IDOC in status 2
Hi,
I am trying to post an IDOC through R/3 to XI system which finally converts into a file and goes to 3rd party.
When I am posting IDOC in R/3 I am getting 02 status and error as: Communication error when sending with HTTP and Status as Error Passing data to Port.
Your Help required to resolve this issue.
SJ
Hi Jain.
The configuration you have done incorrectly i guess...
check below link
http://help.sap.com/saphelp_sm40/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
Raj
Similar Messages
-
IP Job in BW finished, but how can I check the IDoc receive status in BW ?
Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks, -
How to cancel an idoc in status 64
How to cancel an idoc in status 64
Hi Manju,
If you have table updation access then
Go to SE16 --> Table EDIDC --> Give your "IDoc number" --> change the status from 64 to "73 IDoc archived".
Or you can ask to your ABAPer to do that.
Hope it helps,
Regards,
MT -
STPPOD Idoc creation status : Error in ALE Service
Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text: IDoc: 0000000000211243 Status: Error in ALE service
T100 Text: Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role Basic Type Receiver Port Application Output Mode
LS DELVRY03 A000000018 (XI port) GRN Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan KeshwaniNikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani -
SAP IDOC shows status 03, but no file is written
We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
Can you some please share your insights on how to resolve this issue?
Thanks in advance
SatishRFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model in sender system.
Partner profiles maintained in both the systems, soure Outbound properties
Target Inbound properties.
if you have two clients in system it will be easily you can check. -
5 IDOC with status 29 Error in ALE service
hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
rajuHi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards. -
Idoc- can we sent already sended idoc if status is showing error message
hi
Idoc- can we sent already sended idoc if status is showing error message
without making any changes.
Thanks in advance.Hi raja,
IN BD87.
give the idoc number,its status,messagetype and partner system and resend it.
Regards,
nagaraj -
Query on IDOC Ack (STATUS) config in XI for a specific partner comm.
Hi Experts,
Is it possible to configure the IDOC Ack (STATUS.SYSTAT01 message) in XI for a specific partner communication? We want to configure our system like ALEAUD but the message type should be STATUS.SYSTAT01 and the acknowledgment should be send to sender system for a specific partner only if XI receives any IDOC like (Orders) from that specific partner. For other partners (same sender system) we donu2019t want this acknowledgment settings and configuration. If possible please provide the configuration filters steps etc. Thanks for your valuable inputs in advance.
Thanks,
Satish
Edited by: Satish Jaiswal on Jan 8, 2009 2:55 AMHi Husain,
I have the document you have mentioned. Please note my requirement is to filter the Ack while creating and sending to R/3 based on Partner and Message type. The document provides info only on Message type filter but not parner specific for same sender system!!! Any help appreciated. Also note: BPM and Alert is out of scope.
Looking for some ALE configuration tricks to achieve this.
Thanks
satish
Edited by: Satish Jaiswal on Jan 9, 2009 2:40 AM -
Search idocs using status message EDIDS
Hi,
Is it possible to find out the idocs using status message?
For example, I need the idocs example in test system which has error message "Vendor & is not defined in company code &"
How to search idocs using error message?
Thanks for your help.
Regards,
YogitaHello Yogita
You have to select within table EDIDS directly:
Example:
STATXT = Item &: Only &2 &3 from material &4 are available
STAPA1 = syst-MSGV1
STAPA2 = syst-MSGV2
STAPA3 = syst-MSGV3
STAPA4 = syst-MSGV4
STATYP = syst-msgty (E, W, I, S, A)
STAMID = syst-msgid
STAMNO = syst-msgno
Regards
Uwe -
IDOC Ack status back to XI/BPM ?
Hi
i have done File to Idoc scenario, and want to get acknowledgemnents inside XI/BPM.
i hv proivded port,client,message type and selected 'Request acknowledgement' tab and executed report 'IDX_NOALE'. but im not getting any acknowledgement status in moni. please suggest hw could i get Idoc acknowledgements in XI.
1.Do i need to import ALEAUD Idoc into XI ? and Is any configuration required in ID for ALEAUD?
2.Is it possible to map Idoc status back into BPM? if yes, please explain how BPM should design?
3.once Idoc ack status received inside XI, is it possible to send same status to the back end sender system?
appreciate your help..
Regards,
Rajeshhi
1.Do i need to import ALEAUD Idoc into XI ? and Is any configuration required in ID for ALEAUD?
By default, audit idocs will come and get tagged to the IDoc. If you want to send it to the file system, all configurations must be done for IDoc to file scenario for the audit IDoc.
2.Is it possible to map Idoc status back into BPM? if yes, please explain how BPM should design?
Yes, it can be done. But won't be reqd in ur case.
3.once Idoc ack status received inside XI, is it possible to send same status to the back end sender system?
Yes, Q1
Check this document on handling IDOC acknowledgements.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
rgds,
Arun -
Hello All,
I have got one issue in outbound IDoc scenario. ( Basic type is ORDERS02 ). The IDoc failure status shown in WE02 as 26 (Error during syntax change of IDoc outbound). To solve this I am trying to Repeat Output through VA02 ( as this is related to salesorder) , it does not give the same error status 26 . Rather it gives status as 30 i.e. IDoc Ready for dispatch which I then process through BD87 gives status 03 i.e. Data passed to port OK .
I repeted this for 4-5 times, everytime I do not get any error status (as that was occured at the very first time) .
Kindly suggest what should be done to overcome this.
Thanks in anticipation...Hi Ubhaka,
In that case you should check the segments associated with the message type.Also, check the partner profile settings.
At first (when you got the error) what was IDOC generation method - was it through VA02 or some custom/standard program? If the methods were different for generating Idocs then check the program.
Hope that helps!
Regards,
Saba -
Idoc at status 51, however outbound delivery created
Hi Gurus,
We have peculiar issue , where in outbound delivery is getting created through IDoc. The inbound idoc has status 51 however delivery got created. Any idea how is it possible?.
Thanks in advance.Dear Math,
Have you got the solution for the above. If you get can you tell me please because even i got the same error message while processing the IDOC
status 51 after status 53. Outbound delivery is updated but not the sales order.
can you please help me -
How to Reprocess Outbound Idocs in Status 02 (Errors)
Hi,
I have an urgent problem. How do I re-process an Outbound IDoc in Status '02' (Error Passing Data to Port)
I have tried reprocessing this IDoc through BD87 using both the options Edit>Process and Edit>Restrict and Process, but it doesn't work
Please help as we are migrating cutover data from SAP to another system
Regards,
AdityaWorth to have a look at this thread
Error handling problem with outbound idoc status 02 and XML HTTP Port
Regards
Vivek
Reward points for all the useful answers -
Report RBDAPP01 not processing IDocs in status 51
Hello guys,
I have a problem with the execution of some Inbound Idocs using program RBDAPP01.
Now the Idoc is executed in background with a job. Sometimes we have some locks because we receive idocs going to the same order, and then remain in status 51.
In the variant of the job we filled to execute Idocs with status 64 and 51, but the idocs that remain in status 51 are not processed, at the end we have to do it manually.
There is no parallel processo to avoid the locks.
Do you know how we can solve it?
Many thans in advance.
Regards,
Xavi.i do have the same problem. is there an solution to this?
-
Outbound Idoc 03 status - SM58 error
Hi ,
For Oubound Idoc, I am getting Idoc with status 03 but is not there in Receipient system.
When I check Idoc in Sm58, Idoc has error <b>"The ABAP/4 Open SQL array insert results in duplicate database records".</b>
Can anybody help me how to solve this issue?
Thanks & regards,
Yogitause FM idoc_status_write_to_database to change the IDoc status from 03 to 30 and then run WE14 or RSEOUT00 to change the status back to 03
resending idoc from status 03 ...is a data duplicatino issue on receiving side...why do u need to do that ?
Use WE19 tcode to debug
In we19
1)U can choose your Idoc number in existing Idoc textbox
2)Press execute
3)u will display ur Idoc struct
4)Dbl click on any field then u can modify its content
5)PressStd Outbound Processing Btn to process modified Idoc
Thats it -
Hi there,
is there a report/programm to resend IDocs of status 03 (or any other status). I know there is report RSARFCEX to resend IDocs after tRFC errors. But is there any way to send them in any case?
Regardssorry, wrong forum
Maybe you are looking for
-
Cannot send mail from my POP account
I have a IPod Touch with the latest software installed (I believe that is 3.1.3). I have 2 email accounts which I use, a MobileMe account which I am not having any problems with, but my POP account is having problems sending emails. I can receive ema
-
How to download internal table data to excel in WebUI
Hi everyone, I am trying to download the contents of an internal table to excel in CRM Web UI. One way, would be to create a table view and use the export to excel button. However, wish to avoid this and directly download using code. Also tried conve
-
Paste function no longer works for me.
I have only noticed in the past couple of days that the 'paste' function when I right-click no longer works, it's greyed out. I can copy no problem but when it comes to pasting it, I can't get it to work. I have tried 'ctrl+v', that doesn't work for
-
BOM review is possible in SAP or not
Hi pp gurus, I have one scenario in which the client want to restict using the BOM for the next month but again want to use it in the following months. Is it possible to restict the usage. Thanks in advance
-
i've been having a problem of late with my iPhone 5s 16 GB. I have been receiving a warning box, advising me that my memory is low; problem is, no matter how many apps I delete, I'm still advised that I have no memory available despite the fact that