IDOC: Material master data views
I create a material with an IDOC. The IDOC only contains basic data (i.e: segments E1MARAM and E1MAKTM).
However when I look at the material in MM03, I see all the data views.
Is this do to missing config in SPRO -> Material master configuration
I just want views that have data from IDOC
Hi,
You can check the partner profile for that partner.As my understanding in your case reduced idoc is created and that is used in the partner profile.May be that reduced idoc contains only the basic data segment only.
Thanks and regards,
shyla
Similar Messages
-
ALE: IDOC material master data
I created a reduced material idoc type with only segment:
E1MARAM, E1MAKTM, E1MARCM and E1MBEWM and I select a handfull of fields in each segment.
I only want views BASIC 1 & 2, Classification , Plant Stock and Label.
I get additional views that I don't need, how do I configure to get only views I want based on data in IDocShyla,
I did that. And the IDOCs are being sent successfully.
The problem is that when I look at the generated material, all the views are created when I only specified data for basic views in IDOC. -
MM - Material master data - move standard field to another view
Hi everyone,
ÉCC 6.0 - release 7.0.
I've been adding many custom fields in Material master data MM01/02/03. Now I got a problem because we have to use a standard field in another view.
The field MARA-HERKL is set up to 'SV'(attribute V_130F-PSTAT):
Warehouse management = S
Sales = V
I want to add 'K - Basic data' in this field's attribute at OSMR Tcode , but this attribute is disactivated. I can not change this value.
I've check this note 306966 that mention: You cannot create new entries and delete entries in client 000. This client contains only the entries delivered by SAP which are used for distinguishing customer-specific fields and SAP standard during the maintenance of the other clients.
Is there any problem whether I delete this field and afterwards create it with the new values?
I'm not in client 000. So, I want to just make sure I will do a legal change.
thank you in advance,
AlexandreNone tips, Closed.
-
Transfer of material master data with Classification view
Dear Experts
I want to transfer material master data between R/3 using ALE. We are able to send master data using BD10 without classification view.
Please let me know in detail the configuration, steps invloved in sending materail master along with classification view.
Regards
SamalHAI FRIENDS,
CHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
->CREATE CHARACTERISTIC USING TCODE CT04
->CREATE CLASS USING TCODE CL01 .
-> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
OBJECTKEY = P_MATNR.
OBJECTTABLE = 'MARA'.
CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = OBJECTKEY
OBJECTTABLE = OBJECTTABLE
CLASSNUM = CLASSNUM
CLASSTYPE = CLASSTYPE
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
RETURN = RETURN
LOOP AT RETURN.
WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
BY VENKATESWARAREDDY D
MYTEC SOFT LTD -
How to delete MRP view data after create in Material master data ?
Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand -
Material Master Data purchasing view
Hi, All,
I have question on material master data purchasing view. There are 2 indicators.
One is 'automatical purchase order', what effect if I tick this box? Another is 'Source List', what effect if I tick this box?
Thanks for your answer in advanceDefines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
Use
If this indicator is flagged, the system does not display the purchase orders on the screen before they are saved.
Dependencies
In the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
If the source list is ticked, system expects a source list for the material with a vendor and it will not allow to create PO giving a error message,source not included despite of source list requirement if it is not created.
Regards, -
Copy Material Master data - cannot copy "Proportion/Prod.Unit" view
Hello,
When I try to create material master data using the "Copy from..." option, data from the "Proportion/Prod.Unit" view is not copied to the new material. We are using SAP for Mill products.
Any clues?
Regards,
JoaoHello Joao,
There are two things, which have to be done :
The first thing of course is, that for the field MARA-KZWSM the field
"Propose Field Content from the Reference" must be set in transaction
OMSR.
The second is, that the user have to enter this screen, because if he
don't display this screen, then it is technically not possible to
copy the reference values.
(To copy this data from the reference material you have to go to the
subscreen SAPLMWSM 8030 and press enter).
Regards,
Mauro -
IDOC: Material master (Extend Plants)
I used LSMW IDOC option to migrate material master data (MATMAS):
- Basic views
- Description
- Costing
- Plant Stock
I want to extend the plant view (Plant Stock). What change do I do to original LSMW to extend plant?
How do I specify that I am extending?
Is it that function code at the beginning of IDOC?You can do this by writing a program:
REPORT zdmmm_mm_multiplant NO STANDARD PAGE HEADING
MESSAGE-ID zdmmm
LINE-SIZE 255.
TABLE DECLARATION *
TABLES: mara, "General Material Data
mard, "Storage location data
mdma, "MRP data for material
marc. "Plant Data for Material
include zdmmmr_dev00160_mm_multi_top.
include zdmmmr_dev00160_mm_multi_f00.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF NOT s_matnr[] IS INITIAL.
*Subroutine to perform the Material Number validation
PERFORM sub_validate_matnr.
ELSEIF p_ersda IS INITIAL.
MESSAGE e003 .
ENDIF.
IF NOT s_werks[] IS INITIAL.
Subroutine to perform the plant validation
PERFORM sub_validate_plant.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*To retrive all possible material numbers that have to be
*extended.
PERFORM sub_get_mara.
*To retrieve all possible plants to which the material needs
*to be extended.
IF s_werks IS INITIAL.
PERFORM sub_get_werks.
ENDIF.
*For retrieving Procurement status data from T134.
PERFORM sub_get_pstat.
*To determine the plants to which the Materials have
*already been extended.
PERFORM sub_get_marc.
*To determine all Storage Locations for individual Plants.
PERFORM sub_get_t001l.
*To retrieve company code
PERFORM sub_get_t001k.
*To determine the storage locations and plants to which the Material
*has already extended.
PERFORM sub_get_mard.
*To determine the MRP Areas to which the materials need to be extended.
PERFORM sub_get_mdlv.
*To determine the MRP Areas to which the materials already been extended.
PERFORM sub_get_mdma.
*To retrieve the MRP Area related data from customized table.
PERFORM sub_get_zdmmm_mrp_area.
*TO retrieve the Scalabilty info
PERFORM sub_get_scalability.
*For extending Material to Plant, all possible Storage Location and corresponding MRP Area .
PERFORM sub_mat_extn.
*For creating success and error log.
PERFORM sub_create_log.
*Text elements
001 Material/Plant Selection
002 No data found for given Selection.
003 Reference material is not maintained
004 Material is already extended to the plant
006 Material extended for MRP Area
007 Successfully extended
008 Already extended
009 Not a seviceable storage location,cannot be extended to MRP Area
*Selection texts
P_ERSDA Date
S_MATNR Material Number
S_WERKS Extend to Plant
*Messages
Message class: ZDMMM
*000 & & & &
*001 The material no. does not exist
*002 The plant does not exists.
*003 Enter either material no. or Creation date
*& Include ZDMMMR_MM_MULTI_TOP *
Types
*Type declaration to hold material no.
TYPES: BEGIN OF ty_matnr,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
ersda TYPE ersda, "Creation date
mbrsh TYPE mbrsh, "Industry Sector
vkorg TYPE vkorg, "Sales Organization
vtweg TYPE vtweg, "Distribution Channel
mtartz TYPE zmtart, "Material Type (Customized)
END OF ty_matnr.
*Type declaration to hold plant.
TYPES: BEGIN OF ty_plant,
werks TYPE werks_d, "Plant
bwkey TYPE bwkey, "Valuation area
END OF ty_plant.
*Type declaration to hold data from marc.
TYPES: BEGIN OF ty_marc,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
bwkey TYPE bwkey,
END OF ty_marc.
*Type declaration to hold data from mard.
TYPES: BEGIN OF ty_mard,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
mtart TYPE mtart, "Material Type
END OF ty_mard.
*Type declaration to hold data from t001l.
TYPES: BEGIN OF ty_sloc,
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
END OF ty_sloc.
*Type declaration to hold data from mdlv.
TYPES: BEGIN OF ty_mdlv,
berid TYPE berid, "MRP Area
werzg TYPE werks_d, "Plant
ortzg TYPE lgort_d, "Storage Location
END OF ty_mdlv.
*Type declaration to hold data from custom table ZDMMM_MRP_AREA.
TYPES: BEGIN OF ty_refmdma,
zmtart TYPE zdmmm_mrp_area-zmtart, "Material Type (Customized)
zwerks TYPE zdmmm_mrp_area-zwerks, "Plant
zberid TYPE zdmmm_mrp_area-zberid, "MRP Area
zdismm TYPE zdmmm_mrp_area-zdismm, "MRP Type
zeisbe TYPE zdmmm_mrp_area-zeisbe, "Safety Stock
zdisls TYPE zdmmm_mrp_area-zdisls, "Lot Size
zdispo TYPE zdmmm_mrp_area-zdispo, "MRP Controller
zfxhor TYPE zdmmm_mrp_area-zfxhor, "Plant Delivery Time (In days)
END OF ty_refmdma.
*Type declaration to hold data for success log.
TYPES: BEGIN OF ty_succ,
mat(18) TYPE c, "Material
plant(8) TYPE c, "Plant
sloc(15) TYPE c, "Storage Location
comm(150) TYPE c, "Comments
END OF ty_succ.
*Type declaration to hold data for error log.
TYPES: BEGIN OF ty_error,
mat(18) TYPE c, "Material
plant(8) TYPE c, "Plant
sloc(15) TYPE c, "Storage Location
comm(150) TYPE c, "Comments
END OF ty_error.
*Type declaration for holding data from mvke
TYPES: BEGIN OF ty_mvke,
matnr TYPE matnr, "Material Number
vkorg TYPE vkorg, "Sales Org
vtweg TYPE vtweg, "Distribution Channel
END OF ty_mvke.
*Type declaration for holding data from qmat
TYPES: BEGIN OF ty_qmat,
matnr type matnr,
werks type werks_d,
art TYPE qmat-art,
ppl TYPE qmat-ppl,
spezueber TYPE qmat-spezueber,
conf TYPE qmat-conf,
tls TYPE qmat-tls,
app TYPE qmat-app,
mer TYPE qmat-mer,
insmk TYPE qmat-insmk,
ave TYPE qmat-ave,
stichprver TYPE qmat-stichprver,
dynregel TYPE qmat-dynregel,
sproz TYPE qmat-sproz,
hpz TYPE qmat-hpz,
dyn TYPE qmat-dyn,
mpb TYPE qmat-mpb,
mst TYPE qmat-mst,
ein TYPE qmat-ein,
mpdau TYPE qmat-mpdau,
chg TYPE qmat-chg,
qkzverf TYPE qmat-qkzverf,
qpmat TYPE qmat-qpmat,
kzprfkost TYPE qmat-kzprfkost,
aufnr_co TYPE qmat-aufnr_co,
aktiv TYPE qmat-aktiv,
apa TYPE qmat-apa,
afr TYPE qmat-afr,
mma TYPE qmat-mma,
feh TYPE qmat-feh,
prfrq TYPE qmat-prfrq,
nkmpr TYPE qmat-nkmpr,
END OF ty_qmat.
*Type declaration for MARA and MARC data for reference material
TYPES: BEGIN OF ty_ref_data,
matnr TYPE matnr, "Material Number
ladgr TYPE ladgr, "Loading Group
bklas TYPE bklas, "Valuation class
peinh TYPE peinh, "Price unit
losgr TYPE losgr, "Costing Lot Size
hkmat TYPE hkmat, "Material Origin
herkl TYPE herkl, "Country Of Origin
dismm TYPE dismm, "MRP Type
dispo TYPE dispo, "MRP Controller
fxhor TYPE fxhor, "Planned delivery time (In days)
disls TYPE disls, "Lot size
fhori TYPE fhori, "Scheduling Margin Key for Floats
magrv TYPE magrv,
vhart TYPE vhart,
ergew TYPE ergew,
ervol TYPE ervol,
fuelg TYPE fuelg,
stfak TYPE stfak,
gewto TYPE gewto,
volto TYPE volto,
prctr TYPE prctr,
kzgvh TYPE kzgvh,
stawn TYPE stawn,
mtver TYPE mtver,
casnr TYPE casnr,
gpnum TYPE gpnum,
steuc TYPE steuc,
herkr TYPE herkr,
mownr TYPE mownr,
mogru TYPE mogru,
prenc TYPE prenc,
preno TYPE preno,
prend TYPE prend,
itark TYPE itark,
bstme TYPE bstme,
vabme TYPE vabme,
nrfhg TYPE nrfhg,
mfrgr TYPE mfrgr,
ekwsl TYPE ekwsl,
webaz TYPE webaz,
insmk TYPE insmk,
kzkri TYPE kzkri,
usequ TYPE usequ,
kordb TYPE kordb,
mprof TYPE mprof,
ekgrp TYPE ekgrp,
disgr TYPE disgr,
maabc TYPE maabc,
minbe TYPE minbe,
lfrhy TYPE lfrhy,
bstmi TYPE bstmi,
bstma TYPE bstma,
bstfe TYPE bstfe,
mabst TYPE mabst,
losfx TYPE losfx,
lagpr TYPE lagpr,
ausss TYPE ausss,
takzt TYPE takzt,
rdprf TYPE rdprf,
bstrf TYPE bstrf,
megru TYPE megru,
sobsl TYPE sobsl,
kzech TYPE kzech,
lgpro TYPE lgpro,
vspvb TYPE vspvb,
rgekz TYPE rgekz,
lgfsb TYPE lgfsb,
fabkz TYPE fabkz,
eprio TYPE eprio,
schgt TYPE schgt,
plifz TYPE plifz,
mrppp TYPE mrppp,
eisbe TYPE eisbe,
lgrad TYPE lgrad,
eislo TYPE eislo,
rwpro TYPE rwpro,
shflg TYPE shflg,
shzet TYPE shzet,
shpro TYPE shpro,
periv TYPE periv,
auftl TYPE auftl,
strgr TYPE strgr,
vrmod TYPE vrmod,
vint2 TYPE vint2,
umref TYPE umref,
prgrp TYPE prgrp,
vint1 TYPE vint1,
miskz TYPE miskz,
prwrk TYPE prwrk,
mtvfp TYPE mtvfp,
wzeit TYPE wzeit,
kzpsp TYPE kzpsp,
stdpd TYPE stdpd,
perkz TYPE perkz,
altsl TYPE altsl,
kausf TYPE kausf,
sbdkz TYPE sbdkz,
kzbed TYPE kzbed,
ahdis TYPE ahdis,
kzaus TYPE kzaus,
ausdt TYPE ausdt,
nfmat TYPE nfmat,
sauft TYPE sauft,
sfepr TYPE sfepr,
mdach TYPE mdach,
dplfs TYPE dplfs,
dplpu TYPE dplpu,
dplho TYPE dplho,
tempb TYPE tempb,
raube TYPE raube,
behvo TYPE behvo,
stoff TYPE stoff,
abcin TYPE abcin,
ccfix TYPE ccfix,
wesch TYPE wesch,
etiar TYPE etiar,
etifo TYPE etifo,
xgchp TYPE xgchp,
maxlz TYPE maxlz,
lzeih TYPE lzeih,
mhdrz TYPE mhdrz,
mhdhb TYPE mhdhb,
iprkz TYPE dattp,
rdmhd TYPE rdmhd,
mhdlp TYPE mhdlp,
brgew TYPE brgew,
ntgew TYPE ntgew,
volum TYPE volum,
voleh TYPE voleh,
groes TYPE groes,
xmcng TYPE xmcng,
loggr TYPE loggr,
sernp TYPE serail,
serlv TYPE serlv,
fprfm TYPE fprfm,
ausme TYPE ausme,
qmata TYPE qmatauth,
kzdkz TYPE kzdkz,
prfrq TYPE prfrq,
rbnrm TYPE rbnr,
qmpur TYPE qmpur,
ssqss TYPE ssqss,
qzgtp TYPE qzgtyp,
qssys TYPE qssys,
bwtty TYPE bwtty,
eklas TYPE eklas,
qklas TYPE qklas,
verpr TYPE verpr,
stprs TYPE stprs,
zkprs TYPE dzkprs,
zkdat TYPE dzkdat,
bwprs TYPE bwprs,
bwprh TYPE bwprh,
bwps1 TYPE bwps1,
bwph1 TYPE bwph1,
vjbws TYPE vjbws,
vjbwh TYPE vjbwh,
abwkz TYPE abwkz,
bwpei TYPE bwpei,
xlifo TYPE xlifo,
mypol TYPE mypool,
ncost TYPE ck_no_costing,
ekalr TYPE ck_ekalrel,
hrkft TYPE hrkft,
kosgr TYPE ck_kosgr,
awsls TYPE awsls,
mmsta TYPE mmsta,
mmstd TYPE mmstd,
stlal TYPE stlal,
stlan TYPE stlan,
plnnr TYPE plnnr,
aplal TYPE plnal,
plnty TYPE plnty,
sobsk TYPE ck_sobsl,
zplpr TYPE dzplpr,
zplp1 TYPE dzplp1,
zpld1 TYPE dzpld1,
zplp2 TYPE dzplp2,
zpld2 TYPE dzpld2,
zplp3 TYPE dzplp3,
zpld3 TYPE dzpld3,
lvolg TYPE lvolg,
diskz TYPE diskz,
lsobs TYPE lsobs,
lminb TYPE lminb,
lbstf TYPE lbstf,
lgpbe TYPE lgpbe,
END OF ty_ref_data.
*Type declaration for holding data from mdma
TYPES: BEGIN OF ty_mdma,
matnr TYPE mdma-matnr, "Material Number
berid TYPE mdma-berid, "MRP Area
werks TYPE mdma-werks, "Plant
END OF ty_mdma.
*Type declaration for holding Company code data
TYPES: BEGIN OF ty_bukrs,
bwkey TYPE bwkey, "Valuation Area
bukrs TYPE bukrs, "Company code
END OF ty_bukrs.
*Type declaration for holding T001w Data
TYPES: BEGIN OF ty_t001w,
werks TYPE werks_d, "Plant
bwkey TYPE bwkey, "Valuation Area
END OF ty_t001w.
*Type declaration for holding T134 Data
TYPES: BEGIN OF ty_t134,
mtart TYPE mtart, " Material type
pstat TYPE pstat, "Condensed status display
END OF ty_t134.
Type declaration for Holding TWLAD data
TYPES: BEGIN OF ty_twlad,
werks TYPE werks_d,
lgort TYPE lgort_d,
adrnr TYPE adrnr,
END OF ty_twlad.
*Type declaration for holding ADRC data
TYPES: BEGIN OF ty_adrc,
adrnr TYPE adrnr, "Address number
sort2 TYPE ad_sort2, "Search Term
END OF ty_adrc.
TYPES: BEGIN OF ty_dev00160,
pkey TYPE zkey, "parameter key
item TYPE zitem, "Item No
value TYPE zvalue,
END OF ty_dev00160.
Constants
CONSTANTS: c_header(1) TYPE c VALUE 'H', "Header
c_true(1) TYPE c VALUE 'X', "value = x
c_v(1) TYPE c VALUE 'V', "Sales View
c_e(1) TYPE c VALUE 'E', "Purchasing View
c_d(1) TYPE c VALUE 'D', "MRP View
c_p(1) TYPE c VALUE 'P', "Forecasting View
c_a(1) TYPE c VALUE 'A', "Work Scheduling view
c_l(1) TYPE c VALUE 'L', "Storage View
c_q(1) TYPE c VALUE 'Q', "Quality View
c_b(1) TYPE c VALUE 'B', "Accounting
c_g(1) TYPE c VALUE 'G', "Costing View
c_f(1) TYPE c VALUE 'F', "PRT View
c_k(1) TYPE c VALUE 'K'. "Basic View
Internal tables
*Internal table to hold material no and material type
DATA: i_matnr TYPE STANDARD TABLE OF ty_matnr INITIAL SIZE 0.
*Internal table to hold plant
DATA: i_plant TYPE STANDARD TABLE OF ty_plant INITIAL SIZE 0.
*Internal table to hold marc data
DATA: i_marc TYPE STANDARD TABLE OF ty_marc INITIAL SIZE 0.
*Internal table to hold marc data
DATA: i_tmarc TYPE STANDARD TABLE OF ty_marc INITIAL SIZE 0.
*Internal table to hold mard data
DATA: i_mard TYPE STANDARD TABLE OF ty_mard INITIAL SIZE 0.
*Internal table to hold t001l data
DATA: i_sloc TYPE STANDARD TABLE OF ty_sloc INITIAL SIZE 0.
*Internal table to hold MRP Area
DATA: i_mdlv TYPE STANDARD TABLE OF ty_mdlv INITIAL SIZE 0.
*Internal table to hold already extended MRP Area
DATA: i_mdma TYPE STANDARD TABLE OF ty_mdma INITIAL SIZE 0.
*Internal table to hold MRP Area data from customized table
DATA: i_refmdma TYPE STANDARD TABLE OF ty_refmdma INITIAL SIZE 0.
*Internal table to hold success messages
DATA: i_succ TYPE STANDARD TABLE OF ty_succ INITIAL SIZE 0.
*Internal table to hold error messages
DATA: i_error TYPE STANDARD TABLE OF ty_error INITIAL SIZE 0.
*Internal table to hold mvke data
DATA: i_mvke TYPE STANDARD TABLE OF ty_mvke INITIAL SIZE 0.
*Internal table for company code data
DATA: i_bukrs TYPE STANDARD TABLE OF ty_bukrs INITIAL SIZE 0.
*Internal table for T001W data
DATA: i_t001w TYPE STANDARD TABLE OF ty_t001w INITIAL SIZE 0.
*Internal table for T134 data
DATA: i_t134 TYPE STANDARD TABLE OF ty_t134 INITIAL SIZE 0.
*Internal table for TWLAD data
DATA: i_twlad TYPE STANDARD TABLE OF ty_twlad INITIAL SIZE 0.
*Internal table for ADRC data
DATA: i_adrc TYPE STANDARD TABLE OF ty_adrc INITIAL SIZE 0.
*Internal table for dev00160 data
DATA: i_dev00160 TYPE STANDARD TABLE OF ty_dev00160 INITIAL SIZE 0.
*Internal table for qmat data
DATA: i_qmat TYPE STANDARD TABLE OF ty_qmat INITIAL SIZE 0.
Work areas
*Work Area for Internal table i_mara
DATA: wa_matnr TYPE ty_matnr.
*Work Area for Internal table i_werks
DATA: wa_plant TYPE ty_plant.
*Work Area for Internal table i_marc
DATA: wa_marc TYPE ty_marc.
*Work Area for Internal table i_t001l
DATA: wa_sloc TYPE ty_sloc.
*Work Area for Internal table i_mdlv
DATA: wa_mdlv TYPE ty_mdlv.
*Work Area for Internal table i_bukrs
DATA: wa_bukrs TYPE ty_bukrs.
*Work Area for Internal table i_refmdma.
DATA: wa_refmdma TYPE ty_refmdma.
*Work Area for Internal table i_succ
DATA: wa_succ TYPE ty_succ.
*Work Area for Internal table i_error
DATA: wa_error TYPE ty_error.
*Work Area for Internal table i_selfields
DATA: wa_selfields TYPE sdibe_massfields.
*Work Area for Internal table i_mvke
DATA: wa_mvke TYPE ty_mvke.
*Work Area for Internal table i_ref_data
DATA: wa_ref_data TYPE ty_ref_data.
*Work Area for internal table I_t001w
DATA: wa_t001w TYPE ty_t001w.
*Work Area for internal table I_t001w
DATA: wa_twlad TYPE ty_twlad.
*Work Area for internal table I_t134
DATA: wa_t134 TYPE ty_t134.
WOrk Area for ADRC Table
DATA: wa_adrc TYPE ty_adrc.
WOrk Area for MARD Table
DATA: wa_mard TYPE ty_mard.
*Work Area for Internal table i_mvke
DATA: wa_dev00160 TYPE ty_dev00160.
*Work Area for Internal table i_mvke
DATA: wa_qmat TYPE ty_qmat.
SELECTION SCREEN *
SELECTION-SCREEN : BEGIN OF BLOCK b_001
WITH FRAME
TITLE text-001 . "Start of selection-screen
SELECT-OPTIONS: s_matnr FOR mara-matnr. "Material Number
PARAMETERS : p_ersda LIKE mara-ersda. "Creation Data
SELECT-OPTIONS: s_werks FOR marc-werks NO INTERVALS. "Plant
SELECTION-SCREEN : END OF BLOCK b_001 . "End of Selection-screen
*& Include ZDMMMR_MM_MULTI_F00 *
*& Form sub_validate_matnr
Subroutine for validating material number
FORM sub_validate_matnr .
SELECT matnr "Material Number
mtart "Material Type
ersda "Creation date
mbrsh "Industry Sector
FROM mara "Table for General Material Data
INTO TABLE i_matnr
WHERE matnr IN s_matnr.
*If no material is found an error message is given
IF sy-subrc <> 0.
MESSAGE e001.
ENDIF.
ENDFORM. " sub_validate_matnr
*& Form sub_validate_plant
Subroutine to validate Plant
FORM sub_validate_plant .
SELECT werks "Plant
bwkey "Valuation area
FROM t001w "Table for Plants/Branches
INTO TABLE i_plant
WHERE werks IN s_werks.
*If no plant is found an error message is given
IF sy-subrc NE 0.
MESSAGE e002.
ENDIF.
ENDFORM. " sub_validate_plant
*& Form sub_get_mara
*Determine all the materials that need to be extended to new plants,
*storage locations and MRP areas
FORM sub_get_mara .
IF NOT s_matnr[] IS INITIAL.
SORT i_matnr BY matnr.
IF p_ersda IS NOT INITIAL.
DELETE i_matnr WHERE ersda NE p_ersda.
ENDIF.
ELSE.
*If only Creation Date is given
SELECT matnr "Material No.
mtart "Material Type
ersda "Creation date
mbrsh "Industry Sector
FROM mara "Table for General Material Data
INTO TABLE i_matnr
WHERE ersda EQ p_ersda.
IF sy-subrc EQ 0.
SORT i_matnr BY matnr.
ELSE.
MESSAGE i000 WITH 'No data found for given Selection.'(002).
LEAVE LIST-PROCESSING.
ENDIF.
ENDIF.
Subroutine to get data from mvke.
PERFORM sub_get_mvke.
LOOP AT i_matnr INTO wa_matnr.
CLEAR wa_mvke.
READ TABLE i_mvke INTO wa_mvke WITH KEY matnr = wa_matnr-matnr
BINARY SEARCH.
IF sy-subrc EQ 0.
wa_matnr-vkorg = wa_mvke-vkorg.
wa_matnr-vtweg = wa_mvke-vtweg.
ENDIF.
IF wa_matnr-mtart = 'AD01'.
wa_matnr-mtartz = 'AD01'.
ELSE.
wa_matnr-mtartz = 'NAD01'.
ENDIF.
MODIFY i_matnr FROM wa_matnr TRANSPORTING vkorg vtweg mtartz.
ENDLOOP.
ENDFORM. " sub_get_mara
*& Form sub_get_werks
*Determine all the plants to which the Materials need to be extended
FORM sub_get_werks .
SELECT werks "Plant
bwkey "Valuation Area
FROM t001w "Check table for Plants/Branches
INTO TABLE i_plant.
IF sy-subrc EQ 0.
SORT i_plant BY werks.
ENDIF.
ENDFORM. " sub_get_werks
*& Form sub_get_marc
*Determine the status of the materials with respect to which plants
*they have already been extended to
FORM sub_get_marc .
CHECK i_matnr[] IS NOT INITIAL.
SELECT m~matnr "Material Number
m~werks "Plant
t~bwkey
INTO TABLE i_marc
FROM marc AS m "Table for Plant Data for Material
INNER JOIN t001w AS t
ON mwerks = twerks
FOR ALL ENTRIES IN i_matnr
WHERE matnr EQ i_matnr-matnr.
IF sy-subrc EQ 0.
*Append the plants that have been extended to
to the list of plants to which they have to be extended
only when no plants are given in the selection screen
IF s_werks IS INITIAL.
LOOP AT i_marc INTO wa_marc.
wa_plant-werks = wa_marc-werks.
wa_plant-bwkey = wa_marc-bwkey.
APPEND wa_plant TO i_plant.
CLEAR wa_plant.
ENDLOOP.
SORT i_plant BY werks bwkey.
DELETE ADJACENT DUPLICATES FROM i_plant
COMPARING werks bwkey.
ENDIF.
SORT i_marc BY matnr werks.
*Retrieve the Valutaion Area for the plants to which the material
*has already been extended.
SELECT werks "Plant
bwkey "Valuation area
INTO TABLE i_t001w
FROM t001w "Table for Plants/Branches
FOR ALL ENTRIES IN i_marc
WHERE werks = i_marc-werks.
*If selection succeed.
IF sy-subrc EQ 0.
Sort by Plant
SORT i_t001w BY werks.
ENDIF.
ENDIF.
*Copy the content of MARC into a temporary internal table
i_tmarc[] = i_marc[].
DELETE ADJACENT DUPLICATES FROM i_tmarc
COMPARING matnr.
*Retrieving Inspection type - material parameters (QMAT)
*data
SELECT matnr "Material Number
werks "Plant
art "Inspection Type
ppl "Inspection with Task List
spezueber "Inspect with Material Specification
conf "Inspection Specifications from
" Configuration
tls "Inspection Specifications from Batch
" Determination
app "Automatic Specification Assignment
mer "nspect by Characteristics
insmk "Post to Inspection Stock
ave "Automatic Usage Decision Planned
stichprver "Sampling Procedure
dynregel "Dynamic Modification Rule
sproz "Inspection Percentage
hpz "100% Inspection
dyn "Skips Allowed
mpb "Enter the Sample Manually
mst "Trigger Sample Calculation Manually
ein "Serial Number Management Possible
mpdau "Average Inspection Duration
chg "Control of Inspection Lot Creation (Lot
"Summary)
qkzverf "Procedure for Calculating Quality Score
qpmat "Allowed Share of Scrap (Percent) in
"Inspection Lot
kzprfkost "Record Appraisal Costs in Individual QM
"Order
aufnr_co "Order Number for Recording Appraisal
"Costs
aktiv "Inspection Type - Material Combination is
"Active
apa "Preferred Inspection Type
afr "Inspection for Handling Unit
mma "Field Not Used as of 3.0 Field
"Reserved for SAP
feh "Field Not Used as of 3.0 Field
"Reserved for SAP
prfrq "Field Not Used as of 3.0 Field
"Reserved for SAP
nkmpr "Field Not Used as of 3.0 Field
"Reserved for SAP
INTO TABLE i_qmat
FROM qmat "Table of "Inspection type - material
"parameters"
FOR ALL ENTRIES IN i_tmarc
WHERE matnr = i_tmarc-matnr "Material no. of temporary internal
"table
AND werks = i_tmarc-werks. "Plant of temporary internal table
*If selection succeed
IF sy-subrc EQ 0.
SORT i_qmat BY matnr.
ENDIF.
ENDFORM. " sub_get_marc
*& Form sub_get_mard
Determine the storage locations for the Plants i_plant.
FORM sub_get_mard .
CHECK i_marc[] IS NOT INITIAL.
SELECT matnr "Material Number
werks "Plant
lgort "Storage Location
FROM mard "Table for Storage Location Data for Material
INTO TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr EQ i_marc-matnr
AND werks EQ i_marc-werks.
*If selection succeed
IF sy-subrc EQ 0.
*Sort internal table by Material no , Plant and Storage Location
SORT i_mard BY matnr werks lgort .
ENDIF.
ENDFORM. " sub_get_mard
*& Form sub_get_t001l
Determine the storage locations for the Plants i_plant.
FORM sub_get_t001l .
CHECK i_plant[] IS NOT INITIAL.
SELECT werks "Plant
lgort "Storage Location
FROM t001l "Check table for Storage Location
INTO TABLE i_sloc
FOR ALL ENTRIES IN i_plant
WHERE werks EQ i_plant-werks.
*If selection succeed
IF sy-subrc EQ 0.
*Sort by Plant and Storage Location
SORT i_sloc BY werks lgort.
For all the storage location get the Storage Location Address
*Number
SELECT werks "Plant
lgort "Storage Location
adrnr "Address Number
FROM twlad "Table of 'Determination of Address from Plant and
"Storage Location'
INTO TABLE i_twlad
FOR ALL ENTRIES IN i_sloc
WHERE werks = i_sloc-werks
AND lgort = i_sloc-lgort.
*If selection succeed
IF sy-subrc EQ 0.
*Sort by Plant, Storage Location and Address number
SORT i_twlad BY werks lgort adrnr.
For all address numbers retrieved get the search term
SELECT addrnumber "Address number
sort2 "Search Term 2
INTO TABLE i_adrc
FROM adrc "Table of 'Addresses (Business Address
"Services)'
FOR ALL ENTRIES IN i_twlad
WHERE addrnumber = i_twlad-adrnr.
IF sy-subrc EQ 0.
SORT i_adrc BY adrnr.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " sub_get_t001l
*& Form sub_get_mdlv
Determine the MRP Areas to which the materials need to be extended.
FORM sub_get_mdlv .
CHECK i_sloc[] IS NOT INITIAL.
SELECT berid "MRP Area
werzg "Plant
ortzg "Receiving Storage Location
FROM mdlv "Table for Customizing MRP Area
INTO TABLE i_mdlv
FOR ALL ENTRIES IN i_sloc
WHERE werzg EQ i_sloc-werks
AND ortzg EQ i_sloc-lgort.
*If selection succeed.
IF sy-subrc EQ 0.
*Sort by Plant and Storage Location
SORT i_mard BY werks lgort.
ENDIF.
ENDFORM. " sub_get_mdlv
*& Form sub_get_zdmmm_mrp_area
Determine required fields w.r.t Plant and MRP Area from customized
*table
FORM sub_get_zdmmm_mrp_area .
CHECK i_mdlv[] IS NOT INITIAL.
*Retrieving MRP data from Customized table
SELECT zmtart "Material Type
zwerks "Plant
zberid "MRP Area
zdismm "MRP Type
zeisbe "Safety Stock
zdisls "Lot Size
zdispo "Mrp Controller
zfxhor "Planned Delivery Time (In Days)
FROM zdmmm_mrp_area "Customized table for MRP Area wrt
"plant and mat type.
INTO TABLE i_refmdma
FOR ALL ENTRIES IN i_mdlv
WHERE zberid = i_mdlv-berid
AND zwerks = i_mdlv-werzg.
*If selection succeed
IF sy-subrc <> 0.
*Sort by MRP Area and Plant
SORT i_refmdma BY zberid zwerks.
ENDIF.
ENDFORM. " sub_get_zdmmm_mrp_area
*& Form sub_mat_extn
For extending Material to Plant, all possible Storage Location and
corresponding MRP Area .
FORM sub_mat_extn .
*Local variable declaration
DATA: l_index TYPE sytabix. "For storing sy-tabix
DATA: l_counter TYPE i VALUE 0. "For formatting Error log.
DATA: l_sloc_extend TYPE c. "Flag for Extending the material
DATA: wa_dpop LIKE dpop. "For sending as a exporting
"parameter
DATA: wa_mdma LIKE mdma. "For sending as a exporting
"parameter
DATA: l_stat TYPE c. "For checking the Storage Location
"is Seviceable or not.
DATA: wa_bapireturn1 TYPE bapiret1. "Return Work area of
"'MD_MRP_LEVEL_CREATE_DATA'
*No material is selected.
CHECK i_matnr[] IS NOT INITIAL.
SORT i_plant BY werks.
SORT i_marc BY matnr werks.
SORT i_mard BY matnr werks lgort.
*For extending the material to Plant Storage Location and possible MRP
*Area
LOOP AT i_matnr INTO wa_matnr.
CLEAR wa_marc.
Checking whether Reference Material Exists or not
READ TABLE i_marc INTO wa_marc WITH KEY matnr = wa_matnr-matnr
BINARY SEARCH.
If no reference material exists..populate data for error log.
IF sy-subrc NE 0.
CLEAR wa_error.
PERFORM material_convert USING wa_matnr-matnr
CHANGING wa_error-mat.
wa_error-comm = 'Reference material is not maintained'(003).
APPEND wa_error TO i_error.
CLEAR wa_error.
CONTINUE.
ENDIF.
For retrieving the reference data
PERFORM sub_retrieve_refdata.
LOOP AT i_plant INTO wa_plant.
READ TABLE i_marc INTO wa_marc WITH KEY matnr = wa_matnr-matnr
werks = wa_plant-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
-
ALE:Material Master Data Distribution
Hi
I am new to ALE Material Master Data Distribution and if the questions are incorrectly worded, please accept my apologies. It is due to lack of knowledge.
I am doing Material Master Data distribution and I am using standard basic type MATMAS03. The standard TCode MM01, MM02 has SAP tables and 3 custom tables.
I have turned the active on using BD61 and change pointers to message type.
Q: Is the change pointer, applicable to entire material master? i.e. if I change a field in Z table or standard material tables, can an IDOC be created for the entire material record?
Q: What is the function of BD52? Does this override the option Activate Change pointers for message type? Does it mean, if the changes are made to those fields in BD52 a change pointer is created?
Q: If I change Z table only, will there be a change pointer created? If not, how could I accomplish this using BD52.
Q When do we use the enhancement MGV00001?
Also, If you could add anything in addition to above queries, it will be helpful to me and I appreciate it.
With regards,
WilliamThank you Sudhakar.
Your tips are good, but, I was not able to get the problem resolved.
Let me explain what I have done based on your tips.
1. MATMAS uses MATMAS03. The basic type has NOT been modified to have z fields yet.
2. Using BD52, i have created the following fields
MATERIAL ZEMM_MARA_TECH IM_ADVISORY_CODE
MATERIAL ZEMM_MARA_TECH KEY.
3. Modified the MMR for IM_ADVISORY_CODE.
I did not see a change pointer for this change.
Q: When I created above entry using BD52, was asking the table name. The table name is stored in TCD0B. What TCode is available the entries in TCDOB. For the time being, i created using SQL.
Q. Is there a follow up configuration required to capture the changes?
I will award the points in a couple of days time, even if I do not get the solution, because you have spent your precious time for the community. I will wait for a couple of days for other suggestions and close the Problem. -
Update material master data BAPI_MATERIAL_SAVE DATA
Hi All,
I am using BAPI_MATERIAL_SAVE DATA Fm to update the material master data .
I want to change material type vend (which already existed) to HIBE material type .
Even though Basic data view populated its not updating in Material master .
Which views do i need to populate to change material type one value to other value?if you use FM - BAPI_MATERIAL_SAVE DATA ,you can not update material type , use bdc program to update material type ,
See the transaction : MMAM - No BAPI to update material type
you need to use BDC Program.
Reward Points if it is helpful
Thanks
Seshu -
LSMW--Create Material master data
Hi,
When I use LSMW to create material master data, I set up all step, but when I go to last step "13 Run Batch Input Session", there is error message like "Select at least one view" in moudle SAPLMGMM, screen 0070, anybody can tell me what is problem, thanks a lot.Hi,
This is due to error while recording for MM01,
Please do a Repeat recording and ensure that once the material number, industry sector and material type is entered, on the next screen you need to select all or at least a single view to create the MMR.
Regards
Merwyn -
Interactive ALV to report to get into Material Master Sales View
Hi,
I want to know way to get into Material master Sales view from an Interactive ALV report.
In the output we have (custom report for Sales) the Sales Order item information. If the user double clicks on the material, it should directly goes to the Material Master Sales org 1 view. I can able to get to MM03 initial screen to display the list of views, but it would be better we can use the Plant, Sales Org and plant info from Sales Item to get into the material master Sales view.
I checked that this functionality is there in the standard code. If you double click on the material in Purchase order display(ME23N) from the item level, it is directly getting into Material Master Purchasing view. Is there a way to achieve this.
Your suggestions would be appreciated with points. Thanks!Hello,
Yes, it's possible using the CALL TRANSACTION command with the addition AND SKIP FIRST SCREEN. The only thing that you need is to fill the fields from the first screen (SET PARAMETER command).
DATA: carrid TYPE spfli-carrid,
connid TYPE spfli-connid.
SET PARAMETER ID: 'CAR' FIELD carrid,
'CON' FIELD connid.
CALL TRANSACTION 'FLIGHT_TA' AND SKIP FIRST SCREEN.
Regards. -
Report to display material master data changes
Hi,
Is there a standard report available to display all changes to material master data over a specified time frame i.e all changes made alst week,all chnages made today.
Please suggest.
Thanks in advance.Hi!
Appart from MM04, you can also have a look at MM03 or MM02:
1. Goto MM02 or MM03 transactions and enter the material.
2. Select the relevant views for which you want to have the details.
In the Bar menu follow the path Environment -> Display changes.
Here you will get the list of changes done to the fields with Old and
New values.
Appart from these two tools, there is not any other report provided in the standard for this target.
I hope this helps!
Esther. -
Material Group field is Missing in Material Master - Purchasing view ?
Hai Experts,
I want to configure to bring back Material Group field is Missing in Material Master - Purchasing view. It is mandatory to Create & save a master. I cant save a master in sandbox. Need Help..I make all field as Optional & Create master successfully.. Thanks.. I even verfied in J1ID Master for assesable value & Chapter ID Combination.. But in Cenvat Determination Field, How i can set Default Indicator for Modvat "tick" & how can i set Excise Intimation Date also.
I checked Material Master in mm03 [ Display].
I clicked More & Pre Vals. option in Foreign Trade Import.
For More, It shows this error.
Record 21 MORE does not exist in table T133E
Message no. M3748
For Pre vals., It shows this error.
Record 21 J1PR does not exist in table T133E
Message no. M3748
Kindly guide me..
Thanks & Regards
Swetha -
Requirement in conversion of material master data
i have a requirement in conversion of material master data, what do i need to do in this, do i need to use the LSMW or BDC for this scenario can any one help me in this issue.
Hi Rocky,
You can go for either of these two methods.Conversion in the sense you are going to create one upload program for MM01 and will upload the data using the program
But I suggest go for BDC.Because in LSMW you can not capture all the views for material master.
I am writing steps(BDC recording) for this.Just follow if helpful:
1.Go to SHDB t-code.
2.Press NEW RECORDING
3.enter recording name,Transaction code(MM01) and then press Start recording.
This will take you to the transaction MM01,please enter the test data given by your functional consultant.Also select the views that required by client.
4.After recording save it.
5.After saving press program button from the menu.
6.This will take you SE38 with the recording code.
7.Then you do as per normal BDC program,declare internal table and map with the uploaded fields.
Shout me for further clarification.
Reward if helpful.
Thank you.
Maybe you are looking for
-
Just upgraded to iOS 7 and my Instagram will no longer connect to Twitter
I get an error message saying "We couldn't connect to Twitter. If you see this error repeatedly, tap Learn More to visit our Help Center." The help center only offers solutions for iOS 5 & 6. I've already confirmed that Instagram is set to use Twitt
-
User moves mouse out of dial while turning it
I have a user interface problem. I'm using dials to control scrolling and zooming in a graph. But it's very easy, as a user, to click in the dial and start dragging to turn it, but end up outside the dial. And then the dial never gets the Mouse Up ev
-
Airport extreme blocking port 25 from my macbook pro
My airport extreme is not supporting port 25 from my macbook pro, only product in my residence that port 25 is not supported. (iPads, iPods, macbook air)
-
Email app has failed. Copies of large email are being continually generated.
Since trying to send out a large email ~40Mb, too large in fact, my email application no longer works. I keep getting socket 993 errors. Copies of the email appear in various email folders, and keep duplicating themselves, seems this is a failsafe to
-
SharePoint Report viewer control JavaScript API
Hi, We are using SharePoint report viewer web part to show SSRS reports in SharePoint 2010. We need to perform some HTML manipulation (to avoid scrollbars) after the report has completed loading. - What is the best way to identify report loaded even