IDOC-File : Service interface is not picking.

I am doing IDOC to File scenario, in Integration Engine level it was picking the different "service interface"
Ex: It was picking MAT_Sender_SI instead DBM_Sender_ SI.
What could be the reason?
Thanks in advance.

Hi Kasi,
I have a doubt in case of IDoc sender u need not create SI for outbound you can use the Idoc name directly.
Hope i haven't understood it wrong.
Hope this helps to configure:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539?overridelayout=true
thanks and regards,
Praveen T

Similar Messages

File Adapter as Sender not picking the files

We configured the File Adapter as Sender, Transport Protocol =NSF and message protocol as FCC.
In OS we have folder to read the file, but SAP XI unable to read the file.
To trouble shoot this issue we copied that file into another location and reverted back to the same location then XI File adaptor is able to read the file.
Now we have compared the Attributes of the path
the only difference in file attributes
Coded character set ID . . . . . . . . :   819
CCSID 819 (decimal)
0333 (hex)
Name ISO 8859-1 ASCII
Description ISO 8859-1: Latin Alphabet Number 1Latin-1 countries and regions
Notes Related CCSID with euro is 923
able to read the file attributes:
Coded character set ID . . . . . . . . :   1252
CCSID 1252 (decimal)
04E4 (hex)
Name MS-WIN LATIN-1
SC Co-existence/Migration
FMS Subset
Registration Date
Description MS Windows, Latin-1
Notes CCSID for this code page with euro is 5348
We have tried to chage the File type as Text and File Encoding with ISO-8859-1even then its not picking the files.
Please suggest me where i am doing wrong here
Thanks,
Venkat.

Hi,
Check the file path & file name , Check the processing mode parameter which you have set?
Check the folder properties & provide all the permission ...
Finally check the communication channel status in RWB, If the problem persist try to stop & start the communication channel again..
Hope it helps...
Regards,
Kumar.

External Service Mangement Service Pricing Procedure not picking up in PO

Hi ,
We have an issue with External Services pricing procedure:
In SPRO->MM->External services Management->Maintain Conditions for Service
Have defined and assigned Schema for Services , but when I make a PO entry the pricing procedure is not picked.
I have maintined condition types , and defined schema procedure for services and there after have assigned service pricing procedure to document type for PO.
I get a message 'Conditions for service price determination incomplete'. And the conditions which are populated are from a different pricing procedure.
Please help me sort the issue.
Thanks

Hi,
This error triggers in case of own pricing procedure or changes to standard pricing procedure. Other reasons could be the price calculation schema is not set up for External Services Management or calculation schema not adopted from client 0 when system configured. Please refer following notes. Thanking you.
SAP Note No. 25357 MM-SRV: Error in the case of service conditions
SAP Note No. 27024 MM-SRV: Setting up components (services)

Service Tax condition not picking during MIRO

Hi,
Referring earlier posted thread,
http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
During MIRO, Service Tax Amount is not Picking... Why???
There is any solution for it.....

Hi,
If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
Why both things need to create...??
No need to maintain
check for your service tax condition type
Cond. class A Discount or
Calculat.type A percentage
Cond.category B Delivery co
and you have accrual tick for your condition in t-code M/06
also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
M/08
Regards
Kailas Ugale

Service PO is not picking the condition type defined for services

Hi Friends,
I am trying to create a PO for services.. but in conditions tab..the system is picking standard PO pricing procedure. It is not picking the service Pricing procedure MS0000. request your help in understanding the issue.
Also the PO is picking the Standard PO release strategy, but not the release startegy define for service..
thank you.
Kireeti

Hi Kireeti,
Your condition schemes for services probably have been modified. Please check
schemes MS0000 and MS0001 in your customizing. For a correct price
determination it is important that for example condition type PRS
is in the first position, further the settings for the flag
'Condition determined manually' should'nt be altered.
Actually the standard schema looks like:
4 0 PRS Total Price                       X 5
5 1 PRS0 General Price Compon             X
5 3 PRS1 Percentage of Wage               X
5 5 PRS2 Overheads                        X
5 7 PRS3 Misc Price Component             X
13 0 KR01 Header Discount                 X
14 0 KZ01 Header Surcharge                X
Could you please change your schema and retest?.
Best Regards,
Arminda Jack

CreditWorthinessQuery_out service interface is not available

Hello All,
We are trying to connect SAP SD with SAP FSCM.
Whenever we are trying to create Sales order, it giving error. Actually at this point system is trying to check customers credit worthiness.
In sap system , sxmb_moni shows message into error as receiver is not found.
This is the namespace and service interface.
"http://sap.com/xi/PI/FIN/Operational/Global" and service interface "CreditWorthinessQuery_out"
In PI7.1 ESR FINBASIS_604 content is imported. I don't see above namspace and service interface in given software component.
Please let me know which software component need to be imported in ESR?.
thanks,
Sharada

Thanks UDO,
We need to integrate SAP SD with SAP FSCM.
As per your suggestion, I have imported following xi contents in ESR,
1.
     FINBASIS 603 as SAP FSCM version is as given
     FINBASIS     603     0004     SAPK-60304INFINBASIS     FINBASIS 603     Component Supp. Pkg.
2.SAP APPL 603 as logistics and Accounting patch level is as
   SAP_APPL     603     0004     SAPKH60304     Logistics and Accounting     APPL Support Package
I have created a business system and have software product SAP ECC6.0 and SAP FSCM6.0.
I cannot use interfaces from above software components as SAP ECC6.0 adds software component SAP APPL6.0 to that business system and SAP FSCM6.0 adds software component to that business system.
Latest version of software product of ECC available in SLD is SAP ECC6.0
Latest version of software product of SAP FSCM available in SLD is SAP FSCM6.0
I want to add software components SAP APPL 603 and FINBASIS 603 to my business system. In this case which software product can be added to technical system?.
Do I have to imprt latest CIM component in SLD?
thanks,
Sharada

Newly created Service Interface does not exist in SOAMANAGER

Hi all,
Here is an interesting dilemma we are having we just put up a PI sandbox and are validating scenarios. We have installed 7.11
We created a new sender agreement and published to the Services Registry. We are able to send the message into the system; but we do not see payload at all in SXMB_MONI which is our first issue and we are wondering if that has something to do with the security set on the web service by default. This is a SOAP call into PI from a .NET application.
When we go into SOAMANAGER to set the security on the service it is not displayed. Is there some additional step we need to do to get the service to show up in SOAMANAGER? Or something we need to do with our new namespace to get SOAMANAGER to search?
We are looking in SOAMANAGER -> Application and Scenario Communication -> Single Service Administration which is where we would expect the the service to exist; but, it does not.
Thanks, Greg

Hi Greg,
If there is a problem with the search not returning the desired result,could you please refer the
SAP Note Number: 1412081 which talks about correction for not getting expected results when Searching
with 'BOTH' in SOAMANAGER for Service Groups.
Yes you are right it does not have to be a proxy all the time,Please refer the blog which explains about service definition
in abap
/people/shibaji.chandra3/blog/2010/02/17/soa-web-service-expose-and-consume-configuration-with-soamanager
/people/bv.pillai/blog/2008/01/27/new-service-definitions-in-the-abap-development-environment-soamanager-150-sap-nw-70-sp14
Regards,
Srinivas

File to Idoc - File not picked up

Hi experts,
In the file to idoc scenario when i post a file in the file server it is not picked up by the file adapter. But in the communication channel monotoring it reports <b>'Process finished sucessfully'</b>.
Help me out in this issue.
Regards
Santhosh Kumar V

HI Santhosh
if you are using NW latest version.check in Communication channel monitoring
otherwise in Adapter monitoring.
Check u r Sender Communication channel working or not... in RWB->Component monitoring->Communication channel monitoring..
in which color it is displaying u r Sender Communication channel?? If it is in RED color then u r sender cc is error one.
Check the following:
1. Name of the input file and the filename in communication channel should match.
2. The communcation channel is activated
3. The folder path is correct.
4. The Processing mode is "Delete"
5. XI server is up when u try the scenario
6. The adapter has status green in RWB Adapter Monitoring
7. Sender Agreement is properly configured
As explained above
See ,,
--Check the FTP server details
--Check the User.pwd and authorisations -- to read file,
--Check the File name sapecified in sender CC, and check the file i spicked by CC or not in RWB channelmonitorservlet
by http://host:port/mdt/channelmonitorservlet
--Also see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
/people/sravya.talanki2/blog/2005/08/23/sender-xi-ftp-adapter-with-regular-path-expression-150-abap - Sender XI FTP Adapter with Regular Path Expression ABAP
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

Receiving Open Interface not picking Inter-Org records from Interface

Hi,
I am trying to receive the inter org transfer through the Receiving Open interface, but the interface not picking the data from the interface tables (RCV_HEADERS_INTERFACE, RCV_TRANSACTION_INTERFACE).
I am in 11.5.10.2, all the sources worked fine like Vendor, Internal Order, Customer but the issue is with the Inventory source (inter orgs)
Please could you advise what could be the reason for the interface for not picking the Inventory source data from the interface table.
Below are the interface insert script that am using..
INSERT INTO RCV_HEADERS_INTERFACE
(HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPMENT_NUM,
RECEIPT_HEADER_ID,
SHIP_TO_ORGANIZATION_ID,
EXPECTED_RECEIPT_DATE,
EMPLOYEE_ID,
VALIDATION_FLAG
VALUES
(rcv_headers_interface_s.nextval , --Header_Interface_Id
rcv_interface_groups_s.nextval, --Group_Id
'PENDING', --Processing_Status_Code
'INVENTORY', --Receipt_Source_Code
'RECEIVE', --Transaction_Type
'DELIVER', --Auto_Transact_Code
SYSDATE, --Last_Update_Date
-1, --Last_Updated_By
-1, --Last_Update_Login
SYSDATE, --Creation_Date
-1, --Created_By
'ICR-001', --SHIPMENT_NUM
21073573, --RECEIPT_HEADER_ID
2266, -- SHIP_TO_ORGANIZATION_ID
SYSDATE+1, --Expected_Receipt_Date
5543, --Employee_Id,
'Y' --Validation_Flag
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
CATEGORY_ID,
QUANTITY,
UNIT_OF_MEASURE,
ITEM_ID,
AUTO_TRANSACT_CODE,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
SHIP_TO_LOCATION_ID,
RECEIPT_SOURCE_CODE,
TO_ORGANIZATION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
SUBINVENTORY,
LOCATOR_ID,
HEADER_INTERFACE_ID,
VALIDATION_FLAG,
SHIPPED_DATE
--SELECT
VALUES
rcv_transactions_interface_s.nextval, --Interface_Transaction_id
rcv_interface_groups_s.currval, --Group_id
SYSDATE, --Last_update_date
-1, --Last_updated_by
SYSDATE, --Creation_date
-1, --Created_by
-1, --Last_update_login
'RECEIVE', --TRANSACTION_TYPE_RECEIVE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
203, -- CATEGORY_ID
20, --QUANTITY
'EACH', --UNIT_OF_MEASURE
4379131, --ITEM_ID
'DELIVER', --AUTO_TRANSACT_CODE
21073573, --SHIPMENT_HEADER_ID
16566939, --SHIPMENT_LINE_ID
101629781, --SHIP_TO_LOCATION_ID
'INVENTORY', --RECEIPT_SOURCE_CODE
2266, --TO_ORGANIZATION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
13706, --DELIVER_TO_PERSON_ID
101629781, --LOCATION_ID
101629781, --DELIVER_TO_LOCATION_ID
'FG', --SUBINVENTORY
46259, --LOCATOR_ID
rcv_headers_interface_s.currval, --Header_interface_id
'Y', --VALIDATION_FLAG
SYSDATE
Thank you,
Genoo
Edited by: Geno on May 25, 2013 4:54 AM

Any suggestion/advise please!
Thanks,
Genoo

Service interface not listed in business system in ID.

Hi Experts,
In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Please suggest how to resolve this issue.

Hi Venu,
i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
Regards,
Mark

SPROXY not recognizing new Service Interfaces

Hi all,
We are currently on SAP_BASIS 7.0 connecting to XI 3.0 on SP18. I have created a new inbound asynchronous message interface within XI and want to create a server proxy on the SAP side to consume the message from XI. When I execute the SPROXY transaction to import the XI message interface, it is not displayed under the service interface and not allowing me to generate this. Existing proxies exist under other service interfaces created since the upgrade but it doesn't seem to recognize that I created a new message interface in XI. Would this be a compatibility issue with SAP_BASIS 7.0/ECC6 to XI 3.0 SP18 or would do I need to refresh something? Any help would be appreciated.
Thanks,
Nate
Edited by: Nathan Jabs on Sep 17, 2008 6:43 PM
Edited by: Nathan Jabs on Sep 17, 2008 6:44 PM

1.Recreate the name space with other name else than sap.com
2. check whether ur namespace is displayed in light Grey Color
then there may be connection to SAP XI issue.
yes if it is in Light gray colour, you will get a status message as "NO CONNECTION TO INTEGRATION BUILDER (ONLY GENERIC DATA VISIBLE)
check whether the proxy objects are created under seperate package
check this help link
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Mid-process Receive (onEvent) is not picking up published event

We have a composite (CompositeA), which has 2 BPEL processes (bpelprocess1 and bpelprocess2). bpelprocess1 is synchronous and bpelprocess2 is a one-way. bpelprocess1 receives a message from the client - then sends the message using a one-way Invoke action to bpelprocess2 - bpelprocess2 transforms the message and assigns some values - then sends the message to Event1 through an Invoke action - bpelprocess1 has a Receive activity waiting for an event from Event1 - then it will send the message back to the client as the Reply. Everything works up to the point where the bpelprocess1 Receive(onEvent) activity is waiting for an event, it sits in this "Pending" state until the SyncMaxWaitTime value has expired and then we get a timeout error (see below).
"Waiting for response has timed out. The conversation id is null. Please check the process instance for detail."
So our question is, why does the Receive(onEvent) in bpelprocess1 never pick up the published event? We've run some additional tests to ensure the event is being published, and that has been confirmed.
Is it possible to receive an event that was published during the current instance of the process (i.e., since bpelprocess1 invoked bpelprocess2 which invoked the Event1 publish, can bpelprocess1 perform a mid-process Receive of the event that was just published?
Please let us know if this makes sense or if you have any additional questions.
On a side note, if we create an independent mediator component in the same composite and have it subscribe to Event1 as well, then just write the message out to a file. It would not pick up the message from the EDN in the scenario described above, if we set the property nonBlockingInvoke=true or bpel.config.transaction=requiresNew on the bpelprocess2 partnerlink from bpelprocess1, the Mediator would get the message from the EDN, but bpelprocess1 still timed out waiting for the event. If we setup another BPEL process (bpelprocess3) in the same composite (though not linked to bpelprocess1 and bpelprocess2) and it has a mid-process receive onEvent listening for Event1, it does not pick up the published event either, so seems to be an issue with the mid-process receive onEvent in the synchronous BPEL process.
Any help is appreciated.

Thanks for the reply, but there is no issue with the one-way from bpel1 to bpel2, we do not expect nor want a response from bpel2, it should just publish the event and complete. The bpel1 should continue it's flow (which it does) and the next action is a Receive action listening for an event (that was published by bpel2), but the Receive never finds the event.
Here's a less complex use case:
1. bpelprocess1 is a synchronous process which publishes to Event1 (this completes successful and returns a success message to the client)
2. bpelprocess2 is an asynchronous process which has a mid-process Receive action that is listening for Event1
3. bpelprocess3 is a process which is initiated by Event 1
If we execute bpelprocess2 it will set at the mid-process Receive action in a PENDING state, waiting for Event1 to occur.
If we then execute bpelprocess1 the Event1 is published and we receive a "SUCCESS" response back.
At this point bpelprocess3 is initiated (b/c it's initial Receive is triggered by Event1)
We would also expect the mid-process Receive in bpelprocess2, which is in a PENDING state to trigger, but it never does.
Hopefully this use case makes more sense.

How to create Endpoints for Inbound Service Interfaces in PI?

Hi Gurus,
we have to publish Endpoint URLs for third party system, which have to send us SOAP Messages via HTTP. For this we need to publish Endpoints (Incoming into PI) for the third Party Systems.
I already tried to publish it out of the Sender Agreement, but this is only for Outbound Service Interfaces and not incoming. I Also tried to publish the WSDL out of the Service Interface Design, but there are no Endpoints supplied.
What can i do, to get incoming endpoints?

>
Udo Buchter wrote:
> Hi Gurus,
>
> we have to publish Endpoint URLs for third party system, which have to send us SOAP Messages via HTTP. For this we need to publish Endpoints (Incoming into PI) for the third Party Systems.
>
> I already tried to publish it out of the Sender Agreement, but this is only for Outbound Service Interfaces and not incoming. I Also tried to publish the WSDL out of the Service Interface Design, but there are no Endpoints supplied.
>
> What can i do, to get incoming endpoints?
Once you generate the WSDL in that there will be an SOAP Action url where you can see the endpoint or the target to which message will be sent to...
only thing you need to provide them apart from WSDL is user credentials.. thats it..
they need to import the WSDL provided by PI in their application
Rajesh

WAN users experience extremely slow file services...and nothing else!

Help! I have been having issues lately with network throughput on any file that is accessed from an off-site location. Currently I have a Leopard server (running DNS, Firewall, NAT, VPN, iChat) that is providing authentication services to my users who are logging in from an off-site location. I also have a second server running Tiger server that is set up as an OD Master running AFP and providing authorization services to my users. This is where most of the files my users are accessing are located.
I have run speed test after speed test on our internet connection that consistently yields a rock steady 337KB/sec UL and 319KB/Sec DL (We have bonded T1's @ ~3.072 Mbps) yet when users are trying to download or access files using AFP or FTP the server will sputter between 0-120KB/Sec and never achieve anywhere close to its maximum theoretical throughout. I have tried to confirm in as many ways as possible that this is a file service problem and not an internet connection issue. I regularly use Remote Desktop from my home to connect to the server that yields bursts and sustained speeds all the way up to 340KB/Sec. Again, bursts are not saying much, however when the server was displaying a screen saver in full color mode, the throughput was steady at ~3.072 Mbps. Furthering my suspicion that this is a service issue, I have set up a VPN that sends all traffic over the VPN and then logged in and visited Youtube and other download sites, all yielding the expected maximum 3.072 Mbps speeds when downloading files from the internet to my computer.
In order to try and narrow down the problem further, I have turned off the VPN service (thinking that perhaps the overhead for encryption for multiple users was causing the low throughput) and tried both secure and insecure AFP and FTP downloads from the server. Again, this yielded the same pathetic throughput.
Is there some issue with transferring files over the internet that I'm not aware of? I'm literally tearing my hair out trying to figure out where the problem is. Users are taking anywhere from 2-5 minutes to open small (<1M files and this is causing serious headaches. Alternatively, are there any other solutions that would enable users at multiple locations to access the same files at the same time?
Thanks for any help you guys can provide, I'll be more then happy to answer any questions you have.

Hi,
Try both repair disk permission (under disk utility) and repair disk from your installation disk A. If the problem persists, try manually downloading COMBO update 10.6.5 and install it. The combo update may overwrite those problematic softcode and thus overcome the problem.
Hope these help.
Cheers.

IDOC-File : Service interface is not picking.

Similar Messages

Maybe you are looking for