IDOC -- File

Hi,
In my scenario, i am creating file from the Source IDOC Data, In the message monitoring it is showing that the file had got created and the file is getting created in the directory also, but the data is not getting created in the file. Can anyone let me know where can the possible mistake lies..
It shows that everything is correct in SXMB_MONI and message monitoring.
Regards,
Kittu.

Hi Jai,
Actually iam splitting the data which iam getting from the idoc into 3 different messages using the Multi-Mapping with the enhanced Interface Determination, so do i need to use some different sort of Content conversion to handle this.Everything in the monitoring shows that the file had been created with these many bytes of data but my text file doesnt hold any data.
Please advice.
Regards,
Kittu.

Similar Messages

  • Issue in IDOC-File Scenario

    Hallo Everybody,
    In one of the requirements,for the interface design which involves IDOC-FILE scenario we have a req as:-
    Multiple IDOCs would be sent from SAP R/3 to SAP XI. Each IDOC can have 0-4 segments and for each segment a file needs to created.
    The files needs to be FTPed to a location, only if all the IDOCs have been processed successfully.
    Requirement:
    1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
    2) We need to send a notification from XI, in case any IDOC processing fails.
    3) How do we check in XI, if all the IDOCs have been processed successfully.
    Please suggest me with some good stategies to resolve this issue.
    Appreciations and Rewards in line.
    Regards,
    Younus

    Hi
    Are you planning to use BPM as it suits your requirement.
    To collect the idocs in small bunches refer
    Collecting IDocs without using BPM
    1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
    BPM will allow you to wait for the time all IDOC are processed
    2) We need to send a notification from XI, in case any IDOC processing fails.
    BPM exception handling will allow this functionality even to the exact field you want to send  notification
    3) How do we check in XI, if all the IDOCs have been processed successfully.
    Set Acknowledgment for IDOC's
    refer
    Posting multiple IDocs with Acknowledgement
    Thanks
    Gaurav

  • XML IDoc file to IDOC .

    Hi,
    I am receiving XML idoc (Orders05) file from 3rd party to PI system , PI needs to create sales order IDoc ( Orders05) in ECC system. 
    1) Do I need to create source structure for XML IDoc file ? If yes should I create the structure as Orders05 ?
    2) How to map line items of xml file to Orders05 IDoc line items ?
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Please see Mikes reply in this thread. You may follow the same procedure:
    XML to FlatFile IDOC
    Regards,
    ---Satish

  • Append or combine multiple IDOCs into a single IDOC file

    Hi All,
    We are implementing multiple new payment types that will generate IDOC files for us to send to the bank.  To keep the cost to the minimum, the requirement is to combine multiple IDOCs to a single file.
    I'd like to know the most efficient way to complete this task.  Also, I am new to this forum, please let me know if I need to include additional information.
    Your help will be deeply appreciated.
    Thank you,
    Joanne T.

    Hi Milind,
    One way you can do this is generate each report in PDF or Postscript, and then use Adobe Acrobat Distiller to combine the files into one PDF document.
    Regards,
    Stewart

  • NO MATERIALs in the Sales order created through inbound idoc file

    hi,
    i have maintained the customer material number as well the SAP Material number in the tcode VD51,but still the inbound
    idoc type ORDERS03 is posting the application document(Sales order) without the materials.
    for instance,
    I have cust.material as CUSTMAT1 in the idoc file.
    I have maintained the CUSTMAT1 as cust material and 1001 as material no in VD51.
    After posting the inbound idoc file using RSEINB00 prg,the idoc is created and i can see the CUSTMAT1 in the material segment field
    The Sales order is created successfully ,but without the materials.
    i need the application document has to be posted with materialsm,can any one help me to solve this issue.?
    Thanks

    Hi ganesh ram
    In order to determine the Material Number with you custom material then you needs to have some configurations.
    Check with your Functional consultant to add the Access sequence for determining the Material Number with you custom material
    In Sale order processes...
    Thanks
    Ramesh

  • HR-PDC interface: Problems in the file name of the downloaded idoc file

    I'm currently busy with the HR-PDC interface to EBI-time recording system. The RFC destination to EBI's quality system is working fine but we are experiencing differences in the idoc file name that we are creating in the EBI path. When we send a request to EBI to upload clocks, an idoc (Message Type: HRCC1REQUPTEVEN and IDOC type: HRCC1REQUPTEVEN01 ) is sent to EBI The file name is HRCC1REQUPTEVEN whereas in a previous implementation file name is HRCC1REQUPTEVEN01. The control record information on the outbound idoc are the similiar in terms message types and idoc types sent through to EBI. Have you ever come across this issue in your previous experiences with SASOL's HR-PDC interface. SAP has not changed the IDOC type HRCC1REQUPTEVEN01 since 1998.

    can you please also contact IDM support about it?
    * http://www.internetdownloadmanager.com/register/new_faq/main.cgi

  • IDoc- File scenario: can you explain thses acknowledgments?

    Hi,
    I have an idoc->file scenario. in sxmb_moni I can see a green "OK" mark for my message in acknowldgment status column. when I dblclick the message, I can see my original message and 2 acknowldgment messages under this one in the top left.
    1 acknowledgement is the OK one, the 2nd one is of type AckNotSupported.
    When I dlbclick the OK one ack and click the idocoutbound, I can see:
      <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
      <SAP:MANDT>450</SAP:MANDT>
      <SAP:DOCREL>700</SAP:DOCREL>
      <SAP:DOCNUM>0000000000257842</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>ALEAUD</SAP:MESTYP>
    and when I dblclick the 2nd ack and IdocOutbound, I see:
      <SAP:MANDT>450</SAP:MANDT>
      <SAP:DOCREL>700</SAP:DOCREL>
      <SAP:DOCNUM>0000000000257862</SAP:DOCNUM>
      <SAP:DIRECT>2</SAP:DIRECT>
      <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
      <SAP:CIMTYP />
      <SAP:MESTYP>ALEAUD</SAP:MESTYP>
      <SAP:MESCOD />
    450 is the client of my IE, not the sender SAP system.
    What should all this mean? What does each ack mean and why do I get 2 of them?
    When I check the Idoc no. in XI, there is no such IDoc. Where are these Idocs sent from?
    POINTS WILL BE ASSIGN FOR SURE FOR CORRECT ANSWER.
    Thanks, Olian

    green:
    hoplist
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Response -->
    <SAP:HopList SOAP:mustUnderstand="1" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
       <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
          <SAP:Engine type="IS"/>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">IDOC</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info>ARTMAS.0000000000026370:20080610211506</SAP:Info>
       </SAP:Hop>
       <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
          <SAP:Engine type="IS">is.12.shlxiqcis1</SAP:Engine>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info>3.0</SAP:Info>
       </SAP:Hop>
       <SAP:Hop timeStamp="2008-06-10T21:15:13Z" wasRead="true">
          <SAP:Engine type="AE">af.xiq.shlr3qdbs3</SAP:Engine>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info/>
       </SAP:Hop>
    </SAP:HopList>
    content
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Response -->
    <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
       <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
       <SAP:MANDT>350</SAP:MANDT>
       <SAP:DOCREL>700</SAP:DOCREL>
       <SAP:DOCNUM>0000000000258080</SAP:DOCNUM>
       <SAP:DIRECT>2</SAP:DIRECT>
       <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
       <SAP:CIMTYP/>
       <SAP:MESTYP>ALEAUD</SAP:MESTYP>
       <SAP:MESCOD/>
       <SAP:MESFCT/>
       <SAP:SNDPOR>SAPXIQ</SAP:SNDPOR>
       <SAP:SNDPRN>SHLSYSQAS</SAP:SNDPRN>
       <SAP:SNDPRT>LS</SAP:SNDPRT>
       <SAP:SNDPFC/>
       <SAP:RCVPOR>SAPR3Q</SAP:RCVPOR>
       <SAP:RCVPRN>R3QCLNT330</SAP:RCVPRN>
       <SAP:RCVPRT>LS</SAP:RCVPRT>
       <SAP:RCVPFC/>
       <SAP:TEST/>
       <SAP:SERIAL/>
       <SAP:EXPRSS/>
       <SAP:STD/>
       <SAP:STDVRS/>
       <SAP:STATUS>03</SAP:STATUS>
       <SAP:OUTMOD/>
       <SAP:SNDSAD/>
       <SAP:SNDLAD/>
       <SAP:RCVSAD/>
       <SAP:RCVLAD/>
       <SAP:STDMES/>
       <SAP:REFINT/>
       <SAP:REFGRP/>
       <SAP:REFMES/>
       <SAP:CREDAT>0000-00-00</SAP:CREDAT>
       <SAP:CRETIM>00:00:00</SAP:CRETIM>
       <SAP:ARCKEY/>
    </SAP:IDocOutbound>
    Red one:
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Response -->
    <SAP:HopList SOAP:mustUnderstand="1" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
       <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
          <SAP:Engine type="IS"/>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">IDOC</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info>ARTMAS.0000000000026370:20080610211506</SAP:Info>
       </SAP:Hop>
       <SAP:Hop timeStamp="2008-06-10T21:15:07Z" wasRead="true">
          <SAP:Engine type="IS">is.12.shlxiqcis1</SAP:Engine>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info>3.0</SAP:Info>
       </SAP:Hop>
       <SAP:Hop timeStamp="2008-06-10T21:15:13Z" wasRead="true">
          <SAP:Engine type="AE">af.xiq.shlr3qdbs3</SAP:Engine>
          <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
          <SAP:MessageId>48499DB8-21B6-0329-E100-00000A320B33</SAP:MessageId>
          <SAP:Info/>
       </SAP:Hop>
    </SAP:HopList>
    content
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- Response -->
    <SAP:IDocOutbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
       <SAP:TABNAM>EDI_DC40</SAP:TABNAM>
       <SAP:MANDT>350</SAP:MANDT>
       <SAP:DOCREL>700</SAP:DOCREL>
       <SAP:DOCNUM>0000000000258083</SAP:DOCNUM>
       <SAP:DIRECT>2</SAP:DIRECT>
       <SAP:IDOCTYP>ALEAUD01</SAP:IDOCTYP>
       <SAP:CIMTYP/>
       <SAP:MESTYP>ALEAUD</SAP:MESTYP>
       <SAP:MESCOD/>
       <SAP:MESFCT/>
       <SAP:SNDPOR>SAPXIQ</SAP:SNDPOR>
       <SAP:SNDPRN>SHLSYSQAS</SAP:SNDPRN>
       <SAP:SNDPRT>LS</SAP:SNDPRT>
       <SAP:SNDPFC/>
       <SAP:RCVPOR>SAPR3Q</SAP:RCVPOR>
       <SAP:RCVPRN>R3QCLNT330</SAP:RCVPRN>
       <SAP:RCVPRT>LS</SAP:RCVPRT>
       <SAP:RCVPFC/>
       <SAP:TEST/>
       <SAP:SERIAL/>
       <SAP:EXPRSS/>
       <SAP:STD/>
       <SAP:STDVRS/>
       <SAP:STATUS>03</SAP:STATUS>
       <SAP:OUTMOD/>
       <SAP:SNDSAD/>
       <SAP:SNDLAD/>
       <SAP:RCVSAD/>
       <SAP:RCVLAD/>
       <SAP:STDMES/>
       <SAP:REFINT/>
       <SAP:REFGRP/>
       <SAP:REFMES/>
       <SAP:CREDAT>0000-00-00</SAP:CREDAT>
       <SAP:CRETIM>00:00:00</SAP:CRETIM>
       <SAP:ARCKEY/>
    </SAP:IDocOutbound>

  • Problem adapter idoc - file ATTRIBUTE_INV_SND_SERV

    Hello All,
    please help me for my problem on adapter in my system XI for a scenario idoc -> file an I have an message error.
    <b>xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
      <SAP:P1>BS_ADONIX</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Unable to convert the sender service BS_ADONIX to an ALE logical system</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error></b>
    Please help if you have some idea BS_ADONIx is a business service.
    Thanks for your reply

    Steps IDOC to File.
    IN IR
    1. Import the IDOC in XI (input).
    2. Create a Data type of (output) i.e. file.
    3. Create a Message type of (output) i.e. file used the above data type.i.e.Step 2
    4. Create a Message interface of(output) .i.e file used the above messagetype. i.e.Step3.
    5. create Mappping select source as IDOC and target as Message type you created.
    6, In Interface mapping select source as IDOC and Target Interface Message Interface of file i.e.Step 4.
    In ID.
    Select the recevier determination of .
    1.select sender system as R/3 system recivr as File Bunisees system
    2. create interface determination select sender system as R/3 Sender interface as IDOC . in interface determination select inbound message whihc createdin step 4
    and message interface we created in step 5.
    3. create recevier determination sender r/3 interface IDOC and reciver File business system . so create reciver file adapter and assign to file business system
    Please reward points
    Thanks
    Sreeram.G.Reddy

  • Acknowledgement - IDoc-File & File-IDoc scenario

    Hi All,
       Acknowledgement is possible in case of asynchronous IDoc-XI-File scenario? If yes, how to setup?
       Same as above question for File-XI-IDoc scenario.
       In case of synchronous scenario, how to setup email with acknowledgement?
    Thanks a lot in advance.
    Sree

    Hi Rama,
    While doing an IDOC -> XI -> File scenario, The Points to noted are:
    1. You don’t need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
    2. You import the IDOC and use the same in your mapping.
    3. In this configuration note that you don’t have a sender agreement as you don’t have a sender IDOC adapter.
    If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
    points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
    IDOC -> File scenario ref:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    File -> IDOC ->
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    (It concentrates on XSLT mapping but also gives an idea about the configuration part. Do go thru that, it might help you.)
    I hope I have answered your query.
    Regards,
    Abhy
    PS: AWARD POINTS FOR HELPFUL ANSWERS.

  • Production Time Issues on IDOC---File Scenario

    Hi All,
    We have done all the IDOC--File scenarios Successfully in DEV System.
    Now its time to Production and Go-Live.
    Q1) Assume If Bulk messages are Failed in RWB-----Receiver CC Due to some error, Then how to Handle these Error messages
    Regards
    Suman

    Hi Mahesh,
    This is My Trace File
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">User: 116866</Trace>
      <Trace level="1" type="T">Language: E</Trace>
      <Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
      <Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
      <Trace level="2" type="T">Tunneling needed?</Trace>
      <Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
      <Trace level="3" type="T">Sender Interface</Trace>
      <Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
      <Trace level="1" type="T">Syntax-Check-Flag X</Trace>
      <Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
      <Trace level="1" type="T">Queueid</Trace>
    - <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
      <Trace level="1" type="T">Get the Metadata for port SAPPIS</Trace>
      <Trace level="2" type="T">----
    </Trace>
      <Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
      <Trace level="2" type="T">Port : SAPPIS</Trace>
      <Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
      <Trace level="2" type="T">Cimtyp :</Trace>
      <Trace level="2" type="T">RFCDest :</Trace>
      <Trace level="2" type="T">Release : 700</Trace>
      <Trace level="2" type="T">Version : 3</Trace>
      <Trace level="2" type="T">Direct : 1</Trace>
      <Trace level="2" type="T">SAPREL : 700</Trace>
      <Trace level="2" type="T">----
    </Trace>
      <Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
      <Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
      <Trace level="2" type="T">----
    </Trace>
      <Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
      <Trace level="2" type="T">Port : SAPPIS</Trace>
      <Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
      <Trace level="2" type="T">Cimtyp :</Trace>
      <Trace level="2" type="T">----
    </Trace>
      <Trace level="2" type="T">Create XML-Control Record</Trace>
      <Trace level="2" type="T">Create XML-Data Records</Trace>
      <Trace level="3" type="T">Create data Record E1WPA01</Trace>
      <Trace level="3" type="T">Create data Record E1WPA02</Trace>
      <Trace level="3" type="T">Create data Record E1WPA03</Trace>
      <Trace level="3" type="T">Create data Record E1WPA04</Trace>
      <Trace level="3" type="T">Create data Record E1WPA05</Trace>
      <Trace level="3" type="T">Create data Record E1WPA04</Trace>
      <Trace level="3" type="T">Create data Record E1WPA05</Trace>
      <Trace level="3" type="T">Create data Record E1WPA04</Trace>
      <Trace level="3" type="T">Create data Record E1WPA05</Trace>
      <Trace level="3" type="T">Create data Record E1WPA07</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      <Trace level="3" type="T">Create data Record E1WXX01</Trace>
      </Trace>
      <Trace level="2" type="T">party-scheme: ALE#KU</Trace>
      <Trace level="1" type="T">party normalization error: scheme = ALE#KU</Trace>
      <Trace level="2" type="T">Set Sender Routing-object</Trace>
      <Trace level="1" type="T">Set Receiver Routing-object</Trace>
      <Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
      <Trace level="1" type="T">COMMIT is expected by application !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
      <Trace level="3" type="T">Getting type of XMB...</Trace>
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="2" type="T">XMB kind = CENTRAL</Trace>
      <Trace level="3" type="T">Start pipeline found</Trace>
      <Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
      <Trace level="3" type="T">No triggers found. OK.</Trace>
      </Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="3" type="T">system-ID = PSX</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = 116866</Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:15:27Z INDIA</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">QOS = EO</Trace>
      <Trace level="3" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">Generate prefixed queue name</Trace>
      <Trace level="1" type="T">Queue name : XBTI0001</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="3" type="T">Setup qRFC Scheduler</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="3" type="T">Call qRFC .... MsgGuid = 481ADC34F6CF1214E1000000AC10100D</Trace>
      <Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
      <Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
      <Trace level="3" type="T">OK.</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Version number = 000</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 001</Trace>
      <Trace level="3" type="T">Message version 000</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
      <Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--start receiver interface action determination</Trace>
      <Trace level="1" type="T">Loop 0000000001</Trace>
      <Trace level="1" type="T">select interface *</Trace>
      <Trace level="1" type="T">select interface namespace</Trace>
      <Trace level="1" type="T">no interface found</Trace>
      <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
      <Trace level="1" type="T">Hence set action to DEL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
      <Trace level="2" type="T">Increment log sequence to 001</Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = PSX</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = 116866</Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Start with given receiver C086 -</Trace>
      <Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
      <Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
      <Trace level="2" type="T">...valid Receiver w/o Condition: - BS_Soap_Service_Qty</Trace>
      <Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
      <Trace level="2" type="T">Number of Receivers:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 001</Trace>
      <Trace level="3" type="T">Message version 001</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_Soap_Service_Qty MI_POS_Itemmaster_OB</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: MI_POS_Itemmaster_OB</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 002</Trace>
      <Trace level="3" type="T">Message version 002</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="2" type="T">got property produced by receiver determination</Trace>
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTO0___0002</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 012</Trace>
      <Trace level="3" type="T">Message version 003</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
      <Trace level="2" type="T">Increment log sequence to 005</Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = PSX</Trace>
      <Trace level="3" type="T">client = 100</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = 116866</Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping already defined in interface determination</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping C5523ABE7D9A35BDABE2082468D67E41</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping 1FB1D8C0010B11DD9AB1F535AC101018</Trace>
      <Trace level="1" type="T">Interface Mapping http://sub-sapretail-pos.com/Itemmaster IM_POS_Itemmaster_OB</Trace>
      <Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_</Trace>
      <Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
      <Trace level="2" type="T">Mode 0</Trace>
      <Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_.</Trace>
      <Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
      <Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_ completed. (executeStep() of com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
      <Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU )</Trace>
      <Trace level="1" type="T">ContentType application/xml</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 005</Trace>
      <Trace level="3" type="T">Message version 005</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
      <Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
      <Trace level="2" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
      <Trace level="2" type="T">-Subhiksha_PIS_subprd1</Trace>
      <Trace level="2" type="T">-BS_Soap_Service_Qty</Trace>
      <Trace level="2" type="T">http://sub-sapretail-pos.com/Itemmaster.MI_POS_Itemmaster_OB</Trace>
      <Trace level="2" type="T">Channel found: - BS_Soap_Service_Qty - CC_POS_Itemmaster_OB_Qty</Trace>
      <Trace level="2" type="T">no header mapping defined</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 006</Trace>
      <Trace level="3" type="T">Message version 006</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS =</Trace>
      <Trace level="3" type="T">P_IFNAME =</Trace>
      <Trace level="3" type="T">P_METHOD =</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Unknown channel type: SOAP</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: SOAP</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">return fresh values from cache</Trace>
      <Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
      <Trace level="3" type="T">URL = http://psxprd:51000/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="3" type="T">User = PIISUSER</Trace>
      <Trace level="3" type="T">Cached = X</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Security: Basic authentication</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="3" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="3" type="T">HTTP-client: status code = 200</Trace>
      <Trace level="3" type="T">Deserializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      </Trace>
      </Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 007</Trace>
      <Trace level="3" type="T">Message version 007</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 014</Trace>
      <Trace level="3" type="T">Message version 008</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </SAP:Trace>
    Regards
    Suman

  • IDoc - File Scenario

    Dear SDN,
    We have to develop something like this:
    An IDoc is generated from an ABAP Business System. Using content based routing conditions the IDoc must be sent to different FTP servers. The problem is that the IDoc must be written in its "native plain" format, not in XML format.
    Any ideas?

    hi Gustavo,
    2 ways
    1. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    2. send the idoc from R3 in native IDOC (file port) and just tranport it via XI
    both ways will produce native IDOC:)
    for file ports you can check out my book
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Transfer IDOC File in a Internal Table

    Hi all,
    I need to Transfer IDOC File in a Internal Table.
    Anybody have any idea how  can I do this???
    Regards,

    HI,
    is the IDoc exist in SAP?if IDoc exist in SAP you can use one function module to read the idoc and store tha content in internal table.
    IDOC_READ_COMPLETELY function module will read the specified idoc number.you can retrieve the control records ,status records and the data record of the idoc.for this you have to declare 3 internal tables (check the function modules for the type of inerna table).you can then loop the internal table and read the data.let us know if u have any problems
    regards
    shibu

  • Runtime error (idoc-file)

    Hi  experts
    iam working on IDOC-file scenarion. after mapping design i have tesed my message mapping (without any data) iam getting error "RuntimeException in Message-Mapping transformation: Unparseable date: ""
    then i tetsed the scenario end to end , an outbound IDOC is genarted but in sxmb_moni the status is RED and the error is "RuntimeException in Message-Mapping "
    i copied the payload XML message and retested in IR this time the error is :
    "Cannot produce target element /ns0:MT_porder. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd"
    please suggest me what could be the error
    regards
    vasavi

    hi suddha,
    tahnks for your reply.
    i checked in RWB>adapterengine->FTP-->
    Receiver Adapter v2123 for Party '', Service 'Sys_DMattec':
    Configured at 2008-07-28 17:01:23 EDT
    History:
    - 2008-08-06 10:36:02 EDT: Processing finished successfully
    - 2008-08-06 10:36:01 EDT: Processing started
    - 2008-08-06 10:29:36 EDT: Processing finished successfully
    - 2008-08-06 10:29:35 EDT: Processing started
    - 2008-08-05 16:38:04 EDT: Processing finished successfully
    but as u said i didnt find anywhere
    >>>if successful you get a Status Msg DLVD (Delivered)
    please tell me how can i check auditlog?
    Iam not sure what kind of ack message you are looking at for FTP protocol. Can be a bit more clear on that?
    in sxmb_moni --XML message
    status                                ack.status
    processed sucessfully      ? (still waiting )
    regards
    vasavi

  • Problem in SOAP to IDOC & File scenario

    Hi,
    My scenario is SOAP ->IDOC and FILE,when I run the scenario IDOc was processed and File was not created at the target system.I maintained LS name for sender SOAP and IDOC business service.Nothing was maintained in adapter spec identifiers for Recer business service(i.e For target File CC).This was working fine in Dev.After Importing another scenario which uses same business service,this didnt stp working?
    what could be the reason?
    Thanks,
    RP
    Edited by: RP@261 on Oct 21, 2008 10:59 PM

    > my imported scenario and existing scenario in QA using same sender business service.After importing the other scenario,existing scenario is failed to create files at target system even though it shows successful in MONI.
    >
    Check the target dir permission once again from your BASIS team. Reconfirm the the target dir name in receiver CC also.
    > Should we maintain Logical system in adapter specific identifiers for Recr File CC also??? I create a file in BI application server from recr File CC.
    >
    No, for creating a file you don't require this. This is required only in case of IDOC.
    > my scenario is
    > (SOAP sender) -->  TO IDOC & FILE  ..i maintained LS name in sender BS where SOAP CC is created and also at Recr BS where IDoc CC is created. The other Recr BS for File where I didn't.IS it required ?
    >
    For File recever BS, No need.

  • IDOC - FILE Issue

    SCENARIO: IDOC-FILE
    IDOC: COND_A04
    DESIGN: Two namespaces with DT,MT,MI,MM,IM for sales condition and purchase condition.
    Here based on the condition(LIFNR) i have to schedule the message to either salesconditon CC or purchasecondition CC.
    REQUIREMENT: If LIFNR has value in IDOC it should go to SALESCONDITION receiver CC, else PURCHASECONDITION.
    I need the condition to be given in receiver determination.
    note: we are using different structures for salescondition and purchase condition even the idoc is same.
    thanks in advance

    Hi,
    First check some links on xpath and then put the condition in receiver determination
    XPath to show the path (Multiple Receivers)
    http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
    http://www.w3schools.com/xpath/default.asp
    http://www.w3schools.com/xpath/xpath_operators.asp
    Customise your 'XPATH' Expressions in Receiver Determination
    Multiple Inbound Interfaces within a Service
    Have a look into this link for complete understanding about XPATH Predicates.
    http://www.tizag.com/xmlTutorial/xpathpredicate.php
    Customise your 'XPATH' Expressions in Receiver Determination
    Multiple Inbound Interfaces within a Service
    XPath to show the path (Multiple Receivers)
    http://help.sap.com/saphelp_nw04/helpdata/en/59/e1283f2bbad036e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/13bf7191e73a4fb3560e767a2525fd/content.htm
    https://forums.sdn.sap.com/click.jspa?searchID=12418562&messageID=5232329
    http://www.tizag.com/xmlTutorial/xpathpredicate.php
    XPath to show the path (Multiple Receivers)
    http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
    http://www.w3schools.com/xpath/default.asp
    http://www.w3schools.com/xpath/xpath_operators.asp
    Customise your 'XPATH' Expressions in Receiver Determination
    Multiple Inbound Interfaces within a Service
    http://help.sap.com/saphelp_nw04/helpdata/en/59/e1283f2bbad036e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/13bf7191e73a4fb3560e767a2525fd/content.htm
    Regards,
    Phani

  • Routing based on header record RECPOR in IDOC File

    I am working a flat file (actually, its an IDOC file) that will enter the configuration scenario through a Seebruger SFTP adatper.  Since this is a flat file, and not XML, I need to convert this to XML prior to doing content based routing in the receiver/interface determination.
    I am most concerned with the RECPOR field.
    RCVPOR : Receiver port
    internal data type : CHAR
    Internal length : 000010 characters
    Position in segment : 024, Offset : 0263. external length : 000010
    The scneario is a simple passthrough.  What I envision doing is converting the IDOC Flat file to an XML structure, then doing content based routing on the one field I am interested in, as mentioned above.
    Is there a way to do this without modifying the payload in teh sender/receiver channels, or am I going to be forced to doing content conversion with MessageTransformationBean?
    Since all of my routing will be done on 10 characters, I see breaking the file up into 3 fields...characters 1-263, 263-273, 273-EOF does some one have a sample of how to separate this, and how to recombine the values in the receiver?

    If I wanted to break the file up into 3 elements in a simple XML strcuture....
    I know its possible to do this using fixed field lengths...is there a method to break that file up int a simple xml structure with, lets say, 3 elements....
    Where field 1 contains from the start of the file (1) thorugh say character 31.  Filed 2 contains 31-41 then the third field to contain the rest of the file?  These 'flat files' could be any one of a dozen or so IDOC files that are being sent to me from an external EDI Translator.

Maybe you are looking for

  • Help needed in getting the Role Description from BOL Entities

    Hi All, I am trying to retrieve BP Role and BP Role Description and display the details at the top of account over view page. I am fetching the BP Role details using 'BuilRolesRel'. but i am not able to find any BOL Query to get Role Description. Any

  • Uses & syntax of classes

    hi friends, I am making a chatting messenger using socket programming in java,I have some problem in establishing chatting session between two clients,where server just provide socket address of the c2 to c1,and then two client connect to each other

  • Sent icloud email reported as "malformed header"

    A friend found one of my icloud account emails in their spam folder, automatically put there by their email provider. In the message they had appended a scoring for why the email had been put there, some of which was based on the content I sent (most

  • IPhone 4 Calendar Holiday Dates are Wrong

    I just purchased an IPhone 4, and I notice that the holiday dates in my calendar are all incorrect. A search of the net has provided no solution. Help? Additionally, my OS is 4.3.3, which is not available for selection on the dropdown menu. I'm not v

  • "Over 100 New Features List" ??

    Ever since the release of IOS4, I have heard the term "over 100 new features" thrown around, yet I can not find an official list of these features. Does anybody know where an official list can be found with each feature number listed out? I feel like