IDOC Failure in  51 Status

Delins Idocs are getting failed in 51 status with error message<b> "save your changes first"</b>.
Please help me above mentioned issue

Sainath,
Can you try to make a change in the scheduling agreement in VA32 and save the document. I think there should be some problem with the document.
If you are able to save the document successfully, then you can try to re-post the DELINS IDOC's
May be some master data has been altered...
Regards,
Syed Nasir

Similar Messages

  • RBDMANI2 Idoc Reprocessing IDOC Failure Notification

    Hi SAP Friends,
    I developed an inbound interface for LIV electronic invoice(MIRO) with basic type INVOIC02. At present everything going smooth.
    i scheduled a background job with the program RBDMANI2 to reprocess the failed IDOCS. i.e if any failed idocs required SAP side changes, users will complete the changes. Then the scheduled job will process the failed IDOC.
    IDOC will process if corrected data is satisfying else IDOC will fail again with Status 51.
    Now the failed IDOC notification we are not getting any notfication.
    If IDOC is failing first time idoc failure notification will come. At that point Object Type IDOCINVOIC & Event INPUTERROROCCURREDMM is triggering.
    When i am reprocessing through the scheduled job of program RBDMANI2 , i am not getting any failed notification.
    Can anyone help me out where i am missing the event. i need to activate any other event linkage for the reprocessing.
    I tried with SWELS, i did not get any event when i execting the program RBDMANI2.
    Appreciate your help and valuable inputs.
    Thanks & Regards,
    Srinivas Bhavanam

    Srinivas, per my understanding the failure event is only triggered once. You can attest this yourself by executing the associated workflow.  If you select the process option and all errors were not addressed, the current work item remains active ; eventually the error message will be changed in case the IDOC is now failing for another reason.  There is only one workflow instance for the same IDOC  ; the failed batch processing does not generate any new workflow or IDOCs, it only updates the current instances (workflow) and add an entry to the IDOC status table (EDIDS)

  • IDOC FAILURE while sending data from ZEB_HCm systen to ZRA-EREC SYS

    Hi
    Experts
    I am having idoc failure while sending data from HCM SYSTEM to EREC systems.
    From that Data records i found the failure recored containing PERNR.
    and from status record the
    ERROE IS : No status information available for object CANDIDATE
    Message no. HRRCF0001073
    usually i used to run PFAL for these king of issues , when i tried to run PFAL for the PERNR it is giving the same errroe,
    So pls suggest how to send the data to resiolve this .
    Regards
    Suresh

    Hi Nitin,
    The IDOC when came in Erec system is in error status ( 51).
    When i saw the data records, only pernr were mentioned.
    Then i send the idoc thru PFAL again by sending all information as O-C-S-P.
    Still it is giving me the same error.

  • IDoc Acknowledgement to JDBC status update

    Hi,
    JDBC --> XI --> SAP R/3 (IDoc ACC_DOCUMENT02)
    JDBC <-- XI <-- SAP R/3 (IDoc ALEAUD01)
    I have the following scenario... I am reading data from a database using the JDBC Adapter. The data is in the following format at source. Using the JDBC adapter I read the database for rows for which the status is blank, this is multiple documents.
    Invoice 1 Status 53
    Invoice 1 Status 53
    Invoice 1 Status 53
    Invoice 1 Status 53
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    Invoice 3 Status <blank>
    Invoice 3 Status <blank>
    Using a BPM process I split the source data into multiple messages and map them to the IDoc structure. In the above example Invoice 2 & 3 would be read from the database and split into 2 individual IDocs to be posted separately into SAP.
    IDoc 1
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    Invoice 2 Status <blank>
    IDoc 2
    Invoice 3 Status <blank>
    Invoice 3 Status <blank>
    I now want to extend this scenario to include acknowledgement messages which I can use to update the status in the source system.
    I have configured the ALEAUD01 message in the destination system and scheduled the RBDSTATE program to run periodically. I can see in the XI message monitor that my messages now have aknowledgement status.
    What I would now like to do and hopefully someone can help is to use the status information being fed back from SAP in the ALEAUD01 message to update the status field for individual lines in the source table. Can anyone help with this step???
    Regards,
    Pete

    I can see the limitation of ALEAUDIT as it is handled internally in XI. Using the bespoke route I can create a copy of ALEAUDIT and a bespoke IDoc ZALEAUD01 for example, which will send the status idoc to XI.
    In BPM I can configure a receive step to receive the IDoc... But, how do I then relate the IDoc I created to the particular segment in my ALEAUD01 IDoc.
    Regards,
    Pete

  • IDOC is created with status 51( application document not posted)

    Hi experts
    iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
    but the IDOC is created with status 51( application document not posted)
    the details error shows:
    An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
    during a synchronous update.
    The error was caused by the transaction VA01.
    previously i used same test data that time it was working fine,
    please tell me how can i fix the issue.
    regards
    vasavi

    Key in your Idoc number in BD87, execute
    select the error message and then follow the menu path :
    EDIT --> restrict and process  (Select)
    In the next screen UNCHECK the Bkgd Processing and execute
    Now EDIT --> Process --> foreground from error or in foreground mode.
    This will lead you the screen where it errored out.
    Thx
    PSR

  • Inbound IDOC Mass processing - No status message

    Hi Friends,
    I am updating a database table using inbound IDOC. But in batch job when XI passes multiple IDOCS,
    for some IDOCs there is no status message even though i coded for status message.
    If i rerun IDOC in BD87 then it work fine.
    please help.
    regards,
    madan

    Hi Madan,
    Since you are loading multiple idoc to the system due to high load in the production system data is not commiting properly. So use external commit work statement in you code. this will reduce the performance but logic will work.
    COMMIT WORK [AND WAIT].
    Effect
    The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the current SAP LUW in the process. In this case, COMMIT WORK performs the following actions:
    It executes all subroutines registered using PERFORM ON COMMIT.
    The sequence is based on the order of registration or according to the priority specified using the LEVEL addition. Execution of the following statements is not permitted in a subroutine of this type:
    PERFORM ... ON COMMIT|ROLLBACK
    COMMIT WORK
    ROLLBACK WORK
    The statement CALL FUNCTION ... IN UPDATE TASK can be executed.
    Triggering an internal event for the Persistence Service of the Object Services.
    If event handlers are registered by the Persistence Service, these collect the changes to the objects managed by the Persistence Service and transfer them via CALL FUNCTION ... IN UPDATE TASK to a specific update function module that is registered as the last update module.
    This executes all high-priority (VB1) update function modules in the order of their registration and in a common database LUW. If you do not specify the addition AND WAIT, the program does not wait until the update work process has executed it (asynchronous updating), but instead is resumed immediately after COMMIT WORK. However, if the addition AND WAIT is specified, program processing after COMMIT WORK will not continue until the update work process has executed the high-priority update function modules (synchronous updating).
    When all high-priority update function modules are completed successfully, the statement executes the low-priority (VB2) update function modules in the order of registration together in a common database LUW.
    After the execution of high-priority update function modules, the individual function modules registered using CALL FUNCTION ...IN BACKGROUND TASK|UNIT are executed in a separate database LUW for each destination.
    Within an update function module started using COMMIT WORK, the execution of statements that lead to a database commit is not permitted. In particular, the following are forbidden:
    Thanks,
    Raghav

  • IDOC adapter message limitation Status 64

    Hello,
    we have implemented an IDOC R/3->XI->R3 scenario.
    Sometimes it happens, that the sending system generates a hugh number of idocs.
    In this case, the IDOCs are posted to the receiving R/3 system, but stay on status 64 which says,
    "...to few dialog processes...."
    So the receiving SAP system has to few processes to start the processing of the idocs.
    But we can no enhance the amount of the processes.
    Is it possible, to limit the calls of the IDOC adapter
    or to schedule the idocs, or to make a package?
    This should be done on XI!!!!
    I have read the QUEUE option, but we are working on 4.6BASIS, so this did not solve the problem.
    best regards
    Werner

    Werner-
    This situation can be handled using some variations to your suggestion of handling it in XI.
    1) In the Partner profile of the target R3 system, use the option 'trigger by background program' in the inbound parameters. This way, the IDOCs will be created in the database, syntax checked and will be set to status '64' but with a different message (mostly No filters....). At this point, we are not even trying to post the IDOC to the application, which takes the most processing time.
    2) Then in your traget SAP system, schedule program RBDAPP01. There are various options available to restrict your selections. By scheduling this program to run in regular intervals, you can process IDOCs which are in status 64, there by re-processing them if some failed during the last run because of lack of processes.
    Some additional information on performance improvment:
    RBDAPP01 is an interesting program, because it allows you to parallel process the IDOCs plus process them in packets. That is, instead of processing IDOCs one by one, you can make the program to use all the available free processes to process the IDOCs in parallel. This will greatly reduce your processing time.
    If you see, this program has a tab called 'Parallel Proc' (assuming you are logged on in English). You can activate the check box 'Parallel Proc. Active' and choose a 'Server Group'.
    Now, before using this option, you need to understand that this program will occupy all free DIALOG processes. Which means no process will be available for users to log on (even admins) while the program is busy posting IDOCS. However, this limitation can be overcome by fixing a system parameter on the server group which will limit the number of processes to be used by this program. For e.g., in one of my implementations, we set up the profile parameter in such a way that out of 13 dialog processes available, the program will always leave 5 processes free thereby occupying only seven free processes max.
    This setting was done by the basis team and probably you or your basis team already know about it. If not, let me know, I will try to find it out from our guys here.
    Hope the above explaination help. For more information check note 399271 and other related notes for RBDAPP01 PARALLEL PROCESSING.
    KK

  • Park inbound EDI Invoices on iDoc failure from a workflow?

    Hello all,
    We have seen note 501524 that talks about parking inbound invoices by default.
    Our situation is this. We are expanding our use of EDI for inbound invoices. As such we would like to automate the validations steps as much as possible. To date with our limited use we have set up a workflow to notify on idoc failures and then a few agents have access to BD87 to make the idoc right and reprocess. We don't want to continue this process.
    Our preference would be to continue to allow the iDoc to fail, the workflow fires but at this point we communicate the failure to the appropriate person and park the invoice.
    Does this sound like a reasonable approach?
    Can we even park a red lighted iDoc?
    Once parked can the invoice be dealt with without using BD87?
    Has anyone ever tried this?
    Thanks,
    Doug

    Hi Ralph,
       In my opinion, you must have a PO Number for Invoice if you want to use standard functionality. You will probably need to create IDOC using an ABAP program which reads this file and search for PO based on the information available to you. I also notice that you are missing material number as well, how do you match the item number in the PO ?
       I don't see a way aroung without writing an ABAP program to handle this logic, but you can still use IDOC ( which comes with the standard processing logic and that is a big advantage ) so that you need to write only the PO matching logic.
      or if you are not inclined to write a separate program for uploading file into SAP and formatting IDOC, you can write your own process code (FM)for INVOICE01. Inside this process code (FM), you can put your PO matching logic and then call standard FM (process code). This is what I usually do.
    Cheers,
    Sanjeev
    Cheers,
    Sanjeev

  • Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too

    Intercompany Deliveries were created with zero quantity, causing an idoc failure and the remaining delivery too
    a. User trying to create delivery but stock not available.
    b. When stock is not there it should show an error message in SAP screen but its not -  like stock not available etc
    c. Fedex gets delivery notice for the delivery; if its more than zero it will create delivery otherwise less than zero it won’t accept.
    d. But issue its creating even its less than zero
    Is there anyone who can help me out...

    When one is created with zero quantities it starts blocking our deliveries from getting through to fedex because deliveries will in doubt have been blocked at fedex. As we process our orders in morning and if there is an STO blocking orders, it will be in afternoon .
    Any suggestions !!!

  • Rejection of PO item with reason 06 - IDoc failure

    Hi,
    There is an IDoc failure with message: Rejection of PO item with reason 06.
    The user(supplier) wants to reject first line item of the Subcontracting PO and add a new line item instead with the right data.
    Please suggest.
    Regards,
    Akash Prekar

    Hi Dirk,
    You can actually use the BADI BBP_CREATE_PO_BACK to change the flag value before filling the PO Craetion BAPI interface parameters
    Sangeeta

  • Idocs neding in 64 status and not processed further

    Hi
    We have inbound idocs of FIDCC2 message type, which are set to be triggered immediately. However we have noticed that sometimes (not always) these idocs are in 64 status and are not processed further. We have to manually reprocess them.
    What could be the problem? Where should we start investigating?
    Any help would be appreciated.
    Thanks
    Mick

    I think the comment by Gautham Vangaveti  is probably correct.
    We hit the same issue occassionally.  We have IDOCS as trigger immediately, but at the time they try to process, there are no available work processes which can handle the IDOC and they sit at status 64.
    There is an oss note 1333417 which describes the situation
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1333417
    And unhelpfully suggests changing over to processing by batch job, which is not always appropriate.
    It may be worth enlisting help from you Basis team to try and indentify if those going to status 64 are occuring at the same time each day, and maybe looking to see what other processes are running at that time.  If the load on the system can be managed then the problem may go away, it did for us.
    Otherwise, Basis may be able to increase the number of work process which may also resolve the issue.

  • RBDAPP01 going into SLEEP Mode and Idocs still in 64 status

    Hey all,
          I have a Inbound Idoc interface which is being processed using RBDAPP01 Program. The Issue I am facing is that the job running the rbdapp01 program goes into sleep mode even though there are idocs present in 64 status. I tried to debug the work process using SM66 but it does not open any debugging window although it says debugging started. If I cancel the Job and run it again it processes those Idocs Any input on how one can resolve this issue?
    Thanks.

    Hi Aparna,
    Here is extract from SAP material on running RBDAPP01 transaction and possible reasons for delay in processing. HOpe this can help you.
    To automate the treatment of IDocs, you must run the ABAP program RBDAPP01 (transaction BD20) in job. This program has a very good option for parallel processing which can reduce a lot the time required for treatment. However use it carefully and make sure you set a packetsize high enough to avoid that your SAP system be overwhelm by demands for available dialog tasks (don't forget one dialog task is monopolized per IDocs packed to treat).
    Best Regards,
    Krishna

  • Batch job for IDOC processing in 64 status

    Hi experts ,
    i want to know the name of Batch job for IDOC processing in 64 status.
    I have configured the partner profiles as 'process immediatly'.
    So with this configuration whenever an idoc comes in production it gets processed immediatly and automatically.
    i want to know how they are getting processed automatically.
    is there any job which looks for these idocs(in 64 status and process immediatly flag) and process it.
    What is the trigger for thiese idocs processing???
    Please guide me
    thanks in advance
    Anit gautam

    Hi Thanks for ur reply.
    =====Upon arrival, "process immediately" should fire that process =====
    how it is getting fire?
    means is there any batch job running which looks for idoc in 64 status or is there any event which get triggered when an idoc
    comes in 64 status.
    why we use OYEB transaction???
    Regards

  • Urgent --- How to resend an outbound IDoc which is in status 03

    Hi Experts,
    I've a rquirement to resend an outbound IDoc which is in status 03. I don't want to use BD87  or WE19 to reprocess.
    Please provide me some FM or some technique by which I may use in a Z-program to accomplish the above requirement.
    Even if IDoc no is changed....that won't cause any problem....i just need to resend the IDoc.
    Thnx in advance
    Rudresh
    Mumbai

    Test: Outbound Processing from IDoc
    Use
    This test program selects one or more outbound IDocs and forwards them to the external system. You can choose the IDocs according to various criteria (for example, recipient or business message).
    Prerequisites
    You require outbound IDocs which were generated without errors (no error status). The partner profiles, therefore, must be maintained completely.
    Outbound processing must stop when the outbound IDocs have been generated, to allow the test program to intervene. You can make sure that this is the case by setting the output mode to "Collect IDocs" in the partner profile for the IDoc interface. If you now generate an outbound IDoc for the partner (for example, via the application or the test tool), the IDoc is only generated in the R/3 System and is not forwarded to the external system. This test program, therefore, is simply used to start a selection run which retrieves your IDoc(s) and sends them to the external system. The program is report
    RSEOUT00, which is also generally scheduled with the output mode "Collect IDocs" in live operation. 
    Activities
    Start the test program from the initial node of the IDoc interface by selecting Test ® Outbound from IDoc.
    You can decide whether the output mode is set to "Start subsystem" or "Do not start subsystem" in the partner profile. This defines whether the external (sub) system processes the IDocs further.

  • RSEOUT00 - ECC 6.0 IDOC Dispatch Error.  Status 30 goes to status 02

    After our Unicode conversion to ECC 6.0, we started to get some IDOC processing going from status 30 to 02 and not dispatching to our EDI provider.  We noticed it is on the PO Long Text or any of the Text fields for that matter where somebody has Cut/Paste Text from Word/Excel/Outlook document and they are using colors/fonts/bold, etc.  We've also noticed it on our MAKT table on the description.  You click on the Text and can see it outlines extra characters beyond the end of the visible text.  When RSEOUT00 gets a hold of these PO's, it won't dispatch them.  If we go back and erase the text and type it all in by had and save and close our PO Version change, it dispatches, pulls and loads now to our EDI provider.  Looking for some setting that allows us to maybe turn this feature off?  maybe it has to do with CodePage defaults, etc.  I saw once were you could tell SAP to save documents in Office 2007/2010 version instead of Office 2003 but don't remember which OSS note that was.

    Try to use "Line Editor' or 'Sapscript Editor' instead of  "Continous Text Editor". You will find these editor options below to the text fields in text maintenace tabs. Hope this helps.
    Regards,
    Gokul

Maybe you are looking for