IDOC for SAP BP Message "Table BAPIADTEL entry to be changed

Hi Experts,
I have a requirement to update BP Address details using LSMW.
I am usign IDOC Message Type "BUPA_C_CHANGEADDRESS" and Basic Type "BUPA_C_CHANGEADDRESS01" for this requirement.
Using this i am able to update City, PO BOX, Postal Code, Street, region.
However, i am unable to update Tel Number, Extn, Fax Number and Extension.
I have added Structures E1BPADTELX & E1BPADFAXX and "X" to Update them.
When i run LSMW, it updates all except Tel, Fax and their extension.
I get Status 53 message "Table BAPIADTEL entry to be changed not found in target system". I have requirement to change those numbers.
Can someone please tel me how to update those 4 fields ?
ALso how and where this Data are stored in tables?
Under BP Tcode, Under General Tab, it says "Address Independent Communication.
Please help.
TnR

Have you filled the data in the structure "E1BPADTEL"?
Regards
Vinod

Similar Messages

IDOC for SAP BP Message "Table BAPIADTEL entry to be changed not found in "

Hi Experts,
I have a requirement to update BP Address details using LSMW.
I am usign IDOC Message Type "BUPA_C_CHANGEADDRESS" and Basic Type "BUPA_C_CHANGEADDRESS01" for this requirement.
Using this i am able to update City, PO BOX, Postal Code, Street, region.
However, i am unable to update Tel Number, Extn, Fax Number and Extension.
I have added Structures E1BPADTELX & E1BPADFAXX and "X" to Update them.
When i run LSMW, it updates all except Tel, Fax and their extension.
I get Status 53 message "Table BAPIADTEL entry to be changed not found in target system". I have requirement to change those numbers.
Can someone please tel me how to update those 4 fields ?
ALso how and where this Data are stored in tables?
Under BP Tcode, Under General Tab, it says "Address Independent Communication.
Please help.
TnR

Hello experts, hello to all,
I'm facing with the same task. I have a requirement to update BP postal code using the LSMW.
Identical to Pintoo D I am usign the IDOC Message Type "BUPA_C_CHANGEADDRESS" and the Basic Type "BUPA_C_CHANGEADDRESS01". In the section Field Mapping... I have mapped the Business Partner ID (BUSINESSPARTNER) and the City postal code (POSTL_COD1). In order to update the postal code I set in the Tree-Structure E1BPBUS1006_ADDRESS_X the Field POSTL_COD1 with a constant (= X).
When I try to process the IDoc I get the Error 51:
Data set BUT020 for BP 0000403643 maintained time-dependently,despite inact.time dep.
Additonal I checked the recommenden OSS Note 810634 and the Customizing but everything is OK. Did I mistake during the confuguration of the LSMw project? I cannot find a documentation regarding the IDoc Msg.Type BUPA_C_CHANGEADDRESS.
Kind regards
Ioannis Moutogiorgos

Batch Number field in IDoc for Process Orders (message type LOIPRO01)

Hello PP experts,
Just wanted to ask if anyone of you have worked with message type LOIPRO01 (IDoc for process orders)
There is a segment-field in this IDoc E1RESBL-CHARG which has description of "Batch Number"
We tried to assign a Bath Number for an Order (using t-code COR2 --> "Goods Recpt" tab under "Receipt" section), generated an IDoc for this order, but upon checking the E1RESBL-CHARG field of the IDoc it is not populated with the Batch Number.
The material in the process order is FERT, so technically we're trying to assign a Batch Number in one of the process orders for a Finished Goods material type, so not on the component level.
Can anyone here verify:
1. is the E1RESBL-CHARG field of IDoc LOIPRO01 intended for the Product Batch Number? If Yes, how do we populate that for in the IDoc? --> Do I need to have a Reservation/Dependent Requirement for the Product for the Batch Number to be populated in the IDoc?
2. If E1RESBL-CHARG can not be populated for a Product that has no Reservation/Dependent Requirements, Do I have any option of populating this field with just the Batch Number assigned to the Process Order of that product?

Solved - LOIPRO01 IDoc does not pick up the Batch Number from AFPO table, instead from table RESB. We need batch from AFPO and just created a lookup using the Process Order Number as import param

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

Outbound IDOC for sales order: message type, function module ?

Hi all,
is there a possibility to send out sales order data with an outbound IDOC (like sending an purchase order out with ORDERS.ORDERS05)
I've looked in WE20, for application V1 there are process codes like SD01, SD04, ... but the function modules behind are no existing on our system (release 500)
can anybody give me an little hint?
Thank you very much
best regards Hans

Hi George,
for every process code there is a function module attached you can see in WE41(t-code)..
double click on the Process code you will able to see the Function Module attached to Process code..
and also you can check it out in WE57 (t-code) link between the Function module and Message type and Idoc type..
Process code      SD01
Description       ORDRSP: Order acknowledgment, ORD_ID01 (SD_ORDRSP)
Function module   SD_EDI_ORDRSP_ORD_ID01
Process code      SD04
Description       DESADV: Shipping notif. with DES_ID01 (SD_DESADV)
Function module   SD_EDI_DESADV_DES_ID01
regards,
Prabhudas

IDoc for message type WMPIHU (Creating Pick HUs)

Hi,
does anyone know the structure of the IDoc for the WMPIHU message type?
Is specified by the WM-LSR interface but it's not listed into the "Interface Between the WMS and External Systems" document.
Thanks
Michele

IDOC Bais Type is WMPHID01.
segment type E1LPHUX. you can check the stracture as of your system version in WE31.

SAVE_TEXT for long error Message not working.

Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT = 'DOKU'.
Header-TDNAME = 'ZFQM093'.
Header-TDID = 'NA'.
Header-TDSPRAS = 'EN'.
Header-TDFORM = 'S_DOCU_SHOW'.
Header-TDSTYLE = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
 EXPORTING
 CLIENT = SY-MANDT
 header = header
 INSERT = 'X'
tables
 lines = t_lines
 EXCEPTIONS
 ID = 1
 LANGUAGE = 2
 NAME = 3
 OBJECT = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
 OBJECT = 'DOKU'
 NAME = 'ZFQM093'
 ID = 'NA'
 LANGUAGE = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C' 'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
Akash

Hi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
 and we have to manually save it, but i want to save the text automaticaly
 all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash

Where to get the .SCA files to install NWDI for SAP CE 7.2. JAVA

Hi,
I installed SAP CE 7.2 trial version and i want to to tried NWDI. Where Can i get the .SCA files, and please suggest me a stuff to install the .SCA files.
Many Thanks.

Hi Thongie,
Please have a look at this link
There is no .sca files for SAP CE 7.2 available in service market place, instead you can download the support Packages and Patches - Entry by Application Group" SAP NetWeaver" SAP NETWEAVER" SAP EH FOR SAP NW CE 7.1" Entry by Component" NW Development Infrastructure
DI CHANGE MGMT. SERVER 7.11
DICMS01_0-20002719.SCA for SP1
DI COMPONENT BUILD SERVER 7.11
DICBS01_0-20002718.SCA for SP1
DI DESIGN TIME REPOSITORY 7.11
DIDTR01_0-20002717.SCA for SP1
downlading NWDI trail version
Hope this helps you...
Regards,
Saleem Mohammad.

SAP HR Offline time sheet entry

Hello All,
I am looking for SAP Netweaver based offline time entry(SAP HR)
Is there any SAP provides any solution for offline timer entry.
It should be used for offline time entry(SAP HR) from desktop, laptop and mobile phone like iPhone and blackbarry
Thanks in advance.

Hi Ashok,
Take a look at this sap ppt - http://www.google.com/url?sa=t&source=web&cd=3&sqi=2&ved=0CCkQFjAC&url=http%3A%2F%2Fhelp.sap.com%2Fbp_serv603%2FBBLibrary%2FDocumentation%2F266_Scen_Overview_EN_MX.ppt&rct=j&q=%20SAP%20Netweaver%20offline%20time%20entry&ei=ER4TTcT7G8ih8QOg9vT-Bg&usg=AFQjCNGfZYSkAFswZ228a5CtbdLbc0iUbQ&cad=rja
You can create an application using webdynpro java for doing this and also you can take help of adove interactive forms.
Regards,
Sen

File to IDOC for multiple records

hi friends
my requirement is to design a scenario for FILE to IDOC (for customers) say i have 120 customers. i have changed the XSD file for IDOC and strucked at Integration Process. can anyone guide me in BPM.
thanks and regards
suman.

hi,
you can search sdn for it.
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Single File to multiple IDoc
regards,
ujjwal kumar

Disvantage of Linux for SAP

Look in the company I work in this moment we are using Unix for SAP, but we are deciding the possibility to change it for Linux, but they want to investigate first the disadvantage of doing this, so I need to investigate it, because is easy to investigate the good thinks of Linux but not the problems that could have.

Hi Elsa,
we are running all of our R/3, BW, CRM Systems including XI 3.0 on RHL3 and Oracle as DB and no issue at all. I think the switch from Unix should not be a problem.
Cheers
Stefan

SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'?

Gurus,
when user is updating size grid in matl master, the third party legacy system is reciving the bwlow error:
SAP:E:000:Table 'T100 ' does not contain an entry for ' 000'
could u all pls advise as why this error occured?
Thanks in advance..

t100 is the table that holds all messages in SAP.
The key to access this table is the message class and the message number.
Reading the message that you provided, it looks like SAP is searching for a message number 000 without having a message class.
Do you use any exit with own programming ?
You probably need to debug the program to find the root cause

What is Ale, Edi,IDoc tech for sap

Hi all,
What is Ale, Edi,IDoc tech for sap?
Thanks.

hi deniz,
ALE
ALE
Triggering OB via Change Pointers:
 When an application make a changes in any object an entry is made in CDHDR and CDPOS tables. When any change is made the SMD(Shared Master Data) Tool checks that ALE setting and create a change pointer in the BDCP table that will point to CDHDR table. A standard program RBDMIDOC is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process to distribute to the appropriate destinations. The program will read the table TBDME to determine the IDoc selection program it is MASTERIDOC_CREATE_SMD_MATMAS in the case of MATMAS.
Outbound Process:
When the stand-alone program or the Transaction(BD10) is run, it calls the Idoc
Selection program MASTERIDOC_CREATE_REQ_MATCOR in the case of MATMAS, which is hard coded in the program. The Idoc Selection program reads the master data and create a master Idoc and stores it in the memory. The function module then calls ALE layer by using another function module MASTER_IDOC_DISTRIBUTE which is invoked inside it. Then Idoc filtering, Segment filtering etc.. are done in the ALE layer.
 To dispatch the Idoc to the destination system, the system reads the partner profile to determine the destination system. Then the sending system calls the function module INBOUND_IDOC_PROCESS asynchronously on the remote system and passes the Idoc via memory buffer.
Asynchronous Communication:
The data that is IDocs and the function module are stored in ARFCDATA and ARFCSSTATE tables. The function module ARFC_DEST_SHIP will transports data to target System and the program ARFC_EXCUTE will execute the stored function Module. If communication problem occurs RSARFCSE program is automatically scheduled., if successful, entries in the tables ARFCSSTATE and ARFCDATA will be deleted.
Inbound Process:
The INBOUND_IDOC_PROCESS program is triggered as a result of RFC from the Sending System, the Idoc to be sent is passed as parameter for the function module
In the partner profile if Process immediately is selected then RBDAPP01 program is executed. It will read the process code(MATM) from the Partner profile, which in turn invoke the function module IDOC_INPUT_MATMAS for MATMAS
 Function module will call the corresponding SAP transaction using call transaction or uses direct programs to convert the Idoc to Application document .
In the table TBD51 there will be entries to find which option is used.
Transactions:
SALE - IMG ALE Configuration root
 WE20 - Manually maintain partner profiles
 BD64 - Maintain customer distribution model
 BD71 - Distribute customer distribution model
 SM59 - Create RFC Destinations
 BDM5 - Consistency check (Transaction scenarios)
 BD82 Generate Partner Profiles
 BD61 Activate Change Pointers - Globally
 BD50 Activate Change Pointer for Msg Type
 BD52 Activate change pointer per change.doc object
 BD59 Allocation object type -> IDOC type
 BD56 Maintain IDOC Segment Filters
 BD53 Reduction of Message Types
 BD21 Select Change Pointer
 BD87 Status Monitor for ALE Messages
 SALE Display ALE Customizing WEDI - ALE IDoc Administration
 WE60 - IDoc documentation
 SARA - IDoc archiving (Object type IDOC)
 WE47 - IDoc status maintenance
 WE07 - IDoc statistics
BALE - ALE Distribution Administration
 WE05 - IDoc overview
 BD87 - Inbound IDoc reprocessing
 BD88 - Outbound IDoc reprocessing
 BDM2 - IDoc Trace
 BDM7 - IDoc Audit Analysis
 BD21 - Create IDocs from change pointers
 SM58 - Schedule RFC Failures
EDI
EDI(Electronic Data Interchange )
RFC DESTINATION:
 A logical name used to identify the remote system on which a function needs to be executed.
Partner Profile:
 It defines the characteristics of data being exchanged with the business partner.
Partner Function:
 Role of the partner Eg:Ship-to-party,bill-to-party,etc in EDI and in ALE legacy system or remote SAP system.
Partner type:
 The type of your business partner .
 EDI KU/LI
 ALE -- LS.
Archiving:
 -Need to archive the important transmitted document
-Created in SARA
 -Assigned in WE20.
PartnerProfile Tips:
 RSECHK07- Consistency check for Partner Profile.
 If you want to modify partner profile; copy it and then modify. If you cant modify it , u have to delete it.
 To move partner profile to production system choose Partner -> Transport
Port defintion:
 It defines the medium through which data is exchanged between systems.
 tRFC - Used by ALE
 FILe - Used by EDI
 R/2 system system port For R/2 system
 Internet port - to connect with internet applications
 It also depends on the receiving side. If the receiving subsystem accepts tRFC, EDI also can use tRFC.
Remote Function modules required by Subsystem to send status and inbound idoc to SAP:
Startrfc - Program to execute RFC enabled Fun.mod. in SAP
EDI_DATA_INCOMING - To send data as inbound
EDI_STATUS_INCOMING - To send status to SAP
RSPARAM - To know the gateway service of the SAP system.
Message Control:
 Output controller
 A service program for determining the output type
 To generate and manage various outputs from an application and control their medium and timing of exchange.
 To retransmit the document without duplicating it
Procedure:
 A procedure defines a set of possible outputs for an application
 There may be more than one procedure but only one can be active
 Requirement field in procedure specifies the condition which the sales docu. should reach,for sending the sales order response.
Output type:
Defines the characteristics and attributes of the output.
Access Sequence :
Defines a sequence in which the business rules are checked using condition record of the condition table for proposing output type.
Sapfans Q & A
SREL_GET_NEXT_RELATIONS -
Function Module that will provide me the number of the document that was created by an IDoc
RLSUB020
Program which uses the above function module.
Upgradation problem
When the old version program is upgraded in to newer version(4.0b  4.6c) the SE38 editor wont allow u get thru the programs normally to get rid of this.
Solution:
EDIT > MODIFICATION OPERATIONS > SWITCH OFF ASSISTANT. Hit Enter on the subsequently shown Warnings window. You should now be able to maintain the code as before.
When transporting the dialog program sometimes the links may be missing in the testing and production area. To overcome just check u have properly save your all includes and other stuff in the same request if not, do so. Other options In ver 4.6c -> Within ABAP editor try utilities/Update navigation index
this fixes the links
ALE( Application Link Enabling )
Disk Mirroring:
Changes occurring in the database should reflected to another disk that maintains a mirror image of the main disks contents.
Replicas:
Maintaining redundant data across multiple systems.
ALE:
It provides distributed environment to integrate non-SAP systems
Provides guaranteed delivery of data regardless of network problem to application.
Logical system :
 The systems involved in distributed environment are assigned a logical name which uniquely identifies a system in a distributed environment.
Data Mapping:
 Conversion of a business document in IDoc format to an EDI format (and vice versa) which is performed in the subsystem.
Message Types:
 Represents a business function
 Technical structure is the IDoc type
 Or can say an instance of IDoc.
IDoc :
 They are containers used to exchange data between any two process.
 It represents an IDoc type and IDoc data
 IDoc type is structure and IDoc data is an instance of it.
Pls reward if helpful.

I/B EDI IDoC for Service Ent Sheet & Goods Receipt against PO SAP ECC 6.04

Hi EDI Experts ,
We Have ECC 6.04. We are planning to have inbound EDI IDoC for Goods Receipt against PO & Service Ent Sheet .
1.For Goods Receipt against PO I have identified below Message type:
MBGMCR / MBGMCR03 - Used in SRM Confirmation IDOC from SRM & SUS
WMMBXY/ WMMBID02- Messages Types - I remember used in last Project
Can anyone please suggest/confirm me , exactly which is most used and most suitable ?
2. For Service Ent Sheet inbound posting I unable to find any IDoC and never heard same.
( I learnet that from SUS Service entry posted in ECC by eSOA with PI ( XML).... or in other cases it may created using some BAPi)
What is exact fact ? Is there Service entry sheet can not pe posted by IDOC ? If yes, how ? if now, what is the best options ?
Thanks in advance.
Regards
NAP

Hi ,
In MM-SUS deployment,
Until SRM 7.0 with ECC 6.04, Service procurement using MM-SRV & SAP SUS, was not provided. But, as of “SRM 7.0, only in combination with ECC 6.04 ”, SAP standardized the “Service Procurement” scenario along with Material Procurement for MM-SUS deployment and so fully supported for Material & Services .
Please refer the Note 868192 & 1269540 and Technical scenario matrix ( criterion 18) document for details.
So for there is Enterprise Services ( eSOA) and not IDOC. Please see below messages for Services.
Create Purchase Order
PurchaseOrderERPRequest_Out_V
Outbound
Change Purchase Order
PurchaseOrderERPRequest_Out_V1
Outbound
Receives Service Entry Sheet
ServiceAcknowledgementERPCreateRequest_In
Inbound
Approve Service Entry Sheet-> Send Approval Note
ServiceAcknowledgementERPConfirmation_Out
Outbound

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

IDOC for SAP BP Message "Table BAPIADTEL entry to be changed

Similar Messages

Maybe you are looking for