Idoc inbound error status code 56

Hi,
   when i am sending custom idoc from source system to destination , idoc sent successfully from source system .But in the receiver system idoc status code is 56 ( idoc with errors added) .
partner profile also available in the receiver system. How to solve the error.can any one pls give me the solution.
                                                                                Regards,
                                                                                Suhash.

Hi,
Check this link..[IDOC Status code 56 !! |IDOC Status code 56 !!]
[Re: Status 56 - IDOC with errors added |Status 56 - IDOC with errors added]
Edited by: Avinash Kodarapu on Mar 19, 2009 4:55 PM

Similar Messages

IDOC INBOUND ERROR ( STATUS - 51 )

hi all,
when procssing the inbound idoc's i am getting an error ststing that " No status record was passed to ALE by the application " what may be the problem .
helpfull answers will be rewarded with points.
regards,
murali.

See the code in this function module IDOC_INPUT_CLOSE. I think, even though you are writing the status records to the database, you need to send a status back to XI(ALE) with your status record. That is why I think you are getting this message.
In WE02, what do you see as status records for 1)original IDOC and 2) your new IDOCs?
Are you getting this message after you create the new IDOCs or before you split them? Can you tell us what is the logic of your function module(just design logic not the code)?
Regards,
Srinivas

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

AdControl error: HTTP error status code: NotFound (404)

For over a week now, a Silverlight WP 8 app with an AdControl configured for "test_client" continues to report this error and thus no bing ad visible either while running from an emulator (8.1 512) or from a WP 8 device. If I change the AdUnit
to use a PubCenter ID it works fine on the device and ads are displayed. The emulator connects to the Internet just fine via IE.
Could the ad server not be responding to the "test_client"?
Could someone let me know if it has worked recently for them? I tried contacting MS and no one seems to have an app configured with the test ad... I could give MS so many helpful suggestions. But looking at the hundreds of un-answered posts here - I
suppose they're busy with Windows 10...and have they asked developers if they're willing to put up everything on the cloud? all the while people still waiting to see the 'start' button on Windows 9?
here's the trace
Ad Err: NetworkConnectionFailure,Microsoft.Advertising.Shared.AdException: HTTP error status code: NotFound (404) ---> System.Net.WebException: The remote server returned an error: NotFound. ---> System.Net.WebException: The remote server returned
an error: NotFound.
   at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
   at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
   --- End of inner exception stack trace ---
   at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.Advertising.Shared.HttpRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.Advertising.Shared.WebRequestWrapper.WebRespCallback(IAsyncResult result)
   --- End of inner exception stack trace ---
I do love Windows - don't get me wrong - I'll check my 2nd dev system soon.

Hi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi.

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:     InPageError   Error Status Code:     c0000185   Faulting Media Type:     00000003   OS Version:     6.1.7601.2.1.0.768.3. Any clue why or how

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:
InPageError   Error Status Code:
c0000185   Faulting Media Type:
00000003   OS Version:
6.1.7601.2.1.0.768.3. Any clue why or how to fix?

InPageError
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards?

Inbound IDOC error - status code 52- application document not fully posted

Hi,
In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
Thanks in advance.
Regards,
Sri

HI
If you are FM to process the inbound IDOC,
possibilities are like below .
Reason 1 :
In partner profiles, check is it trigger immediately or not ? for particular partner profile which u r using .
reason 2 :
If you are using BDC code to update the data .if any screen contains error then also you will get the status in yellow .
reason 3 :
Have you tried with TCODE BD87 , might be it is processing error also .
i have worked on same probelm so if u r not solved with the issue after trying above 3 reasons .
reply me back .

Outbound IDoc Error: Status Code 37 'Sender Port' is invalid

Hi
I have an Error when the Outbound IDoc is triggered.
It shows that 'Sender Port in Control Record is invalid'.
Status Code: 37.
I know that there are some issues with the Sender Port Definition.
Please help me out to solve this problem using some checkpoints at each and every step.
Reward Points Assured.
Regards,
Baburaj

Hi Baburaj Manickam
Good
Follow this simple procedure
1) Send an outbound IDOC data(MATMAS) to a flat file on client1(SENDER).
- Create File Port (WE21) for outbound file.
- Maintain Distribution Model (BD64) for sender ->receiver system.
- Create Partner Profile (WE20) for logical system.
- You can use this program RBDSEMAT (t/code BD10) to generate IDoc MATMAS file(s).
_ Then you can FTP the file(s) to receiver system.
2) Upload the flat file as an IDOC on the inbound sytem
which is Client2(RECIEVER).
- Create File Port (WE21) for inbound file.
- Maintain Distribution Model (BD64) for receiver -> sender system.
- Create Partner Profile (WE20) for logical system.
- You can use this program RSEINB00 to upload IDoc MATMAS file(s).
INBOUND IDOC PROCESSING:
Firstly attach your idoc to a process code.
In the process cod you can tell the system that the specified program should be triggered whenever an idoc of that type comes to the system.
Then you want to have a Z-function module for your idoc processing, if I understand correctly.The steps should be:
1. Create a z function module for idoc inbound posting (copy from a function module idoc_input_*).
2. Set Function Modules as Inbound: - Transaction BD51
3. Assign Function Modules to Logical Messages and Idoc types:- Transaction WE57
4. Create process codes : Transaction WE42, and link the z-function module.
5. Create partner profile: transaction WE20 and attach the message type and process code.
6. In the Z- function module, extract data from the idoc segments, do whatever processing you want to do, and then call BAPI_CREATE_SALES_ORDER_FROMDAT2.
Try the Trasaction WE19 for testing your inbound and outbound IDOCs
Good Luck and Reward me for the same
Thanks
Ashok.N

Extended Idoc FIDCCP02 - getting status code 02

Hello Friends,
I am extending Idoc FIDCCP02 with an custom segment. I have followed this steps
Created Segment - Created Extended Idoc with Custom Segment created - Released both Segment and Idoc - Attached Idoc to FIDDC2 message type - Added message type to model view - maitained partner Profiles with extended idoc - created port type 'G' - Added necessary code in user exit (I am able to view data in my custom segment)
The Problem is - If I do not maintain Extended Idoc in partner profiles - I get Idoc XML created in external system with status code 03
But once I add extended idoc to the partner profiles - I get Status Code 02 with error saying Error in passing data to HTTP Port 500 internal Server error
Kindly can some body help me if I am missing some steps.
Thanks for help.

Dear Vasu,
I am creating Z message type, when I am creating that idoc (I have used XML Port) its initially comes in status 30 (IDoc ready for dispatch (ALE service)).
Now when I process this idoc with tcode WE19 then it give status 02 (Error passing data to port). Please suggest where i am doing mistake.
Your help will be appreciated.
Regards, Vicky M. Khambhati

No authorization for changing Customer Centrally- Idoc in Error Status 51

Hi Experts,
We are implementing MDM for one of the client.
The client runs a modification scenario in MDM for Customer Master.
He modifies a customer record in MDM and this record is transfered from MDM to ECC via PI through Idocs.
We are using standard Idocs for Customer Master which is DEBMDM
There are 2 Idoc's generated in ECC by PI from DEBMDM as DEBMAS and ADRMAS.
ADRMAS Idoc is succesfull in ECC and the corresponding record is modified.
Now the issue is that the corresponding DEBMAS Idoc goes into Error 51.
The Error details is as below:
                                                                                No authorization for changing vendor Centrally
Message no. F2326
System Response
You cannot access the requested data.
Procedure for System Administration
If necessary, include an entry in the user's authorization profile for
    the authorization object and parameters specified below.
Authorization object:
o   F_KNA1_APP
Parameters:
o   Activity: 02
    o   Application authorization : *
We gave the respective authorization object to the RFC User ID used in PI RFC created to connect to ECC.
Also we have given the user id Tcode authorization like XD01/02/03.
But this error still persists.
Request to throw some light on this.
Cheers
Dhwani

Check these threads
[Re: IDOC STATUS - 51 " IDOC HAS TEST STATUS|IDOC STATUS - 51 " IDOC HAS TEST STATUS";
[Error Inbound IDoc - Status 51|Error Inbound IDoc - Status 51;
thanks
G. Lakshmipathi

HRMD_A IDocs in Error Status 02

Dear SAP Peeps,
Upon generation of outbound HRMD_A idocs, an error occurs. Error status is "02 - Could not find code page for receiving system".
Can you guys assist me here? What does code page mean? How the error will be solve? The error occurs in every two weeks upon sending the idocs. Sending system is a unicode system while the receiving system is a non-unicode system.
Thanks!

i Think u have run some personnel acitons
than u need to check the table T529A and check have u assigned the feature which standrad in sap for certain acions
for Ex MSN20 MSN10 check these thr PE03
in IMg
check SEt up personnel Acitons

Error status code 400 with the description Message mapping failed

Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashit

hi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal

Cfsearch error: status code -1706

CF7.0.2 update level hf702-65114.jar (Standalone server on
Windows 2003)
Type: SearchEngine
Message: There was a problem executing the CFSearch tag with
the following collections.
Detail: Collection (status code): MyCollectionName (-1706)
Since re-creating a set of about 12 collections in a
different folder (same drive), I've been getting the above error
the first time CFSEARCH is invoked following an update of *any*
collection (not necessarily the one mentioned in the error.
Re-indexing or re-creating the named collection does *not* fix the
problem: CFSEARCH will continue to fail - so it's not corruption.
Re-starting the CF Search Service however does fix it... until the
next time one or more collections are updated.
I am now auto-restarting the CF Search Service using
cfexecute after each update but this is not ideal, and in fact just
now it seems to have had no effect: the tag has errored again
apparently in spite of the restart after the update.
I've searched for Verity status code 1706 but can find
nothing. Can anyone shed any light?

Sure:
1) Create a batch file (using Notepad but save file as
"restartCFsearch.bat") to restart the Windows service and make sure
the CF service account has execute permissions for it (if it's
running as local system then it will have)
NET STOP "ColdFusion MX 7 Search Server"
NET START "ColdFusion MX 7 Search Server"
2) Optionally create a function which executes the batch file
(or you could just put the cfexecute directly in the exception
handler, but creating a function will make it more re-usable):
<cffunction name="restartCFSearchService"
returntype="void" access="public" output="false">
<cfexecute name="[path to your batch file, eg:
D:\batch\restartCFsearch.bat]" timeout="30"></cfexecute>
</cffunction>
3) Wrap your cfsearch tag/function in a try/catch and test
for the error:
<cftry>
<cfsearch... >
<cfcatch type="SearchEngine">
<cfif findNoCase("There was a problem executing the
CFSearch tag",cfcatch.message)>
<cfset restartCFSearchService()>
<cfset sleep(3000)>
<cfsearch...>
<cfelse>
<cfrethrow>
</cfif>
</cfcatch>
</cftry>
To pause before re-issuing the search I'm using
http://www.cflib.org/udf.cfm/sleep
Hope that helps.

IDOC: Update ERROR status

Hi Experts !!!!!!
I am creating outbound IDOC for Informatica as middleware.
Once transaction is saved in SAP, customized workflow will start on a trigger event and create IDOC using MASTER_IDOC_DISTRIBUTE. Before calling MASTER_IDOC_DISTRIBUTE i am doing few mandatory field validations.
My requirement is to generated IDOC, even validation fails and set status to '26'. I also need to set customized message in error status mentioning why IDOC failed.
Can anyone suggest how to achieve this.
Regards,
Rushikesh

Hi,
Did you configure partner profile with appropriate information?
Thanks,
Ganga

Idoc Monitoring (Inbound & Outbound Status codes)

Hi ,
In a scenario...whr IDOC has to be send to XI to file.....
and idoc is sent to XI ...if an error occurs ...wht is the process to troubleshoot...wht r the various reasons codes ? in a reverse way ..an IDOC needs to send to R/3 and an error occurs..wht is the process to trouble shoot....pls give a brief note on various idoc status ???
Best Regards,
Kir@n ; )

Main Tools
XI Runtime Workbench
Transactions:
●     IDX1
●     IDX5
●     SXMB_MONI
●     SM58
●     SM21
Analysis
For an overview of analysis steps see a very good link to troubleshoot
[http://help.sap.com/saphelp_nw04/helpdata/en/05/d5fc3f8fc2c542e10000000a1550b0/frameset.htm]

Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

Idoc inbound error status code 56

Similar Messages

Maybe you are looking for