Idoc & Http adapter

Why do Idoc and Hppt adapters don't have sender agreement

hi,
The idoc and http adapters are present on the integration engine rather than on adapter engine,like all other adapters
Thats why sender agreement is not required.
And in many scenarios you dont need a http adapter at the sender side.
reward points if helpful
regards,
ujjwal kumar

Similar Messages

IDOC [SAP R/3 ] TO SAP XI TO HTTP ADAPTER....

Hi Friends...,
i am new dimension for this sap xi. i want send idoc from sap r/3 to Http
Adapter throw sap xi...
please give details from scratch..
i want to work on this ...
thank you very much..,
regards,
sharath

Hi,
Check this links on how to configure receiver HTTP adapter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
and this link on how to process idocs using idoc adapter.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Regards,
Sudheer.

Idoc and http adapter

Idoc and http adapter resides in ABAP stack. So how do we monitor these two adapters ? It wont be visible in RWB ?

Hi,
To know the difference i suggest u try to do it by ur self only.
Login in to Runtime Work bench- component monitoring-Adapter engine-communication channel monitoring- Filter the communication channel with name.
and click on message id of that channel, it will show u the steps by step log for that channel.
MONI is used for message monitoring.
chirag

IDoc on HTTP adapter

Hi,
what are the steps to post idoc on HTTP adapter.
Regards,
Anurag

Hi Anurag,
It is also possible to post an IDoc to HTTP directly from your ECC syste, without using PI. Please refer to this blog, hint #2, if you are interested:
[Four things you might have not known about IDocs|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/28375]
Hope this helps,
Greg

Deactivate IDOC, HTTP or XI adapter

Hello people,
I have an issue with sender IDOC, HTTP and XI adapter. We want to deactivate these 3 type of sender communication channels. But these adapters run on the ABAP stack and we cant see them in CC monitoring.
Is there a simple way to deactivate these adapters? or we have to delete them to be certain they are deactivated?
Kind regards,
Kamran

Hey
>>We want to deactivate these 3 type of sender communication channels
you don't configure sender CC for the above types of adapters so there is no question of stopping them,a better approac will be to stop the respective sender application which send data to the IE of XI.
stop/modify the change pointers for IDOC,sender application for HTTP and Proxy for XI adapter.
Thanx

HTTP Adapter and Message confirm

Hi Experts,
I don't understand an aspect of communication with SAP PI.
I have a External System that comunicates with SAP ECC via SAP PI HTTP Adapter.
When SAP ECC sends an MATMAS message to External System like payload of HTTP message, How Does External System confirm MATMAS is recived?
In R/3 System there are methods to commit, roll back transaction, there's a similar mechanism with HTTP Adapter?
thanks.
Marco Genova

hi,
>>How Does External System confirm MATMAS is recived?
it does not - http adapter does no support acknowledgments
the only way would be to receive a message back from http to PI
with some status info and for example on the basis of that
change the status of the outbound matmas idoc to - received successfully
but there is no confirmation with HTTP adapter that the message was received
Regards,
Michal Krawczyk

HTTP Adapter Receiver -- Message not arrive

Hello,
i send an IDoc from an SAP System to the PI and then with the HTTP Adapter
to a non SAP System.
The Message didn't arrive.
The Message Monitor says 'Call Adapter'.
Any Ideas?
Regards
Patrick

Patrick
A similar issue has been discussed here:
XI_J2EE_ADAPTER_XI_HANDLER - GENERAL_ERROR
Unfortuantely it is a gnereic error.
Try extending the trace file in the log configurator in Visual Admin to see if you can get a better indication of what is triggering the error.
Try running RSXMB_ACTIVATE_ICF_SERVICES in SE38 to see if this kicks off the Integration Engine services.
Also, check page 29 from this guide:
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF

HTTP Adapter and DUNS scheme - possible bug ?

Hi Folks,
I am using the HTTP adapter for posting an XML message which is then redirected towards IDOC adapter ... nothing special here ...
I am using the scheme 'DUNS' and agency '016' to pass along the partner identification when calling the HTTP adapter ...
The HTTP adapter tries to match the given partner information and finds the proper XI Party ... BUT ... it overwrites the DUNS number value with the XI Party but leaves the agency and scheme pointing to DUNS ...
An example
Going IN:
Party = 12345789, Agency = 016, Scheme = DUNS
After conversion
Party = MyPartner, Agency = 016, Scheme = DUNS
So the receiver determination works fine and then we go to the IDOC adapter when stuff goes into error as it cannot convert the given sender information into a proper IDOC partner ...
The whole thing works fine when I am passing along
Party = MyPartner, Agency = http://sap.com ..., Scheme = XIParty
then the IDOC is created and send towards SAP ...
I am thinking that the Sender determination in the HTTP adapter goes wrong as the combination
Party = MyPartner, Agency = 016, Scheme = DUNS
is clearly wrong ... Furthermore I have lost my original DUNS number ( so it cannot be used for example in mappings, etc ... )
Anyone had similar issues or problems with this ?
Regards,
Steven

> I am using the scheme 'DUNS' and agency '016' to pass
> along the partner identification when calling the
> HTTP adapter ...
> The HTTP adapter tries to match the given partner
> information and finds the proper XI Party ... BUT ...
> it overwrites the DUNS number value with the XI Party
> but leaves the agency and scheme pointing to DUNS
Apply note 954645. This should solve the issue.
> Furthermore I have lost my
> original DUNS number ( so it cannot be used for
> example in mappings, etc ... )
The DUNS must be provided in the message payload as well.
Usually the party normalization is done by the adapters in a very specific way. So the RNIF adapter takes the DUNS out of the message payload of the RosettaNet message and does the party normalization with that DUNS.
In the HTTP adapter there is no need for a party normalization as you provide a URL for the HTTP client where you can add the party in the query string.
Regards
Stefan

Error with receiver HTTP adapter

Hi all,
my scenario is the following :
ORDERS05 -> iDoc Adapter -> XI -> HTTP adapter ->URL
I get the following error when calling the HTTP adapter :
HTTP client. Code 108 reason
Error Category = PLAINHTTP_ADAPTER
Error ID = ATTRIBUTE_CLIENT
First we thought that the problem may come from the HTTP server but we tried with these parameters :
Target Host = service.sap.com
Service Number = 80
Path = /
And we get the same error. So obviously the problem is on the XI side...
Did anyone ever had the same problem ? Or has a clue on how to solve it ?
Thank you very much in advance.
Regards,
Julien

Hi,
Pls check in the transacation sicf whether the http service is active or not.
Regards
Priyanka
Message was edited by: Priyanka Balagangadharan

Trace Error in HTTP Adapter

hi,
I am getting this trace when i set the Trace Levels in the Runtime.
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">---- Plain HTTP Adapter Outbound----</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_HTTP_PLAIN_OUTBOUND-ENTER_PLSRV">
<Trace level="3" type="T">Quality of Service BE</Trace>
<Trace level="1" type="T">Get XML-Dokument from the Message-Objekt</Trace>
<Trace level="2" type="T">HTTP-Destination : HTTPS GRAINGER</Trace>
<Trace level="3" type="T">Server abc.com</Trace>
<Trace level="3" type="T">Service-Nr. 443</Trace>
<Trace level="3" type="T">URL /invoke/test/receiveXML</Trace>
<Trace level="3" type="T">~request_method POST</Trace>
<Trace level="3" type="T">~server_protocol HTTP/1.0</Trace>
<Trace level="3" type="T">accept: */*</Trace>
<Trace level="3" type="T">content-type: text/xml</Trace>
<Trace level="3" type="T">msgguid: 44663DECCE9167A6E1000000A628FF7D</Trace>
<Trace level="3" type="T">service: IP_SEND_CXML_PO_TEST</Trace>
<Trace level="3" type="T">interface namespace: http://vb.com</Trace>
<Trace level="3" type="T">interface name: MI_CXML_PO_SYNCH_OUT</Trace>
<Trace level="3" type="T">Header-Fields</Trace>
<Trace level="3" type="T">Prolog conversion Codepage: UTF-8</Trace>
<Trace level="3" type="T">Epilog conversion Codepage: UTF-8</Trace>
<Trace level="3" type="T">content-length 3254</Trace>
<Trace level="2" type="T">HTTP-Response :</Trace>
<Trace level="2" type="T">Code : 110</Trace>
<Trace level="2" type="T">Reason:</Trace>
</Trace>
</Trace>
and this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any tips how to resolve this issue? I am trying to post to an external vendor in a IDOC->XI->XML scenario.
Thanks,
Tirumal

Hi Tirumal!
My scenario is
File->XI-->J2EE application(HTTP Receiver adapter).
I am also using HTTP Adapter Outbound.
XI sends xml file to my J2EE application(servlet).
How to capture information from XML file and display in JSP(browser).
Hoping a quick response !!!
Thnax!

Can I get a response back when I use HTTP adapter

Hi ,
I am doing a integration between SAP and ThirdParty Product using PI 7.1.
The scenario is ThirdParty -> PI -> SAP ,using HTTP adapter between ThirdParty and PI , and IDoc adapter between SAP and PI.
So,its a HTTP sender and IDoc receiver.
So I was just curious to know if the IDoc posting failed in SAP ,can I send a response from SAP to Thirdparty regarding the failure along with some error message.
Thanks for your responses.
Venu

Hi,
It may lead to some timeout problems if you design your scenario as synchronous i.e sending response back to HTTP..
as SAP may take time to process idoc and need to provide response back to PI ..by that time the connection may become invalid and thirdparty may receive response as timeout error...
As anyway PI has the option of Alert managements..you can trigger the error mail to the third party recipients for letting them the status...
HTH
Rajesh

Plain HTTP Adapter

Hi All,
I am working on a scenario ,
ThirdyPartyDB(Oracle) --> PI -->SAP.
I am not using JDBC Sender between OracleDB and PI.
As client wants event based trigger from Thrid party system.When ever a event occurs,the third party system(DB) would send data to PI.So I suggested them to write a Stored procedure to convert their DB Table data to XML format and send it over HTTP .
Now, I need to given them a HTTP URL where they need to send their data.So, in this case will I use Sender HTTP adapter or Receiver HTTP adapter?
Please provide some heelp on the follwoing scenario DB(Stored Procedure) >HTTP Adapter->PI>Idoc->SAP.Could you please givea sample DB stored procedure as how to convert data in DB to XML and send that to HTTP URL.
Venu

>
> 1. Should the URL which I need to provide the DB guys looks like this ,
> http://hostname:port/sap/xi/adapter_plain?namespace=http%3A//svg.com/target&interface=mi_test&service=bs_sender_http&party=&agency=&scheme=&QOS=EO&sap-user=PIapplication user&sap-password=password&sap-client=001&sap-language=EN
>
Yes
Do i need to register do setting XI for this URL , i mean exposing this URL etc...
No need
> 2.Assume that, the DB guy is sending two fields test1 and test2 , so would the XML look like
>
> <?xml version="1.0" encoding="UTF-8"?>
> <ns0:mt_test xmlns:ns0="http://svg.com/target">
>    <test1>value1</test1>
>    <test2>value2</test2>
>    <test3>value3</test3>
> </ns0:mt_test>
yes

Using Receiver HTTP Adapter ?

Hi,
Is it possible to call the Mail service using receiver HTTP Adapter?
Appreciate your help...
Thanks,
kumar.

Hi,
If we are using the multi mapping, Is it possible to call Mail service using SOAP receiver adapter & IDOC has sent parallely..
Correct me if i'm wrong...
Thanks,
vasanth.

3rd party to sap using HTTP adapter

Hi Folks,
I'm sending some IDOC to sap from the 3rd party. I have to use HTTP adapter as sender and IDOC as receiver adapter.
Can you please suggest me how to configure teh sender side. As I know there will be no such configuration for the sender adapter as it is HTTP then how the HTTP adapter will get the data sent by the 3rd party and how it will pass it on to the idoc adapter ?
Regards....

If you like to have more details about the http url
then refer the below link
http://help.sap.com/saphelp_nw70/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
Rajesh

Plain HTTP adapter error

Hello all!
I have a following scenario: IDoc ORDERS05 -> IDoc adapter -> XI -> Plain HTTP adapter -> receiver system.
The error arise when HTTP adapter being called.

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Furthermore, there are two tags "Call Adapter" in XML message (transaction SXMB_MONI).
Please tell me how to solve this problem.
Thanks
Alexander

Hi Seth.
Thanks for your reply.
Unfortunately, your thread didn't help me.
Let me to explain the problem more detail.
The error occurs on outbound channel when Integration Engine is calling the plain HTTP adapter. I think so because no messages appear in Adapter Engine (For check it I use Message Display Tool).
And what is more the error code changed. It is 404 now:

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3>File not found</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 404 reason Not Found explanation File not found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Alexander

Idoc & Http adapter

Similar Messages

Maybe you are looking for