IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer  for debugging & finding the Root cause
Thanks & Regards
Kishore

Similar Messages

  • Stock transfer : From QI to Unrestricted

    Hi Gurus,
    When I do stock transfer from QI to Unrestricted or blocked, delivery is created and when I go to pick delivery I get following  error:
    "Select at least one storage type first"
    Message no. L3284
    Can any one help me out?
    Thanks in anticipation.
    RajaRam

    hi
    pls maintain picking storage type.
    by
    ram

  • IDOC message type WMMBXY not including Serial numbers in GR material documents when created with reference to an Inbound delivery

    Hello,
    We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement material document (and stored in SER03).
    Currently segment E1MBXYJ is maintained with the inbound delivery number in field VLIEF_AVIS and Inbound delivery item number in field
    VBELP_AVIS. In segment E1MBXYI, no purchase order is assigned and the fields EBELN and EBELP are blank. The movement indicator (KZBEW) has the value 'B'.
    Even after making the above settings, the serial number(s) maintained on the Inbound delivery item do not get saved to the material document.I did look at OSS note 833603 (Solution for 2 - GR for Inbound delivery) and we have followed the same settings. This works when there is no serial number in the Inbound delivery. However if we have serial numbers, the IDOC posts successfully, however the material documents in MB03 do not have any serial numbers copied over from the Inbound delivery where the serial numbers are definitely assigned.
    Any help you can provide is greatly appreciated!
    Thanks,
    Ashvin
    P.S
    If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. This is what we want to accomplish via the above IDoc process.

    Hi
    Try with enhancement MWMIDO08. See note 833603 - EDI: Goods receipt for stock transport order for further information.
    I hope this helps you
    Regards
    Eduardo

  • Movement type for stock transfer from investment order to the regular stock

    Hi,
    Is there any movement type for the transfer from investment order to storage location stock? We have wrong created purchase orders, where the GR transferred the items to the investment orders. The problem is, that there already a lot of invoices posted on this items..
    Is there any clever solution?
    Points granted,
    Saso

    Hi
    In MTO scenario the stocks are manufactured for the particular sales order and in MMBE the stocks are managed as sales order stocks assigned to that particular sales order no
    This is due to the sales order item cat in MTO carrying specal stock indicator as E
    Opening these stocks to unrestricted is meaningless and not possible because costing and all would have been done according to the sales order
    Non MTO scenario
    +Note MTO stocks are different and sales order stocks are different+
    All MTO stocks are managed as sales order stocks
    But not all sales order stocks are MTO stocks
    But if you want move the stocks from a sales order to unrestricted then MB1B movement type 411 E
    Moving stocks from one sales order to another sales order  MB1B movement type 413 E
    Regards
    Raja

  • File to IDOC mapping - Message Type WMMBXY

    Hi
       I am working on FILE to IDOC Scenario. I have records like the following in my file:
    301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
    301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
    Using an ABAP Program I added DTL in front of every record as I have to convert text file to XML mapping.
    DTL 301 ABC455559 03.11.2009 02u0391B13 01     OBAF515150 G378378 15 PC   20090311 MIGO
    DTL 301 ABC455560 03.11.2009 02u0391B13 01     OBMN515040 437482 50 PC   20090311 MIGO
    When I did this my mapping is fine from source side. For the above two records there are two records created in xml format. But only one record is created at target side. I changed message type WMMBXY to unbounded in the external message but still only one idoc is created.
    Please let me know if anyone faced the same issue.
    Thanks
    Naga

    1..Please mapping ur sorce node (has occurance 0..unbound) with target node.
    2...change occurance in message tag in mapping for IDOC message
    3...change occurance in message mapping for IDOC message
    Regards,
    Manisha

  • What movment types used for stock transfer from Non-WM sloc to WM sloc?

    Hello experts,
    Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
    Thanks

    Hi
    When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
    Can you please help me to resolve the above issue.
    Thanks.

  • MB1B transfer posting Idoc/Message type for outbound and inbound

    Hello All
    Can anyone tell me the idoc/message type for movement type 313 outbound and 315 inbound to SAP. This is for MB1B Enter Transfer Positing.
    Thanks
    Ricky

    Its WMMBXY

  • How outbound idoc of message type WMMBXY is created? any program or FM name

    Hello Gurus,
    How outbound idoc of message type WMMBXY is created? any program or FM name??
    basic type : WMMBID01... i checked the idoc in my system, it does not have any process code....
    also, i checked the exit : EXIT_SAPLMBMB_001. It has some code but nothing to fill the segments...
    BR,
    Ks

    got the answer in : WMMBXY and WMMBID02

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

  • Stock Transfer to quality without Inspection lot creation

    Hi,
    I want to do stock transfer from unrestricted stock of Plant A to quality stock of Plant B. However I don't want inspection lot to be created.
    Is this possible?
    I am using Movement type 301 and Inspection Lot of type 08 is active in Material Master.
    If I deactivate QM for movement type, can I post to quality without inspection lot creation.
    Thanks

    Do you have any inspection type setup for material in plant B? If yes then you would be not able to transfer stock in QI without creating an inspection lot. If inspection type is active in material master of plant B(destination) then system would through you error message saying - "transfer stock in QM only". The reason is you would not have an option to move stock from QI using 321 (QI to UNR) in plant B if QM is active. 321 managed by an insp lot.
    If inspection type is not setup in material master at plant B then you would be able to post stock in QI without creating an inspection lot. Then move stock from QI to UNR using 321 (MB1B).
    Hope this clarify you.

  • IDOC message type or bapi to create CRM Product hierarchy

    hi all,
    I tried to tranfer the Product hierarchy to CRM using LSMW, it could not transftered by batch input and I could not find any IDOC message type or bapi to create Product hierarchy. it seemed that I could not using LSMW?
    i also found that many BAPIs in CRM were not related with ALE message.so we can not use LSMW using IDOC or BAPI to transfer data?  i will very appreciate anyone who can tell me to solve such problem, especially tranfer data to CRM. thanks so much!

    hi Ramgopal,
    u can check the  bapi-<b>BUS1112</b> for cost center, and from the methods what ever u want u can take based upon requirement
    if u find it useful plz mark the points.
    <b>check the IDOC method with message type COSMAS and basic type COSMAS1</b>
    it should workout now
    Regards,
    Naveen
    Message was edited by: NAVEENKUMAR GUDURI

  • IDOC message type use for standard price ALE

    Hi,
    Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
    ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
    I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data?  thx.

    Hi
    I think the IDOC type will MATMAS01.
    Thanks
    Deepak

  • Goods issue - Message type WMMBXY

    Hello,
    I am using message type WMMBXY and process code WMMB for generating idoc. I need to do goods issue using above setting. Is it possible to do goods issue using message type WMMBXY and process code WMMB?

    Mark,
    The messages
    Delivery has not yet been put away / picked (completely)
    Delivery has not yet been completely processed by WM
    are displayed when you try to do PGI on a WM-relevant delivery that has not been picked completely. I'm not sure what the pick order but we have the SAP system with and without WM and in WM we use "transfer orders" (transaction LT03) to pick the deliveries. In this case the picked quantity field is grayed out in VL02N and it's being updated when a TO has been created. TO also have to be confirmed (LT12, I think), so in our case the reason for such error messages would be that TO is either missing or not confirmed.
    We are successfully using SHPCON with PIC and PGI but only in our non-WM SAP system. In the one with WM I was unable to use IDocs to pick the deliveries due to the strict customer requirememts. So we use BDC (I even wasn't able to find an FM for that) to create and confirm TOs and then use only the PGI SHPCON IDoc.
    I have a feeling that you might need either a different or an additional IDoc for WM to pick the deliveries successfully. Take a look at the WM... IDocs, maybe you need the one that creates the transfer orders or something. Also with DELVRY01 IDoc you can use message type WHSCON, maybe it would work differently (although I didn't notice any difference in our case).
    If there is no IDoc for "pick orders" you might have to create your own ABAP program to run between the PIC and PGI IDocs to perform the missing step.
    Good luck!

  • Report for stock transfer from plant to plant

    Hi,
      Is there any standard report for  stock transfer from plant to plant .
      If not is there any enhancements to get the above report.
    Regards,
    Ravindranath.

    Hi Ravi,
    U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
    if u want the list of stock transport orders then use tcode ME2N and the input parameter as  item category "U" and generate the report.
    hope it wud have answered ur question
    Reward if useful
    Shawn

  • Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)

    Dear all,
    The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
    The question I want to post is relating to the transferred stock value.
    When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
    In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
    If using Stock Transfer process (move stock from depot to manufacturing),
    1. Create Stock Transfer Order in ME21N using UD order type
            no accounting
    2. Create DO in VL10B and goods issue
    During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
       Dr Stock into manufacturing plant  [this value by right, should be reduced as it consists of original excise duties in RG23D?]
            Cr Stock from depot plant
    3. J1IJ- RG23D selection for excise invoice for delivery at depot
        no accounting
    4. VF01 for proforma invoice
       no accounting
    5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
         no accounting
    6. Enter Incoming Excise Invoice by J1IEX
         Dr CENVAT Input AED
         Dr CENVAT Input BED
         Dr RG23A ECess
         Dr RG23A SHECess
               Cr CENVAT clearing
    7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
    If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant. 
    Thank you in advance.

    You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
    You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
    Try this scenario in development server and revert back with your observations.

Maybe you are looking for