IDOC:Master Data Records are not going to be updated after posting the IDOC

I need to create employee Master data records in R/3 .I am using the IDOC HRMD_A07, though the IDOC posting is successful no tables, corresponding to employee master Data are getting updated,
Can anybody plz Let me know the possible reasons and solutions for this?
Thanks in Advance,
Sandhya

hi i hecked the job log entries in SM37 in source system, the idocs were returned with '0' records. i took the Idoc number and checked in BD87 it displays some logs in that one node shows the red status with the detail as follow IDoc entries in tRFC queue 3383
the next one is green Data passed to port OK 1
i selected the red staus node and clicked 'process' button but it displays as
The operation cannot be carried out with this node type
wht should i do now, wht may be the reason for the datasource not pulling the data from R/3 to BI?

Similar Messages

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

Error oocuring after posting the IDOC

Hi
i am getting a error in a scenario
the scenario is Idoc to file. when we post the IDoc, its getting posted successfully. but the pipiline is getting failed at the inbound message when monitoring in SXMB_MONI.
i am getting the following error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIAdapter</SAP:Category><SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
<SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/>
<SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server
</SAP:Stack><SAP:Retry>N</SAP:Retry></SAP:Error>
all the experts help me out in solving this issue

Hi Deepika,
their might be some problems with ur ALE settings.
Here is a detail of the steps to be followed.
Do verify whether u have done the steps or repeat the steps as stated:
Steps for ALE settings:-
Steps for XI
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the R3 system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto IDX1.
 Create a new port.
 Give the port name.
 Give the client number for the R3 system.
 Select the created Rfc Destination.
Step 3)
 Goto IDX2
 Create a new Meta data.
 Give the Idoc type.
 Select the created port.
Steps for R3.
Step 1)
 Goto SM59.
 Create new RFC destination of type 3(Abap connection).
 Give a suitable name and description.
 Give the Ip address of the XI system.
 Give the system number.
 Give the gateway host name and gateway service (3300 + system number).
 Go to the logon security tab.
 Give the lang, client, username and password.
 Test connection and remote logon.
Step 2)
 Goto WE21.
 Create a port under transactional RFC.(R3->XI)
 Designate the RFC destination created in prev step.
Step 3)
 Goto SALE.
 Basic settings->Logical Systems->Define logical system.
 Create two logical systems(one for XI and the other for R3)
 Basic settings->Logical Systems->Assign logical system.
 Assign the R3 logical system to respective client.
Step 4)
 Goto WE20.
 Partner type LS.
 Create two partner profile(one for XI the other for R3).
 Give the outbound or inbound message type based on the direction.
Step 5)
 Goto WE19
 Give the basic type and execute.
 fill in the required fields.
 Goto IDOC->edit control records.
 Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
 Click outbound processing.
Step 6)
 Go to SM58
 if there are any messages then there is some error in execution.
 Goto WE02.
 Check the status of the IDOC.
 Goto WE47.
 TO decode the status code.
Step 7)
 Not mandatory.
 Goto BD64.
 Click on Create model view.
 Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)

Payroll Idocs- Master Data Export - US( PC00_M10_OTEM )

Hi,
I have one issue with the IDocs created by Master Data Export- US Program.
Program Name : RPCEMDU0_CALL
Tcode : PC00_M10_OTEM
The Idoc's which are being created by this program having some wrong values for Benefit Infotypes.
Can anyone help me to know how the Idoc's are created and where the Idoc segments are getting filled with the data in this Program?
I have debugged the program but did't get any clues.
Thanks in Advance.
Regards,
Sudhakar.

Hello,
I have some helpful information.
The program that creates the IDOC is RPCOTM** where ** is your country version.
The results of the OTSEL feature are checked in RPCOMF** and then the routine FILL_DATES(RPCOTFX0) is called to write the IDOC.
Debugging in this area will tell you...
1. Is the OTSEL value for IT0041 set
2. Was there a change in the dates for your period
3. What is being written to the IDOC
Best of Luck
Dan Reeves

How to get master data records that do not have transaction data in a query

Hi,
How to get master data records that do not have transaction data in a query output. Can we create a query or any other way to get the master data records that do not have transaction data?

Hi,
Create a multiprovider which includes transactional data target and master data info object. Make sure that identification for this master data info object is ticked on both the provider.
Create report on this multiprovider , keep the master data info object in rows , and now you should able to see all the values which are there in master data info object irrespective of transaction happened or not .
Next you may create condition showing only zero keyfigure values , ie. master data without any transaction.
Hope that helps.
Regards
Mr Kapadia

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists. Can you assist?

drjil,
It is possible that the subscription is not valid or up-to-date.
If you are looking for U.S. Holidays, here are three alternative choices besides Apple - Downloads - iCal Calendars - US Holiday Calendar.
1. Welcome to iCalShare
2. iCal World - Holiday Calendars by Country
3. US Federal Holidays, ICS format, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015.

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
 a.[Remote Key] : Checks the current source rec with
 repository along with all the fields - This is
 default
 b.Remove [Remote key] - by double click the same; and
 choose any single fields like Vendor Number or
 name - Then the current record will be matched
 with the repository based on the field.
 c.Instead of single field you can choose combination
 also.
3. Based on the Match results, match class will be set
 automatically;
 a. None
 b. Single
 c. Multiple
4. Then Match Type
 a.Exact-All the individual value matches are Equal.
 b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
 c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

DNS records are not 100% correct

For a while now we've been noticing that some DNS records are not correct. The records are pointing to incorrect IP addresses. One by one I open the record, update the IP, then replicate across all domain controllers.
What would cause the hostname of one machine to point to another IP address?

I believe what you're seeing is from DHCP-DNS registration. You may have duplicates, or incorrect data for records that can't be updated by DHCP service or the DHCP client due to permissions on the record. You may also not have scavenging in place.
In summary:
Configure DHCP Credentials. The credentials only need to be a plain-Jane, non-administrator, user account. But give it a really strong password.
Set DHCP to update everything, whether the clients can or cannot.
Set the zone for Secure & Unsecure Updates. Do not leave it Unsecure Only.
Add the DHCP server(s) to the Active Directory, Built-In DnsUpdateProxy security group. Make sure ALL other non-DHCP servers are NOT in the DnsUpdateProxy group. For example, some believe that the DNS servers or other DCs not running DHCP should be in it.
They must be removed or it won't work. Make sure that NO user accounts are in that group, either. (I hope that's crystal clear - you would be surprised how many will respond asking if the DHCP credentials should be in this group.)
On Windows 2008 R2 or newer, DISABLE Name Protection.
If DHCP is co-located on a Windows 2008 R2 or Windows 2012 DC, you can and must secure the DnsUpdateProxy group by running the following:
dnscmd /config /OpenAclOnProxyUpdates 0
Configure Scavenging on ONLY one DNS server. What it scavenges will replicate to others anyway. Set the scavenging NOREFRESH and REFRESH values combined to be equal or greater than the DHCP Lease length.
For specifics and step by steps, and good discussions on what's going on in the background and what to expect:
DHCP Service Configuration, Dynamic DNS Updates, Scavenging, Static Entries, Timestamps, DnsUpdateProxy Group, DHCP Credentials, prevent duplicate DNS records, DHCP has a "pen" icon, and more...
http://msmvps.com/blogs/acefekay/archive/2009/08/20/dhcp-dynamic-dns-updates-scavenging-static-entries-amp-timestamps-and-the-dnsproxyupdate-group.aspx
Good summary
How Dynamic DNS behaves with multiple DHCP servers on the same Domain?
http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/e9d13327-ee75-4622-a3c7-459554319a27
Another good Summary:
Thread: "DNS problem" December 18, 2013
http://social.technet.microsoft.com/Forums/windowsserver/en-US/37b8b6b3-6cb1-496c-8492-09ded13bab18/dns-problem?forum=winserverNIS
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

SapErrorMessage=Inconsistent IDocs passed: Data records or control records

Dear Friends
I am not a basis guy but am doing that work, since we don't have any basis admin in our company. One of our clients using our server in the lab is doing some testing of sending IDOCs from one server to another and are getting the following error message
SapErrorMessage=Inconsistent IDocs passed: Data records or control records missing..
AdapterErrorMessage=Error occurred while calling function module "INBOUND_IDOC_PROCESS" in R/3
Is there any log files or some thing that I can see to get more info on this problem. I don't know where the log files related to this kind of problems get stored. Any feedback will be highly appreciated.
Thanks
Ram

Hi,
thanks all for your help, great progress has been made!
There was no idoc record in sap as the document had not made it that far
A large part of the problem was my lack of understanding of sap versioning. My previous understanding was that you had a major version of the document: ORDERS01, ..., ORDERS05 and each of these have a version that relates to the software version, e.g. 47, 62, 64 etc.. which appears in the control record.
So I apparently have:
ORDERS05 64 V2
ORDERS05 64 V3
Can anyone explain this versioning model?
I would assume that V3 is the newer version but ...
thanks and regards
m

All Records are not getting displayed in adobe form from table

Hi All,
I Want to display records from table to Adobe Form Table .
But While Displaying only some of the records are getting displayed How can i display all the records in next pages of adobe form.
Its Urgent PLZ Reploy soon.
Thanks & Regards
Kiran

dear friend,
please check the adobe format, must be match to
the data base format.
pls go to the setting and adjust the data base table.
if nothing is going click the radio button
html format.
that will work.
rewards are expecting.
vivek

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Error: IDoc XML data record

Hi all,
 We have file->XI->idoc scenario and the problem we are facing is like, when the idoc structure is prepared using XSLT mapping, when the idoc is ready to get in thru the idoc adapter we are getting the following error.
Error: IDoc XML data record: In segment
Z1UKGAS_HEADR attribute occurred instead of SEGMENT 
Anyone faced the same issue....if so pls do throw some light into this issue....
We r in XI 3.0 SP13...
Thanks & regards,
Jayakrishnan

Hi,
In an IDOC structure segment attribute is requried. From the error you posted, it looks like seqment attribute is missing.
<Z>
 <IDOC BEGIN="">
 <ED SEGMENT="">
 </ED>
 </IDOC>
</Z>
Naveen

Records are not showing

what is wrong with this code? it is not showing my 7 records.
the output is this [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/output01.jpg]
when i use the debugger, intenal table is empty. [LINK|http://i338.photobucket.com/albums/n440/googleb0y/album1/debug01.jpg]
where did i go wrong? thanks for the help.
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.

Ur problem is with the select statement...
data: begin of WA,
        MYUID       type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into corresponding fields of table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
When u use corresponding fields of addition SAP searches for same field names in table itab but u declare ur table with diff. field names..thats why these records are not entered into the table..as same field names are not found in the table...so to avoid it pl. try.this code:
data: begin of WA,
        MYUID          type ZADDRESSBOOK-USERID,
        MYFNAME     type ZADDRESSBOOK-FNAME,
        MYLNAME     type ZADDRESSBOOK-LNAME,
      end of WA.
data: ITAB like table of WA.
select USERID FNAME LNAME
      from ZADDRESSBOOK
      into table ITAB.
write: / SY-DBCNT, 'records found'.
if sy-subrc eq 0.
    loop at ITAB into WA.
      write: / WA-MYUID, WA-MYFNAME, WA-MYLNAME.
    endloop.
endif.
Regards,
Joy.

Records are not displaying as expected.

Hi,
Records are not displaying as expected.
i designed an query as
SELECT '1. Emp Detail ' Details from dual
UNION ALL
SELECT empno||ename details dfrom emp
UNION ALL
SELECT '1. Dept Detail ' Details from dual
UNION ALL
SELECT deptno||dname details from dept
UNION ALL
SELECT '1. Location Detail ' Details from dual
SELECT locationcode||locationname details from location
The above query is displaying the data as follow
EMP Detail
Dept Detail
Location Details
John
Kathy
Prem
IT
Customer care
Boston
Texas
but i need to display the data as follows
EmpDetail
JOHN
Kathy
Prem
Dept Detail
IT
Customer care
Location Detail
Boston
Texas
Please help me on this.
Thanks,
Naz

Records are not displaying as expected.Well, it certainly displays as I'd expect it to. i.e. in an undetermined order.
If you want the output of a query to come out in a specific order then you must use an ORDER BY clause in your query, otherwise you are just querying a set of data and there is no order to it. You cannot assume that the order of the data will be the order in which you union your queries together, that's not how SQL works, as SQL is designed to work on sets of data, not on sequential rows.
So, in your example you would want something along the lines of:
select Details from (
SELECT 1 as ord, '1. Emp Detail ' Details from dual UNION ALL
SELECT 2, empno||ename details dfrom emp UNION ALL
SELECT 3, '1. Dept Detail ' Details from dual UNION ALL
SELECT 4, deptno||dname details from dept UNION ALL
SELECT 5, '1. Location Detail ' Details from dual UNION ALL
SELECT 6, locationcode||locationname details from location
order by ord, details

Records are not inserted into MTL_TXN_REQUEST_HEADERS,MTL_TXN_REQUEST_LINES

Hi all,
I am doing pick release thru API.
For that , I have run following API successfully but my problem is that records are not inserted into MTL_TXN_REQUEST_HEADERS , MTL_TXN_REQUEST_LINES
tables so that I cannot generate the move order. Can anyone suggent the valuable tips for that ?
1. WSH_DELIVERIES_PUB.create_update_delivery
2. WSH_DELIVERY_DETAILS_PUB.Detail_to_Delivery
3. WSH_PICKING_BATCHES_PUB.CREATE_BATCH
4. WSH_PICKING_BATCHES_PUB.RELEASE_BATCH
5. WSH_DELIVERIES_PUB.Delivery_Action ( for p_action_code = 'PICK-RELEASE' )
regards with thanks in advance
sanjay

Hi All,
To create a Move Order Header & Line Record in MTL_TXN_REQUEST_HEADERS and MTL_TXN_REQUEST_LINES tables , I have run an seeded
procedure : CreateMoveOrderHeader & CreateMoveOrderLines .
The procedure : CreateMoveOrderHeader was run successfully but when I am going to run procedure : CreateMoveOrderLines , it is giving
an error .
Following Error text I am receiving at the time of running of procedure : CreateMoveOrderLines .
Initialized applications context: 5707 50138 660
*==========================================================*
Calling INV_MOVE_ORDER_PUB.Create_Move_Order_Lines API
*==========================================================*
Return Status: E
Error Message :INV
*==========================================================*
From the above error message, no specific error is received . Only " Error Message : INV " is received hence it is very difficult to judge & resolve an error .
Can anyone guide me that what is an error ? For what reason I am getting an error ?
regrads
Sanjay

IDOC:Master Data Records are not going to be updated after posting the IDOC

Similar Messages

Maybe you are looking for