IDoc filter not working

Hi,
I've created a filter on my reduced message type from MATMAS in BD64. I'm filtering based on Plant (WERKS). But it isn't working... It sends out all plants using my message type. Is there some step that I've missed out???
-Vartika

Hi,
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for detail information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

Lens Correction filter not working?

I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

Jeff,
   Thanks for the quick answer, but I still think the menu is misleading.
   If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
   The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
   Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working?

N5K : ethanalyzer capture-filter not working

N5K, NX-OS 7.0.5
ethanalyzer capture-filter not working whatever the filters used;
I understand the capture-filter values are different from display-filter;
for example :
ethanalyzer local interface inbound-hi capture-filter 'ip proto 89' limit-captured-frames 0
I tried "proto 89", "proto 0x59", and te same with ' ' instead of " ";
none is rejected but no frame is captured
If I use "ospf" as the capture-filter, I get the following normal since "ospf" is a display-filter :
tshark: Invalid capture filter: "ospf"!
That string looks like a valid display filter; however, it isn't a valid
capture filter (parse error).
Note that display filters and capture filters don't have the same syntax,
so you can't use most display filter expressions as capture filters.
See the User's Guide for a description of the capture filter syntax.
no problem with the following display-filter :
ethanalyzer local interface inbound-hi display-filter "ospf" limit-captured-frames 0
Any idea ?
thanks

i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered?

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

Oil Paint Filter not working - CS6 - Can you help resolve this?

Can you help? The CS6 oil paint filter is not working. The error is: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have the latest graphics driver software. I have the latest update for CS6. I have followed various community support recommendations to no avail.
In the Advanced Graphics Processor settings (preference, performance) only "Basic" is available and I can't select (grayed out) "Use Graphics Processor to Accelerate computation" and can't select "use OpenCL".
My System: Windows 7 (64 bit), HP Pavilion dv6-3250us Notebook with Intel(R) High-Definition Graphics Driver.
Here is system information (from CS6):
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3894 MB
Free memory: 897 MB
Memory available to Photoshop: 3318 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1723 MB
Video Rect Texture Size: 4096
Serial number: 95478109889423625236
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Chris\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 669.3G, 316.9G free
D:\, 29.1G, 3.72G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

You haven't installed the Photoshop updates -- you should be on 13.0.3 or 13.1.1, not 13.0.0.
Oil Paint uses the GPU, and requires a decent GPU.
Your GPU doesn't support many of the features needed by the Oil Paint filter, and barely supports any of the GPU features in Photoshop (notice that it does not support OpenCL, or Normal or Advance mode for GPU drawing).

Is prompted filter not working correctly with calculated items

Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
Jonni

Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith.

Filter not working for session timeout

Hi all,
I am working on a struts application in portal. I want to logout of the application when a user does not perform any action, for say 30 mins. For this, i am using a filter and defined the filter as follows in web.xml.
<filter>
<filter-name>PageFilter</filter-name>
<filter-class>SessionFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>PageFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
Also i gave the timeout in web.xml as follows.
<session-config>
<session-timeout>30</session-timeout>
</session-config>
And i had the filter servlet as follows.
public class SessionTimeoutFilter implements Filter
public SessionFilter()
public void init(FilterConfig conf) throws ServletException {
public void destroy()
// Create a new instance of SessionFilter
private static int firstRequest = 0;
public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain)
throws IOException,ServletException
HttpServletRequest hreq = (HttpServletRequest)request;
HttpServletResponse hres = (HttpServletResponse)response;
HttpSession session = hreq.getSession();
try{
if (session.isNew()) {
if(firstRequest == 0){
firstRequest++;
else {
hres.sendRedirect("http://www.google.com");
firstRequest = 0;
return;
}catch(Exception e){
e.printStackTrace();
chain.doFilter(request,response);
When trying to execute this one i am getting a portlet 500 internal error. I am not sure where i went wrong. Can anyone give me a suggestion for this to work in a portal.?
Thx in advance....

Hi,
Thx for ur reply, Here i am using firstRequest as a counter variable. when the session is new and firstRequest is 1, it means that the session has expired and new session started and this is where i am redirecting to another page. The problem is, i think is mainly because of the sendRedirect i am using there in the code. I think sendRedirect will not work in portal, because when i test this application locally , it is working fine. But when i deploy it in portal, i am getting the error. Can you suggest me an alternative for sendredirect in portal.Even i tried with forward but no use.
Thx....

Aspect ratio filter not working properly

I am running LR3.5 on Mac OS 10.6.8 and recently discovered that the aspect ratio filter is not working when used on folders created a few years ago. Specifically, a great many images shot in landscape mode are included with the portrait mode filter instead of in the landscape mode filter. This is not happening with more recent folders. At least one of my camera bodies has been used for images in older and newer folders so I do not think it is the camera's fault. I should also add that the files are saved in the dng format.
I do not know how long this has been going on, since I rarely use the aspect ratio filter. It is even possible that this happened when I converted my catalog from LR2 to LR3. The integrity of the catalog is checked each time I back up, which is whenever I exit. Does anyone have any ideas how to fix this?
Thanks.
Mark

So the metadata is properly showing the images as landscape. Somewhere along the way LR got out of sync, perhaps moving images into a new catalog? As long as there are no portrait Crops on any of these files they should filter properly after resynching the DNG metadata. There have been other posts with this same issue and a bug report to Adobe. Not sure it has been actually fixed though:
http://paulsumberg.com/2010/08/03/leave-it-to-me-to-discover-a-flaw-in-adobe-lightroom/
http://paulsumberg.com/2010/08/14/bug-alert-adobe-lightroom-and-work-around/

Email Filter - level 1 notification filter not working

I run a BES 5.0.2 system with 95 users and many rely on filters to forward alerts from a specific address and flag them as level 1.
Messages Options\Email Filters
Worked like a charm previously, but recently has stopped working.
I've tried every which way, and the phones fail to recognize new filters for level 1 messages.
We recently migrated our BES system to new hardware, but I don't know when this stopped working so don't know if\how it could be related.
Any ideas?
Curve 8330 v4.5.0.127
Battery pull - no change
Filter not showing on BES & Vice versa - seems like something isn't synching. Email and calendar synch AOK.
Update - Interesting - On the BES server if I create the filter it works, but doesn't synch down to show on the BlackBerry. If created on the BlackBerry, it doesn't work and also doesn't sync up to the BES server.
BES 5.0.4
BES 10.2
Exchange 2010
SQL2008R2

I opened an incident with RIM and after an hour of troubleshooting have partially narrowed it down and resolved the issue on my device - now for the other 90+.
We did 2 things at once - changed to default policy, and secondly deleted the desktop sync and desktop cmime service books, then repushed them out from BES. This fixed it.
Tech said I could push service books to all users, but didn't advise as to a way to delete service books via BAS.
I checked a number of users and their service books are showing our old SRP info - so after the migration the new service books look like they haven't pushed down.
BES 5.0.4
BES 10.2
Exchange 2010
SQL2008R2

Servlet Filter not working in Oracel9iAS(9.2.0.3)

Hi,
May i know what cause the servlet filter not workinng in Oracle9iAS? Is there any library files missing? I have tried deploy the war file in Tomcat but is working fine but when i try to deploy in Oracle9iAS, the application seems like can't call the servlet filter.
Please advice.
Thanks.
Regards,
Ming Jade

I'm not exactly sure what version you are using.
Servlet Filters were introduced in Servlet 2.3 which was part of J2EE 1.3.
Oracle9iAS 9.0.2.3 is J2EE 1.2 compatible .
Oracle Application Server 10g 9.0.4.x and 10.1.2 is J2EE 1.3 compatible
Oracle Application Server 10g 10.1.3 is J2EE 1.4 compatible.
So the problem could be that the version of the product you are using does does not support the version of the servlet spec that covers Servlet Filters.
Can you upgrade to/install the 10.1.2 release as a minimum?
cheers
-steve-

Table date filter not working properly

Hi OTN,
I have noticed that table date filter not always working properly.
When I copy actual value from column outputText to column filter and hit Enter - I see an empty table.
http://imageshack.us/photo/my-images/818/filter.png/
I suspect the problem to lie among date formats.
But I tried to delete convertDateTime from outputText or add it under filter inputDate. Nothing helped.
<af:column sortProperty="Hisdate" sortable="true"
                                 headerText="#{bindings.InformationView1.hints.Hisdate.label}"
                                 id="c8" visible="false" filterable="true"
                                 width="83">
                        <af:outputText value="#{row.Hisdate}" id="ot5">
                          <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                        </af:outputText>
                        <f:facet name="filter">
                          <af:inputDate id="id15"
                                        value="#{vs.filterCriteria.Hisdate}"
                                        columns="8">
                            <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                          </af:inputDate>
                        </f:facet>
                      </af:column>Nothing special about the attribute. A database table field of type DATE. In database this (see picture) row has exactly "06.06.2006".
Could you please point me out where to start seeking?
Thanks.
JDev 11.1.1.4

Well, OK. I think I'd better have 2 attributes: truncated date for filter and full date with time for edit.
What is an attribute type for datetime?
select trunc(t.HISDATE) AS HISDATE -- date attribute type
    ,to_char(t.HISDATE, 'dd.mm.yyyy hh24:mi') AS HISDATETIME -- timestamp/date attribute type?Something like this?

Excel Filter not working in Bex

Hi All
I have a report in Bex where I have a date field called basic date. Now when user is trying to select some basic function like greter than or less than a particular date(When we apply filter in excel we have the optioon Custom where so many option like greter than, less than, equals are available). It is giving blank value. I tried to change the format to date but still not working.
Please suggest.
Sunny

Hi Sunny,
The problem occurs if you set your auto filter in the wrong cell. I have found the easiest way to get auto filter to trigger in the correct cell is to click on a blank cell (i.e. outside of the analysis grid) and then switch on auto filter in Excel as normal. You should find that the filter icons appear in a different set of cells and when you use them they will contain the values in the columns.
Hope this helps!

IDOC is not working

Hi,
We have 2 company codes and for the intercompany trade we are using IDOC to send invoices between the companies - it works perfect. Now we have added a third company code and the IDOC functionality does not work for intercompany trade involving the new company. All about pricing, requirements, PO, delivery etc. works without problems but the IDOC process does not start when we create the invoice - so i don't even have error to trace. I have created OBCA, OBCB, OBCD and OBCE and of course WE20.
A tip for the missing link will be really appreciated - thanks in advance
yu

With reference to this issue, please review note 106142 which has good
information on this behaviour.
Transaction OBCA is not really a customizing function since the table
as the partner numbers in the key, and these are master data, at
east in case of vendors (partner type LI). Thus, table T076B should not
ransport relevant. But there's been a couple of bugs in the lower
releases (note 106142) and they're fixed in release 4.70 and higher.
Similarly the tables like T076S as well as view V_T076S depend on master
data (like vendor master data), the standard settings of these tables
do not implicate transport requests.
Within note 106142 incorrect table settings in lower releases were
corrected to avoid the transport of these tables.
If you nevertheless want to transport changes of these tables you have
to undo the change of the recording routine in transaction se54.
For these tables change it back to Standard Recording Routine and save
the changes. Please do NOT generate the view.
But please keep in mind that this setting represents a modification
and possible problems due to this setting are not supported by SAP.
tr. SE54 ->
Table/View: T076M
select the radio-button 'Generated objects' ->
select the button 'Create/change' ->
frame 'Dialog data transport details' ->
'Recording routing' -> please, select option 'Standard recording
routing' and save your settings.
PLEASE, DO NOT REGENERATE THE VIEW !!!!
Further details which may be helpful:
You have to change
the view T076M for the transaction OBCD
the view V_T076S for the transaction OBCE,
the view V_T076K for the transaction OBCC,
the view V_T076B for the transaction OBCA,
the view V_T076I for the transaction OBCB.
Please also review the SAP notes.
356483     Customizing: Current settings in the test system
135028     Transfer IMG activity to current setting
106142     EDI: Customizing tables T076B, T076I,...
Regards
Vijayesh V V

GPP item-level targeting filter not working as expected

I am trying to set the Internet Explorer homepage via user Group Policy Preferences (GPP) registry setting for a very specific group of users. I am using item-level targeting to accomplish this but am having trouble getting the logic working as expected.
Here is my item-level targeting filter:
The user is a member of the security group CONTOSO\FireRescueDept
AND this collection is false
The user is a member of the security group CONTOSO\EmergencyManagementDept
OR the user is a member of the security group CONTOSO\PublicSafetyDivision
The user in question is a member of both CONTOSO\FireRescueDept and CONTOSO\EmergencyManagementDept. I believe this means that this particular registry GPP setting should NOT apply to the user in question and that is the outcome I desire.
Here is how I'm thinking about it:
The user is a member of CONTOSO\EmergencyManagementDept; therefore, "The user is a member of the security group CONTOSO\EmergencyManagementDept" evaluates to TRUE.
Since the other item in the collection is connected with the boolean OR operator, the collection evaluates to TRUE regardless of the evaluation of "The user is a member of the security group CONTOSO\PublicSafetyDivision."
The item-level targeting filter is looking for the collection to evaluate to FALSE. Since the collection has evaluated to TRUE, the evaluation "This collection is false" is FALSE.
Because of the AND operator in front of "This collection is false", both "The user is a member of the security group CONTOSO\FireRescueDept" and "This collection is false" must evaluate to TRUE in order for the item-level targeting
filter to determine that the user in question to apply the GPP setting the filter is attached to. However, since "This collection is false" has already evaluated to FALSE, the filter as a whole should evaluate to FALSE and this GPP setting
should not apply.
However, according to gpresult it does apply.
Please advise. I want this particular setting to apply to users in the CONTOSO\FireRescueDept group unless they are a member of CONTOSO\EmergencyManagementDept and/or CONTOSO\PublicSafetyDivision.

Am 21.05.2013 16:22, schrieb Scott W. Sander:
> Does item-level targeting not work with Universal security groups
> because the group policy client isn't able to determine that the user
> is a member of groups of that type?
In my experience, it DOES work with universal groups... Are you
suffering from token bloat? How many groups is the user a member of?
http://blogs.technet.com/b/shanecothran/archive/2010/07/16/maxtokensize-and-kerberos-token-bloat.aspx
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!

IDoc filter not working

Similar Messages

Maybe you are looking for