IDoc goes into error

When i send IDoc to ECC(using standard IDoc) , it goes into error.
error message: No batch input data for screen SAPLSPO1 0500
but when i try to execute this IDoc from WE19, it work perfectly.
any idea, <removed by moderator>....
Thanks in advances!!!
Regards,
Gaurav Nayar
Edited by: Thomas Zloch on Nov 10, 2010 11:17 AM

Hi,
Some input data missing during BDC, what you do, please execute IDOC by giving inbound function module and process it in fore ground, you may know which screen needs input data.
Thanks
RK.

Similar Messages

Idoc going into eror

Hi,
I am creating vendors through XI for normal company code 1000 in ides system. I have set a polling interval of 35 seconds, and placed the XML file in the XI path. Now when the file is picked up, the idoc is posted, but goes into error saying that cross system company code 1000 doesn't exist. But if I post the same idoc through WE19 using the inbound function module, the vendor is created successfully. Has anybody faced this problem?
Regards,
Vijay

Hi Vijay,
Have u done the mapping similar to this... Use constants for those which values are mentioned and reaming from File.
The mapping details are
Vendor Number     CREMAS03 E1LFA1M-LIFNR
Last Name     CREMAS03 E1LFA1M-NAME1
Search Term     CREMAS03–E1LFA1M-SORTL
     CREMAS03 E1LFA1M-SEGMENT            1
     CREMAS03 E1LFA1M-MSGFN     009
     CREMAS03 E1LFA1M-ANRED     COMPANY
     CREMAS03 E1LFA1M-KTOKK     LIEF
Country     CREMAS03 E1LFA1M-LAND1
City     CREMAS03 E1LFA1M-ORT01     CITY
Zip     CREMAS03 E1LFA1M-PSTLZ
     CREMAS03 E1LFB1M-SEGMENT     1
Vendor Number     CREMAS03 E1LFB1M-LIFNR
     CREMAS03 E1LFB1M-MSGFN     009
     CREMAS03 E1LFB1M-BUKRS     3000
     CREMAS03 E1LFB1M-AKONT     31000
     CREMAS03 E1LFB1MFDGRV     A1
Vendor Number     CREMAS03 E1LFM1M-LIFNR
     CREMAS03 E1LFM1M-EKORG     3000
Currency     CREMAS03 E1LFM1M-LIFNR     INR
     CREMAS03 IDOC-BEGIN     1
Pur Group     CREMAS03 E1LFM1M-EKGRP     010
Group     CREMAS03 E1LFM1M-KALSK     01
My scenario is working fine ...
Check once
Regards,
Sridhar

Purchase Order going into Error in process while ordering from SRM.

Hello All,
We are facing a typical issue where the PO is going into error while ordering from SRM. The error message is ' 17.09.2010 12:45:35 Purchase order XXXXXXX: G/L account XXXXXX cannot be used (please correct ) '
Is there any mechanism/tcode where we can list out the Backend errors in SRM?
We are using SRM 4.00.
Thanks.
Rgds,
Arnab

ask your FI /CO consultant
since there are different types of GL accounts like expense , inventory .
so he can guide you well what GL account is correct
as well check product category vs gl account configuration.

Purhase order output type ZYT3 going into error when triggeralong with ZMY1

Hi Experts,
We am currently having this problem:
While creating PO, we save 2 customized output types(ZMY1 & ZYT3 - 2 different print programs) together, with the same Dispatch time: Send immediately(when saving the application). But the ZYT3 will always have the error u2018No print-relevant changes to document existu2019(ME140).
We found that the error appears because the data in NAST is not passed to the customized program.
We put a breakpoint at the statement
"PERFORM (TNAPR-RONAM) IN PROGRAM (TNAPR-PGNAM) USING RETURNCODE US_SCREEN IF FOUND." in program RSNAST00 and the next step is going into the first statement of the customized program. For output type ZMY1, data in NAST is passed to the program. However when it reached the next output type ZYT3, data in NAST missing.
However, if we print ZYT3 individually or with different dispatch time, there is no problem.
Please let me know whatu2019s the possible cause. Any input will be really helpful. Thanks in advance.

Can please share the processing log what it says?
You can find the details from message tab in initial screen of PO transaction.

I am trying to use the search engine and it goes into error every time. What am I doing wrong?

My I-Tunes search engine goes in to error when I try to search for something. What cam I do to fix this?

Do you mean the Search box at top right of iTunes?
goes in to error
What error does it "go in to"?

Using Custom.pll on AP Invoices form goes into error in 11.5.10.1

Hi All,
I am trying to do some customization on APXINWKB (Invoices form) using CUSTOM.pll. But whenever i am trying to open the form after adding the code in CUSTOM.pll i am getting the following error:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.GL_EURO_USER_RATE_API", line 173
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.GL_CURRENCY_API", line 327
ORA-01403: no data found
FRM-40735: WHEN-NEW-ITEM-INSTANCE trigger raised unhandled exception ORA-06502.
I am trying to display a a small message in the new form instance of the above form thru CUSTOM.pll, nothing more than that!!. If i remove the coding, the form is working perfectly. My oracle apps version is 11.5.10.1
Can any body help me??
Raj

Hi Helios,
Thank you for the update, actually the problem is solved.
The issue is : Whenever i am trying to show a message in that form using either form personalization or CUSTOM.pll, it is giving the error, if i do any thing else like 'changing the default where clause etc', it is not giving any error. The problem is only with message. Actually my requirement is changing the where clause, which is happening with out any problem. I dropped the idea of showing the message any way.
This problem is strange. Any ways, i am raising an SR with Oracle.
Raj

Workflow goes into error

There is an invoice approval via workflow. Task is a foreground task(dialog method) and user gets a screen where he has options to approve/reject/ see the docu. Data has been passed to the task container via wf-task binding. task is using a method of delegated BOR. I get an error in workflow that container is not assigned.
Most importantly it doesnot happen all the time. Is it any sync issue or something else. Please let me know.
Thanks in Advance,
Pritam

Hi,
Probable i got the solution. There was one defect in the binding of task. At the time of importing parameter(task --> WF) container element FIPP as well as WIOBJECT of type FIPP was imported in the same parameter FIPP like this
&FIPP& <-- &FIPP&
&FIPP& <-- &_WI_OBJECT&
This was the conflicting importing parameter.
When i removed one of the importing parameter, error got disappeared.
Thanks for your suggestions.
Regards,
Pritam

HP designjet Z3200ps that goes into error message 79.04 when trying to load paper.

The Designjet Z3200ps powers up and comes to ready and ask to load paper. It starts to take the paper and the carriage unit scans back and forth then the display shows error 79.04. I've upgraded to the latest Firmware, But it still does the same thing. Does anyone have any other answers. Thanks

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to configur the user to get notified when IDOC goes in to error?

Hello Experts,
Please tell me how to notify the users when IDOC goes in to error...
please tell me where we can configure this thing,,
Thanks
Venkatesh

Venkatesh,
The best technique for this would be configuring Workflow. Whenever an Idoc goes into an error it will go to the specified user. You have to set it up and can have more than 1 user and also depending on what Idoc failed you can have different users.
Example ORDERS05 failed, let it go to the inbox of the Order team , SHPORD failed , put it in the mailbox of the WM team lead etc.
Read up the workflow documentation of SAP which is really good.
You can do other things, like have a simple email etc. but all will need program changes.
Usually I have seen some teams have the most simple mechanism.
Have a peron check the Idoc that failed and then notify the teams.
Of course 1 person can be only responsible for lets say a few Idoc types.
I have worked in such a environment where I used to look at the Order to cash Idocs ( Orders/Invoices/bank payments etc.)
Also you train the users to look at Idocs and recognise and fix errors, so they are not totally dependent on you.
But Workflow is the best solution according to me.
Regards

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario

RBDAPP01 going into SLEEP Mode and Idocs still in 64 status

Hey all,
I have a Inbound Idoc interface which is being processed using RBDAPP01 Program. The Issue I am facing is that the job running the rbdapp01 program goes into sleep mode even though there are idocs present in 64 status. I tried to debug the work process using SM66 but it does not open any debugging window although it says debugging started. If I cancel the Job and run it again it processes those Idocs Any input on how one can resolve this issue?
Thanks.

Hi Aparna,
Here is extract from SAP material on running RBDAPP01 transaction and possible reasons for delay in processing. HOpe this can help you.
To automate the treatment of IDocs, you must run the ABAP program RBDAPP01 (transaction BD20) in job. This program has a very good option for parallel processing which can reduce a lot the time required for treatment. However use it carefully and make sure you set a packetsize high enough to avoid that your SAP system be overwhelm by demands for available dialog tasks (don't forget one dialog task is monopolized per IDocs packed to treat).
Best Regards,
Krishna

HT1414 iphone 4 goes into recovery mode error 40

iphone 4 keeps going into recovery mode, when try to restore the iphone it comes up with error code (40), how can this be fixed?

Hi November-Rain,
I found the following information about error code 40:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
This information was found here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers!
- Ari

My iPad 2 goes into restore mode almost dailyand can't restore it anymore error 1603

My iPad 2 goes into restore mode almost daily. I usually just restore and sometimes use the iCloud backup. This time, my iPad cannot restore. I have gotten the error message 1603. I have the latest version of iTunes. PLEASE HELP ME

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

Customer Exit var (basedOn 0P_KEYDT) ABAP error - Going into Debug mode

Hello All,
I have created a BEX Query based on Infoset, so i couldnt use '0P_KEYDT' SAP Exit in a variable.
Instead i created a Z 'Customer exit' with the same code.
But when i execute query in RSRT, query is going into Debug mode.
InfoProviders are all active, when i remove the Z 'Customer Exit' from the query then query is running fine. So i see that the problem is with the Z 'Customer exit' code.
Here is the 0P_KEYDT code:
FUNCTION RSVAREXIT_0P_KEYDT.
*"*"Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_VNAM) LIKE RSZGLOBV-VNAM
*"     VALUE(I_VARTYP) LIKE RSZGLOBV-VARTYP
*"     VALUE(I_IOBJNM) LIKE RSZGLOBV-IOBJNM
*"     VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*"     VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*"     VALUE(I_S_RKB1F) TYPE RRO01_S_RKB1F
*"     VALUE(I_THX_VAR) TYPE RRO01_THX_VAR
*"     VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*"     VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*" EXCEPTIONS
*"      UNKNOWN_VARIABLE
*"      UNEXPECTED_VARTYPE
*"      VARIABLE_INITIAL
DATA:
      LS_RA_SID TYPE   RSR_S_RANGESID.
IF I_STEP EQ 0 OR                    " without popup or
     I_STEP EQ 1.                      " before popup
    REFRESH E_T_RANGE.
    CLEAR: LS_RA_SID.
    LS_RA_SID-SIGN = 'I'.
    LS_RA_SID-OPT = 'EQ'.
    LS_RA_SID-LOW = SY-DATUM.
    APPEND LS_RA_SID TO E_T_RANGE.
ENDIF.
ENDFUNCTION.
Here is Z 'Cusotmer Exit Code: (Defined I-STEP and E_T_RANGE)
method ZPKEYDT.
Data: ls_var_range TYPE rrs0_s_var_range,
        l_s_range TYPE rsr_s_rangesid.
IF I_STEP EQ 1.
REFRESH e_t_range.
    CLEAR: l_s_range.
    l_s_range-SIGN = 'I'.
    l_s_range-OPT = 'EQ'.
    l_s_range-LOW = sy-datum.
    APPEND l_s_range TO e_t_range.
ENDIF.
endmethod.
I could really appreciate your help!
Thanks in advance,
DC

Hi DeeCh.
If you want to populate the value before the variabel screen input.then please follow below code
case i_vnam.
when 'ZPKEYDT'.
if i_step = 1.
    l_s_range-low = sy-datum..
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
      clear l_s_range.
          endif.
          endcase.
Regards,
Nanda.S

IDoc goes into error

Similar Messages

Maybe you are looking for