod Updater
    Also, try The Five R's
    btabz

  • Vendor Payment TC F-58/F-53, warning message for selecting NON DUE invoices

    Hi,
    I have scenario with my client, they want that during manual vendor payment against  TC F-58&F-53, if the invoices are not due for payment but if selected by the user during manual payment, is there any configuration by which system will give a warning message to the user saying invoices are not due for payment before saving the document.
    Thanks
    MRS

    You have to find the appropriate "Message Area" and "Message Number" in "Maintain Message Control".
    Add the message into the Message Control and make it as WARNING message.
    << Moderator message - Point begging removed >>
    << Begging for points is against the furum rules. Repeated violation of forum rules can result in your userid being deelted. This is the third time you have been warned.>>
    Thanks.
    Edited by: Rob Burbank on Jan 18, 2011 3:57 PM

  • Warning message due to JSPDynpage

    Hi All,
    We have a scenario where in the jspdynpage we have only hyperlinks and One of the hyperlink is pointing to the standard uwl iview as follows
    [http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true|http://portalhostname:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwl_iview?sap-config-mode=true]
    We are on CE7.1 and whenever I click on this hyperlink of jspdynpage, the uwl iview opens but with a warning msg  at the header of the UWL as follows
      "Another administrator is currently customizing this application. If you want to customize, please restart the application later and try again"
    Same UWL iview when I open  thru Home ->Work->UniversalWorklist , it does not show this warning message.
    Is it bcoz of any session object inthe jspdynpage? any pointers will be of great help.
    one note & Observation
    assume that all the users are logout from the portal now any user first logged into the portal then that warnong message is not displayed at the header level of the UWL iView which we are accessing thru the hyper link from the JSPDynpage . but second user onwards any number of users are logged into the portal and click on the hyperlink in the JSPDynpage and it goes to UWL Iview where it is showing the above mentioned warning message at the header level. it is happening the same for the second user, third user and all users consequently but this warning message is not displayed for the very first logged in user.
    Can anybody replys then it would be great help to us . <<text removed>>
    when we access those links directly from the browser it is not giving that above specified  warning message but  this warning message is getting displayed when we access those hyperlinks from JSPDynpage .it seems there is some session related problem or something related to that. pls help.
    Thanks
    Bindu
    Edited by: Hima Bindu on Apr 22, 2009 6:40 AM
    Edited by: Matt on Apr 22, 2009 3:46 PM - please do not offer rewards

    Hi Michael
    Excellent !!  .our issue has been resolved.
    Thank you very much & Thanks a lot for your help.
    Can you please tell me what the reason due to with ?sap-config-mode=true in the URL...??
    can you please give me the reason why this warning message is disappeared by removing the ?sap-config-mode=true.
    Thanks
    Bindu

  • How to solve the INFREC Idoc failure with message type

    Hi,
    Please let me know how can we solve the INFREC Idoc with the message type" Not possible to set tax code without tax calculation schema"
    Pl suggest me how to tackle this Idoc failure.
    Regards
    Raj

    Hi,
    An\ybody..please suggest.. It is very urgent..
    Regards
    Raj

  • Warning message for customers past due on payment

    Hi experts,
    I need help to create a warning message (or popup alert) on the delivery for customers that are past due on their payment.  Please advise.
    Thanks,
    Jane

    Hi Jane,
    For all pop-up message, you need SDK. There is no simple solution for that.
    If you just need an alert, you can create user alert to be send in a scheduled time.
    Thanks,
    Gordon

  • FMLE failure warning message

    I am searching a method to send a warning message if the video stream broken or ip camera fail.
    I would that if the stream stop for any reason, a little script start, so I could send a mail or a sms
    Anyone has suggest about it ?
    I think it very usefull for long time streaming
    Bye
    Saverio Tozzi

    Next time it happens you may want to grab the services-messages.* and
    loader-messages.* from the server at the same time as the zmd-messages.*
    from the client to see the error at the serverside to synch up with.
    Thank you
    Susan
    "ipst13" <[email protected]> wrote in message
    news:[email protected]..
    >
    > Marc-Andre Vallee;1215758 Wrote:
    >> I'm getting once in a while, some message on device about upload
    >> failure...
    >> Upload Failure- uploading:{;C:Program
    >> FilesNovellZENworksworkinventory1126673ba4e18c7566 6ce7674cc83db5-delta.xml}
    >>
    >> but seems like my inventory is working ok.. I can browse it, generate
    >> reports and everything...
    >> might be costmetic, but fills the warning messages on the dashboard
    >>
    >> Marc
    >
    > FYI, I update to 10.1.2a and I still have this message on a regurlar
    > basis in the server messages.
    >
    > Anyone has a hint on this anoying type of message?
    >
    > thanks
    >
    >
    > --
    > Cheers!
    > ------------------------------------------------------------------------
    > ipst13's Profile: http://forums.novell.com/member.php?userid=20008
    > View this thread: http://forums.novell.com/showthread.php?t=272709
    >

  • Windows Fabric Warning messages and node failure

    Hi ,
    We have a service bus farm with 3 servers and sql installed in separate alwaysOn Instance.
    we are seeing some warning messages in Event Viewer:
    failed to send message Activate to node d917cb318cf36c4ce0867df57f2b57:130630848896673695 with error MessageHandlerDoesNotExistFault
    GetActivationContextAsyncOperation called for invalid HostType NonActivated
    Failed to update down node d917cb318cf36c4ce0867df57f2b57:130630848896673695: NoWriteQuorum
    6db0d54b0361b018fa1f1e939ae98:130661086276070299 failed to process ChangeNotificationMessage full:100000004 d198518aa4afbdced0ae254d6e0866:130630848890604274 d917cb318cf36c4ce0867df57f2b57:130630848896673695.
    Few more.
    Same time, we have seen that our wcf services wriiten to read/Write into queues of services bus throwing exception for Service Bus connection and it appears for small time. It is random in nature.
    Can someone help with reason for these warning and how to fix these.
    Regards,
    Kunal

    Here is the error that I get from services side:
    2015-01-19 03:39:53 - FATAL - OrderImportWorker - CurrentDomainOnUnhandledException - Unable to connect to Service Bus using HTTP connectivity mode.
    Microsoft.ServiceBus.Messaging.MessagingCommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException:
    Unable to connect to factory endpoint. -- Response:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
    <HTML><HEAD><TITLE>Service Unavailable</TITLE>
    <META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
    <BODY><h2>Service Unavailable</h2>
    <hr><p>HTTP Error 503. The service is unavailable.</p>
    </BODY></HTML>
     ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
       --- End of inner exception stack trace ---
       at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
       at Microsoft.ServiceBus.WebStream.Connect()
       at Microsoft.ServiceBus.WebStream.Open()
       --- End of inner exception stack trace ---
    Regards,
    Kunal

  • Warning Message in query result as 'Notification Number DBMAN 345'

    Hi ,
    I have a warning message while executing the query
    'Diagnosis
    Currently, it cannot be guaranteed that SIDs and master data exists for all characteristic attributes for the DataStore object to be read.
    There is a restriction on a navigation attribute of the listed characteristic in the query. This filters all characteristic values of the master-data bearing characteristic for which there is not yet master data out of the result.
    For performance reasons, this filtering is unavoidable.
    System Response
    Procedure
    In case of doubt, find other restirctions directly on the characteristic values of the characteristics contained in the DataStore object.
    Procedure for System Administration
      Notification Number DBMAN 345  '
    'i am getting this error because of cutomer exit variables  on navigatioanl attributes of  Omaterial'
    I tried supressing it in  RSRT.. but unable to find the message.
    I tried  debugging and assigning enhancement points in  FM  BAL_LOG_MSG_READ.. As it is standard function module its not suggestable to do..
    can we creat custom FM ?? will it be called if we  write code to supress warning message??
    Please let me know how to use  BADI'S  in order to supress the error message that appearing in query result?
    Thanks All.

    Hi,
    The warning is raised due to the following reasons:
      - you have a selection in the filter of a navigation attribute
      - in your DSO you do not use the option "SIDs Generation upon Activation"
    If the option "SIDs Generation upon Activation" is not flagged,
    you may get char.values for an Infoobject in the system not
    having any SIDs. As a result you may see in the report less data as
    expected.
    For example we have Infoobject A with its Nav.attribute B
      Infoobject A   Nav.attribute B
      12             13   ->> has a SID in the X-table
      11             10
      9              13   ->> has no SID in the X-table
    If you define a selection on B =13 in the query, you only get infoobject
    A with key 12 displayed in the result, since only B =13 has a SID
    in the relevant X-table.
    The warning refers to this behaviour and cannot be avoided unless you:
       - flag the option in the ODS-settings
       - or remove the filter defined on 0MATERIAL__xxxx
    Thanks,
    Venkat

Maybe you are looking for