IDOC -FILE ERROR

HI experts,
My scenario is sending IDOC(DEBMAS06) to FILE.
I have configured all the requirements BD54,SM59,WE21,WE20 IN R/3 and SM59,IDX1,IDX2.
WHEN I AM SENDING AN IDOC USING TrCode:BD12, I AM GETTING AN ERROR IN WE02 THAT "EDI: Partner profile inbound not available".
AND IN IDX5 I AM GETTING AN ERROR "No receiver could be determined"
NOTE: IT IS IDOC - FILE SCENARIO
THANKS IN ADVANCE

HI SWARUP,
AFTER DOING ALL THE STEPS U GUIDED, THE RESULT IS AS FOLLOWS IN ID,
Interface Mapping
<Not found>
Runtime error
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_CUSTOMER_MM_:
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>... (109 lines)
THANKS IN ADVANCE

Similar Messages

Runtime error (idoc-file)

Hi experts
iam working on IDOC-file scenarion. after mapping design i have tesed my message mapping (without any data) iam getting error "RuntimeException in Message-Mapping transformation: Unparseable date: ""
then i tetsed the scenario end to end , an outbound IDOC is genarted but in sxmb_moni the status is RED and the error is "RuntimeException in Message-Mapping "
i copied the payload XML message and retested in IR this time the error is :
"Cannot produce target element /ns0:MT_porder. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd"
please suggest me what could be the error
regards
vasavi

hi suddha,
tahnks for your reply.
i checked in RWB>adapterengine->FTP-->
Receiver Adapter v2123 for Party '', Service 'Sys_DMattec':
Configured at 2008-07-28 17:01:23 EDT
History:
- 2008-08-06 10:36:02 EDT: Processing finished successfully
- 2008-08-06 10:36:01 EDT: Processing started
- 2008-08-06 10:29:36 EDT: Processing finished successfully
- 2008-08-06 10:29:35 EDT: Processing started
- 2008-08-05 16:38:04 EDT: Processing finished successfully
but as u said i didnt find anywhere
>>>if successful you get a Status Msg DLVD (Delivered)
please tell me how can i check auditlog?
Iam not sure what kind of ack message you are looking at for FTP protocol. Can be a bit more clear on that?
in sxmb_moni --XML message
status ack.status
processed sucessfully ? (still waiting )
regards
vasavi

Problem adapter idoc - file ATTRIBUTE_INV_SND_SERV

Hello All,
please help me for my problem on adapter in my system XI for a scenario idoc -> file an I have an message error.
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BS_ADONIX</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service BS_ADONIX to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help if you have some idea BS_ADONIx is a business service.
Thanks for your reply

Steps IDOC to File.
IN IR
1. Import the IDOC in XI (input).
2. Create a Data type of (output) i.e. file.
3. Create a Message type of (output) i.e. file used the above data type.i.e.Step 2
4. Create a Message interface of(output) .i.e file used the above messagetype. i.e.Step3.
5. create Mappping select source as IDOC and target as Message type you created.
6, In Interface mapping select source as IDOC and Target Interface Message Interface of file i.e.Step 4.
In ID.
Select the recevier determination of .
1.select sender system as R/3 system recivr as File Bunisees system
2. create interface determination select sender system as R/3 Sender interface as IDOC . in interface determination select inbound message whihc createdin step 4
and message interface we created in step 5.
3. create recevier determination sender r/3 interface IDOC and reciver File business system . so create reciver file adapter and assign to file business system
Please reward points
Thanks
Sreeram.G.Reddy

Production Time Issues on IDOC---File Scenario

Hi All,
We have done all the IDOC--File scenarios Successfully in DEV System.
Now its time to Production and Go-Live.
Q1) Assume If Bulk messages are Failed in RWB-----Receiver CC Due to some error, Then how to Handle these Error messages
Regards
Suman

Hi Mahesh,
This is My Trace File
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: 116866</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPPIS</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 700</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 700</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA07</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
</Trace>
<Trace level="2" type="T">party-scheme: ALE#KU</Trace>
<Trace level="1" type="T">party normalization error: scheme = ALE#KU</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:15:27Z INDIA</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start with given receiver C086 -</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_Soap_Service_Qty MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO0___0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping C5523ABE7D9A35BDABE2082468D67E41</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 1FB1D8C0010B11DD9AB1F535AC101018</Trace>
<Trace level="1" type="T">Interface Mapping http://sub-sapretail-pos.com/Itemmaster IM_POS_Itemmaster_OB</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_ completed. (executeStep() of com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU )</Trace>
<Trace level="1" type="T">ContentType application/xml</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-Subhiksha_PIS_subprd1</Trace>
<Trace level="2" type="T">-BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">http://sub-sapretail-pos.com/Itemmaster.MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Channel found: - BS_Soap_Service_Qty - CC_POS_Itemmaster_OB_Qty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: SOAP</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: SOAP</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://psxprd:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Regards
Suman

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Idoc inbound error - encoding question

Hello,
   I receive idoc file from a parnter.
   I create a File Ports(WE21) : Non-unicode format and Checked 'Continue Despite Conversion Error'.
   The partner send to us a file with ASCII-encoding including German NÄHER .
   In WE02, I found the line with German NÄHER disordered. ÄH became char 腍，but I have set 'Continue Despite Conversion Error'.
   like this:
           PCKAR     SACK NICHT N腍ER SPEZIFIZIERT      0
           PCKNR     000SAC                            8
           ANZAR     00.000        0
           VBELN     301866818                         0
           POSNR     00060                        6
           BTGEW     000.000          0
           NTGEW     .000             1
           TARAG     .000             K
           GEWEI     GM0
           BTVOL     .000             0
   If the parnter don't want to change the encoding, Can I do something to make it worked ?
                                                                                Thanks.

I post the same question on Expert Forums » Application Server » Unicode
It's OK now.
======================
Good way:
Add this code before CALL FUNCTION 'EDI_DATA_INCOMING'
SET LOCALE LANGUAGE 'D'. "table t002
Nils Buerckel's answer :
Hi Harry,
this is not a conversion error.
The file contains Latin-1 data with the special character "Ä".
Now I assume you use as logon language in the Unicode system ZH (or another Asian language) ... ?
Then the system evaluates SY-LANGU and converts the Non-Unicode file based on the Asian code page.
Then ÄH will be interpreted as 腍. Hence the system gets a word with 4 characters instead of 5.
This can lead to shiftings in the whole idoc and the idoc might be invalid.
Therefore I would propose to upload the idoc using logon language EN or change it via "setlocale " in abap code.
Best regards,
Nils Buerckel
SAP AG
Edited by: Harry on Jul 29, 2009 2:38 AM
Edited by: Harry on Jul 29, 2009 2:39 AM

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Logical end of file error

I am getting a "logical end of file error =39" message when trying to export audio to SDII for making a time stamped (BWF) . Any ideas?

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

Issue in IDOC-File Scenario

Hallo Everybody,
In one of the requirements,for the interface design which involves IDOC-FILE scenario we have a req as:-
Multiple IDOCs would be sent from SAP R/3 to SAP XI. Each IDOC can have 0-4 segments and for each segment a file needs to created.
The files needs to be FTPed to a location, only if all the IDOCs have been processed successfully.
Requirement:
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
2) We need to send a notification from XI, in case any IDOC processing fails.
3) How do we check in XI, if all the IDOCs have been processed successfully.
Please suggest me with some good stategies to resolve this issue.
Appreciations and Rewards in line.
Regards,
Younus

Hi
Are you planning to use BPM as it suits your requirement.
To collect the idocs in small bunches refer
Collecting IDocs without using BPM
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
BPM will allow you to wait for the time all IDOC are processed
2) We need to send a notification from XI, in case any IDOC processing fails.
BPM exception handling will allow this functionality even to the exact field you want to send notification
3) How do we check in XI, if all the IDOCs have been processed successfully.
Set Acknowledgment for IDOC's
refer
Posting multiple IDocs with Acknowledgement
Thanks
Gaurav

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

File Error:Unknown File.

I am getting a "File Error:Unknown file" when i try and save my project. So i am not able to save any changes i make to my project. any thoughts?

Try FILE>Save Project As.
does that work?
Shane

"File error: unknown file" upon movie import

Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
BUT...
I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
Any further suggestions???

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

IDOC -FILE ERROR

Similar Messages

Maybe you are looking for