IDOC Import from R/3 4.6C - login issue
Hi all,
I am having difficulties with IDOC import into the Integration Builder (Design). I have set everything up in SLD and in integration builder but am experiences some strange behaviour on import. I wonder if anyone has any ideas!
So if I go to Imported Objects -> Import Of SAP Objects and then fill out my connection data and logon, I get errors. If I logon as myself (a full admin user on the R/3 system - verified and used many times!) I get the immediate message that: "You are not authorized to logon to the target system (error code 1)". I know this not to be true as at the very same time I am logged in via front-end. So I tried SAP* and that works, but only to a point, and I receive a different error message. From reading some relevant notes there are specific authorizations/configuration required which could explain why it fails with SAP* (types are not imported) but I don't want to mess with the SAP* or DDIC user and cannot understand why I can't use any other user regardless it seems of what Authorizations I give them. Any ideas what I am missing!
Many thanks,
Chris
My XI system is XI 3.0 SP11 on Win2003/MSSQL
My R/3 system is 4.6C on Win2000/MSSQL
Hi Chris,
First, look at OSS Note : 807895.
Quick solution would be 'Change ALL your password in XI landscape to Upper case'.
Regards,
Peter HyukJin Joh
SAP Korea
Similar Messages
-
Problem IDOC import from Intergration Builder
Hi all,
Please help me with the following problem:
In the Integration Builder (IB) I want to import an IDOC from a SAP R/3 4.6C system.
I've added software component SAP APPL 4.6c to the repository in the IB and changed setting so it is permitted to import RFC and IDOC interfaces.
On the screen 'Connection data for import from a SAP system' I find a group attribute implying load balancing. But we don't have load balancing in our environment.
When I populate the field with a dummy value and start import RFC/IDOC for the component a wizard appears with the tab 'Load Balanced' activated and with tab 'Direct' deactivated.
I think I should use direct connection but I'm not sure how to configure this for the software component.
Please help me!
Best Regards,
Harald KastelijnHi Harald,
Are you using XI2.0 or XI3.0?
It is not necessary to add a software component. What you should do is under your own software component version, enter the host name in message server, and leave the group field blank. When you actually do the import, you will see that you need to enter "application server" information to overwrite the message server info (XI3 only).
Regards,
Hart -
Importing from powerpoint...508 compliance issues
Accessibility is important to my agency but importing from powerpoint results in slides a screen reader can't read and the image tags identified in the powerpoint don't show up in published projects. Subject matter experts create the content, I put them in captivate 5.5 to add features and make them play with my LMS (SCORM). Adobe says published SCORM projects are 508 compliant but I can't seem to get them to actually BE compliant. Any ideas? I don't see anything in any of the tutorials or available documentation or from iconlogic.
Hi newcd,
I just read the VPat for SQL Server 2008 R2. I do not see where there are accessibility issues for the PDF format. Can you please explain?
http://www.microsoft.com/en-us/government/products/section-508-vpats/default.aspx#fbid=vv_eVaIKitQ
If this is a bug, to get it fixed you would need to contact customer support.
https://support.microsoft.com/en-us/gp/profsup/en-au?wa=wsignin1.0
Brad Syputa, Microsoft Power BI This posting is provided "AS IS" with no warranties. -
I'm trying to import IDOC from SAP, but i'm getting "login failed (authorization insufficient)" error. But i'm able to login into SAP GUI using the same login info. What authorizations/roles i should have on SAP and XI system for IDOC transfers?
Thanks,
AnikaHi Anika,
These roles shud be assigned to the user which you use to login to the SAP R/3 system as from this R/3 system you are trying to import IDoc into SAP-XI after getting connected.
You may be able to login using the id w/o these roles thru SAP GUI but its not necessary that you have authorization to import the IDoc. Hence you need to add these roles to the user profile.
Cheers
JK -
IDOC import from CRM 7.0 to SAP PI 7.0 fails: unable to read segments
Hello,
We want to import an Idoc from a CRM 7.0 system to SAP PI 7.0.
The import fails with the message ""unable to read segments".
The issue is related to ALL Idocs, standard and customer defined.
The result of any import is that we can see the object in the import folder, but the structure is missing.
Importing any RFC from the same CRM system is no problem.
Any ideas?
Your help is appreciated.
Regards
DirkHi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM -
Is it Possible to import an IDoc type from R/3 into APO system
Hi Gurus ,
Could you please guide if we can import an IDoc type from R/3 system to APO system ?? If yes , can you please give the guidelines / step - by - step procedure for this.
Thanks in advance ,
Roselinehi
yes u can export an idoc from r/3 to a legacy system.
the brief outline is as follows:
1. set up an rfc connection. it has to be 'T' type in t-code sm59
configure the saprfc.ini file if on windows based os. if on unix based os configure rfcexec.c to have the login details of apo system.
2.set up logical systems( at least 1 each for r/3 and apo) using T-code SALE.
3.assign clients to the logical sytems using T-code SALE..
4.create ports using tcode we20.
5. create idoc segments using we30 and release.
6. create idoc type using we31.
7. create message type using we81.
8. assign message to idoc using we82.
9.build a customer model using tcode bd64.
10. create an outbound process code usint tcode we41.
it will help if you specify your idoc that you want to use- for vendor, customer and material there are predefined distributions and idocs.
Thanks. -
Unable to import IDOC metadata from 4.6C based R/3 system
As part of a project we are trying to import IDOC interface definition into XI3.0 from our 4.6C based R/3 System. I have gone through the pre-requisites mentioned at
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
One of the OSS notes 672745 in the above pre-requisites talks about applying basis component patch SAPKB46C46. Our current R/3 System is on the basis patch SAPKB46C39. Is there a way to import just the required function modules without applying the whole patch so that we can
continue with the projet ?
cheers.
Ramesh Babu<i>There is no SM59 RFC destination involved.</i>
Go to SM59 of the XI box and check, the R/3 system for which XI is having RFC destinations.
And before importing, hope you have given R/3 system IP address, client , user id and Password correctly in the Software componenet version.
<i>Is there a workaround for this?. I remember reading in this forum, that there are other ways of importing IDOC message and interface objects as XSD files directly instead of using import wizard.</i>
>> For this you need to download the Idoc Schema from the R/3 system and then import this schema in the External Definition as a xsd type.
But you need to connect to R/3 system and import the Idoc, Because in the directory, you are going to use Idoc itself as an Message Interface. So the xsd used for changing the occurence of the Idoc type, so that you can post mulitiple idocs.
Hope this helps,
Regards,
Moorthy -
Error when importing IDOC structure from SAP - Control record missing
Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, DuncanHi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan -
How we can import an IDOC structure from one SAP system to another w/o ALE
Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samsonhi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful). -
How we can import an IDOC structure from one SAP system to another
Hi Gurus,
How we can import an IDOC structure from one SAP system to another? If we're using ALE, how can we do that? Please can someone give me the process and necessary t codes.
Any response will be awarded!
Thanks a lot.
Samsonhi!
Define the logical system names in both the systems.
Logical system names :SAP001
SAP002
SAP001 FOR 001 CLIENT
SAP002 FOR 002 CLIENT
These two logical system definitions should be present in both the systems.
Assign the logical systems to the client. (in both the systems)
Assign SAP001 to 001 CLIENT
Assign SAP002 to 002 CLIENT
you can See these in transaction SALE.
After this define the rfc DESTINATION IN sm59. (in both the systems)
In 001 client create the RFC destination name SAP002
In the tab log on security, give the user name and password and client of the 002 client and save it.
Similarly do the reverse in the 002 Client.
In 001 client create the port.(Transaction WE21)
Specify the RFC destination name as SAP002.
Now you can define the ports, (both the systems)
Create the partner profile for partner(ie gve logical system name of partner) , so give as SAP002.
partner profile in both the systems.
Now create the distribution model in BD64 and goto edit>model view>distribute.
The same model view will be visible n distributed to the partner system also..which in this case is sap002.
U may trigger the idoc from we19 and chk its status in we05.
Please let me know if you need further info on this. -
IDOC settings from sap r/3 to sap pi7.3
Hi Guru,
actual problem when i am triggering the idoc from ERP,it is trigeering to the abap stack in sap pi.but i am using idoc_aae adapter at sender side,the message is flowing from sap ERP to file but the message is seen in sxmb_moni,but actually it is not seen in moni .
Please if any one have the idoc setting from sap erp to sap pi7.3. and iam using ICO configuration.
Please help me
Regards
ReddyHi,
Please go through the below link :
http://wiki.sdn.sap.com/wiki/display/XI/ALE-Idocconfiguration-+%28R3XIFile%29
Also in your software component version please check whether import of IDocs and RFCs are allowed
from your respective ECC system, and check the ECC system parameters are correctlt maintained or not.
Try out once. -
Import from a sample.DMP file
when import from a dump file an error occurs>>>>>>
Export file created by export:v10.01.00 via conventional path
IMP-00013: only a DBA can import a file exported by another DBA
IMP-00000: Import terminated unsuccessfully.
What can i do .... help meee??????
\Login with a user that has the DBA role...(or SYS or SYSTEM)
-
Hi,
I have two queries.
1.I need to import idoc structure from excel file not from sap, is it possible ?
2 what are the detalied steps to implement following SAP note for getting processed file name at runtime.
Thanks & Regards
Tuhin
Symptom
You want to access the name of a file sent through a File Adapter Sender channel from a custom developed XI module.
Other terms
XI 3.0, XI30, File Adapter, Module Processor, Module Development, Modules
Reason and Prerequisites
The functionality described in this note requires SP 9 or higher of the component XI ADAPTER FRAMEWORK CORE 3.0.
Solution
The File Adapter passes the name of the processed file to the module processor. This information is available in a Hashtable object accessible as as supplemental module data under the name "module.parameters" within the module's 'process' method.
For further information, please take a look at the example code below:
public ModuleData process(ModuleContext mc, ModuleData md) throws
ModuleException
Hashtable mp = (Hashtable)
md.getSupplementalData("module.parameters");
String fileName = null;
if (mp != null)
fileName = (String) mp.get("FileName");Hi Tuhin,
<i>
1. .I need to import idoc structure from excel file not from sap, is it possible ?</i>
Yes and No; If the structure in the Excel sheet is defined in XSD format (XML schema) then it should be possible to import it assuming you are using XI 3.0. In 2.0 this is not possible.
Not sure if in XI 3.0 you are allowed to import Excel files straight forward into XI.
<i>2 what are the detalied steps to implement following SAP note for getting processed file name at runtime.</i>
I'm not quite sure but this looks to me like you have to implement this within a Java custom function/mapping...
The data (in this case the filename) is encapsulated in a Hashtable object available during runtime.
Cheers,
Rob. -
Getting valid idoc number from the sales document
hi,
Iam sending the code for getting the idoc number from sales document.
but iam not getting the result.
please see the code and correct the code so that i will get the idoc number from the sales document.
tables edid4.
data l_docnum like edid4-docnum.
parameters:p_vbeln like vbak-vbeln.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
IMPORTING
OUTPUT = p_vbeln
select single docnum from edid4 into l_docnum where sdata like '&p_vbeln&'.
if sy-subrc = 0.
write edid4-docnum.
else.
write ' the record is not found'.
endif.
it is very urgent..............
thanks in advance......See the below code :
report zxyz.
tables edid4.
data l_docnum like edid4-docnum.
parameters:p_vbeln like vbak-vbeln.
<b>data sdata like edid4-sdata.</b>
start-of-selection.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
IMPORTING
OUTPUT = p_vbeln
<b>concatenate '%' p_vbeln '%' into sdata.</b>
select single docnum from edid4 into l_docnum
where sdata like <b>sdata.</b>
if sy-subrc = 0.
write edid4-docnum.
else.
write ' the record is not found'.
endif.
Thanks
Seshu -
Hi,
IDOC with same basic type will overwrite with each other when we import from SAP to XI?
Eventh the extension type and Idoc type are different.>
Naresh Dasika wrote:
> ZZIFS_OILDEB_ABC.OILDEB06.ZABC_OILDEB06
> ZZIFS_OILDEB.OILDEB06.ZZIFS_OILDEB06
>
> Any chance of overwriting each other in the above?
NO
Maybe you are looking for
-
How do i link my existing itunes library to my new ipad
how do ilink my old itunes library to my new ipad air
-
It seems ever since I downloaded FF 13.0.1 I've been having problems with FB. When I use IE, everything works fine, though (however, I prefer FF to IE) -- NONE of these are issues on IE. When I try to click on a photo notification from FB it no longe
-
Query using SDO in JDeveloper - NullPointer
I have this java lines for query: DocsOddcModuleServiceImpl docs = new DocsOddcModuleServiceImpl(); FindCriteria findCriteria = new FindCriteriaImpl(); FindControl findControl = new FindControlImpl(); DocsOddcVOSDOResult result = docs.findDocsOddcVO1
-
List all UME actions of all Roles
HI all, I need to list all the UME actions associated to all roles. I couldn't find any API suitable for this requirement. Can some one help me on this. ? Thanks,
-
Release strategy not trigerred if PR changed after Approval
Dear Gurus, I have a requirement kindly help. We have a PR generated from PS module, This PR is released by the approver. After the Approval, PS user change the PR qty and value has been increased. Now my client wants that this PR should be again s