IDOC Issue in LSMW

I have created lsmw to transfer fixed asset data using BAPI. I have also did inboud configuration for LSMW to post data. When I run start IDOC Generation after convert data step it says " File 'ZASSET_BAPI_ZASSET.lsmw.conv' transferred for IDoc generation" but when i execute the next step 'Start IDOC Processing' it gives me message 'No Data Selected'. But it works in other different client with same idoc inbound processing configuration'.
Kindly Help me...

ya
sometimes we will get this kind of problems....
if the idocs are generating in 64 status then you can go to bd64 and give the same details and execute it.
if the idocs triggering immediatlly and processing properly then those will process and u get the status either 51 or 53 in WE02.

Similar Messages

  • Non English characters conversion issue in LSMW BAPI Inbound IDOCs

    Hi Experts,
    We have some fields in customer master LSMW data load program which can
    contain non-English characters. We are facing issues in LSMW BAPI
    method with non-English characters Conversion. LMSW steps read and
    conversion are showing the non-English characters properly with out any
    issue. While creating inbound IDOCs most of the non-English characters
    replaced with '#' and its causing issues in creating customer master data in
    system. In our scenario customer data with non-English characters in
    the first name, last name and address details. Any specific setting
    needs to be done from our side? Please suggest me to resolve this issue.
    Thanks
    Rajesh Yadla

    If your language is a unicode tehn you need to change the options  like IN SAP you need to change it to unicode  in the initial screen Customize local layout(ALT F12) options 118  --> Encoding ....

  • Multiple records for a single transaction - Issue in LSMW

    Hi,
    i'm facing a issue in LSMW
    i have the data coming up in the flat file. the data which constitutes the single transaction consists of  data from multiple records from the flat file..
    suppose we have 10 records in the flat file... and all the 10 records related to ony  2 transactions i.e say 6 records to first transaction and next 4 records to next transaction.
    we have a direct input method to handle this data like field1 for first record, field2 for 2nd record and so on...
    while uploading, we will get all the records one by one into our source structure. My question is can we handle this scenario in lsmw? if yes, pls suggest
    Thanks in advance
    Shekhar

    Hi Kris,
    this is regarding the asset creation via AS01..
    we are getting the flat file in that way. Lets assume like this:
    suppose for one transaction we may need to fill 5 depreciation keys and for another option only 3 dep. keys we need to fill.
    then in the flat file, we can get like 5 records for first transaction i.e asset and 3 records for 2nd transaction
    Can we handle this via lsmw
    Regards
    shekhar

  • Issue in LSMW for material master using standard input program RMDATIND!!

    Hello guys,
    I have a issue in LSMW for material master.
    I have a custom field in MARA table. which I want to add in my LSMW.
    I added the field in BMMH1 structure. I'm passing the value to this field, But it is not populated in the table when I run it.
    Is there anything else I need to do apart from addition of field in the structure BMMH1.
    Thanks in advance for your help.
    Regards,
    Sumeet....

    see oss note 44410, it gives you a step by step overview.
    https://service.sap.com/sap/support/notes/44410

  • Issue in lsmw ; error in read file step

    hi,
    i 'm facing some really strange issue in lsmw..
    i have created one header structure and 3 sub structures.
    until now its working fine
    but when i created 4th sub structure and in the read file step, its giving the following error :
    "Generation aborted. Reason: No fields with equal names"
    again if i delete that extra structure, its working fine..
    i really don't understand whats the problem... is there any restriction on number of structures?
    i need ur help guys
    Thanks in advance
    shekhar

    In step 13 Create Batch Input Session .....select Keep Batch input folder check box and goto step14 Run batch Input Session ....
    Slect your session name and click on Process....it will give one window and select Display Errors Only....then it will execute without press enter every screen...if any error is there it will stop and display error screen.
    Mohan

  • How to resolve error while importing data using IDoc method in LSMW ?

    Hi
    I am trying to import my data using IDoc method in LSMW.
    But after completing the whole LSMW process, when I look into the IDOC generated, the error description is as this.
    It talks about the process code and other stuff.
    Function module not allowed : APPL_IDOC_INPUTI
    Message No. B1252
    Diagnosis :
    The function module APPL_IDOC_INPUTI and the application object type which were determined are not valid for this IDoc.
    I am not able to resolve the problem.
    Please help.
    Regards,
    Rachesh Nambiar

    check the below link.
    /people/stephen.johannes/blog/2005/08/18/external-data-loads-for-crm-40-using-xif-adapter

  • Regarding Idoc method in LSMW

    Hai All,
                I have gone through the procedure which is mentioned in the **************** for Idoc Method in LSMW.I have configured the steps for Inbound Idoc Processing.
    Port(File) : LSMW (I mentioned physical directory: C:\ and file name:filelsmw)
    Port(TRFC) : LSMWT (rfc destination of type TCP/IP and in that I mentioned program name:rfcexec.exe)
    Partner Profile: LSMW(of type US and mentioned Inbound Parameters here)
    I have gone through all the steps of LSMW.But every time I am getting the status as 51(Application Document Not Posted).
    Can anyone please help me in solving this.
    Message was edited by:
            Namburi Kalpana

    HI
    see this link
    http://www.****************/Tutorials/LSMW/IDocMethod/

  • NOTES ON ALE, IDOC, BAPI, BADI, LSMW

    HI,
         CAN ANYBODY GIVE ME NOTES OR ANY TYPE OF DOCUMENTATION ON ALE, IDOC, BADI, BAPI, LSMW. I AM NEW TO THIS CONCEPTS. SO PLEASE HELP ME.
                       THANKS IN ADVANCED.

    Hi
    Creation of Custom IDOc type and message Type
    First Create Partner Profile(WE20 Tcode) and Port Definition in WE19 Tcodes.
    take the Basis help to create them.
    1.First create segments in WE31 Tcode with the required dataelements
    2.Create the Basic Idoc Type in WE30
       release the Segments and IDOC type.
    3.Create Message type in We81
    4.Assign the message type to IDOC type in WE82 T code
    5.Create the process code in We41 (for Outbound) WE42 (for Inbound)
    6.Create A fun module in SE37 starting with ZIDOC_OUTPUT_.. by copying some Inbound (for    Inbound) Outbound Fun module
    7.Create  Workflow setting if needed ..
    8. Assign the fun module to Idoc Type, Message Type and WF object (if it is there0
    9.Define setting for fun module in BD51
    10.In BD51 Define the settings for Fun module..
    10.Assign the Processs Code to Fun mod`ule
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    DEFINING THE BADI
    1) execute Tcode SE18.
    2) Specify a definition Name : ZBADI_SPFLI
    3) Press create
    4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
    multiple use.
    5) Choose the interface tab
    6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
    7) Dbl clk on interface name to start class builder . specify a method name (name,
    level, desc).
    Method level desc
    Linese;ection instance methos some desc
    8) place the cursor on the method name desc its parameters to define the interface.
    Parameter type refe field desc
    I_carrid import spfli-carrid some
    I_connid import spefi-connid some
    9) save , check and activate…adapter class proposed by system is
    ZCL_IM_IM_LINESEL is genereated.
    IMPLEMENTATION OF BADI DEFINITION
    1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
    2) Specify aname for implementation ZIM_LINESEL
    3) Specify short desc.
    4) Choose interface tab. System proposes a name fo the implementation class.
    ZCL_IM_IMLINESEL which is already generarted.
    5) Specify short desc for method
    6) Dbl clk on method to insert code..(check the code in “AAA”).
    7) Save , check and activate the code.
    Some useful URL
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    Now write a sample program to use this badi method..
    Look for “BBB” sample program.
    “AAA”
    data : wa_flights type sflight,
    it_flights type table of sflight.
    format color col_heading.
    write:/ 'Flight info of:', i_carrid, i_connid.
    format color col_normal.
    select * from sflight
    into corresponding fields of table it_flights
    where carrid = i_carrid
    and connid = i_connid.
    loop at it_flights into wa_flights.
    write:/ wa_flights-fldate,
    wa_flights-planetype,
    wa_flights-price currency wa_flights-currency,
    wa_flights-seatsmax,
    wa_flights-seatsocc.
    endloop.
    “BBB”
    *& Report ZBADI_TEST *
    REPORT ZBADI_TEST .
    tables: spfli.
    data: wa_spfli type spfli,
    it_spfli type table of spfli with key carrid connid.
    *Initialise the object of the interface.
    data: exit_ref type ref to ZCL_IM_IM_LINESEL,
    exit_ref1 type ref to ZIF_EX_BADISPFLI1.
    selection-screen begin of block b1.
    select-options: s_carr for spfli-carrid.
    selection-screen end of block b1.
    start-of-selection.
    select * from spfli into corresponding fields of table it_spfli
    where carrid in s_carr.
    end-of-selection.
    loop at it_spfli into wa_spfli.
    write:/ wa_spfli-carrid,
    wa_spfli-connid,
    wa_spfli-cityfrom,
    wa_spfli-deptime,
    wa_spfli-arrtime.
    hide: wa_spfli-carrid, wa_spfli-connid.
    endloop.
    at line-selection.
    check not wa_spfli-carrid is initial.
    create object exit_ref.
    exit_ref1 = exit_ref.
    call method exit_ref1->lineselection
    EXPORTING
    i_carrid = wa_spfli-carrid
    i_connid = wa_spfli-connid.
    clear wa_spfli.
    http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
    and
    http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
    BAPI
    http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5e114a4a1611d1894c0000e829fbbd/frameset.htm
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    ALE
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    And also u can get lots of inof from the below link.
    http://www.sapgenie.com/ale/why_ale.htm
    LSMW
    http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
    http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
    http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
    http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
    http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
    http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
    for Long texts Upload
    Please take a look at this..
    http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
    Reward points if useful
    Regards
    Anji

  • Issue with LSMW IDOC method

    Hello there,
             I am facing an issue while creating a LSMW using IDOC method. I am creating it for PROFIT CENTER upload. My file is having the data as, there can be multiple company codes for one profit center, so my file will have more than one record for single profit center. I have to create only one IDOC per profit center, so I have to create multiple segments in that IDOC for different company codes.
             I am not sure how to create multiple segments using LSMW. It will be very helpful, if anyone can tell me how to do it.
    Thanks,
    Ganesh Khumse

    Hello Ganesh,
    I assume that you are using the IDoc Type PRCMAS02 for the creation of Profit Centers along with Company Code assignment.
    In order to be able to extend the Profit Center for Multiple Company Codes, please segregate the source structures into Profit center general data and company code data...along with respective source fields.
    In the structure relations, assign the Profit Center General data to the Idoc segments E1KEPCM & E1KEPCT. Then assign the Company Code data to the segment E1KEPCB.
    The input file layout expected will be something similar to the below layout...
    PCHEAD1
    - CCODE1
    - CCODE2
    PCHEAD2
    - CCODE1
    - CCODE2
    Hope this info resolves your problem.
    Pls reward if this answers your query.
    With Regards
    Vijay Gajavalli

  • IDoc status 51 - LSMW for Creating Purchasing Info Records

    Dear All,
    My req is to create a Conversion for Purchasing Info Records. LSMW's IDoc method is used to develop this conversion wherein Message Type "INFREC" and Basic Type "INFRECMASS01" are being used.
    In the 14th step (Start IDoc Processing), I 'am getting the IDoc status "51" and Status Text "Application document not posted". If I double click on respective IDoc number, I got its Control record, Data records, and Status records; in the status records I can see "51" in Red color with the message "Function module not allowed: IDOC_INPUT_INFREC". If I double click on this it asks me to check the process code...
    Request you guys to resolve the issue....
    Solution will b rewarded.. Thanks in advance....

    I shouldnot use basic type INFREC01 instead of NFRECMASS01.
    'coz Within the FM there is a check for basic type like:
    check idoc type
    if f_idoc_control-idoctp c_idoctp_infrec01. " INFREC01
    raise wrong_function_called.
    endif.
    Even one can go to WE57 and see the basic Type INFREC01 assigned to the FM IDOC_INPUT_INFREC, hence one shud use this basic type...

  • IDoc status 51 - LSMW for Creating Purchasing Info Records using IDoc meth

    Dear All,
    My req is to create a Conversion for Purchasing Info Records. LSMW's IDoc method is used to develop this conversion wherein Message Type "INFREC" and Basic Type "INFRECMASS01" are being used.
    In the 14th step (Start IDoc Processing), I 'am getting the IDoc status "51" and Status Text "Application document not posted". If I double click on respective IDoc number, I got its Control record, Data records, and Status records; in the status records I can see "51" in Red color with the message "Function module not allowed: IDOC_INPUT_INFREC". If I double click on this it asks me to check the process code...
    Request you guys to resolve the issue....
    Solution will b rewarded.. Thanks in advance....

    U should use basic type INFREC01 instead of NFRECMASS01.
    Within the FM there is a check for basic type like:
    check idoc type
        if f_idoc_control-idoctp <> c_idoctp_infrec01. " INFREC01
          raise wrong_function_called.
        endif.
    Edited by: Joyjit Ghosh on Sep 15, 2008 4:57 PM

  • How to manage the GUI timeout issue in LSMW

    Hi all,
    we are running into an issue with our LSMW loads. That issue is that the load process runs in the SAP GUI and the GUI will timeout if someone doesn't generate an SAP transaction in the GUI session every so often. Since we are estimating that our LSMW loads for our production migration will run about 80 hours per batch, this is a problem needs to resolved.
    Very urgent
    Thanks in Advance.
    Jagadish

    Hi
    1. Our LSMW scripts for the following objects are designed for Batch Input and already set up for running in background mode. (Non-issue)
        - ECM
        - Object Links
        - Doc BOM Create
        - Doc BOM Change
    2. Our main issue: for loading DRW/BKT/Characteristics/Doc Files, I have already tested processing the Idocs in Background mode. All the Idocs failed because the background process on the SAP application server cannot access the doc files. (it has to use saphttp.exe on the client)
    3. Frame program for periodic data transfer (see the following instructions from "Date Migration of Non-SAP Systems to R/3")
        To a limited extent, the LSM Workbench also supports periodic data transfer. Preconditions are:
        - The LSMW object has been created and tested completely.
        - The "source application" periodically makes available one or several files on the R/3 application server.
        - The LSMW object does not access files on the frontend. (Files on the frontend cannot be read in batch mode.)
    Help me to solve this problem
    This is very Urgent
    Thanks in Advance
    jagadish

  • IDOC ISSUE full point assigned

    Hi all
    I m facing problem to upload data through idoc.the scenario is like we receive electric meter reading in flat file format. And to upload that data JAVA code is written which will create an IDOC FILE this authorization is only give to 2-3 person in organization and to basis guy also as user changed it’s password in SAP and in JAVA the java code is not going to create the IDOC file and data is not going to upload. after changing user password in sap system ,user not able to upload the data.
    ISU_MR_UPLOAD01 is the idoc file generated. So is there any authorization issue, password issue how to see and view IDOC IN SAP, can any one help me out into this.
    The error with java throws is as;
    1ST ERROR IN TRACE FILE
    ERROR file opened at 20061109 133610 India Standard, SAP-REL 640,0,59 RFC-VER 3  MT-SL
    T:2736 ======> User TR has no RFC authorization for function group SYST .
    T:2736 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
    2ND ERROR ON COMMAND PROMT
    C:\j2sdk1.4.2_07>cd bin
    C:\j2sdk1.4.2_07\bin>java sandsupload
    Creating IDoc...Exception in thread "main" com.sap.mw.idoc.IDoc$Exception: (2) I
    DOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ISU_MR_UPLOAD01
    " is unavailable.
            at com.sap.mw.idoc.jco.JCoIDoc$JCoDocument.<init>(JCoIDoc.java:233)
            at com.sap.mw.idoc.jco.JCoIDoc$JCoDocument.<init>(JCoIDoc.java:187)
            at com.sap.mw.idoc.jco.JCoIDoc.createDocument(JCoIDoc.java:10521)
            at sandsupload.main(sandsupload.java:35)
    the part of java code
    try {
                //create a JCo client pool
                JCO.addClientPool( "MyPool",    //pool name
                                   3,           //maximum pool connections
                                   "333",       //SAP client
                                   " TR",    //user ID
                                   " XYZ",  //password
                                   "EN",        //language
                                   " 1.1.1.1   ", //app server host name
                                   "00" );   //system number
                //create an IDoc repository
                IDoc.Repository idocRep = JCoIDoc.createRepository("MyIDocRepository", "MyPool");
                //create a new and empty MATMAS02 document
                System.out.print("Creating IDoc...");
         Line where it shows error
                IDoc.Document doc = JCoIDoc.createDocument(idocRep, "ISU_MR_UPLOAD01");
                //get the root segment from the document
                //The root segment does not contain any fields or data. It is only
                //used as the standard parent segment and won't be transmitted when
                //the document is sent to an SAP system.
                IDoc.Segment segment = doc.getRootSegment();
                //create and add a new and empty child segment of type E1MARAM
                //and fill the segment data

    Seems like the error is because the user passed through the JCO call does not have the necessary authorizations...in SAP. Trace the authorizations for that user and grant what is needed... in particular the functions about the IDOC setup and structure used by the repository...
    Enjoy

  • IDOC ISSUE-10/10 POINTS ASSIGNED

    Hi all
    I m facing problem to upload data through idoc.the scenario is like we receive electric meter reading in flat file format. And to upload that data JAVA code is written which will create an IDOC FILE this authorization is only give to 2-3 person in organization and to basis guy also as user changed it’s password in SAP and in JAVA the java code is not going to create the IDOC file and data is not going to upload. after changing user password in sap system ,user not able to upload the data.
    ISU_MR_UPLOAD01 is the idoc file generated. So is there any authorization issue, password issue how to see and view IDOC IN SAP, can any one help me out into this.
    The error with java throws is as;
    1ST ERROR IN TRACE FILE
    ERROR file opened at 20061109 133610 India Standard, SAP-REL 640,0,59 RFC-VER 3  MT-SL
    T:2736 ======> User TR has no RFC authorization for function group SYST .
    T:2736 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
    2ND ERROR ON COMMAND PROMT
    C:\j2sdk1.4.2_07>cd bin
    C:\j2sdk1.4.2_07\bin>java sandsupload
    Creating IDoc...Exception in thread "main" com.sap.mw.idoc.IDoc$Exception: (2) I
    DOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ISU_MR_UPLOAD01
    " is unavailable.
            at com.sap.mw.idoc.jco.JCoIDoc$JCoDocument.<init>(JCoIDoc.java:233)
            at com.sap.mw.idoc.jco.JCoIDoc$JCoDocument.<init>(JCoIDoc.java:187)
            at com.sap.mw.idoc.jco.JCoIDoc.createDocument(JCoIDoc.java:10521)
            at sandsupload.main(sandsupload.java:35)
    the part of java code
    try {
                //create a JCo client pool
                JCO.addClientPool( "MyPool",    //pool name
                                   3,           //maximum pool connections
                                   "333",       //SAP client
                                   " TR",    //user ID
                                   " XYZ",  //password
                                   "EN",        //language
                                   " 1.1.1.1   ", //app server host name
                                   "00" );   //system number
                //create an IDoc repository
                IDoc.Repository idocRep = JCoIDoc.createRepository("MyIDocRepository", "MyPool");
                //create a new and empty MATMAS02 document
                System.out.print("Creating IDoc...");
         Line where it shows error
                IDoc.Document doc = JCoIDoc.createDocument(idocRep, "ISU_MR_UPLOAD01");
                //get the root segment from the document
                //The root segment does not contain any fields or data. It is only
                //used as the standard parent segment and won't be transmitted when
                //the document is sent to an SAP system.
                IDoc.Segment segment = doc.getRootSegment();
                //create and add a new and empty child segment of type E1MARAM
                //and fill the segment data

    Hello,
    If the IDoc is creaetd in systen with error or with anty status,you can view it via we02 transaction.
    But if it's autorisation issue,i guess IDoc will not get created.
    Thanks.

  • Regarding Idoc issue

    Hi Folks,
    I have triggered the Idoc from R/3 to XI.
    For the statue 30: I can see the text as:
    Receiver exists , No filters , No conversion , No version change
    Please let me know the meaning of this.
    can we use any code page conversion parameter in ALE to convert the data.
    Issue is like:
    In the Idoc I am getting the data correctly. But when the Idoc sent to XI with the help of batch run it went with some invalid character set. (I have checked inbound message payload in XI)
    I have re-triggered the same Idoc manually using the logon language as chenese and now it went to XI with the correct Chinese character set.
    Please guide me why it is transferred to Xi with Invalid data for the first time ?
    Thanks,
    SPMD.

    Hi ,
    I will explain you oit clearly.We are sending idoc to XI.
    we have 2 cases here:
    1st case:
    Idoc triggered for the first time and in data segements we can see the data as:
    name : ³£ÖÝÊа²½°Ù»õÓÐÏÞ¹«Ë¾ --this is in data segment.
    In XI (Inbound payload) we see the same data:   (Inbounb payload )
    My doubt is when the same idoc triggered for the first time the data conversion is not done and when the same Idoc is triggered manually the data conversion happend and we se the correct data in chinese format.
    Appreciate your help.
    Thanks,
    SPMD

Maybe you are looking for