Idoc independent of Sender/receiver and Direction ??

Hi,
Can you please explain what is meant by the following statements?
a) Idoc is independent of sending and receiving system
b) Idoc is independent of direction of data exchange (Outbound and Inbound)
Regards,
Abhishek Jolly

Hi Abhishek,
I can understand why you are confused, I googled the same words as you did and found some links too :
example :
[http://www.sapmaterial.com/idocbasicsunderstanding.html] and it has some inconsistencies.
example at one place it says
IDOC documentation:
Idoc documentation can be seen in the transaction WE60.  go to transaction we60 and give some idoc , for example give
orders05
Clearly this is incorrect, if you goto transaction WE60, the frame title says " Documentation for IDoc type or segment type"
Further it says "Idoc is an instance of idoc type." which is correct.
Another site [http://www.slideshare.net/Naresh007/idoc-1089255] which is a powerpoint slide is utter nonsense.
The problem is that most of the times the term IDoc type is referred as IDoc and therefore it is bound to create confusion for the first time readers of this topic.
However, I didn't find any SAP help page which claims this statment and therefore the information given might not be 100% trusworthy.
The best place to start your search on any topic about SAP concepts is SAP's own documentation on [help.sap.com] which will have authentic information and will never mislead.
regards,
Advait

Similar Messages

  • Sms send receive and other basic phone functions

    How do send/receive SMS's on iPhone. Is there a "how-to" manual for the BASIC operation functions for day to day telephone use? Don't need pictures, music or computer ********, jst basic mobile phone use at this stage.

    See Here
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Lion Mail can't send/receive and requiring Force Quit.

    After Lion 10.7 , Mail Version 5.0 (1244.2/1244.3) can't send or receive (to smtp or pop servers) as usual with Snow Leopard. In addiction, Mail seems hanged and is not quitting graciously... requiring Force Quit.
    Today I noted a lot of users reporting Mail problems after Lion, and Apple site says there was only a minor changes at Mail authentication methods. I tried everything they said... and everything communities said. Nothing works. 
    Is Apple really working on Mail reported problems ?

    I get emails with my sbcglobal and ymail but i cannot send any email!! this is getting very annoying.  It used to work just fine on snow leopard. I even tried using the same setup that I have on my iPhone, same smtp etc and nothing seems to work...

  • Sending, receiving and opening e-mail in Pagemaker 6.5?

    I am currently having trouble sending e-mail in Pagemaker 6.5.
    I send it to its destination, however it arrives in a different format that can't be opened. I
    Is there anybody out there who can help me? What do I need to be doing?
    I can't understand sending it in the proper format only to have it arrive in something else.
    Help...... FAST..............

    If you are certain the other person is also using Pagemaker 6.5, my suggestion is to compress it in a common format for compression before e-mailing it. Data sent over the internet in its own raw format instead of an encoded file format that is supported by most people can sometimes get corrupted. Check with the person you are sending to what operating system they have, and which compressed formats they can open. http://www.maczipit.com/ for instance supports Winzip/PKZip compression. Control-mouse selecting Archive in 10.3 supports GnuZip (Gzip) and in 10.4 supports Winzip/PKZip compression. If the other person has an older Mac, they may only have Stuffit compression support, for which you'd need http://www.allume.com/ 's DropStuff or Stuffit Deluxe.

  • IDOC Sender Adapter and Receiver Adapter

    Hi,
    Why we don't require IDOC Sender Adapter to communicate with PI and why IDOC Receiver Adapter is required to communicate with SAP ?
    Regards,
    J Augastine

    Hi,
    >>>Why we don't require IDOC Sender Adapter to communicate with PI
    you're talking about sender and receiver agreements right ?
    as this adapter is based on abap stack - with new functionalities of IDOC adapter
    require sender agreement
    >>>and why IDOC Receiver Adapter is required to communicate with SAP ?
    as we need to put the RFC to the destination system somewhere...
    Regards,
    Michal Krawczyk

  • How does B2B in SOA SUite 11g identify sender/receiver of inbound document?

    Hi All,
    I am checking basic B2B features - custom document protocol. I have defined docuement definition, trading partner, agreement, channels as per guide. When I copy (manually) a sample xml payload (complaint to definition xsd and identification expression), it gives error as the sender could not be identified (receiver is taken as the host as I am putting the file over host's listening channel).
    So question is - how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?
    Thanks in advance.
    regards, sibendu

    Hi Sibendu,
    First of all, let me direct you to the right forum, Oracle Integration B2B forum - Integration - B2B
    Now coming to your question,
    how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?For each and every document, exchange and transport protocol there are certain fields (generally message headers) on the basis of which B2B identifies the sender and receiver. As far as identifying the incoming message payload is concerned, in each and every document definition we define some UNIQUE selection criteria to identify a document. For XML documents, it is the X-Path of some node(and/or it's value) and for non-xml documents, it is the start and end position of some element (and/or it's value) in the document.
    You may get faster and better answer in Oracle B2B forum, for the questions related to Oracle B2B (10g/11g).
    Regards,
    Anuj

  • Help with iPad Identifying Phone Numbers in iMessage Send & Receive Settings / iMessage Syncing Help - iOS 6 - iPhone - iPad

    With iOS6, iPhone and iPad users will see that their Send & Receive iMessage settings have updated across their devices to be made available at both phone numbers and email addresses. You may have also seen alerts on one or more of your devices advising that another device is now using the same Apple ID/phone number for iMessage.
    Being able to be reached on iMessage on both Apple ID and phone numbers across devices means that iMessage can keep the same thread and sync across devices.
    Due to having 2 iPhones on different phone numbers running along side my iPad at one time, (whilst I was waiting for my phone number to be moved to a new provider), my iMessage settings on my iPad lost my phone number completely. I thought I would document the steps to recover this for anyone in the same boat.
    1. Check that you are signed in with the same iCloud Account on both iPad and iPhone.
    2. Turn off iMessage on your iPad from Settings > Messages.
    3. On your iPhone, go to Settings > Messages > Send & Receive. You should see your phone number and your iCloud email address in the 'Your can be reached by iMessage at:' list. Make sure both are ticked.
    4. At this point, I synced my iPhone with iTunes, then synced my iPad with iTunes.
    5. On your iPad, turn iMessage back on - your phone number should now show in the 'You can be reached by iMessage at:' list. Tick the phone number. You should receive an alert on your iPhone.
    This should resolve the issue.
    With the above set up and with the iOS 6 updates, iMessage should now sync fine across devices however I have still found the most successful way to run iMessage is to always start new conversations from your Apple ID and to start new threads by addressing the first message to an Apple ID from an Apple ID.
    To do this, go to Settings > iMessage > Send & Receive and tick your Apple ID in the 'Start new conversations from:' list, then start a new iMessage thread to the recipients Apple ID. This way, the thread will sync across iPad and iPhone. Note that a thread set up this way will not fall back on SMS, so you get a clean iMessage thread. This method also worked/works on iOS 5, as long as you send the first message of a new thread from an iPad (which can only send via Apple ID) to an Apple ID.
    Hopefully this helped someone!

    ipad has no phone number, you use a same email address for both devices. and set it in Settings>Messages>Send & Receive

  • Haven't been able to send/receive iMessages since upgrading from 4s to 6 plus

    I bought iphone 6 plus 64G to upgrade from my iPhone 4S. I have not been able to send or receive iMessages to iPhone users in my contacts with my cell number. It always uses my email when I create a new iMessage and is able to send that way. I cannot receive iMessages from iPhones to my cell number. which is a huge problem. I have tried turning iMessages on and off and resetting my network and nothing seems to be working. How can I resolve the problem?

    If you turn iMessage off and on, does it activate? If not, then see this troubleshooting support document. If you have difficulty activating FaceTime or iMessage - Apple Support
    If it does activate, the go to Send & Receive and see if your phone number is listed there. It should be grayed out and checked.

  • Imessages not sending/ receiving.  All texts made to other iphone users produce an error message where it shows as it was unable to deliver, however, the messages go through, but error still comes up after each imessage sent.  this does this for each text

    I have the Iphone 5S.  Over the last few days, I continually get mail delivery errors when imessages are sent to any contacts who have iphones.  I have spoken to my friends/ family who are also on the receiving/ sending end of my messages.  They also say that they are receiving an error/ mail delivery error when they send imessages to my phone.  Text messages are working fine (with other phones that are not iphones) and no delivery errors come up.  However, it is just with me sending or receiving imessages.  I have gone in to settings> messages> send & receive and all my information is right.  I have also attempted to cut the phone off and back on (hard reset as well) and this has not fixed the problem.  I then explored to see if my software was out of date, however, i have the most up to date software for the iphone 5 S.  Does anyone know of a way to fix this problem, as it is annoying to both me and anyone else who has an iphone that sends me a text/ imessage as it will *alert* that there was a delivery failure.
    Please help!!

    There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems.    It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
    Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

  • Question about send/receive data in as3

    hello
    i want to ask : how can i send data from flash to php using as3 and receive data from php using flash .
    and another question : how can i upload files using as3 .
    thank you .

    Look into URLLoader documentation for sending/receiving and FileReference for uploading:
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/URLLoader.html
    http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/FileReference.html

  • Problems with send receive Email ( Adobe Interactive)

    I have heard the E-Learning(Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
    ) about this topic on this webpage but i still have to many problems. Can somebody give me a source code, that i know how this works. Or is there a source code anywhere in the sap?
    I hope anybody can help me, Thanks!

    Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
    lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'.   " Empfänger Receiver
    lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
    But it doens`t send the email.
    Can anybody help me please???
    Kevin
    Here my Code:
          Report FP_EXAMPLE_01
          Printing of documents using PDF based forms
    REPORT z_example_02.
    Data declaration
    DATA: carr_id TYPE sbook-carrid,
          customer          TYPE scustom,
          bookings          TYPE ty_bookings,
          connections       TYPE ty_connections,
          fm_name           TYPE rs38l_fnam,
          fp_docparams      TYPE sfpdocparams,
          fp_outputparams   TYPE sfpoutputparams,
          error_string      TYPE string,
          l_booking         TYPE sbook,
          t_sums            TYPE TABLE OF sbook,
          l_sums            LIKE LINE OF t_sums,
          fp_formoutput     TYPE fpformoutput.
    PARAMETER:      p_custid TYPE scustom-id DEFAULT 38.
    SELECT-OPTIONS: s_carrid FOR carr_id     DEFAULT 'AA' TO 'ZZ'.
    PARAMETER:      p_form   TYPE tdsfname   DEFAULT 'FP_EXAMPLE_01'.
    PARAMETER:      language    TYPE sfpdocparams-langu   DEFAULT 'E'.
    PARAMETER:      country  TYPE sfpdocparams-country DEFAULT 'US'.
    Get data from the following tables: scustom(Flight customer)
                                        sbook  (Single flight reservation)
                                        spfli  (Flight plan)
    SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
    CHECK sy-subrc = 0.
    SELECT * FROM sbook INTO TABLE bookings
             WHERE customid = p_custid
             AND   carrid   IN s_carrid
             ORDER BY PRIMARY KEY.
    SELECT * FROM spfli INTO TABLE connections
             FOR ALL ENTRIES IN bookings
             WHERE carrid = bookings-carrid
             AND   connid = bookings-connid
             ORDER BY PRIMARY KEY.
    Print data:
    First get name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
      EXPORTING
        i_name     = p_form
      IMPORTING
        e_funcname = fm_name.
    IF sy-subrc <> 0.
      MESSAGE e001(fp_example).
    ENDIF.
    Set output parameters and open spool job
    fp_outputparams-nodialog = 'X'.    " suppress printer dialog popup
    fp_outputparams-getpdf  = 'X'.    " launch print preview
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams = fp_outputparams
      EXCEPTIONS
        cancel          = 1
        usage_error     = 2
        system_error    = 3
        internal_error  = 4
        OTHERS          = 5.
    Set form language and country (->form locale)
    fp_docparams-langu   = language.
    fp_docparams-country = country.
    *fp_docparams-fillable = 'X'.
    *fp_docparams-langu   = 'E'.  "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
    *fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
    currency key dependant summing
    LOOP AT bookings INTO l_booking.
      l_sums-forcuram  = l_booking-forcuram.
      l_sums-forcurkey = l_booking-forcurkey.
      COLLECT l_sums INTO t_sums.
    ENDLOOP.
    Now call the generated function module
    CALL FUNCTION fm_name
      EXPORTING
        /1bcdwb/docparams  = fp_docparams
        customer           = customer
        bookings           = bookings
        connections        = connections
        t_sums             = t_sums
      IMPORTING
        /1bcdwb/formoutput = fp_formoutput
      EXCEPTIONS
        usage_error        = 1
        system_error       = 2
        internal_error     = 3
        OTHERS             = 4.
    IF sy-subrc <> 0.
      CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
        IMPORTING
          e_adserrstr = error_string.
      IF NOT error_string IS INITIAL.
        we received a detailed error description
        WRITE:/ error_string.
        EXIT.
      ELSE.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDIF.
    Close spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
      EXCEPTIONS
        usage_error    = 1
        system_error   = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *********************Send the form*******************
    *********************to the Customer*****************
    *********************via Email***********************
    *IF i_down = abap_true.
    DATA: filename TYPE string,
            path TYPE string,
            fullpath TYPE string,
            default_extension TYPE string VALUE 'PDF'.
    Data:
    lt_att_content_hex TYPE solix_tab.
    *DATA: data_tab TYPE TABLE OF x255.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer     = fp_formoutput-pdf
      TABLES
        binary_tab = lt_att_content_hex.
    CLASS cl_bcs DEFINITION LOAD.
    DATA:
    lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
    lo_send_request = cl_bcs=>create_persistent( ).
    DATA:
    lt_message_body TYPE bcsy_text VALUE IS INITIAL.
    DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
    APPEND 'Dear Vendor,' TO lt_message_body.
    APPEND ' ' TO lt_message_body.
    APPEND 'Please fill the attached form and send it back to us.'
    TO lt_message_body.
    APPEND ' ' TO lt_message_body.
    APPEND 'Thank You,' TO lt_message_body.
    lo_document = cl_document_bcs=>create_document(
    i_type = 'RAW'
    i_text = lt_message_body
    i_subject = 'Vendor Payment Form' ).
    DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
    TRY.
        lo_document->add_attachment(
        EXPORTING
        i_attachment_type = 'PDF'
        i_attachment_subject = 'Vendor Payment Form'
        i_att_content_hex = lt_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
    ENDTRY.
    lo_send_request->set_document( lo_document ).
    DATA:
    lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
    lo_send TYPE adr6-smtp_addr VALUE '[email protected]'.   "Absender SENDER
    lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
    Set sender
    lo_send_request->set_sender(
    EXPORTING
    i_sender = lo_sender ).
    Create recipient
    DATA:
    lo_recipient type ref to if_recipient_bcs value is initial.
    Data:
    lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
    lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
    *lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
    Set recipient
    lo_send_request->add_recipient(
    EXPORTING
    i_recipient = lo_recipient
    i_express = 'X' ).
    *lo_send_request->add_recipient(
    *EXPORTING
    *i_recipient = lo_recipient
    *i_express = 'X' ).
    Send email
    DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
    lo_send_request->send(
    EXPORTING
    i_with_error_screen = 'X'
    RECEIVING
    result = lv_sent_to_all ).
    COMMIT WORK.
    MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'.

  • IMessage not sending, receiving or synching with iOS 6 devices

    Yesterday iMessage on Mac (runing ML 10.8.2) stopped being able to send, received and synch.  Seems to have coincided with changing of passwords, which I believe all devices (iMac, iPhone and iPad) are using the same password.  Has anyone has a similar experience where Messages was working but then stopped.  It is still working on iPhone but is not updating the iPad or iMac. Similary, when I send a Message on the iPad neither the iPhone nor the iMac are updated.

    iMessage has stopped on my iMac - ML OS has played up twice in the past week. Reboot etc doesnt solve it. It works fine on iPhone 5 and iPad 2 but will not open on iMac. Error message 994 bad access etc and keeps quitting and message box say  it is inactive. When I got to preferences it Quits! All messages have disappeared aswell. Any ideas? It will cost me £35 to call apple to get the answer( as the iMac is outta warranty but only 4 years old). Help?

  • N97 mini Email Send receive Issues

    hey, got a new N97 Mini
    I set up emails, the sync sometimes works recently I click Send Receive and it does nothing.
    I sent a test email to my account and it is not showing up
    I have it set up to sync every 15 minutes, all day
    Current Connection Info is
    Connection mode: offline mode
    Connection Status: Connection inactive
    Last sync: 8/4/2010 8.59 (it is now 14.02)
    The sync was successful
    Access Point is set to "internet"
    My internet settings are
    1: Home Wireless
    2: Work Wireless (I am at work)
    3: Contract WAP
    I tried changing the priority so the Contract WAP is first and nothing.
    Any suggestions?
    Solved!
    Go to Solution.

    Fixed it. Changed the connection type from Internet to WAP services

  • Troubble with outlook: Automatically Sending/receiving 600+ tasks

    Hello!
    A customer to me is having some troubble with outlook 2010 automatically sending/receiving...
    His outlook is set to automatically send and receive but the problem is that sometimes it performs over 600 tasks (see picture). this problem occurs a coupple of times per week and is quite frankly annoying. 
    The solutions i have tried so far are:
    Turn off all programs and restart the computer.
    Search the computer for virus/malware.
    Looked for a datafile that could possibly make this happen.
    Made sure that Cached exchange-mode is off.
    Asked him to replace his keyboard if that might be the issue. (not configrmed yet though)
    Create a new outlook profile.
    Regards,
    Joakim Alm

    Hi Joakim,
    Does it take long time to process Send/Receive in Outlook 2010? Please do the following changes:
    1. Check whether there is any Anti-virus in the machine scanning all incoming and\or outgoing mails. If it is, please disable it.
    2. Launch Outlook 2010 into safe mode, so that no COM Add-ins are loaded. And run Send/Receive and try to reproduce the behavior:
    Click Start | Run | On the Open: line type (without quotes) “Outlook.exe /safe” | Click OK\Enter
    3. If the issue continues in Outlook safe mode, please change a computer to configure the account to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Turning off "Sender/Receiver Photo" feature

    This November's update introduced a new feature called "Photos of Sender/Receiver", and I don't see any interface options to turn it off.
    http://blogs.technet.com/b/lync/archive/2013/11/12/november-2013-update-for-the-lync-2013-desktop-client.aspx
    Maybe I'm wrong, and there is some way to disable it? It totally bloats the IM window.

    Hi,
    The feature adds visual context to your IM conversations, particularly in conference scenarios where multiple people may be chatting at the same time. There is no option to disable it. You can try to submit a feedback to Microsoft. It is possible to have
    such a patch to meet your requirement in the future. Thank you for your understanding. NextHop is the Microsoft Lync Server team’s customer response channel. You can give us feedback or propose and article topic by email at
    [email protected]
    Kent Huang
    TechNet Community Support

Maybe you are looking for