IDoc Message Type different in sending to receiver system

Hi,
I am sending DESADV (message type) IDoc to other SAP system. But problem is in other system Message Type DESADV is available in a different name ie DESADV1.
No of segments and their name are same in both the system are same..
In that case if i am sending DESADV from sending system whether receiver system can get IDoc?
Note: In sending system i could not able create message type DESADV1
Sa_R.

Hii..
Looking like Strange scenario...
Normally we must have the Same message type in both Sender and Receiver systems.
Bcoz whenever the IDOC is Received in the Receiving system it will process based on the Message type. So the Same message type must exist in the Sender as well as Receiver.
I can think of a Solution: Just try..
In the Sender system Create a Reduced message type  (Tcode BD53) Of the Message type DESADV. Select all the Segments and Fields
In the Receiver system also Create a Reduced message type with the Same name as Sender system (Tcode BD53) Of the Message type DESADV1. Select all the Segments and Fields.
Then use this Reduced message type since it exists in both the Systems.
<b>Reward if Helpful.</b>

Similar Messages

  • ALE using HRMDA message type - Comit not perform in receiving system

    Hi,
    I want to use ALE to transfer HR master data between two ECC instances. I have set-up all the configuration; distribution profile, filter etc... I tried to transfer the master data using standard SAP report RHALEINI.
    The iDoc is generated and transfer correctly in the receiving system. The final status of the iDoc is 53 - Application document posted. The issue we have is that the comit to tables is not happening. Infotypes remains empty even if the status of the iDoc says it was posted. We are trying to transfer infotype 0000, 0002, 0001 and 0006
    Anyone can help ?....
    Thanks
    Louis

    Hi Ted,
    Thanks for your answer,
    Autorization is the first thing that we consider. We generate the IDOC by the program RBDMIDOC .
    The job's user is the sap_all authorization. So it should not related with auth.
    And this does not always occur. For example, two days ago it occurs, but today does not occur.
    Best Regards
    Hasan.

  • Idoc Message type and Process Cosde for CJ01 transaction

    Hi,
    What is the Idoc message type and inbound Process code for CJ01 transdaction?
    Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
    Thanks.

    Hi,
    All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
    Go to se93 and search for BD* and look for the description.
    Regards,
    Nilesh.

  • IDOC message type reduction

    I have a PLM system that will be receiving Material Master Data from multiple R/3 systems.
    I will need to create a reduced message type for MATMAS.
    Need confirmation of steps:
    1. I create a reduced message type ZMATMAS in the PLM system (BD53)
    2. Activate change pointers for ZMATMAS in PLM (BD53)
    3. Generate transport request for ZMATMAS in PLM (BD63)
    4. Import reduced message type into all the R/3 systems (STMS)
    5. Verify distribution models in R/3 systems (BD64)
    6. Send material from R/3 systems to PLM system (BD10) using reduced message type
    The question I have about these steps is whether I should create a reduced msg type in all the R/3 systems (multiple times) or is it ok to do it one in PLM as described above?
    Please let me know if steps are correct?

    Hi Raynald LaGuerre ,
    1.To create a new message type, follow these next few steps:
    •     Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
    •     Choose Create logical message type by double clicking on it
    •     Click on change icon to enter change mode
    •     Click on New entries to add a new type
    •     Enter the required message type
    2.WE82--LINKING OF MSSAGE TYPE TO IDOC TYPE(DISPLAY).
    Rgds
    Sree M

  • IDOC Message type 'ORDCHG' - Sales Order Delete funcanility

    Dear Guru's,
    I have a requirement for a client where client is sending a EDI message to change & Delete a Sales order. I have mapped change option with IDOC message type 'ORDCHG' and basic message type 'ORDERS05'. Change option for the sales order is working fine.
    Can any one tell me with message type 'ORDCHG'. how to delete a Sales Order. In EDI, client is passing only Header segments with Summary details.
    Your reply will of greate help to me.
    With Best Regards,
    M. Rajendran.

    Hi Ram,
    Thanks a lot for sharing the link, but this dint solve my purpose. I have a different case all to geather.
    My client is passing only Header segment and summary segment in the EDI. Thru ORDCHG i need to cancle/Delete entire sales order.
    But i found that in standard IDOC Message type 'ORDCHG' only line item deletion/Cancle is availble but i wanted to delete/cancle entire sales document.
    Any possibilites available in ORDCHG. Your reply will be much appreciated.
    Thanks in Advance.
    With Best Regards,
    M. Rajendran.

  • IDOC message type use for standard price ALE

    Hi,
    Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
    ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
    I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data?  thx.

    Hi
    I think the IDOC type will MATMAS01.
    Thanks
    Deepak

  • Docu of Idoc message type CRMXIF_ORDER_SAVE_M02 for service request

    Hi,
    We are using the customer interaction center / service desk in CRM 7.0 and want to send service calls from other systems to our CRM service desk.
    I've found that this should be possible via IDOC CRMXIF_ORDER_SAVE_M02.
    Does someone has more documentation of this idoc message type (meaning of the fields, obligatory fields, ...) ?
    Thank you,
    Stefan

    Hi,
      Go to we19 t-code, there give messgae type CRMXIF_ORDER_SAVE_M and then execute.
    Next screein beside EEIDC double click and give send and receiver port.
    After that clcck CRMXIF_BUSTRANS popup will open. Fill required fields.
    Then expand CRMXIF_BUSTRANSA do the same for all.
    After that click start oubound processing.
    For more information go to SPRO->CRM->CRM middleware and related componets->exchange data with external components->XIF adapters then click OVERVIEW documentation help. Then click CRMXIF_ORDER_SAVE.
    You will get the information on outbond as well as inobound.
    Regards
    Srinu
    Edited by: sreenivasulareddy eragamreddy on Jul 10, 2009 7:45 PM

  • IDOC message type LOIPLO not triggering

    Hi Friends
    Our client want to send firmed planned orders to External system through outbound IDOC LOIPLO
    So we are using MF50 to firm the planned orders.
    The idoc message type LOIPLO is not triggering.
    How to trigger IDOC message type   LOIPLO . What are the settings we have to do.
    Regards,
    Srihari.M

    dear friend,
    Message Type :  LOIPLO
    Basic Type :        LOIPLO01
    You need not create any custom IDOC type as we are having a standard IDOC type available within SAP, but you need to write a custom function module to read the data from the IDOC segments and then call the below BAPI to post the Planned Order.
    Check the input parameters of BAPI and gothrough the documentation of the Basic Type in WE60 transactions, whether all the necessary input parameters of the BAPI are covered in the standard IDOC type, if not then we need to customize the standard basic type to meet the requirements.
    Bapi which needs to be used is BAPI_PLANNEDORDER_CREATE
    good luck!

  • ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

    Dear Experts,
                        I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                        But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                        Please help me to rectify this problem

    Hi Dharmendiran,
    We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
    Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
    Thanks.

  • IDOC message type and message code and function?

    Hai...
      anyone can explain with example what is IDOC message type and message code and function? how it is used?
    regards,
    prabakaran

    Hi
    An IDoc type can be implemented for various "logical" messages; one message can also be assigned to different IDoc types (m:n relationship).
    The message is defined by the values for message type (required), message code (optional) and message function (optional). These three fields belong to the key fields in the partner profiles, which are used, for example, to determine inbound processing. If the 'Message type' field is not maintained (e.g. in the case of a control record from Release 2.1, in which MESTYP did not exist), the IDoc Interface uses the value from STDMES (EDI message type).
    If possible, the descriptions of the message type should be linked to the corresponding EDI message type.
    The message ORDERS (= message type) identifies purchase orders (outbound) and sales orders (inbound).
    Message code or Process Code for Inbound Processing
    Code which identifies a process type.
    The process type determines which process is used to convert an IDoc to an SAP document.
    Process code for outbound processing
    Code which identifies the type of data which is to be sent via the IDoc interface.
    Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
    The process code is only used with applications which perform outbound processing via Message Control (NAST).
    Thanks & Regards
    Kishore

  • IDOC message type for "Site" in SAP Retail module?

    Hi All,
    We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction:  WB01, WB02).  Does anyone know if there's an IDOC message/type already associated with this?  Thanks in advance for your help!
    Cheers,
    Matt

    Hi,
    please read SAP notes 892103 and 551035.
    The correct IDOC type should be FIDCC1 / FIDCC2.
    Best regards,
    Andreas

  • To SET -UP message type 5 External Send to the purchase order approver

    Hi All
    Please help me to To SET -UP message type 5 External Send to the purchase order approver
    Susan

    Susan,
    This to me sounds like a release strategy setup using workflow. Could you please set up Release strategies initially and and then the workflow part couldd  be handled by a workflow personnel.
    Else, Setup teh message type with medium 7, and partner function MP, put the user name in the partner field. Go to communication method, choose the recipient type and fiull other required parameters and you should be set.
    Edited by: Pavan Kumar on Apr 6, 2010 12:27 PM

  • How to get the segment  detials of IDoc message type.

    Dear Friends,
    I  want to write function module , which takes the IDOC  message type  as an input and returns all the segment fields in response.
    Basically I want to get the XML schema of a IDOC message type and need to expose these details toa 3rd party application to use.
    Dear experts ,Please do give me some ideas how to achieve this .
    like tables from where i can get these details or u feel any other goos way of doing the same.
    thx,
    jeevan

    Hello experts,
    Please participate .........
    To redefine my objective I will say:--
    I am trying to do some thing very similar that is there in XI .
    You might have seen the way IDOCs are shown while mapping an idoc structure.
    Its like you select a message type and u get all the list of  Idoc Structure shown .
    I am really relying on you people.
    thx ,
    jeevan

  • Idoc/message type related to su01 tcode fields?

    hi experts,
    when i create a user in su01,an idoc should get triggered.
    are there any standard idoc / message type having fields related to this.
    thanks,
    charu
    Edited by: charudevrani on Jan 11, 2012 7:38 AM

    Hi Charu,
    You can use one of following IDoc types, depending on the action you want to perform on the user master record:
    USERCHANGE     Change user
    USERCLONE     Create User with Template in Another System
    USERCREATE     BAPI to Create a User
    Regards,
    Marcin

  • CRM: IDOC Message Type: CRMXIF_PARTNER_REL_SAVE_M

    Hi,
    I'm currently working on a CRM data migration project. I'm using the IDOC Message Type: <b>CRMXIF_PARTNER_REL_SAVE_M</b> to map data into contact relationship structures.
    The problem I am having is the above interface works with SAP standard <b>BUR001</b> type contact relationships. But a copy was taken of <b>BUR001(is contact person for) => ZUR001 (former contact person of)</b>. This allows you to add a date range: <b>DATE_TO - DATE_FROM</b>. Using the above interface I am able to map these dates to the <b>ZUR001</b> type relationships.
    All the other data I try and map  i.e Function, Telephone No, Fax No ect.. will not map. I'm at a loss as to why not?
    note: running CRM 4.0
    Any help with this would be greatly appreciated.
    Regards,
        Philip Johannesen

    Thanks Saquib, the OSS note was very informative.
    Do you know where I can find <b>" In addition, you can find DXWB/LSMW examples under service.sap.com/CRM-Integration which you can install in a CRM system and use as models."?</b>
    I've looked under the new link <b>"service.sap.com/crm-netweaver"</b>. But have been unable to find any examples.
    I've awarded points as promised.
    Regards,
       Philip Johannesen

Maybe you are looking for

  • How to change the valueswhich are entered in select-options

    Hi , Iam passing Material Numner Vlaues through select-options. My requirement is i need to prefix and postfix star to the Material. For that i have written logic like below. LOOP AT S_MATNR. S_MATNR-SIGN = 'I'. S_MATNR-OPTION = 'EQ'. CONCATINATE  ''

  • Embeded Quicktime in Safari no longer working

    For some strange reason, embeded quicktime is no longer loading in safari. I don't even get the question mark, i get nothing. The space where the Quicktime is supposed to be is not there at all. Anyone else have this issue and now how to fix it? Work

  • File to IDOC. Mapping doubts...

    Hi XI Gurus.. I'm doing a file to IDOC scenario.. I've a filed called Master Number and Sequence number.. First I've to sort the file based on Master number. based on this sorted file I must sort the sequence numbers. For example: 0011232      01 001

  • An Asset could not be changed through AS02

    Hi, In transaction AS02 for a one particular Asset a message appear saying "being process by user AAP". Even the user AAP cannot process the asset and all other users too. It's seems to be locked. How to release this lock? Thanks Kishan

  • Require Planned order + Purchase Req. through MRP

    Hello Sirs, I have a requirement for following scenario...... I have a FERT which has 2 Components, 1 HALB + 1 ROH (Purchasing Item) When i run MRP (MD02) for FERT, i want Planned Order for HALB + Purchase Requisition for ROH. As at present when i ru