Idoc is recieved on port but only control data

Hi all,
I hav created a program to send data on file port. Idoc gives status 03. but we we see data on recieving port (when file is generated)then data is abent only control data is recieved . No data records are there.I'm using FM EDI_OUTPUT_NEW to send data
If I send that idoc again directly running The FM EDI_OUTPUT_NEW then then conrol data and data records are recieved successfully.
Plz help me
Regards
Richa

Hi!
The data section is missing mostly in that case, if all the data fields within it is empty. IDoc sending is skipping empty fields.
In WE19, I think you entered all data within the fields.
Check your sender program, you might accidentally clear the IDoc data strucure before the MASTER_IDOC_DISTRIBUTE fm call.
Regards
Tamá

Similar Messages

External video projector - How can I hook up my Mini DisplayPort to DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?

Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFR

The Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do this?

Hi Jessica,
No, the SD slot will not work, you need an ExpressCard/34 slot.
I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

I am using a Conditional Retrieval Trigger but only recording data around a very narrow band relative to the set point. Any thoughts? Thanks

Since I am pretty new to LabView, I have tried to build this with examples given and have things running my way except for this trigger problem. I would like to have my acquisition channel serve as my trigger channel and only log data after this point is reached and stop after the level goes back under the set point.
Attachments:
Force_Monitor.vi ‏92 KB

I apologize, but I did not realize what hardware you were using previously. The 6024E card does not have analog triggers. It only supports digital triggering. Therefore, you will be unable to configure an analog start and stop trigger.
In order to configure a digital start and stop trigger, you may want to look at the following example program.
Continuously Acquiring Analog Signals Using a Digital Start and Stop Trigger in LabVIEW
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3ED3556A4E034080020E74861&p_node=DZ52308&p_submitted=N&p_rank=&p_answer=&p_source=Internal
The work-around since your board does not support analog triggering is to use conditional retrieval, which implements a circular buffer in c
omputer memory and checks each point as it is acquired to see if it matches the trigger conditions. When the trigger conditions are met LabVIEW reads the desired data from the buffer. Since the program you are pointing me to uses conditional retrieval, I will assume you already knew of this work-around. Basically you will no longer be performing a hardware trigger. Instead you will just be checking each input value to see if it falls in an acceptable range. Unfortunately, the VI you attached to your post is missing subVIs. I cannot open your attachment and run it with the broken subVIs. You will need to save your application as a library (llb) in order for me to view it.
Regards,
Justin

I want to restore my MacBook with Lion, but only keep data

My MacBook is slow and buggy, I already have Lion installed. All I want is to keep all my Data (Songs, videos, pics, etc) but want everything else with Factory settings, is there an easy way to go about this?

yes, by making sure your data is backed up, erasing the hard drive via disk utility and booting into Lion recovery and only restoring the desired data after Lion is installed.

Two characteristics for date but only same date wanted?

Hello experts,
we have 2 date characteristics,
Calendar day
Due day
For one calendar day we could have several due dates. But in Reporting we just want to have always for the calendar day the same due day. We know how to resolv it in the data model but we prefer a reporting solution.
example:
Calendar day - 01/01/2009 | 01/02/2009
Due date - 01/01/2009 - 01/03/2009 | 01/02/2009 - 01/03/2009
Key figure - 100 - 1500 | 120 - 150
We just want to see the due date 01/01/2009. Both characteristics are drilled down.
Result example wanted:
Calendar day - 01/01/2009 | 01/03/2009
Due Date - 01/01/2009 | 01/03/2009
Key figure - 100 | 200
Thank you for help!
regards,
Peter

Hi,
You can do this by using replacement path variables and defining a formula which compares these two variables. Output of the formula will be 1 or 0 based on the comparision (Calday == due date).
After this you can define a condition using the formula you have created to compare those dates.
but i think all this can be achieved only if you have the due date in the drill down. however you can hide the due date by keeping it in rows, i think this will not have an effect in the result of the query.
let us know if this helps,
Regards,
Rk.

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first p

I have seen on this community that the earpods do not work on iPod shuffle gen 3 but when I was using on them it worked the control panel thing that is but only until I turned it off I don't understand why it won't work again and why it did in the first place can someone please explain and tell me how to make it work again

Sorry first time asking question didn't mean to write same thing twice well copy paste

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ? I tried open in icloud control panel but only can see my photo's stream

leonsee94 wrote:
Where can I see my camera roll's photos which already backup into the icloud on my win7 pc ?
You cannot see photos backed up in iCloud on your computer.
Camera Roll photos backed up to iCloud are still in your Camera Roll on your iPhone.
You need to regularly sync the photos to your computer. (then you can see them on your computer).
-> http://support.apple.com/kb/HT1296
then delete them from your Camera Roll.
You can sync the photos you want on your iPhone back to your iPhone using iTunes.
-> http://support.apple.com/kb/HT4236

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Monitor a TCP port but alert only if timed out X times

Hello,
I need to build a moniotr that will probe a TCP port but alert only if timed out X times
I was looking at Microsoft.SystemCenter.SyntheticTransactions.TCPPortCheckProbe module but it doesn't have this options
Thanks,
Marius

You can check
http://www.ghacks.net/2010/05/25/tcp-port-monitor-port-alert/
for TCP Port Monitor Port Alert

My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

My iphone was off for almost two weeks and once i cut it back on i only recieved text messages but no imessages that i KNOW were sent to my phone... is there anyway i can see them or no?

Hi,
In Messages on the Mac do you have the Preferences > Messages section set to "Save History when Conversations are Closed" ?
This will store all IMs and iMessages in ~/Library/Messages/Archive.
Use the Finder > Go Menu > Go to Folder and type that path into the Dialogue box that appears. (~/Library/Messages/Archive).
They are stored in dated folders so some guessing/trail and error will be needed.
You may find that if this was an iMessage and you send the person a new message that the whole History with that Contact since you installed Mountain Lion/Started Messages may appear and that it is scrollable the closer you get to the "top" and the top may keep moving until all is on show.
10:31 PM Monday; December 24, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???

Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support

My iMac has only 3 usb ports, but I need four.

My external hard drive (Timemachine), my keyboard, my power supply backup (APC UPS), and my usb hub are all supposed to be connected directly to the iMac. How do I do this (short of getting a wireless keyboard)?

steve359: I've got external powered hub with adequate space. Problem is that Apple recommends that Timemachine and keyboard both be directly plugged into iMac. APC recommends that UPS be directly plugged into iMac. That leaves everything else which goes through the hub. I need to get a new external HD (my Iomega died). If anyone knows of a good external HD that allows connection by usb and has an auxilliary usb port so my hub can go through that, it might work. The Iomega used firewire so it didn't compete for iMac usb ports, but I'd prefer to have a usb HD.
seventy one: Rechecked. My iMac has 3 usb ports and two firewire.

IDoc Message: Invalid Sender Port in FM IDOC_INBOUND_SINGLE

Hi experts
For inbounding IDocs I use the FM IDOC_INBOUND_SINGLE.
My problem is, the IDocs always gets the status 56 with error message <Sender port in control record is invalid>.
I don't understand the message, because all ports are maintained in WE21.
When I execute BD84 for created IDocs everything is OK.
But my problem is, that I don't want to execute BD84 after every IDoc which will be created by the FM IDOC_INBOUND_SINGLE.
So could anyone help with the error message <Sender port in control record is invalid>.
Thx for every help

Hello Sachin
Thx for fast help.
However, a few minutes ago I solved the problem (debugged SAP-FM).
Problem had been, that direction was 1 instead of 2.

Idoc is recieved on port but only control data

Similar Messages

Maybe you are looking for