IDOC is not processing in R/3 with status 64(Urgent)--Production issue.

Dear Folks,
Here we are implementing MIRROR sytem for data extraction in to BIW.
I had gone through the steps in PDF file(How to minimize down thime for Delta Initialization) which has given by SAP.
These are following steps I had performed in BW production
1. Using RSADMIN transcation- Assigned one user as a Debugging user.
2. With the Debugging user Created one infopackage on Purhcasing ITM datasource--
 In data selection tab, I given date as from 2002 to 2003
 In Update tab, I selected update mode as Initialize Delta process- without data transfer and Uncheck Update Data in master system immediately
 In schedule tab I selected option Start Data load immediately then Start extraction.
3.Data was requested and It was intialized properly with green status 1 from 1 Records.
4. In details tab Request, Extraction, transfer(IDOC and TRFC), Processing everything in Green color.
5.As per document I have checked in R/3 for IDOC with status 64 using transaction BD87/WE05
Problem is that IDOC is not processing in R/3 system. for that IDOC I have checked in BW montior screen using the option IDOC list in Source sytem, here also it is not showing any IDOCs.
Please let me know why BW sytem is not sending any IDOCs to source sytem.Is there any settings I could have miss in BW aswell as in R/3 system.
Note: In BW production I successfully loaded master data from R/3. aswell as I triggered infopackage-Initialization with data transfer, it is showing IDOC number properly in R/3 system.
Points is Assured for all replies.

Hi,
- check you RFC destination (normal test + authorization test)
- Check you partner profiles in WE20 and its ports WE21
- from the source system tree (RSA13) right click your source system and perform a check
- the best is to restore your source R/3 source system from BW (right click on it ans select RESTORE); you'll need to be able to log in the source system as an admin as well as opening the source system for customizing in SCC4 so that BW can recreate the correct partner parameters automatically; the best is to do that with your basis group.
hope this helps,
Olivier.

Similar Messages

Idocs are not processed in the right order.

Hi,
I face a problem that when there are a large number of IDocs (Inbound) posted the Idocs are not processed in the right order.
Msg type: MBGMCR
any idea how this can happen?
what is the solution?
br
Karen

No answer

Printing Problem - the process "mdns" stopped unexpectedly with status 1

I have been trying to get my Epson Stylus rX620 to print wirelessly for a while. It actually worked once and printed two separate documents. Then however it decided not to work any longer and it seems that nothing I do changes it. The same error message appears each time in the print monitor:
the process "mdns" stopped unexpectedly with status 1
It has printed wirelessly with the same equipment. It is attached to an airport express that is linked to extend my wireless network from an Airport Extreme. It has no problem printing when the USB cable is plugged in directly. I have tried everthing that I can think of. Any ideas??

Hi John,
Okay, that was some new information...
Given that the hub is causing the problem then I would concentrate on testing it. Try connecting the Mac and the printer directly to the hub. Ensure the IP addresses of each device (Mac and Printer) are set to the same subnet (if printing via TCP/IP) or if AppleTalk is being used, make sure it is enabled on both devices.
You may also have to create a new printer. When you had the printer connected to the USB port of the AEBS, it will have been configured as a local device but printing via a virtual USB port. When the printer was connected to the hub, it would have been configured as a network device.
If this works then at least you know that the hub and the network cables are okay. The next step would be to ensure the AEBS, the printer and the Mac are all set to use the same protocol.
If they are all correct then try deleting the printer from the Printer List, running the Reset Printing System function and adding the network printer again. If you are using TCP/IP, you could even try pinging the printer to ensure the path to the printer is open.
Regards,
Paul

MacBook won't print PDF files, it states The process "pstopdffilter" stopped unexpectedly with status 1

Question: MacBooK won't print PDF files, after selecting print it states; The process "pstopdffilter" stopped unexpectedly with status 1. I am currently using a HP Deskjet 4400 series printer and it works fine with all our other lap top computers. Thanks for any help.

The pictwpstops filter on OS X machines, converts the job to straight Postscript before the normal CUPS filters get it.
If the Adobe APPs have a choice of what kind of PS to send, like Binary or ASCII, try toggling that setting to the opposite of what it is.
Though, if a reboot fixed it then likely the problem was a remporary bit flip, which may or may not happen again.

Message on C8100: The process "usb" stopped unexpectedly with status 81. What should I do?

Our C8100 printer has worked well with our wireless setup for a few years. It is now not printing from any of our home computers (wireless is working fine on these Mac's). I've already turned off both computers and printer, waiting a few minutes and turned them back on.
Message on computer screen -- The process "usb" stopped unexpectedly with status 81. What does this mean?

Yes it is a photosmart C6380 all in one
You are lucky. That model gives you an option not offered on cheaper printers.
You could abandon the USB connection completely and use ethernet to print. That model has, in addition to USB, an ethernet (or "network") port and wireless connectivity. Wireless can be flaky but ethernet is an amazing way to print--faster and more stable that using USB. The port should should be just above or below the USB port.
If your computer is already connected to the internet via ethernet, you can get an inexpensive ethernet router to create enough ports. The router goes between your modem and the computer gear. One router port is usually marked "WAN" and is where you connect an ethernet cable going from the modem. The router will have several other ports marked "LAN" that those connect yo you computer equipment.
You are basically splitting one ethernet line into several. If you have only the iMac and the HP printer, each one would connect to its own LAN port and you can print without USB issues. Normally setting up a wired router takes no software and no tweaking on your part. You connect the wires and it's running.
Here's a start on learning about home networking. In teh picture, what's labeled "gateway" is the router.
http://en.wikipedia.org/wiki/Home_network

Process "cgpdftops" stopped unexpectedly with status 1

Suddenly my iMac G5 has stopped printing to my Kyocera-Mita FS1010 laser printer. The printer has done over 6,000 pages in this set-up.
The printer is set as USB to an Airport Express, the computer is an iMac G5 running Mac OS X (10.4.11).
The message in the print window is The process "cgpdftops" stopped unexpectedly with status 1.
the cups log is:
I [11/Nov/2008:16:41:57 +1100] Adding start banner page "none" to job 2000.
I [11/Nov/2008:16:41:57 +1100] Job 2000 queued on 'KyoceraFS1010' by 'ian'.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/cgpdftops (PID 1625) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/pstops (PID 1626) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/kyofilter (PID 1627) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started backend /usr/libexec/cups/backend/mdns (PID 1628) for job 2000.
E [11/Nov/2008:16:41:57 +1100] [Job 2000] Couldn't create CGPS Context. The likely problem is a permissions problem with the /tmp directory.
E [11/Nov/2008:16:41:57 +1100] PID 1625 stopped with status 1!
I [11/Nov/2008:16:41:57 +1100] Hint: Try setting the LogLevel to "debug" to find out more.
I ran disk utility to fix permissions, but the printing didn't work
I booted from the install disk and repaired the disks (no problems found)
I am now able to print using Adobe Reader, but not Microsoft Word or TextEdit (the only two I have tested)
Printing to my inkjet printer works fine for all applications.
I desperately need help as I have heaps of stuff to print for a meeting this Friday.
Thanks
Ian

I have completed all you suggested, including re-installing drivers. The result is the same.
The printer is physically attached to my Airport Extreme as a USB Printer.
I can print successfully to the printer from the iMac G5 when using Adobe Reader.
I cannot print using Word, Excel, TextEdit, Safari, Mail or Preview using iMac G5. Others not tested.
I can print from my MacBook to the printer for every application thus tested.
Thus there is nothing wrong with the Printer, nothing wrong with the Airport Extreme.
The problem lies within the iMac G5 and the software/server used by the G5 to print. Presumerably the Adobe Reader prints using its own software/server.
What else can I do?
Ian

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

MAC OS-X 10.4.11 PRINTER SAMSUNG SCX-4521 SAMSUNG CLX-3185 The process "rastertoqpdl" stopped unexpectedly with status 1

Hi Paolo,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html

Inbound Idocs are not Processing

Hi,
Inbound IDOCS queue is not processing if any one IDOC is showing amber(error) . Please let me know the resolution to avoid this issue or let me know the BASIS setting to avoid it.
Regards,
PVK.

Hello,
Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
Help on RBDAPP01
Regards,
Sameer

Want to do mass processing for inspection lots with status SPRQ

Hello,
My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
Thanks
Bhavesh

Dear Bhavesh
You may have to modify the standard program to do so. Modify this program RQEVAI30.
This can help you
Regards
gajesh

Partner page/feed with status of current CMS issues?

Gday BC users
I logged a detailed support request around the following, but the Adobe support system had an error processing the form, so it went into a black hole (back button didn't save me this time).
The CMS is behaving differently than expected at present. Presumably this affects all users of BC presently, so I figure there may be a status page that updates us. Does anybody know of such a page?
I imagine it would be more useful than every BC user this morning writing in about shared problems with the CMS?
The problems I am experiencing with the CMS this morning are:
- After creating a new page, and applying a template, save, close, the template does not actually apply. Opening the page again, reapplying the template, save, close, it does apply.
- After creating a new page, and wanting to add it to a menu via the 'More Actions' button, there is no such button. Close, reopen, there's a 'More Actions' button.
Since these are basic functions playing up, I know they will get attention, but I don't feel like being one of potentially thousands writing in about the issue.
If such a status page/feed is not available, I'll check the wishlist.
What do others think about this type of situation — would you like such an informative page or feed?
cheers
Darryl

Hi Darryl,
I just tried replicating those errors and everything worked for me as expected in Chrome on Mac.
Here is my attempt to replicate the first issue with the template assignment - http://screencast.com/t/jSlIijab
I also looked at More Actions after creating that page and Add page to the menu item was there.
Can you try this in a different browser or clear the cache and cookies? Also, tell us more about the environment you're using. Finally, see if you can provide a URL to your site and I can test this for you on your site. Please give me some details, such as the exact workflow and the name of the template you are assigning.
Cheers,
Mario

**URGENT** - PRODUCTION ISSUE with Planning Layout

Hi,
we've a manual planning layout that uses both macros SAPAFTERDATAPUT and SAPBEFOREDATAGET with custom code developed in these 2 macros to switch data between "SEM-BPS 1" and "New" sheet.
Layout has 11 characteristics in lead columns and around 40 keyfigures in data columns (dynamic).
Using macros, we are formatting SEM-BPS 1 sheet to display all dynamic data coumns in a single page of New sheet.
for this, our custom macro formats each row of SEM-BPS1 into 10 rows of New sheet by reducing 40 columns into 4 (columns is what matters for our users but not rows).
We tried this for 40 rows of data. (means, 40 rows 40 columns). Our Custom macro formed 400 rows and 4 columns into New Sheet and even switched data between "SEM-BPS 1" and "New" sheet as per our macro coding. here, we can execute all planning functions. fine till this point
Now, we have a problem when dealing with 100 rows. (means, 100 rows 40 columns). Our custom macro had formed 1000 rows and 4 columns as expected with accurare data. 
at this point, When we started running any planning function or even when we just click on check button (check button runs both SAP macros, I assume), system is freezing up doing nothing. each time, we had to kill the process. when we looked into CPU usage, we can see that excel.exe process is using 99% of CPU.
Appreciate if any one can share experinces on this.
Note: 
1. By disabling custom macros, we executed 100 rows 40 columns w/o any issues.
2. when executed custom macros outside of SAP for 1000 rows 4 columns, both macros took just 2 seconds to switch data between sheets.

Hi there
This is the option Jeff was referring to. I see it in my own RoboHelp version 10. As we aren't seeing it in your screen capture, I'm wondering if this was an option that was added via a service release you haven't installed.
I do suppose another possibility would be that you are using RoboHelp for Word and perhaps that isn't an option with that application.
Cheers... Rick

MDM Inbound Port Not Processing Files

Dear Experts,
I got an issue while processing file from Ready folder of a specific Inbound Port where files are not processed then i tried with another inbound port of the same repository there it is working fine. Can anybody please help me out to make it work.
Thanks
Ravi

Hi Ravi,
Make sure the user ID that you are using for the auto imports in the mdis.ini file has sufficient rights for that particular port. If thats not there the file would not autoimport.
You could even try importing the file manually using import type as port. This will help you identify if there any problems in the file and its schema that you trying to import.
Also check if the port is set to automatic and the schema and map is maintained correctly.
Another thing that you could check in the console is the port status. If there is a file in the ready folder it must display has data. Or if a file in the exception folder it must then show blocked on exception if you have set that property to yes.
In cases when it does not show if afile present or not,you need to make sure the directory path mentioned in the mdis.ini file is correct. Also you would need to restart the importserver through the services and check again.
If nothing works try deleting the port and recreating it through the console.
Regards,
Aditya Dhurandhar.

FEBA - bank statements not processed (status yellow)

Hi,
When using the FEBA transaction (Bank statements), some bank statements were not processed. They have the status yellow.
What does this mean?
How can I process it?
Thank you.
Kind regards,
Linda

Hi Linda,
First of all check, the vendor address details. Is your SAP Version ECC6. If so, from FK02 Vendor master change - in the vendor address details maintain the postal code and city details and once again execute the proposal run. Delete the earlier proposal and enter a fresh proposal. This should work.
Alternativelya lso check your FBZP settings.
Hope this helps. Assign points if useful.
regards,
radhika

Adalnctl.sh: exiting with status 127

Hi all,
I just clonned 11i, but noticed that when I restart apps tier I am getting "exiting with status 1" message.
Looked at the log and found:
Setting service OracleTNSListener80APPS_SPIUAT_finappstest01kt to mode 2
Executing service control script:
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh start
Timeout specified in context file: 100 second(s)
script returned:
adalnctl.sh version
Checking for FNDFS executable.
Starting listener process APPS_SPIUAT.
adalnctl.sh: exiting with status 127
.end std out.
.end err out.
Where do I start?
Thanks,
Eugene

Here is what adalnctl.txt shows. Could you please tell me if patch that you mentioned references these errors?
cat adalnctl.txt
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 156: lsnrctl: command not found
Listener APPS_SPIUAT has already been stopped.
adalnctl.sh: exiting with status 2
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 127: lsnrctl: command not found
Starting listener process APPS_SPIUAT.
/uat/appluat/comn/admin/scripts/SPIUAT_finappstest01kt/adalnctl.sh: line 138: lsnrctl: command not found
adalnctl.sh: exiting with status 127

Adalnctl failed to start with status 127

OS:red hat as4
ebs: 11.5.9
now my system can be started,but the adalnctl failed to start with status 127.
the error message is about lsnrctl which saied that lsnrctl: command not found.
but when i start the lsnrctl with oracle owner,the lsnrctl was started immediately.
however,i found that,the lsnrctl was conected to the port 1521,the adalnctl to the port 1626.
please help me to see it!
the cdalnctl log was this:
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=ebstest)(Port=1626))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Starting listener process APPS_PROD.
LSNRCTL for Linux: Version 9.2.0.3.0 - Production on 20-MAY-2009 17:03:27
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting /u01/oradata/prodora/8.0.6/bin/tnslsnr: please wait...
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 2: No such file or directory
adalnctl.sh: exiting with status 1
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1
./adalnctl.sh: line 126: lsnrctl: command not found
Starting listener process APPS_PROD.
./adalnctl.sh: line 137: lsnrctl: command not found
adalnctl.sh: exiting with status 127
Checking status for listener process APPS_PROD.
adalnctl.sh: exiting with status 1

oh maybe i found it
i have more than one listener.ora
[root@ebstest /]# find -name listener.ora
./u01/oradata/prodora/iAS/hs/admin/listener.ora
./u01/oradata/prodora/iAS/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/samples/listener.ora
./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/samples/listener.ora
./u01/oradata/proddb/9.2.0/network/admin/PROD_ebstest/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010106/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010108/listener.ora
./u01/oradata/proddb/9.2.0/appsutil/out/PROD_ebstest/01010121/listener.ora
and the other listener.ora was about port 1626
[root@ebstest /]# cat ./u01/oradata/prodora/8.0.6/network/admin/PROD_ebstest/listener.ora
# $Header: admk80ln_ux.sql 115.13 2003/04/03 08:05:06 skghosh noship $
# LISTENER.ORA For Oracle Applications
# This file is automatically generated
APPS_PROD =
(ADDRESS_LIST =
(ADDRESS= (PROTOCOL= TCP)(Host= ebstest)(Port= 1626))
SID_LIST_APPS_PROD =
(SID_LIST =
( SID_DESC = ( SID_NAME = FNDSM_PROD )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDSM )
( envs='MYAPPSORA=/u01/oradata/prodappl/APPSPROD_ebstest.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/u01/oradata/prodcomn/admin/scripts/PROD_ebstest/gsmstart.sh' )
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /u01/oradata/prodora/8.0.6 )
( PROGRAM = /u01/oradata/prodappl/fnd/11.5.0/bin/FNDFS )
( envs='EPC_DISABLED=TRUE,NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1,LD_LIBRARY_PATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,SHLIB_PATH=/usr/lib:/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,LIBPATH=/usr/dt/lib:/usr/openwin/lib:/u01/oradata/prodora/8.0.6/lib,APPLFSTT=PROD,APPLFSWD=/u01/oradata/prodappl/admin' )
STARTUP_WAIT_TIME_APPS_PROD = 0
CONNECT_TIMEOUT_APPS_PROD = 10
TRACE_LEVEL_APPS_PROD = OFF
LOG_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
LOG_FILE_APPS_PROD = APPS_PROD
TRACE_DIRECTORY_APPS_PROD = /u01/oradata/prodora/8.0.6/network/admin
TRACE_FILE_APPS_PROD = APPS_PROD

IDOC is not processing in R/3 with status 64(Urgent)--Production issue.

Similar Messages

Maybe you are looking for