IDOC_INPUT_DEBITOR not giving sucees Message

Hi ,
We are using FM 'IDOC_INPUT_DEBITOR' for posting customer. Inside this FM, SAP does Call Transaction XD01 and collects the messages in BDCMSGCOLL.
Our logic is based on the Success message that this FM generates and that found in this BDCMSGCOLL. Till few days it was working fine but now this FM is not returning any message even though the customer is getting created. I ran in the foreground / Error/background mode, but even though I found the customer in KNA1, this FM is not returning any Success message.
All Error & Information messages are coming but not the Success. Our further processing heavily depends on the message type and hence the problem.
We are on ERP 2004 and as told it was working fine few days back. I wanted to know what changes would have made the FM to behave like this. As there are many users for this System, I cant find who changed what. If some one has faced this issue or have some ides, pls guide me.
Thanks for listening.
Regds
Harish

Thanks Gareth for the reply. This is standard FM and after the Call transaction, SAP code reads the BDCMSGCOLL. If it does not found ans S in that, it fails the IDOC to 51 status. There is no Z code in this.
I would like to know what config changes can supress the success message . I tried doing BDC thoguth SM35 and there also found that no message is coming when the Customer is created. This would mean that there is something worng in srrting rather than FM and BDC which is causing the BDC failure in Std FM.
Regds
Harish

Similar Messages

Dynamic Credit Limit check not giving error message

Hi!
I have configured the credit management like below:
1. high risk, medium risk, low risk category.
2. credit control area with update : 00000012
3. In pricin procedure for net value, routine "A" is given.
4. In Item Category, Credit Active tick mark is checked.
3. Assigned D, credit group 01(Credit Group for Sales Order) in sales document types.
4. assigned credit group in Delivery document types.
5. configured automatic credit control;
for high risk, with credit group 01 , dynamic check with reaction D , and status/block tick by considering open order and open deliveries .
My main aim is when sale order is creating, system should give error message , when credit limit is exceeded.
But system is giving following information message only:
     Dynamic credit check: credit limit exceeded (data
     cannot be saved)
     250.00 USD
that is only information message and allowing to save the sael order and delivery also.
can any one give idea where config is missed.
we have activated FSCM also, but no link to credit control area.
regs,
ramesh

Hi,
Check up at message control with OBA5
Regards
VG

MessageContext.getMessage().toString() is not giving soap message

Hi,
I have implemented a handler for JAX-RPC web service on weblogic 10.3 and my code in handler is exactly same as below.
public boolean handleRequest(MessageContext context) {
SOAPMessageContext messageContext = (SOAPMessageContext) context;
System.out.println("** Request: "+messageContext.getMessage().toString());
log.info(messageContext.getMessage().toString());
return true;
and It is not printing complete SOAP message. Instead it is just printing something like .."weblogic.xml.saaj.SOAPMessageImpl@a050277". I feel this is some issue with classpath setting. can somebody please assist with this?

Hi,
Can you try using ByteArrayOutputStream to print soap message
here is the snippet of code
=================
SOAPMessage soapMessage = messageContext.getMessage()
dumpSOAPMessage(soapMessage);
============================
private void dumpSOAPMessage(SOAPMessage msg) {
if (msg == null) {
System.out.println("SOAP Message is null");
return;
System.out.println("");
System.out.println("--------------------");
System.out.println("DUMP OF SOAP MESSAGE");
System.out.println("--------------------");
try {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
msg.writeTo(baos);
System.out.println(baos.toString(getMessageEncoding(msg)));
// show included values
String values = msg.getSOAPBody().getTextContent();
System.out.println("Included values:" + values);
} catch (Exception e) {
e.printStackTrace();
Hope that helps
Regards,
sunil

I have a 16GB 3GS phone. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it.

I have a 16GB 3GS phone since about20 months now. For the last few days, my phone is constantly giving me message that the accessory attached to my phone is not optimized for this iphone. You may experience noise or poor communication, while there is no acessory attached to it. I always used standard headphones and charging cable. Now when i recall, it started at one of the sync sessions with my itunes. I have turned my phone off and aon again and again but the message keeps coming every one or two minutes.I have also started loosing voicce on different applications like youtube etc. Also the ringer volume up and down key does not show me the small boxes increasing or decreasing on screen. The phone is playing crazy. Can someone help please
Thanks
Zia

It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help

Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update.

Samsung note 3 is not giving audible alerts for all my text messages since the 4.4.4 update. I get an audible tone about 3/4 of the time. Thinking a conversation is over I come back 45 minutes later to find another text I didn't know came in. I've restarted my phone and checked my message settings. Any ideas? Factory reset is not an option!

I'd try going back into the Text Message settings. In Sound setting, work the setting from None to an alert. Then in Vibrate put a check in the box then uncheck. Just to see if that will free it up, could be a possible corruption with the new software update?

HT1483 my iPod is not responding. It is giving a message low battery, please wait and is displaying the apple support link

my ipod is not responding. It is giving a message pleases wait low battery and showing me a link to apple support

Hey,
Welcome to Apple Support Communities.
Well leave it for few minutes then try plugging it to the charger, if that does not work. Try restoring it from revious backup. This will change the software and hopefully earase the error. If that did not fix it i guess you need to take it to the Store for a check.
I really hope this helps you. Let me know if it does. If not feel free to give me a shout. Best of luck.

Adobe CC products either closes almost immediately after Startup or closes after giving the message "Could not validate license"

Okay, so I recently got all the products I wanted from CC via the student subscription. It was a bit of a pain getting everything working, as windows explorer crashed and reopened during installation of CC and during an update. Once I finally got in and got everything installed, I thought I was golden, it was then that I discovered my troubles had only just begun. Whenever I tried to open a program it either closed almost immediately after Startup or closed after giving the message "Could not validate license". Thus far I have not found a solution, as the much touted log out and log in method failed me.
Any help in this area would be greatly appreciated as I am honestly at a loss on what to do.
Technical details:
The programs I tried were After Effects, Audition, Photoshop and Premiere.
I am using Windows 7.

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I can not restore my ipad, its giving the message

I can not restore my ipad its giving the message : The Ipad could not be restored, an unknown error has occured (1)

Hi ..
Instructions for you here > iOS: Unable to update or restore

Indesign cc files not saving but not giving an error message

Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
Janine

Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Fennec 4.0b6pre installs but immediately closes giving this message on X10 mini pro 2.1 "fennec does not support this device and you may experince problems."

'''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''

https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds].

My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

Check this article: iOS: Third-party Bluetooth headsets, headphones, and keyboards
Unpairing a Bluetooth accessory from an iOS device
If you've paired your iOS device with a Bluetooth accessory and no longer wish to use that accessory, you may unpair it. If you wish to leave the device paired, but route calls through a second, paired device, turn off the first device and then turn on the second device. Then in Settings > General > Bluetooth, tap on the device you wish to use.
From the Home screen choose Settings > General > Bluetooth. If Bluetooth isn't on, turn it on.
Choose a device and tap Unpair.
Until you pair the Bluetooth accessory again, your iOS device won't route information through it.
* Find information on which iOS versions and devices support which Bluetooth profiles. Not all Bluetooth stereo headphones include a mic. Only those with a mic and that support handsfree profile (HFP 1.5) can be used to make and receive calls.

My iTunes purchases will not download to my iPad gen4. Keeps giving the message" download error tap to try again"

My iTunes purchases will not download to my iPad gen4. Keeps giving the message" download error tap to try again"

I have the same problem. Did you get yours resolved?

Output giving error message update was terminated

Dear All,
Question: Do we need to maintian the Logical destination(Printer name) for the output type which is created with Medium 5?
I have created the output type with transmission medium 5 communication strategy is maintained as CS01,its determining correctly in the docuemnt.
Now the issue
IF I open the sale order/Invoice and select the ouput (Which was determined with medium 5) click on communication method and I have not maintained any communication menthod(Printer name) because transmission medium is 5after saving and I am trying open the transaction SOST I am geeting popup with update termination error
Note: if I maintain printer name in communication method i am not getting any error message.
My question for transmission medium which is having communication stratege CS01 no need to mtaintain printer name, why I am getting this error.
Please check and help to solve this issue.
Thanks & Regards,
MK.

Dear Eduardo,
In SM13 I can see the error message TD 356(Maintain an output device in your user master record) then issue if we don't maintaint the logical destination (printer name), bu if give LOCL its not giving any error.
My question if the output type created with transmission medium 5 why we should givem the printer name?
Thanks & Regards,
MK

IDOC_INPUT_DEBITOR not giving sucees Message

Similar Messages

Maybe you are looking for