IDOC HRMD_A06 Missing Infotype When Outbound

Hi All,
I'm using message type HRMD_A and basic type A06 for my HR outbound IDOC interface.
I did not put any filter for the distribution model, however, when I execute the outbound, it only outbound the IT 2 and IT50 for me. Other infotypes are missing (eg IT 1, 8, 9 etc).
Can you tell me what did I setup wrong? Hope someone can help me because it's urgent.
Many thanks in advance.

Hi,
Hard to say... Are you using PFAL for distribution? Have you check the application log (SLG1 - Object HRALE)?
Have you tried to debug RHALEINI (PFAL)? Are you using an evaluation path to get your population? What transfer mode are you using? (insert? update?) Did it actually works once or you just never make it works?
Kr,
Manu.

Similar Messages

Trigger TPSDLS01 IDoc to external TPS when outbound delivery is deleted

Hi,
We are currently trying to find a solution how to trigger a TPSDLS01 IDoc to external TPS when the outbound delivery is deleted.
In the following SAP article: Logical Communication Processes Between the SAP System and the T - Supply Chain Planning Interfaces (LO-SCI) - SAP Libra… it is said that "...If a delivery is deleted in the SAP system, this deletion command is transferred automatically to all transportation planning systems...". and we're trying to understand how it actually should be configured?
Any advice would be much appreciated.
Thanks!

Hi,
I know this is quite old now....but, did you ever find an answer to this problem?
SR

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

IDOC Segment missing when reaching to ECC

Hi,
This is file-to-IDOC scenario. When file is loaded XI is picking and creating IDOC with all segments as expected in XI, but when reached to ECC sytem main header and item segments are missing.
Refreshed cache, reloaded metadata in XI, did full system cache refresh but no luck.
Checked in ECC thru IDOC_INBOUND_ASYNCHRONOUS function module to create IDOC and it did create successfully with all segments.
Segments are missing only when coming from XI. We are in SAP ECC 6.0 & PI 7.0. IDOC I am using is DELVRY03

Hi Sriram,
Can you please check this note which disucss about the same issue:
Note 1170918 - IDoc adapter: Missing fields and deleted metadata
Regards,
---Satish

HRMD_A06 IDOC EXTENSION FOR INFOTYPE 0001 WHICH HAVING A ZFIELD

hi folks,
i am extending the idoc hrmd_a06. and in infotype 0001 we have zfield. for that z field extension is required. iam tryied with naming convention z1p0001 or ze1p0001. but it throws error from t777d table.so plz let me know how we extend it

hi folks,
i am extending the idoc hrmd_a06. and in infotype 0001 we have zfield. for that z field extension is required. iam tryied with naming convention z1p0001 or ze1p0001. but it throws error from t777d table.so plz let me know how we extend it

Idoc HRMD_A06 problem to update email

Hi Experts,
When I try to make an email modification using idoc HRMD_A06, the email is not existing is not changed, a new email is inserted.
In order to update/insert employers emails I'm using the Segment E1P0105
of Infotype 0105.
Follow below the values that I have used to try update email:
PERNR = 01914925
INFTY = 0105
SUBTY = 0010
ENDDA = 31.12.9999
BEGDA = 01.01.2006
SEQNR = 000
USRTY = 0010
USRID_LONG = [email protected]
Just data from email has been not updated.
Thanks in advance.
Regis Ferrato

just see simple scenario -
1) if for a employee the reocord of IT0105,0010 exits already as -
start date - 01.01.2005
enddate - 31.12.9999
email - [email protected]
2) now u want to update it,it can be doen in 2 ways -
a) if u want the new record the same start date as the of existing one then
start date shud be 01.01.2005 only.
b) but if u r changing start date of new record as 01.01.2006 then wht SAP wil do is - delimit the old record and make it valid upto 31.12.2005 and a new record will be inserted with STart date from 01.01.2006 and end date 31.12.9999.
hope u got my point.
amit

HRMD_A07 Idoc to update InfoType 0014 does not delimit existing PA0014 rec

In ECC 6.0, we are using HRMD_A07 Idoc to update infotype 0014 using update data received from a third party application. In XI, I am creating the Idoc with Update Code "U" with E1PLOGI, E1PITYP and E1P0014 segments. E1P0014 holds the data for the latest record.
If I directly pass the Idoc thru ALE layer, It creates records for the new date range on E1P0014 segment, but does not delimit the previous record by changing its end date. This results in two records in PA0014 with end date of 12/31/9999 - which is wrong.
I also tried using a wrapper FM to create additional segments in the Idoc representing the existing record in PA0014, with the end date being delimited to incoming record's beg. date minus 1.
This also results in just creating two additional records in PA0014 corresponding to the two segments in Idoc while existing record in PA0014 stays intact resulting in two records with end date 12/31/9999.
I also experimented with setting the lock indicator (PA0014-SPRPS) but that also does not result in delimiting the existing record.
Am I missing something? Is there a piece of config that controls this?
Regards,
The time constraint on 0014 is "2"

Hi Jon and Ashish,
I too am facing the same issue that the new IDOC is not delimiting the previous record.
Can you explain how did u get over you issue.
I'm maintaining the same dates in E1PITYP and in E1P0014.
Thanks,
Jilly

IDOC status "Message scheduled on outbound side"

Hi,
I am working on scenario file->XI->SAP R/3(Using IDOC). I am getting outbound status of IDOC as "Message Scheduled on Outbound side". When I go and see SM58 for user WF-BATCH there exists a entry with status Transcation Recorded". In SM58 if I manually click Execute LUW then only I am getting an IDOC posted in my R/3 box, but this should happen automatically.
Can any one tell me what should I do so that it gets executed automatically?
Thanks In Advance.
Yaseen Mahammad.

Most of the time it is because of the Queues and Logical system. I,e If there is no proper logical systems are created/maintained then it will give problem.
And it also depends on the rfc Dialog users.
Just check this thread-
Problem with IDOCS
Also check in the IDX1 entry...
Thanks,
Moorthy

How can i send Comments field data through IDOC HRMD_A06-E1P0035?

Dear all,
We need to post the legacy system data for infotype IT0035 using IDOC - HRMD_A06-E1P0035 to the SAP R/3 system.In this segment (E1P0035) there no field for the 'comments' to send the data. Pls let us know, is there any way to pass data through E1P0035 segment for the 'comments' field of IT0035?
Thanks in advance.
Ram Rayapudi

Hi Ram,
Comment fields in infotypes are not stored in the infotype-tables itself, but in PCL1-Cluster TX.
In Standard-SAP there is no way to pass this via ALE. Even the infotype-table-field ITXEX, which say that there is any textfield present, is clear in ALE.
If you really need to transfer this data, you have to do ALE-amplifications.
Regards,
Herbert

Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing? When I set up my desktop, I can find some of the pictures. Where do They hide,

Missing Pictures.
Have made a rebbot from Time Machine, and now I lack a lot of pictures. Can see icons, but not enlarge them. Especially pictures where 2009 is included in the date is missing?
When I set up my desktop, I can find some of the pictures. Where do They hide, and what shall I do.
Have made back up, but unfortunately a little too late. What to do?
MacBook Pro 15 "late 2008, Processor 2.53 Ghz Intel Core 2 Duo, Graphics NVIDIA GeForce 9400M 256 MB, Software Mac OS X 10.7.4 Lion (11E53).

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on th

I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.

You haven't a problem. You simply did not read the iWeb Help :

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

My instagram app icon on my iphone 4 is missing. When I go to the app store and try to reinstall it, it says open. When i search for it on my phone it can't find it? What should I do?

My instagram app icon on my iphone 4 is missing. When I go to the app store and try to reinstall it, it says open. When I search for it on my phone it can't find it? What should I do?

Make sure your phone is connected to the computer and iTunes is open
1. Visit Instagram.com from your computer web browser
2. Click "Download in the app store"
3. It will download and show up in your iTunes
4. Highlight and sync the app to your iPhone (note: it will not show up on your phone, even after it says syncing is complete).
5. In iTunes, select the Instagram icon and click "Remove" or "Uninstall"
6. Click Accept and Uninstall when it asks you to confirm as it will remove instagram and its data from your iPhone
7. Disconnect the phone from the computer
8. Manually reboot the phone after exiting all apps
9. Upon re-start, you will be able to access the app in the App Store, and install it

Missing data when exporting to "MS Word (*.doc)" and "RTF (*.rtf)"

Hello,
We are using CR XI R2 SP3 in our product. The reports that we generate (using ODBC dsn) show URLs from the database as hyper link text fields. When we export the report to "Microsoft Word (.doc)" or "Rich Text Format (.rtf)" format, even though the export operation succeeds, the report is missing data when it encounters a URL that looks like following. There is basically no data after that URL.
http://www.xyz.com/kType=t;s.linkName=n;s.t()};s.ssl=(s.wd.location.protocol.toLowerCa
And when it encounters a URL like following, MS Word complains that the file is invalid even though the export succeeds.
https://www.xyz.com/m));if(m%3E0&m!=e)if(parseInt(c.substring(m+1,e%3C0?c.length:e))%3Cd.get
If we export the report to pdf format, then everything works just fine.
Any help on this will be highly appreciated.

Hi Sumit
Try to set the URL field with the RTF format. To do this try following:
1. Right click the field->Format Field.
2. Click the paragraph tab->Text Interpretation->RTF Text
Now try to export it.
Hope this helps.
Regards
Nikhil

IDOC to be triggerd when delivery is being deleted

Hi IDOC Gurus:
I want an IDOC to be triggered when we deleting the delviery. I don't know where exactly i have call my rouintes.
When saving the delivery the VOFM routine is being called, it is 903. However when deleting the delivery it is entering into the userexit , 'userexit_delete' and it is not enetring into any VOFM routines i.e. it is not enteirng into routine 903.
Here VOFM routine are being written to detrmine whether the order is being interfaced to other system or not.
Kindy advise me where exectly i have to call my routine when delviery is being deleted.
Thanks in advance.
Regards
Harikrishna

Thanks, ALL..
There were 2 issues:
1. Access sequence in NACE
2. The SAPscript wsa assigned to wrong place.
This is now rectified.
Quetion on the same lines (hence, on the same thread)
1. Sales order type ZA- Delivery type- LF- Billing type F2.
In the above case, we dont want the delivery document to be printed.
2. Sales order type ZB- Delivery type- LF- Billing type- F2
In this case, only when the sales order is created as ZB (this creates an immediate delivery and there is billing block, thats the difference between ZA & ZB order types.
VV21 can be maintained with either of the below (I mean- we are flexible here)
Shpping point
Delivery type/shipping point
Sales organization
Sales Org/Delivery type
Only in the above case, the delivery document should be printed automnatically.
Is it possible to attain this keeping the delivery type as LF (standard itself)?
Appreciate your earliest response.
Regards,
Shilpa

IDOC HRMD_A06 Missing Infotype When Outbound

Similar Messages

Maybe you are looking for