Idoc for CRM product and relationships

Hi,
I am looking for an IDOC for product in CRM that has also a structure representing the relationships with other products.
The transaction is COMMPR01, chose a product (of type materials), on the top of the page there is a button 'Relationships', the Accessories tab, there you can enter other products, I need an IDOC that represent this structure.
Thanks,
Naama.

Hi Namma,
In crm no IDOC's are used only BDOC'S . You can look in to that angle.Like that u can get some clues.
Thanks and regards,
kumar.

Similar Messages

  • CRM table and relationship diagrams

    Hi all,
    Could anybody please send the
    CRM technical guidelines (how it works)
    CRM TABLES and Relationship diagrams
    CRM application guidelines
    mail : [email protected]
    Kindly send urgently !
    Thank you very much in advance. I will be happy to reward points for any inputs.
    Bhakti

    Hi Bhakti
    You can order the OBJECT MODEL KIT from SAP in addition to the CRM software. This is a collection of object and data models for both CRM Online an Mobile Sales. It can be ordered from SAP the same way you can order the SW.
    Regards, Kai

  • Tcode for planned production  and actual production

    Hello,
    I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
    Thanks in advance

    Hey Suman,
    i have the same problem, did you find a solution?
    thanks

  • I am unable to download the product I purchased.  I have followed the instructions, gone to my command/order which states I have paid for the product and it is ready to download.  I have then, gone to 'my downloads' and it advises me that I have no downlo

    I have followed the instructions, gone to my command/order which states I have paid for the product and it is ready to download.  I have then, gone to 'my downloads' and it advises me that I have no downloads available!  What next?

    The product is online and accessible via the web site.  It was accessed via an email connection. 

  • Hi, I would like to install my Creative Suite 5.5 Design Standard - I got the serial number and disk, but you are asking for another product and serial number that I dont have? What should I do?

    Hi, I would like to install my Creative Suite 5.5 Design Standard - I got the serial number and disk, but you are asking for another product and serial number that I dont have? What should I do?

    The serial number that you might have is an upgrade version & it will be asking for a previous qualifying version serial number.
    The issue can be different too, please contact Adobe Support for resolution: http://adobe.ly/yxj0t6
    Regards
    Rajshree

  • CRM Tables and Relationships needed!

    HI experts,
    I am a part of CRM and BW implementation.
    As iam new to crm Can anybody send me the CRM Tables and Relationships at <removed by SDN Forum Moderator>

    Hello,
    please have a look to the Topic Links to CRM Documentation there you find instructions how to order the CRM Tables and Relationships documents.
    Regards
    Gregor Wolf
    SDN CRM Forum Moderator

  • Settings for co-product and by-product

    Hi Gurus,
    Can you please tell me what are the settings i need to maintained for co-product and by-product.
    Regards
    Rajib

    Hi,
    For Co-Products do the following settings.
    1. Select Co-Product indicator in MRP2 view for header material 
        as well as for co-product materials.
    2. Define the co-products as BOM components.
    3. Give negative quantity in the BOM for co-products
        Also select co-product indicator by clicking on BOM item details
        and in the Basic Data Tab.
    4. To calculate the production cost of co-products give equivalence
        numbers in MRP2 view by clicking Joint Production push button
        or  you can give the same in the settlement rule in the
        Production order by clicking Header menu - Settlement rule.
    5. You will get the GR qty for co-products while doing MB31, 101
         for  the order of the header material
    For By Products
    1. Donot set the co-product indicator any where.
    2. Define the By-Products as BOM components and give negative qty.
    Regards,
    Prasad

  • Looking for standard IDOCs for Currency Codes and Product Hierarchy

    Hi,
    Does anyone know what the standard outbound IDOCs there are for Currency codes and their descriptions and for the Product Hierarchy and their descriptions?
    Cheer

    Hi,
    I don't know about Product Hierarchy but if you want to send Currency codes
    I believe the easiest way would be to create an raport with a select statement that would invoke an ABAP Proxy to send those codes with descriptions
    Regards,
    michal

  • Tables for marketing attributes and relationship

    Hi anyone!
    I'm creating InfoSets in CRM and I need the tables containing marketing attributes and relationship for BPs. Does anyone of you know which tables this data is stored in???
    Regards Camilla

    Hi Camilla,
    Another option to reading tables : you can use function module CRM_MKTBP_READ_BP_LIST giving the BP guid in table IT_BP_LIST. This will give you the attribute set along with the attributes and their values assigned to the BP.
    Example call:
    Test for function group      CRM_MKTBP_DB           
    Function module              CRM_MKTBP_READ_BP_LIST 
      Import parameters               Value             
      IV_LANGU                        EN                                                                               
    Tables                          Value             
      IT_BP_LIST                         1 Entry        
                       Result:           1 Entry        
      ET_BP_ALLOCLIST                    1 Entry        
                       Result:           2 Entries      
      ET_RETURN                          0 Entries      
                       Result:           0 Entries

  • IDOCs for CRM

    Hi,
    I've read about CRM Middleware, ALE/EDI and the usage of IDOCs for communication between SAP CRM and Non SAP System.
    I need to see the existing IDOCs that can be used for CRM.
    For example I need an IDOC for a Service Order... this is just an example, how can I search them?
    Thanx in advanced.
    By the way, if you have any doc about CRM Middleware and a 3rd party system communication I will be very greatful if you can send it to urjose/at/yahoo(dot)com

    Hi
    r u willing to know abt bdoc in CRM
    toknow abt idoc check this
    http://help.sap.com/saphelp_nw04/helpdata/en/c2/090b374e4e7c64e10000009b38f839/frameset.htm
    for middleware documents take building blocks and follow which will help u a lot
    follow the Building Blocks C71 CRM Connectvity
    B09: CRM Customizing Replication
    C03: CRM Master and Transaction Data Replication
    to download the building block click
    http://help.sap.com/bp_crmv152/CRM_DE/HTML/index.htm
    go to technical Information
    go to building block library
    Reward points if helpful
    REgards
    Manohar

  • CRM product and categories

    Hello Everyone
    I have a requirement to create Product/Category relationship that maps to a new hierarchy. The source data is provided in a spreasheet that has the Product ID, Category ID and the new Hierarchy ID. I would like to read this XL file and create the Product/Category relationship for the new hierarchy. I tried to use the FM "COM_PRODUCT_UI_MAINTAIN". It executes without any error, however I do not see the category & new hierarchy in SAP Basic Data tab of the Material Display screen (Tcode: COMMPR01)
    Is this the correct function module to achieve this purpose?. If not, can someone point to any other function module or send any similar code. Your help is greatly appreciated.
    Regards
    Raju. R

    Hi,
    Try to use CRM_ORDER_READ function module.
    Regards
    Srinu

  • Report for daily production and daily sales quantities

    Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

    Hi,
    You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
    MBLNR-MKPF = MBLNR-MSEG
    MJHAR-MKPF = MJHAR-MSEG
    Sort the results in ERFMG-MSEG and ERFME-MSEG using
    BWART-MSEG = 101 minus 102 (for production)
    SOBKS-MSEG = E
    BWART-MSEG = 601 minus 602 (for sales).
    Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
    Thanks & Regards,
    Abu Arbab A

  • T code for material production and production

    Hi,
    Could any one please tell me the *t-code* to find out monthly/ daily material wise production and consumption report in value and qty as well
    Regards / Ashok verma

    Dear Ashok Kumar,
    Check the reports,
    MCP3,MCPM - for the actual production happened for a period,you can get it daywise for any product.
    MCRP,MCP6,MCRE - Actual consumption of materials during a period for production.
    MB51 - you can get the list of 201 movement(In case if any material is issued against cost center).
    Check and revert back.
    Regards
    Mangalraj.S

  • Function module to get PPM for given product and/or location

    Hi,
    I want to check whether any PPM is existing for given product, location.which function module i can use for the same.

    There is a BAPI that might help - BAPI_PPMSRVAPS_GETLIST which has product and location selection criteria.
    Regards
    Laurence

  • Any standard IDOC  for Goods Issue and Goods Receipt ?

    Hi ALE/IDOC Experts,
    Seeking the experts advise on the following questions.could someone help us please..
    1. We are in need to post an IDOC which should do a Goods Receipt against the open PO - We are struggling to identify the right IDOC and its process code - Do we have any IDOC for that?
    2. We have to do a Goods Issue by posting an IDOC.Please help me in finding out the right IDOC (with Process code) for GI posting.
    We also have a plan to use ORDERS05 IDOC for GI posting by writing the customized process code (considering the future use of ORDERS05 to create SO). You could throw some light on this if possible.
    Thanks in advance,
    RGds,Vasanth.

    Hello Gajendra,
    Thanks for the timely input.I am thinking why not use ORDERS05 idoc and to have a custom code for that to do both GR/GI posting.Taking into account of future use of ORDERS05 in mind.
    I know for sure we can do that for GI.would it be possible to do the same for GR too
    If you can provide your suggestions on this that would be useful as you have already done that.
    Thanks in advance.
    RGds,Vasanth.

Maybe you are looking for