Idoc MBGMCR02 what is the message type

what is the message type for idoc MBGMCR02?

I guess my real question is where do i go to set up a new partner. I think it is SALE but then i am not quite sure what to do there.
I think i need to set up new partners for outbound and inbound processing. then i need to go into we20 and use the MBGMCR message type to be able to be exchanged.
Am i correct
and is there a place where it tells how to use transaction sale to set up new partners?

Similar Messages

What is the message type and basic type used for catsdb in idoc help me

what is the message type and basic type used for catsdb in idoc help me
ANY IDOC FOR CATSDB PLEASE TELL,
Regards,
Jagrut BharatKumar Shukla
points will be awarded

Hi,
Check these message types.
ATT_ABS_WITH_COST and WORKSCHED_WITH_COST.

What is the message type we can take for Payroll system

Hi All,
what is the message type we can take for Payroll system

Hi
I feel that you are talking about IDoc Message Types..
HROT_CA                        HR: Outsourcing - Canadian Payroll
HROT_CM                        HR: Outsourcing - Canadian Master Data Payroll
HROT_US                        HR: Outsourcing - US Payroll
HROT_XX                        HR: Outsourcing Payroll International
HRTRPR                         Transfer TRV-PAY(PayrollTravelExpenses)
MANAGEREXTPAYROLL_INSERTLEGACY Transfer payroll account
MANAGEREXTPAYROLL_INSERTOUT    Update of a payroll result using an outsourcer
these are the available Message type for payroll...
hope you are talking about IDoc message type for Payroll...
vijay

What is the message type in a bindingFault?

I have an invoke that sometimes gets a bindingFault that I'd like to catch. What is the message type for the fault variable of a bindingFault? More generally, where does one go to find the message type for any of the standard system faults?
Bret

Search you drive for RuntimeFault.wsdl. Add this to your project and create a variable based on that message type
Pete

What are the message types available for Vendor Address?

Hi Everybody,
I need to read the all the change pointers of Vendor Address using the function moudle 'CHANGE_POINTERS_READ'. To call this FM I need to pass Address's Message Type. I am passing ADRMAS as message type. but i am not getting any records into change pointers internal table.
Pls help me out by informing the message type of Vendor Address.
Regards,
Nagaraju Maddi

Hi,
The address group is in the segment E1BPAD1VL1-ADDR_GROUP.
Check the table TSAD7 for Address groups (central address management)
Reward points
Regards

What is the message types(cross applications) for postgoods issue(outboun)

Hi ,
please provide what is the messagetypes for POST GOODS ISSUE(OUTBOUND)
AND GOODS RECEIPT(INBOUND).
Thanks,
sriii

Hi,
Message type ACPJMM ( message B1003)
Refer the following post.
Outbound IDOC for goods movement
Regards,
Jagadish

Urgent - Idoc type and the Message type

Hello
Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
Thanks in advance

HI
Pratibha
How are you ?
Please check the below links:
http://scn.sap.com/thread/990524
http://www.erpgreat.com/pm003.htm
http://scn.sap.com/thread/1386811
http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
Mutti

Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

Hi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu

Regarding the Message Type and IDOCS related to IS-Banking

Hi Gurus,
can any one provide me the Message Type and IDOCs related to IS-Banking.
Regards.
Kiran kumar.

Hi,
Refer this link,
http://www.stylusstudio.com/edifact/d04b/BANSTA.htm
Hope it helps you.

ALE-IDocs: Issue on COGRP1 & COGRP6 Message Types

Dear Experts,
I need to send the Cost center groups data and Profit Center groups data from one system to other, I had sent this for one time using the tcodes, from now on I need to send only the changed data, so configured the ALE for this.
I activated change pointers generally in BD61 and then activated change pointers for message types in BD50. Cost Center Group (COGRP1), Profit Center Group (COGRP6).
Why is RBDMIDOC program not showing any output when executed with standard message types COGRP1 and COGRP6 ?
It is working fine with other message types like MATMAS, DEBMAS, COSMAS, PRCMAS, CREMAS.
Tcode: BD59: Assignment of Object Type to Message
Tcode: WE30: Develop IDoc Types
Tcode: BD52: Change document items for message type
So, COGRP1 does not have assignment of all the segments that are displayed for the IDoc Type: COGRP01 in WE30. Do we need to assign all these segments and fields to the message type in BD59? If so, how to create this ALE Object Types and what are these table names and fields in BD52., any user exits kind of thing for populating the fields if we do this way?
I am really having trouble and great confusion with this.
I would really appreciate you if you could provide me an answer or a hint.
Thanks in advance for the time you spent on this.
RV

Hi,
You need to follow following steps for the activation of change pointer.
1) Enable change pointer globally (BD61)
2) Enable Change Pointers for a Message Type (BD50)
3) Specify the Fields for Which Change Pointers Are to Be Written (BD52).
BD59 is used to Assign Filter Object Type to IDoc Field. Then you can add filter while creating distribution model.This is used when you have to filter the Idoc at distribution stage. It has nothing to do with the change pointer technique.
In BD52 , you have to assign the change pointer object(this you can find using T.code SCDO), table name and field.In your case change doc object is ALESETS
Just make sure that you are making changes in Cost center groups data and Profit Center groups and then execute program RBDMIDOC.
Regards,
Monika

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Providing the message types to included for change pointers

Hi Everyone,
How can we Provide the message types to be included for change pointers.?
How can we turn-on Change pointer update generally?
Iam converting the idoc to XML format in XI , So. i need the queries to solve( understand)
Thanks
Manju
P.S. Points will be rewareded

Hi Manju,
How can we provide the message types to be included for change pointers?
You can use transaction BD50 to activate change pointer for a message type.
How can we turn-on change pointer update generally?
You can use transaction BD61 to activate change pointers generally.
Regards,
Ferry Lianto

What are the varoius type of process chain errors how we can solve them.

Hi,
I need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible please provide me any document also so that i can solve my
abnormal problems for process chain errors.
Thanks in advance .

Hi,
1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
For more errors and solutions go thorugh the link below
http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
Regards,
Marasa.

How to find the message type for application

Hi Guys,
while postnig the data through idocs,we use message types
the issue is how can we find the massage type for application?
plzz help

You can find these in transaction WE82.
You can find in WE57, this basis type, which fm is attached (BAPI_IDOC_INPUT1).
Then check out transactions WE41 and WE42.
You can use the table EDIMSG, in SE16 to list all the msg types making use of the same IDoc.
or
If you want to get all the message types, you can use WE81.
If you want to see which message types are attched to a particular Idoc type, use WE82
check it in BD60 and WE57..

Idoc MBGMCR02 what is the message type

Similar Messages

Maybe you are looking for