Idoc message for distributing site groups/site hierarchy in retail env

Hi,
I am trying to distribute site group data (hierarchy: brand, territory, region, district, site) using an idoc.  Does anyone know what idoc message/type I could use to do this?
Thanks!
Leticia

Hi Bhoopal,
         Go to Tcode WE19 and enter the Failed Idoc number(can be seen in WE02)
Go to Segment E1WPB04 and Double click on it you will see the Tax code and Tax Amount displayed.Change the Tax code as per what you have maintained in your Article master for eg : 0 - No Tax,1-Full Tax,2-Half tax etc.
Then Click on Standard Inbound and that should generate a new idoc and then check the status of the newly created Idoc whether it gets posted succesfully(With status 53)
NOTE : Make sure you used the correct currency since based on the country specific tax classification it might expect different tax rates(in case you maintained different tax rates based on the country)
Hope it helps
Best Regards,
Aram K.

Similar Messages

  • Error occurred while forwarding a message for distributed destination

    Is there a change in the way that Uniform Distributed Destinations are handled in the cluster after weblogic9.2?
    I am using oracle weblogic 10.3.0.1 in production mode. I have two managed servers, each managed server has a JMS Server.
    I create a Uniform distributed Topic on the System module, and publish a message to it.
    I can see the message in the topic on the first JMSServer but the following error happens and the message never makes it to the second JMSServer
    <Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on IP:PORT for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManSvr1" for domain "Domain" running in Production Mode>
    <Sep 24, 2009 2:00:46 PM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on mip:mport>
    <Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Sep 24, 2009 2:09:52 PM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destination member JMSSystemResource!JMSServer2@example: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
         java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
         java.rmi.ConnectException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:

    I specified the cluster address, but still get the following errors after a message is published to the topic. Are there other configuration items that can be checked?
    <Sep 29, 2009 9:51:49 AM GMT+00:00> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Sep 29, 2009 9:52:01 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 10.241.134.92:7018
    for protocols admin, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.241.134.92:7019 for
    protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ClusManSv
    r2" for domain "domain" running in Production Mode>
    <Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on 224.0.0.10:7390>
    <Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Sep 29, 2009 9:56:14 AM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destinati
    on member SOAFJMSSystemResource!SOAFJMSServer1@EventingAdminTopic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExc
    eption: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:testnn
    2092.net:domain:ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Def
    ault[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested exception is:
    java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
    ilable router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
    1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
    known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
    exception is:
    java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
    ilable router to destination
    weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:
    managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:managedServer.net:domain:
    ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; N
    o available router to destination; nested exception is:
    java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
    ilable router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
    1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
    known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
    exception is:
    java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
    ilable router to destination
    at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:158)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
    at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:503)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:499)
    Truncated. see log file for complete stacktrace
    java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,701
    7,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No known v

  • JMSAn error occurred while forwarding a message for distributed destination

    Hi,
    i have getting issue with JMS Server delivery fail, below is the errors
    ####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> < <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
    (self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
    d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
    on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destina
    tion unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination
    weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
    8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination
    at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
    at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
    at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
    at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.Con
    nectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    ####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> <dal604se113com> <a> <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
    (self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
    d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
    on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destina
    tion unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:dsa, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination
    weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
    8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination
    at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
    at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
    at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
    at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
    at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.Con
    nectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
    a.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.SocketException: Connection reset; No available router to destination; nested exception is:
    java.rmi.ConnectException: Destination unreachable; nested exception is:
    Edited by: Ikhan on Aug 29, 2012 4:00 AM
    Edited by: Ikhan on Aug 29, 2012 4:01 AM

    The distributed topic forwarders replicate messages to every member of a "replicated distributed topic". They will report errors if intra-cluster communication is interrupted or if servers in the cluster shut down. I recommend checking your server logs to see if other errors/warnings exist, and, if you suspect an intra-cluster communication problem, consulting the cluster troubleshooting guide(s) in the edoc.
    Most newer apps (apps hosted on versions 10.3.4 or higher) should consider using the new "partitioned distributed topics" instead of "replicated distributed topics". These don't use forwarders and scale better.
    HTH,
    Tom

  • Splitting multiple IDoc XML files into single IDoc messages for R/3

    Hi all. I have a problem splitting IDoc XML files coming in to XI. I currently have an interface that takes in single store sale IDoc transactions (type WPUBON01) in an IDoc XML file. I then have some complex graphical mapping on the IDoc before sending to R/3 via the IDoc adapter. This works fine. However, we now wish to include multiple sales in one file i.e. many WPUBON01 IDocs. I could use message splitting to do this BUT the mapping is so complex, I do not wish to have to change it to enable the processing of many IDocs in one file instead of just one.
    What I want to do: have one mapping splitting a multiple IDoc XML file into single IDoc messages and then another taking these single messages as before and performing the mapping. I cannot find a way to do this in one interface; the main problem I'm having is getting XI to split the multiple IDocs into many single IDoc messages within XI itself. I'd be very grateful for any advice on the best way to do this.
    Thankyou.
    Stuart Richards (Halfords, UK)

    Bhavesh,
    Thanks again for a clear explanation... I'm moving forwards but still struggling. I've been on this all afternoon today (after a break on other things) and just cannot get my message to split properly (though the SOAP adapter problem I had earlier is now fixed!). If my initial IDoc XML file contains this format:
    <WPUBON01><IDOC>....</IDOC>
                          <IDOC>....</IDOC>
                          <IDOC>....</IDOC></WPUBON01>
    .. I'm not sure what the cardinaility on the first message mapping and interface mapping should be. I'd have thought the source interface would be 1 and the target would be 0..unbounded but this isn't working. I'm trying different things but I get different errors each time. Currently, I have the above cardinality in my first interface and I'm passing in the following data:
    <WPUBON01><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832292</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160633</VORGZEIT><BONNUMMER>1001</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1001</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832293</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1002</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1002</ZUONR></E1WPB06></E1WPB01></IDOC><IDOC><EDI_DC40><TABNAM>EDI_DC40</TABNAM><MANDT /><DOCNUM /><DOCREL>620</DOCREL><DIRECT>2</DIRECT><IDOCTYP>WPUBON01</IDOCTYP><MESTYP>WPUBON</MESTYP><MESCOD>ST6</MESCOD><SNDPOR>WPUX</SNDPOR><SNDPRT>KU</SNDPRT><SNDPRN>0518</SNDPRN><RCVPOR /><RCVPRT>KU</RCVPRT><RCVPRN>0518</RCVPRN><REFINT>00000003832294</REFINT></EDI_DC40><E1WPB01 SEGMENT="1"><POSKREIS>0518</POSKREIS><KASSID>29</KASSID><VORGDATUM>20071029</VORGDATUM><VORGZEIT>160634</VORGZEIT><BONNUMMER>1003</BONNUMMER><KASSIERER>100</KASSIERER><CSHNAME> </CSHNAME><BELEGWAERS>GBP</BELEGWAERS><E1WPB02 SEGMENT="2"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="3"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="4"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="5"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="6"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="7"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="8"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="9"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="10"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="11"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="12"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="13"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB02 SEGMENT="14"><VORGANGART /><QUALARTNR>ARTN</QUALARTNR><ARTNR>000000065601301390</ARTNR><VORZEICHEN>-</VORZEICHEN><MENGE>1</MENGE><AKTIONSNR>0000000000</AKTIONSNR><REFBONNR> </REFBONNR><E1WPB03 SEGMENT="15"><VORZEICHEN /><KONDITION>PN10</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03><E1WPB03 SEGMENT="16"><VORZEICHEN></VORZEICHEN><KONDITION>ZPN1</KONDITION><KONDVALUE>1.00</KONDVALUE><CONDID /><QUALCONDID /></E1WPB03></E1WPB02><E1WPB06 SEGMENT="17"><VORZEICHEN></VORZEICHEN><ZAHLART>PTCS</ZAHLART><SUMME> </SUMME><KARTENNR /><ZUONR>1003</ZUONR></E1WPB06></E1WPB01></IDOC></WPUBON01>
    In the message monitor, I get a chequered flag. Great. However, I get the dreaded error 500 in the SOAP receiver comm channel:
    SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Exception caught by adapter framework: SOAP Error
    Delivery of the message to the application using connection AFW failed, due to: SOAP Error.
    Any ideas as to what this might be?! I'm getting there.... if I get a solution out of this, I promise to write the blog myself!
    Cheers
    Stuart

  • PP IDOC Message for Work Center upload with Costing

    Hi all,
    I'm looking for apropriate IDOC message type to import  Costing data with Work Centers.
    I found some of them to pass WorkCenters data, the best is LOIWCS I think, but I don;t see a possibility to passing costing data. ( e.q. KOSTL domain field)
    Any suggestions? Is there any other IDOC to pass Costing data for WC's?
    Thnx in advance
    Tom
    Edited by: Tomasz Szofer on Jan 24, 2011 12:48 PM

    Dear Nixal,
    Assume this 10 hours is for some base quantity and this value gets changed based on operation(order quantity) means,you can
    check with standard SAP formula SAP006 = Machine * Operation quantity / Base qty.
    In case if the duration 10 hours is for any operation quantity means,then there is no relation between base quantity and
    operation,so you have to assign a formula which has only duration alone.
    Likewise you can decide and select the suitable formula and use the formula key in the costing tab to calculate the cost based on
    the formula selected.
    Regards
    Mangalraj.S

  • Only in Firefox Ver. 7.0.1, receive error message for one site only " Tired help advice -didn't workAn error occurred while displaying this page"

    The above error message suddenly appeared trying to load Schwab.com. Couldn't get help to solve problem. Uninstalled Firefox and then downloaded fresh version - still doesn't. Note I have McAfee security suite installed. Performed Delete of Firefox and then reinstall - still no help

    Download Microsoft Visual C++ 2005 Redistributable Package (x86) at
    http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99 -220b62a191ee&DisplayLang=en
    It should fix the sidebyside errors. It did for me.

  • Receiving "Unable to connect" error message for every site, but IE8 works fines

    HP Pavilion , AMD Athlon X2 Dual, Core processor 3800+. 2Ghz, 1MB Ram, Windows XP Media edition 2002, Service Pack 3. Firefox Version 3.6.8
    When starting Firefox, it always says "Unable to Connect". IE8 works fine.

    This is normally caused by a firewall blocking Firefox, for more details see [[Firefox cannot load websites but other programs can]].

  • Are there requirements for deterministic data messaging for distributed LabVIEW applications across an Ethernet/IP network?

    Our company, RTI, just entered the Alliance program at NI recently. We are curious if power users of LabVIEW have requirements for running distributed, networked multiple LabVIEW applications in a real-time, deterministic manner? We are not attempting to make this a sales call, but if we should move forward with development of VI's that would allow distributed LabVIEW applications. We have already scoped out the effort but would desire guidance on VI layout, descriptions and ways to give a "LabVIEW" experience and not a disjointed VI that looks unprofessional. We are not sure if demand exists for this requirement. We would like to talk with
    and investigate what LabVIEW users want. We have attached a brochure on this real-time data messaging technology for your review. Maybe there is no need and we apologize for taking up NI Developer Zone bandwidth and your valuable time. We look forward to your responses.
    Attachments:
    NDDSProductBrief3-022.pdf ‏299 KB

    We are developing applications which have a distributed layout. E. g. we have 2 or more test places which have no user interface and 1 place where all configuration and monitoring and data storage takes place. We use TCP/IP for the inter computer communication. For this purpose we have developed a library which has a similar interface and usage as the queue VIs from LV 6.0.2. We support automatic reconnect on TCP/IP level and an acknowledged transfer so the application programmer can choose to do some temporary storage on the local machine if the server part is not running for sometime. We have not seen any market for that so we do not plan to sell it.
    From a lecture at the NI VIP days in Munich in 2001 personal from Siemens A&D stated to
    get a real time like behaviour over ethernet with TCP/IP you have to take care that the load will not exceed 30% of the bandwidth.
    For more information you can contact me at [email protected]
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Import of material groups into hierarchy not possible (note 432339)

    Dear All,
    I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system.  Prior to this our SRM system configured as standalone and Material Hierarchy is already defined.  When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message.  In the message the OSS note also mentioned.  In the OSS note they have given following solution
    Error message "Import of material groups into hierarchy &1 not possible":
    In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign 
    hierarchy R3MATCLASS to application 'Purchasing'. Then the material  groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
    assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
    My problem is I am not able to find out the path given in the  OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
    with regards
    Ram

    Hi ram
    one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
    /people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
    plz visit Marchin blog to.o
    since u r aleady in standalone but now you may try push material group from ecc to srm .
    so you need to do set up all crm middleware settings in ecc and srm.
    br
    muthu

  • IDOC message type for "Site" in SAP Retail module?

    Hi All,
    We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction:  WB01, WB02).  Does anyone know if there's an IDOC message/type already associated with this?  Thanks in advance for your help!
    Cheers,
    Matt

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • Recycle bin to show all deleted items on the site collection for specific user group

    hi there, is there any way where a certain sharepoint group (i.e. site collection members) to view and restore deleted items on theentire collection, without giving them site collection rights orgive them more rights than necessary? we wanted to create
    aSP group that has the permission to restore deleted items and give them to selected users so that our users won't have to contact us when they want to restore a deleted item

    I don't believe you can. If an item get's deleted it should go to the first recycle bin @ /_layouts/15/RecycleBin.aspx
    The Recycle Bin gives a site collection administrator
    greater control when users delete files, versions of files, list items, libraries, lists, and folders from a SharePoint site by providing a second stage safety net before an item is permanently deleted from a site. When a user deletes an item from the Recycle
    Bin, the item is sent to a second stage Recycle Bin (also known as the Site Collection Recycle Bin) that the site collection administrator manages. This article focuses on how a site collection administrator can manage the Recycle Bin for a site collection.
    https://support.office.com/en-US/Article/Manage-the-Recycle-Bin-of-a-SharePoint-site-collection-5fa924ee-16d7-487b-9a0a-021b9062d14b
    Ibrahim Sukari, Technical Consultant | SharePoint | Dynamics CRM |
    LinkedIn Profile

  • Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?

    I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
    I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
    Please help as I need this live urgently (without additional expense).

    Hi Judy
    Appologies for this un-answered post, if any related issue is still active please reach out to our support directly.

  • Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

    Hi,
    Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
    Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign  2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
    IP for communicating with the CAS server which is in a different domain.? 
    Details: 
    1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
    Thanks
    Rajesh Vasudevan

    First, it's not possible. You cannot attach a primary site to an existing CAS.
    Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
    CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
    no functional differences but does add complexity, latency, and additional failure points.
    Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
    As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
    for trouble IMO.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Unable to create site hierarchy for any variation label

    I am unable to create a site hierarchy for our source variation and any subsequent variation labels we setup. The error when trying to do so is:
    “An error was encountered performing this operation.
    You may re-try the operation, and you may need to clean up the half-created data first before re-trying. If the problem persists, please contact your system administrator. “
    We have a test farm which didn't have this problem.
    Any help gratefully received.

    Thanks Mark.  I'll certainly give that a try.  But today I started digging into the SharePoint Logs and found this entry:
    10/01/2007 11:42:59.28  w3wp.exe (0x1240)                        0x17FC Windows SharePoint Services    Runtime                        8yr8 Exception An unhandled exception has occurred. Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'. System.InvalidCastException: Unable to cast object of type 'My.WebParts.ContactUsWebPart' to type 'Microsoft.SharePoint.WebPartPages.WebPart'.     at Microsoft.SharePoint.Publishing.PublishingPage.FixWebPartUrlsForVariation()     at Microsoft.SharePoint.Publishing.Internal.DeploymentWrapper.CreateVariantPage(PublishingPage sourcePage, PublishingWeb targetArea, String destPageWebRelativeUrl, String pageLayoutName, String title, String description, Boolean copyResources, Boolean enforceMajorVersion, SPWeb& webToClose)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationInner(VariationLabel varla... 
    10/01/2007 11:42:59.28* w3wp.exe (0x1240)                        0x17FC Windows SharePoint Services    Runtime                        8yr8 Exception ...bel, String pageLayoutName, String destPageName, String title, String description, Boolean copyResources, Boolean overrideStopUpdate, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, Boolean stopAutoSpawnAfterDelete, Boolean sendNotificationEmail, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingPage.CreateVariationAuto(VariationSettings variationSettings, VariationLabel varlabel, Boolean isCreateHierarchies, Boolean enforceMajorVersion, Boolean skipIdentityTargetConflictChecks, LongRunningOperationJob lroLogger)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeepForChildren(VariationSettings variationSettings, PublishingWeb sourceParentPubWeb, VariationLabel varlabel, Boolean isCrea... 
    10/01/2007 11:42:59.28* w3wp.exe (0x1240)                        0x17FC Windows SharePoint Services    Runtime                        8yr8 Exception ...teHierarchies, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.PublishingWeb.CreateVariationsDeep(VariationSettings variationSettings, ReadOnlyCollection`1 varLabels, Boolean isCreateHierarchies, Boolean recurse, LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.VariationSettings.CreateHierarchies(LongRunningOperationJob lroLogger, List`1 errors)     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.CreateVariationHierarchies()     at Microsoft.SharePoint.Publishing.Internal.WebControls.CreateVariationHierarchiesLro.DoWork()     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__11()     at Microsoft.Office.Server.Diagnostics.Fir... 
    10/01/2007 11:42:59.28* w3wp.exe (0x1240)                        0x17FC Windows SharePoint Services    Runtime                        8yr8 Exception ...stChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowException, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.<ThreadEntryPoint>b__f()     at Microsoft.Office.Server.Diagnostics.FirstChanceHandler.ExceptionFilter(Boolean fRethrowException, TryBlock tryBlock, FilterBlock filter, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.Office.Server.Diagnostics.ULS.SendWatsonOnExceptionTag(ULSTagID tagID, ULSCat categoryID, String output, Boolean fRethrowExcep... 
    10/01/2007 11:42:59.28* w3wp.exe (0x1240)                        0x17FC Windows SharePoint Services    Runtime                        8yr8 Exception ...tion, TryBlock tryBlock, CatchBlock catchBlock, FinallyBlock finallyBlock)     at Microsoft.SharePoint.Publishing.Internal.LongRunningOperationJob.ThreadEntryPoint()     at System.Threading.ThreadHelper.ThreadStart_Context(Object state)     at System.Threading.ExecutionContext.runTryCode(Object userData)     at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)     at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)     at System.Threading.ThreadHelper.ThreadStart() 
    This exception totally amazes me because I thought from WSS 3.0/MOSS 2007 onwards all Web Parts could be derived from System.Web.UI.WebControls.WebParts.WebPart.  So does this mean I will have to change all of them?
    Did you run into anything similar?
    Thanks.

  • How to create sharepoint Group with read only permissions using powershell for entire site ?

    How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

    Hi
    using (SPSite site = new SPSite(url))
    using (SPWeb web = site.OpenWeb())
    SPUserCollection users = Web.AllUsers;
    SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
    SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
    SPGroupCollection groups = Web.SiteGroups;
    string GroupName = “Super Exclusive”;//your group name
    string GroupDescription = “Super exclusive group description.”;
    groups.Add(GroupName, owner, member, GroupDescription);
    SPGroup NewSPGroup = groups[GroupName];
    SPRoleDefinition role = Web.RoleDefinitions["Read"];
    SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
    roleAssignment.RoleDefinitionBindings.Add(role);
    Web.RoleAssignments.Add(roleAssignment);
    Web.Update();
    Please 'propose
    as answer' if it helped you, also 'vote
    helpful' if you like this reply.

Maybe you are looking for

  • Sub report in column header

    Infinite loop creating new page due to column header overflow. I have a sub report on the column header which works, Because my sub report return different records from data source, it fails and get infinite loop error message like above when I have

  • How do I skip footer records in Data file through control file of sql*loade

    hi, I am using sql*loader to load data from data file and i have written control file for it. How do i skip last '5' records of data file or the footer records to be skiped to read. For first '5' records to be skiped we can use "skip" to achieve it b

  • Creating Non Copyable PDF document in Portal

    Hi, In our portal we save and Print report to PDF. Now business requires that the some of the PDF documents cannot be copyable by the users. Is this technically possible to do and how can achieve it. thanks Bhat

  • Iweb 1.1.2 to iweb 2.0.4

    For the life of me I can't figure out how to open the working sites i built in 1.1.2 with my newer version, 2.0.4 to work on them. Is there some secret i'm not privy to?

  • Error 1603 when Installing JMS

    Hi, I am doing a training period and i just tried to install JMS Standalone 3 2005Q1, on Windows Server 2003 R2 SP1. When launching setup.bat, an error 1603 occurs, saying that a file cannot be modified because it's in used but the installation goes