IDOC File target - file not getting created

I am using Realtime job for sending idoc from data services to sap. I am using idoc message as source, query and idoc file as target transform in the data flow. I have following settings in IDOC file as target
Idoc file : /tmp/costcentertest.txt
Idoc type: COSMAS01
Data store name: DS_SAP
Application server: saptest
When i send the idoc I can load the data into table or create the file in /tmp directory. After changing target to idoc file and entering the above settings i don't see any file getting created. I do see idoc was received from we05 and also show green in data management console.
I was checking if i have to change something or missing some steps.

Hi Satheesh
Check whether the order qty field is there in flat file or not. Second if the data is there then it is getting uploaded
in read the file or not. Subsequently in converted data . When the mapping is correct and data is getting populated
in read file and converted file it will get uploaded. Hope it will help you.
Thanks
Sushant

Similar Messages

File not getting created in Target Directory..........

Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri

>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors?

File not getting created at the Reciever

Hi All,
I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
I have refreshed the Cache in Integration directory. it is still not working.
I tried using a different Communication channel with the Mail adapter that is working fine.
I cant figure out what the problem is please help.
Many Thanks,
Neha

Hi! Neha,
Here i want to add some points :
Even I faced same problem in project....... then I followed this procedure...
My scenario is FILE TO RFC via FTP Server in file adapter.
Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
Most of the times I checked and I did successfully.
Main issue are due to:::
1. Check Queues in Inbound queue SMq2
2. Trace teh step by step in message flow in message monitoring that means check whether message flows
from a) Intergration Engine
b) Adapter Engine..
3. Check and trace the flow in Message monitoring in Run Time work Bench
4. Check Status of Receiver communication Channel in Communication channel Monitoring
5) Check whether Business Services are Scheduled in Availability Time planning or not
6 Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
Note:: All above needs to check only if development part is correctly configured.
Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
Thanks
Amar Srinivas Eli
Reward Points if useful

File not getting created in a different server

My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
Vish

Try to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
    RFC_DESTINATION            =
*   FILE_MASK                  = ' '
*   LOCAL_DIRECTORY            = ' '
*   REMOTE_DIRECTORY           = ' '
*   OVERWRITE_MODE             = ' '
*   TEXT_MODE                  = ' '
*   TRANSMISSION_MONITOR       = 'X'
*   RECORDS_PER_TRANSFER       = 10
*   MONITOR_TITLE              =
*   MONITOR_TEXT1              =
*   MONITOR_TEXT2              =
*   PROGRESS_TEXT              =
* IMPORTING
*   LOCAL_DIRECTORY            =
*   REMOTE_DIRECTORY           =
*   LOCAL_SYSTEM_INFO          =
*   REMOTE_SYSTEM_INFO         =
* TABLES
*   FILE_LIST                  =
* EXCEPTIONS
*   CONNECTION_FAILED          = 1
*   INVALID_VERSION            = 2
*   INVALID_ARGUMENTS          = 3
*   GET_DIR_LIST_FAILED        = 4
*   FILE_TRANSFER_FAILED       = 5
*   STOPPED_BY_USER            = 6
*   OTHERS                     = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.

Java file is not getting created in gen_sqlj

Hi All
I have cretaed a EJB dc.
when I creating a .sqlj file, its corresponding .java fiel is not getting created in gen_sqlj folder.
what will be the reason for this?
how to create that?

I've got the same problem. Is there a solution for that?

Silent Installation - Respond file not getting created !!!

Hi,
I am trying to create a respond file by running the installation as follows
./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
Please help.
Thanks,
Ankit.

Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).

Infotype 1000, Position data IDOC is not getting created via RBDMIDOC

Hi All,
We are using PFAL styandard HRMD_A message type, while executing RBDMIDOC with message type HRMD_A, all the infotypes data IDOC is created except Infotype 1000 Position(S).
The same is (Infotype 1000, position IDOC is created in dev server) but the same is not getting created in Quality and Prod.
Can any one suggest the same, what could be the error.
Thanks.

Hi,
You need to check in your filter settings in BD64 for your corresponding distribution model, if you have included IT1000 for PD objects such as O, C, S. After adding this filter group, you have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, you have to generate partner profiles (environment> generate partner profiles).
Hope it helps,
Christine

Production version is not getting created using ALE-IDOC

Hi all,
Am using BD10 to transfer the material from sending to receving system.All the views are geting sent successfuly accept the production version tab data of MRP4 view.The segment is available in the standard IDOC.But prodction TAB is not getting created at receving system .Please help to resolve this issue.
Thank you.

Hi Sanu,
BD10 Send Material..
the reason might be Production tab is not created is the segment is not a mandatory..
and the data is not populating for that fields.
if the segment is not madatorty and data is not available for the fields in the segment ..the prodction TAB will not be created ..
Regards,
Prabhudas

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Attachment not getting created in PI from CRM

Hi Everyone,
I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
          CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                          EXPORTING
                     input_length = lv_input_length
                     first_line   = lv_first_line
                     last_line    = lv_last_line
                   IMPORTING
                     buffer       = lv_xbuffer
                   TABLES
                     binary_tab   = file_content_binary.
   2. Then I am getting the server context and the protocol.
                       obj_server_context = cl_proxy_access=>get_server_context( ).
                       obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
* Assign File naame to STRING Variable
                       lv_name = lv_filename.
* Attach file to the service response.
                       obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                  data = lv_xbuffer
                                  type = if_ai_attachment=>c_mimetype_pdf
                                  name = lv_name ).
                       APPEND obj_attachment TO t_prx_attach.
                       obj_attch_protocol->set_attachments( t_prx_attach ).
   3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
     With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

Hi Gurus,
Can you please help with some pointers on this.
I have used below links as reference for coding.
Link 1 :
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
Link 2:
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
Thanks in Advance,
Manil.

Required attribute not getting created

Ok, here is a wierd one.
I have some custom ID management code (an SSO plug-in cert mapper and a WAR file I deploy to OC4J_SECURITY). The application provides a registration process that creates user entries and RADs for Oracle Forms app users. Everything works fine, except that I have found that my RAD creation does not get the orclresourceviewers attribute created automatically.
This has worked in my IM development farm. The attribute would be created automatically. It was difficult to figure out this was the reason my Forms App Server would fail with the following exception.
oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
I have gone through the motions of now preparing to query the OID Forms ID so that I can fill in this attribute in my RAD creation class. I still would like to know why this attribute is not getting created for me anymore.
Any ideas?
Oh and BTW, it did not help that orclresourceviewers is not documented anywhere I could find (not OID Admin and not Forms Deployment Guide)
regards,
tt

Hi Sandeep.
Yes, my application entities that I set up to manage a specific realm are used to create all RADs in a particular realm. As part of the setup for this I add these application entitites to the following three realms:
cn=OracleDASAdminGroup,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=RealmAdministrators,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
cn=UserProxyPrivilege,cn=Groups,cn=OracleContext,dc=<realm_name>,dc=<abc>,dc=<com>
I add to these so that the app entity could create, modify, delete and proxy to any realm user. I had to create an ACI to allow my entities to search and see the Forms Server application entity entry in order to populate orclresourceviewers.
I just wish I new why orclresourceviewers does not get created automatically. Of course, if I create the RAD in DAS or using the Oracle DynamicResourceCreate option, it is added. It has added it in my own RAD creation code at one point and it stopped for some reason.
I had to add an LDAP search to my RAD creation code with the possibility of multiple Forms Server entries (Logical Application Group) just in case. Much ado for something that maybe should not have been necessary.
regards,
tt

Sub node is not getting created

Hi Experts
I have IDOC to SOAP scenario, here the subnode is not getting created in the main node. please help me
Structure is given below
Source
Matmas
      IDOC
          e1m -
(1...9999 ) occurance
Target
Target
XMLDATA --- (1.. UNBOUNDED)
     SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.) -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Quesion 1.
now i want XMLDATA node to be repeated as many times as e1m comes from source along with both the subnodes 2 and 3 at target side.
but i could see only subnode2 is getting created not the subnode3 while testing.
May i know why is this happening.
I want the SUBNODE3 also be created.
Note the occurance of SUBNODE3 is 0.. unbounded
Question 2:
I want the SUBNODE3 also to be repeated as many times as e1m node comes from source.
For example:
e1m comes twice then the target should be as below
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.) -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.) -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Regards
Lara

Please see the below logic:
E1MARAM --> XMLNODE
E1MARAM --> useOneAsMany_customUDF -->SUBNODE3
E1MARAM/MATNR --> useOneAsMany_customUDF --> SUBNODE3/MATNR
E1MARAM/xyzfield --> useOneAsMany_customUDF --> SUBNODE3/xyzfield
Source:
<?xml version="1.0" encoding="UTF-8"?>
<MATMAS05>
   <IDOC>
      <E1MARAM>
         <MATNR>123</MATNR>
      </E1MARAM>
      <E1MARAM>
         <MATNR>1234</MATNR>
      </E1MARAM>
   </IDOC>
</MATMAS05>
Target
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Test xmlns:ns0="urn:test-2:test:area">
   <XMLDATA>
      <SUBNODE1>
         <SUBNODE2/>
         <SUBNODE3>
            <MATNR>123</MATNR>
         </SUBNODE3>
         <SUBNODE3>
            <MATNR>1234</MATNR>
         </SUBNODE3>
      </SUBNODE1>
   </XMLDATA>
   <XMLDATA>
      <SUBNODE1>
         <SUBNODE2/>
         <SUBNODE3>
            <MATNR>123</MATNR>
         </SUBNODE3>
         <SUBNODE3>
            <MATNR>1234</MATNR>
         </SUBNODE3>
      </SUBNODE1>
   </XMLDATA>
</ns0:MT_Test>
useOneAsMany_customUDF
for(int i =0;i<var1.length;i++)
   for(int j=0;j<var1.length;j++)
      result.addValue(var1[j]);
    result.addContextChange();
Hope it helps!

War not getting created jdeveoper 10 g latest release

hi,
I had created a new deployment profile for my application names testwar , but the war is not getting created in the folder deploy nor there is any folder named deploy in my application workspace directory.
Can anyone help me or give me a link which will help me create a war file , is it necessary to select the platform also on the option provided while make the

Hi,
create the deployment profile and use the context menu to create the war file. That is how it works.
Frank

Outbound Delivery Not getting created

Hi Gurus,
Outbound Delivery Not getting created
there is a DESADV IDOC that is supposed to create inbound dely, do the GR then create Outbound delivery and shipment (all automized). But this is not happening.
There is workflow set up that is blocking this...Task no TS95000019 is responsible for passing the values. This will show up in the SAP inbox with error description. But i am able to see TS95000018 but TS95000019 is not showing up in the workflow log.
Can anyone let me know what setting is missing in workflow so that this task shows up and i can make the system create outboud delivery and shipment automatically
Please help
Sunil

Sunil
First check whether that particular task is active in your client.
For a task to get triggerred you need to activate the triggerring settings.
Use PFTC T-code, input your task as TS and ID as 95000019
click on view button
Then click on " Triggerring Events" tab page.
View whether your task 95000019 is active. Green light will appear next to it in the left most column. If it is grey or red, then you need to change it to green. Only then it will work. Once this gets triggerred, subsequently it will pass the message to your inbox with correct error message and then only create an outbound delivery.
Hope this will help you out !
Regards,
Syed Nasir

Excise invoice should not get created without PGI

Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T Saravanan

Dear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi

Invoice is not getting created in Order related billing

Dear all,
I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
Please suggest me if there are any configuration changes i need to do to overcome this problem.

Apart from the suggestion already given, also ensure that
the order is not showing in incomplete log
the order is not blocked for credit limit
You can also cross check in VF04 whether system is fetching that sale order. For information, once you execute VF04, by default, system will check only "Delivery related" check box. You have to manually select "Order related" check box.
G. Lakshmipathi

IDOC File target - file not getting created

Similar Messages

Maybe you are looking for