IDOC is sending somewrong values

Hi,
we have once idoc where it was sending the wrong currency values. Like in place of 2.3 it was seding 1.8. in currency segment, in the data record. can you please let me know where we have to adjust this .

Send a message to SAP. Also when asking questions about IDocs, in the future you might to mention at least the IDoc name.

Similar Messages

Want to replicate Payext IDocs and send them to another logical system

Hi all
we are generating payext Idocs to a bank partner profile using rffoedi1 program. Our requirement is to replicate the same payext IDoc and send to another logical system using a different partner profile.
I have a rough idea of sucking data from EDID4 table....
Can any one let me know how the code looks like If we have to create same IDocs again with different control record with same kind of data?
can some one throw their ideas of doing this with less development work?
Thanks
Steve

Try this way:-->
1.Using fm IDOC_READ_COMPLETELY get complete data of IDoc you want to send, then change the Header record (EDIDC) with new partner profile, port and other values
2. Pass these values to fm MASTER_IDOC_DISTRIBUTE.
(pl remember to clear EDIDS values before calling above said fm)
This will send your IDoc to new destination
a®s
Edited by: a®s on Apr 10, 2008 3:41 PM

IDOC for sending material data including classification data?

Hi everyone,
I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
I would be very grateful if someone could please help me.
Thanks in advance and best regards,
Ben

Hi Ben
Kindly follows the below steps and trasaction screens, I believe you will be able to send the mat data incl. classification data to other external system through IDOC.
Steps:
Create material master record in SAP
Enter T.Code BD10 to send material master data from SAP to 3rd Party Logistics Provider
Enter Material,Logical System and click Execute(F8)
Press ENTER to continue
Press ENTER to continue
Enter T.Code WE09 to check the status and content of the Idoc created
Enter Idoc Segment name in Search in Segment, Field name in Search in Field, Material No in "for Value" and press F8 to execute
Double click on the Idoc number to check the content and status of the Idoc
Expand the Status records to check the STATUS of the Idoc
To check the fields in the Idoc, expand Data records and check the Mandatory fields in each Segment
Transaction Screens:
Transaction / Screen
MM01
BD10
BD10 Screen
BD10 Screen
BD10 Screen
WE09
WE09 Screen
WE09 Screen
WE09 Screen
WE09 Screen
Expected Result:
Expected Result
Material Master Record Created
Send Material Screen appears
A popup window appears with a message "1 master Idoc(s) set up for message type MATMAS"
A popup window appears with a message "1 Communication Idoc(s) generated for message type MATMAS"
Send Material Screen appears
Idoc Search for Business Content screen appears
Idoc corresponding to the material no is displayed
Idoc along with the 3 records(Control Record,Data Record,Status Record) appers
Final STATUS should be 03(Data passed to port OK)
All Mandatory fields must be populated with correct data
If it is useful reward points
Thanks
Saravana

Sending Date value to SAP R/3

Hi,
I am trying to send Date value from Text box (javascript) to SAP R/3 thru transaction and BAPI. But it is not accepting it. In SAP it accepting time value but it is not accepting date value. It take default date (current system date).
But when we give date value directly in transaction it accepts.
what is the problem. how to solve it?
Regards,
Senthil

Your text box is a string. If you assign it to a Local (or Transaction) Property of type DateTime, xMII may properly interpret it and allow the DateTime value to be populated. However when you try to map it to SAP, it will most likely fail as it is of datatype DateTime (which is actually xml datetime). You can assign the text box value to a Local Property with datatype String and format it from there. Or if your Local Property is correctly interpreting the string from the text box and is updated, then you can explicitly convert from xml datetime to string type.
functions which might be of interest or applicable are:
datefromxmlformat
dateformat
stringpart
Good luck,
Mike

I want to send a value from JSP file to another JSP file without..

I want to send a value from one.JSP file to another two.JSP file without to show the content HTML of the one.JSP in two.JSP (with include), only take the values processed in a Bean :
===================
Bean
package pck;
import java.io.*;
public class yyyy {
public String getXxx() {
return cccc;
========================
one.JSP
<jsp:useBean id="idBean" class="pck.yyyy" scope="??"/>
<%idBean.setXxx(ccc);%>
========================
two.JSP
<%@ include file="one.jsp"%>
<%=idBean.getXxx()%>
but without to show the content HTML of one.JSP in two.JSP.
Can someone help me?, please.

Why don't just put the common code in a separate file and include it in both. i.e. the code that is in one.jsp that is needed by two.jsp could be put in a common file and included in both pages, thus the HTML is separated off. If this will not work, set a boolean value in two.jsp that can be used by one.jsp to decide if the HTML should be displayed or not.
Steve

Round badi does not work in default formulas triggered when sending a value

I have implemented the round BADI from sdn (how to). Problem is that it works perfect when :
- I execute it in UKT
- I run it as a data manager package
- I put it in default formulas and run the default formulas as a packe
It however doesn't work when it is executed in default formulas when sending a value from an input scheduls.It gives an error "error converting records - the root element is missing"
Anybody a clue ?
Cheers
Nico

Answering to myself!
Code correction required:
loop at it_cv into ls_cv.
*{ INSERT BPCK900005 2
CHECK ls_cv-dimension NE 'MEASURES'.
*} INSERT

Send orders idoc from sender

Experts
tell me which tcode is used to send the sales order data from sender to receiver.
Example : we use the following tcode to send the master data idocs like
SEND MATERIAL MASTER: BD10
SEND VENDOR MASTER: BD12
1)is there any tcode to send the sales order data also like this.
2)if tcode not there then tell me which function module is used in the sender system to fill the segments of order01 idoc.
3) I want to fill the sales order data in the segments , the following data i need to fill
sales area , document type , customer numeber , payment terms , material , net price , quantity , order data , po number.
tell me which segments are used for this.
4)where to see the segments of the idoc and its fields.
5) if any one having sample code to fill the orders idoc , please give me the link

prabhu
send data through Message control ? means how to send .
My requirement is to fill the idoc segments and then to post.
Which tcode is used to see the segment fileds both header and item other than we60 , we61.
For orders01 idoc how to identify which segment fields are used for sales area , customer , payment term etc becasue po fields are also there, so confusing

Not Working-LexicalParamater used to send multiple values with one prameter

Hi,
I am calling a reportname.rdf from the web(using apache webserver and url as follows:
http://localhost/cgi-bin/rwcgi60.exe?server=reportservername&report=acctActivity.rdf&userid=bizsystest/[email protected]&destype=cache&desformat=pdf&placeholdercolumnname='2,3,4'&docid=2
I have to send multiple values for fundid.
To accomplish this,
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number).
In sql query
select table1.c1, table2.c2 from table1, table2, table3, table4 where table1.cl in (&placeholdercolumname)
and table1.c2 = table2.c2(+)
and table3.doccode = :docid
From Web, URL contains the placeholdercolumnnmae='2,3,4'
Still its taking the value zero and output is generating.
Its not taking my newvalues ('2,3,4') in IN parameter.
I donot know the reason, where exactly is wrong.
Please help me to resolve.
2. My Second Issue:
Is there anyway, can we hide all key/value parameters send through the URL not visible to endusers
like servername, database userid and password and configure some where, so system can pickup each time when I run report.
Please help me to resolve.
Thanks,
Usha.

Hi Usha,
First of all, I assume that the place holder column you have specified is a UserParameter which you have specified on the command line. I don't think there is any direct way of doing that.
I created a placeholder column and initialized the value '0' and type taken as character(even though datatype of this column is number). If I infer correctly from what you are saying, you can't mix and match the datatypes of the columns, you can't define the parameter as a number and pass characters. I suggest you declare your parameter as a character with sufficient width to hold your LOV and then process them convert them to numbers.
Another suggestion is try replacing your "Placeholder" with another query construct.
For your Second issue,
You can use the Key-Map file Oracle Reports provides for the Web client. Please refer to
<ORACLE_HOME>\Report60\server\cgicmd.dat.
In the cgicmd.dat,you can alias your entire commandline with a single key and use that key in your URL.
Regards
Oracle Reports Team.

Creating Idoc and sending it to its own...

Hello All,
The functional design specified that an inbound function module needs to be created to process a custom IDOC, let's say ZMMDLRTL, and using the data from the segments from this basic type ZMMDLRTL, I need to create another IDOC of basic type PORDCR101 to create a PO. This PO IDOC would then have to be posted to the same system where the inbound function module that would process the ZMMDLRTL IDOC. So this is just like creating an IDOC and sending it to yourself right?
I used the function module MASTER_IDOC_DISTRIBUTE to create the PORDCR101 Idoc and sends it to itself. But now I am getting an error status 20, which is "Receive of IDOC is its own logical system". I just need some inputs on this.
Thanks,
Kristine

Hi!
In two words - to avoid this error you have to send PORDCR101 to another logical system pointing to the same client and make corresponding settings in distribution model (as you use MASTER_IDOC_DISTRIBUTE).
Proceed as follows:
1. Create a "dummy" logical system name, say LOGSYSD. This dummy logical system will serve as the receiver system in the distribution model.
2. Using SM59 create RFC-destination LOGSYSD for the dummy logical system. The RFC-destination addresses the same client.
3. Create a distribution view in BD64 with your "real" logical system for client as the sender and LOGSYSD as the receiver for your message type.
4. Generate partner profiles for distribution model using BD82.
5. Using WE20 create inbound parameters for your message type for <b>"real"</b> logical system.
Hope it helps.
Regards,
Maxim.

How to create idoc and send it frm one sap to another sap

hi,
can anyone tell me the complete procedure of creating the idoc and sending it to another sap r/3
how to create rfc destination, partner profiles, port and outbound parameter and inbound parameter
thanks

Hi Azhar,
Go through the following Links
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Go through the following Steps for Creating IDoc Via ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
        save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
   select all what ever you want and delete remaining fields.
   save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
   it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
   give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
Sreeni

HOW to send a value to another jsp page

HOW to send a value to another jsp page, like user name in one jsp page to another jsp page

In the most simplest form...
// pageA.jsp
<html>
<body>
<form action="pageB.jsp" method="post">
<b>First Name:</b> <input type="text" name="FNAME" value="Joe">
<input type="submit" value="Submit">
</form>
</body>
</html>
// pageB.jsp
<html>
<body>
<b>Name:<b> <%=request.getParameter("FNAME")%>
</body>
</html>

Wanna send integer value by reference in function

I wanna send integer value by reference thro' function. Here's the code going.
class test
basic b = new basic();
test()
test2.Fuction(b.value);
class basic
int value;
basic(){}
//////here i want value to be affected by Function.I don't want it affected by value, but by reference.
class test2
public static void Function(int value)
value++;

If you want to update the value in your b object, then you have to pass the reference of that object to test2.Function(..). Here is one way to do it:
class test {
basic b = new basic();
test() {
test2.Function(b);
class test2 {
public static void Function(basic b) {
b.value++;
}It's a good idea to follow the java naming convention. Classes should begin with an upper case letter. Methods and variable names with a lover case letter (but final static variables with all upper case letters).

IDOC CLFMAS set initial values

Hi,
I am using IDOC CLFMAS02 to update values in material classification. I do not have problems with modify a normal value. But I want to set a date classification value to initial. If I inform with ' ' the value is showed as '00.00.0000', but I need that this value become initial.
I am trying to use field MSGFN = 003 (delete) on segment E1AUSPM but it does not running.
The FM that we use to input idoc is IDOC_INPUT_CLFMAS.
Any suggestion. Thanks¡¡¡¡

Yes I try to remove date characteristic from E1AUSPM.
Also I try to set blank value.
Also I try with MSGFN value = 003.
I think that your code is only to delete values from multiple-values characteristics.
TEST 1 ( set blank)
Current Material characteristic value: 01.01.2011
Objective Material characteristic value: Blank
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     004Z_CHARACTERISTIC
    E1DATEM                     004
Result Material characteristic value: 00.00.0000
TEST 2 (MSGFN 003)
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC                        01.01.2011
    E1DATEM                     004
OR
E1OCLFM                     004MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     004ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC
    E1DATEM                     004
OR
E1OCLFM                     003MARA      00000XXXXXXXXXXXXX                           001OMARA
    E1KSSKM                     003ZCLAS                                 1
    E1AUSPM                     003Z_CHARACTERISTIC                         01.01.2011
    E1DATEM                     003
OR others...
The problem is that characteristic must be defined to DATE format and when I set blank value, inside code is converting to 00.00.0000

IDOC for sending material including classification data?

Hi everyone,
I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
I would be very grateful if someone could please help me.
Thanks in advance and best regards,
Ben

Hi,
CLFMAS01     Master object classification
CLFMAS02     Master object classification
STTMAT01     STTMAT: Material variants
BOMMAT01     Master BOM - material
BOMMAT02     Master BOM - material (2)
BOMMAT03     Material BOM (from 4.6B)
BOMMAT04     Material BOM with UPS Link
MATMAS01     Material Master
MATMAS02     Material Master
MATMAS03     Material Master
MATMAS04     Material Master
MATMAS0x with CLFMAS0x should solve your problem.
Regards,
Srilatha.

One LIFNR, based on a function can send multiple values to traget.

Dear SDNers,
I need your help to solve this problem
Let me explain the situation.
I have a field value LIFNR, which is sending a value from the source to target.
Here by using a User Define Function based on parameters I have to map the exact target.
The problem is:
Currently I am having a function which is sending a value to the target based on parameters and some times the target values are more that a single value. At that situation the function returns a random value to the target value.
In the below Old Function there is a method used to execute only one value, if more than one values are there then it will select a random value from them and send that value to the destination.
IFIdentifier src = XIVMFactory.newIdentifier(strContext, senderAgency, senderScheme);
IFIdentifier dst = XIVMFactory.newIdentifier(strContext, receiverAgency , receiverScheme);
String strResult = XIVMService.executeMapping(src, dst, a);
Solution as in New Function,
I have created a array to that particular destination variable and stored all value in array and passed to that target value. I have bold that letters.
//here I run a loop to store multiple destination value
if(receiverService.length>1)
for(i=0;i<receiverService.length;i++)
if (receiverService.equals("EM1CLNT003")||receiverService.equals("KM1CLNT003")||receiverService.equals("C11CLNT003")) receiverAgency<i> = "C11CLNT003";
I am sending both the functions
My question is is that LIFNR can send the multiple values to the detination for this change ?
And also I want to know how to execute this program and transport and testing this UDF.
Please need your inputs.
Thanks
Bala Prasad
4. Old Function
java.util.regex.Pattern;java.util.Vector;java.util.regex.Matcher;com.sap.aii.mapping.value.api.*;
public String get_Value_Mapping_Table_V(String a,String scheme,String context,Container container){
// PART1 : First we need to get the sender - and receiver service from the container object
GlobalContainer globalContainer;
String senderService = new String();
String receiverService = new String();
java.util.Map map;
//Fill variables
globalContainer = container.getGlobalContainer();
map = globalContainer.getParameters();
// Get the sender- and receiver service constants
senderService = (String) map.get(
StreamTransformationConstants.SENDER_SERVICE);
receiverService = (String) map.get(
StreamTransformationConstants.RECEIVER_SERVICE);
// PART2: Now we need to find the correct value mapping table
String strContext = context;                                //some context value
String senderScheme = scheme;                                    //VendorNumber or VendorAccountGroup
String receiverScheme = scheme;
String receiverAgency = new String();
if (receiverService.equals("EL1CLNT100")||receiverService.equals("KL1CLNT100")||receiverService.equals("PL1CLNT100")) receiverAgency = "PL1CLNT100";
if (receiverService.equals("D01CLNT100")||receiverService.equals("T01CLNT100")||receiverService.equals("P01CLNT100")) receiverAgency = "P01CLNT100";
if (receiverService.equals("EM1CLNT003")||receiverService.equals("KM1CLNT003")||receiverService.equals("C11CLNT003")) receiverAgency<i> = "C11CLNT003";
String senderAgency = "MEPCLNT100";
IFIdentifier src = XIVMFactory.newIdentifier(strContext, senderAgency, senderScheme);
IFIdentifier dst = XIVMFactory.newIdentifier(strContext, receiverAgency , receiverScheme);
            try {
                        String strResult = XIVMService.executeMapping(src, dst, a);
                        return strResult;
            } catch (ValueMappingException e) {
                        return a;
5. New Function
java.util.regex.Pattern;java.util.Vector;java.util.regex.Matcher;com.sap.aii.mapping.value.api.*;
public String get_Value_Mapping_Table_N(String a,String scheme,String context,Container container){
// PART1 : First we need to get the sender - and receiver service from the container object
GlobalContainer globalContainer;
String senderService = new String();
String receiverService = new String();
java.util.Map map;
//Fill variables
globalContainer = container.getGlobalContainer();
map = globalContainer.getParameters();
// Get the sender- and receiver service constants
senderService = (String) map.get(
StreamTransformationConstants.SENDER_SERVICE);
receiverService = (String) map.get(
StreamTransformationConstants.RECEIVER_SERVICE);
// PART2: Now we need to find the correct value mapping table
String strContext = context;                                //some context value
String senderScheme = scheme;                                    //VendorNumber or VendorAccountGroup
String receiverScheme = scheme;
String receiverAgency[] = new String(); //here I changed into a array to store multiple value
if (receiverService.equals("EL1CLNT100")||receiverService.equals("KL1CLNT100")||receiverService.equals("PL1CLNT100")) receiverAgency = "PL1CLNT100";
if (receiverService.equals("D01CLNT100")||receiverService.equals("T01CLNT100")||receiverService.equals("P01CLNT100")) receiverAgency = "P01CLNT100";
//here I run a loop to store multiple destination value
if(receiverService.length>1)
for(i=0;i<receiverService.length;i++)
if (receiverService.equals("EM1CLNT003")||receiverService.equals("KM1CLNT003")||receiverService.equals("C11CLNT003")) receiverAgency<i> = "C11CLNT003";
}String senderAgency = "MEPCLNT100";
IFRequest src = XIVMFactory.newIFRequest(strContext,senderAgency,senderScheme);
IFRequest dst = XIVMFactory.newIFRequest(strContext,receiverAgency,receiverScheme);
            try {
                        String strResult = XIVMService.executeMapping(src, dst, a);
                        return strResult;
            } catch (ValueMappingException e) {
                        return a;

Janaki,
"and it did not work."
That's useless information.
When asking for help with a technical question here, you need to describe exactly what you did, showing all code, explaining the entire context in which the code is used, and showing all error messages and actual results along with a description of the expected results.
One thing though, if this example is based on the standard EMP table, why does "depno" have no "t" in it in all your references?
Scott

IDOC is sending somewrong values

Similar Messages

Maybe you are looking for