IDOC meta deta refresh related query

Hi ,
We are dealing with IDOC to file scenario.  The scenario is created and transported to Production .
Suppose after that we have to add extra field in the IDOC .The ABAP guys  created the new IDOC in SAP system we deleted the old IDOC imported new one  in IR (dev) and done the mapping initally the field was not coming  but after  meta deta refresh (IDX2) the field has succesfully come in PI and sent to destination . We have transported the change ( IDOC and the message mapping ) to other env . Now do we have to refresh the meta deta manually in that environment also? or can we transport the meta deta also in other environment  to avoid manually deletion/updation of meta deta in evry env .
Kindly update me
Regards,
Saurabh

thanks again
Even we were also have the same understanding that we don't need to do any thing extra for meta deta refresh in other env.
but recently we are facing issue in pre prod that  the IDOC(in which extra field has been added ) get struck in ECC and does not come to PI untill we have not manually uploaded the meta deta .  so the client is asking that instead of manual deletion/updation of meta deta can we transport the meta deta or make the process automated .
Regards,
Saurabh

Similar Messages

  • IDoc meta data load problem in IDX2

    I have been trying to load meta deta for some idocs and am getting message 'Basic type <idoc_type> is unknown'. Interesting to note is that I could load ECMMAS01 idoc type but other idoc types like MATMAS01 ..04, ORDERS01 ...04, DOCUMENT_LOAD01 ... and many others that I tried, I got the same message. The config has been done in IDX1 and IDX2 (that's how I got the ECMMAS01 in).
    There is an OSS note '0000751839 IDoc Adapter: Basic type 'XYZ' is unknown.  ' It seems we are already on that patch level. Can't verify if the note has been really applied or not for authorization issues for now. The note also mentions about a workaround to set the category level to '0' (i.e. blank) in the Integration server configuration. But that doesn't seem to help either.
    Anyone else had this problem and resolved it?
    Harshad

    Problem stands resolved. I realized that the RFC destination in XI for the R/3 system had a problem. What still is not answered is how come I was able to import ECMMAS01?!?! One explanation could be that the RFC connection was ok then. Don't know, but I am happy that it works now.

  • Idoc meta data does not come up in trx idx2

    Hi there,
    Im importing IDOC meta data into XI (using trx idx2) from a CRM 4.0 idoc basic type CRMXIF_PARTNER_SAVE_M02.
    No idoc meta data is imported, instead the transaction is giving me back an information message: I::0000
    When I click on the pop-up window, the description provided is only: "Message no.000"
    Does anyone knows what this message really means?
    SLD setup is ok, RFC connections are also ok, IDOC port seems also to be OK.
    Any feedback is appreciated,
    Rob.

    Noriko,
    this error is authorization related. There are a couple of function groups which are called in the target system and the user in the RFC Destination to the target system might not have sufficient authorization. Just look into transaction SU53 in the target and select the user used in the RFC destination. This should show you the failed authorization checks.
    Also SAP Note 940313 some hints on what you can check for this error. 
    Regards
    Christine

  • Error message while refreshing a query

    Hi All,
    I get a error message when i try to refresh a query, the message is "Can only refresh this query against server running 2.0 or higher". Can anyone tell me what exactly this means??
    Thanks in advance
    Kelly

    Hi Kelly,
    Hope you are running the query from Bex. Try running the query in RSRT and check for any error message. Also check for any short dumps in ST22.
    Bye
    Dinesh

  • System error when I refresh a query/WB

    Hi All,
            When I refresh a query/workbook getting following error message and can not proceed further..
    <b>Abort System Error in program SAPLRRS2 and form INITFL_ASSIGN-01</b>
    We are using BW 3.5 and BEX reports.
    I'd appreciate if you could help me on this
    Thanks
    BI Consultant

    What variables are you using in your query? This error essentially occurs when the variable values are not correctly transferred resulting in a high volume data selection. Do you have any mandatory variables in the query? Are they getting filled the first tiem round?

  • IDoc meta data not getting imported

    Hello
    I am trying to get IDoc meta-data using transaction IDX2. I have configued RFC destinations of type R3 in both the systems (ECC and XI). Also I have created port using transaction IDX1.
    When tried to import MATMAS04 using the defined port it gives Information box displaying "I::000" and nothing happens. The information box does'nt contain any message.
    Anybody faced this problem with IDoc?
    Thanks in advance.
    Regards
    Rajeev

    Hi,
    actually it was authorization problem which I noticed when I checked the short dump in ECC.
    anyways thanks for the reply.
    Regards
    Rajeev

  • The workbook report no authorization, but related query can show part data

    Dear All,
    We meet an error, The workbook report no authorization, but related query can show part data.
    We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO'  & ' WZA")(User didn't have authorization for this condition),  and workbook report no authorization.
    Then we checked  authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
    But when we execute the related query with same condition. the query can open and show WZA's data.
    I'd like to know the reason.
    thanks & Best Regards,
    Kent Yu

    Dear All,
    We meet an error, The workbook report no authorization, but related query can show part data.
    We have a workbook, it have 1 queries, and when we key in condition to run it, in one field we put on one more condition(Z3XXX = ' WZO'  & ' WZA")(User didn't have authorization for this condition),  and workbook report no authorization.
    Then we checked  authorization check log and it show "You do not have sufficient authorization on Z3XXX = ' WCO'.
    But when we execute the related query with same condition. the query can open and show WZA's data.
    I'd like to know the reason.
    thanks & Best Regards,
    Kent Yu

  • Loading IDOC meta data into Xi not working

    Hello,
    I'm trying to load IDOC meta data using trx IDX2 but the program is not able to recognize the port "SAPRD1_222" I previously defined in trx IDX1.
    Any ideas, what Im missing here?
    Ruud

    Ruud,
    Pls take a look of this thread:
    Re: Importing Metadate from IDES 4.7 into Integration Server Rep

  • Multi-part related query reports

    http://download-east.oracle.com/docs/html/B10310_01/orbr_concepts1.htm#1012365
    Can someone provide me better info about 'Multi-part related query reports '

    Hi,
    yes you can have multiple query in your report. So you have multiple groups in your data model. Then you must put multiple repeating frames in your layout in order to extract data from your queries, selecting the desired group in the source property of your repeating frame.
    Bye
    Raffy

  • IDOC meta data

    Hi All,
    I am trying a file-idoc scenario. I have imported the IDOC in IR and done with the mappings. I have created a RFC destination to R/3 server of type 3. Also I have created a port in IDX1 with the created RFC destination.
    In IDX2 I cant find the meta data for my imported IDOC. Should I do it manually? If so how?
    Thanks & Regards,
    Jai Shankar.

    Re: Importing Metadate from IDES 4.7 into Integration Server Rep
    Re: IDoc Meta Data Problem
    Have a look into these !!!

  • Refresh a query, by assigning macro to a object

    Hi,
    I am trying to use an object on a worksheet to refresh a query on another worksheet. I am not quite sure how we do it.
    I looked at the thread, BEx query refresh macro
    But, i do not how to use it. please provide suggestions as to how to proceed?
    Thanks,
    raj

    reposting for suggestions, did not solve my problem yet.
    so far what i know is, i have to assign macro to the object but, do i need record the refresh query or do i need to call the standard funtion,
    "Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
    End Sub"
    But, how do i call or assign this as a macro to the object
    peter knoer, can you provide suggestions?
    Thanks,
    raja.

  • Please select a valid InfoObject appears while refreshing a query

    One of the users is trying to refresh a query (showing a hierrachy). While refreshing the user gets the following message: "Please select a valid InfoObject". I just talked to the user and she is saying it appears from time to time. Does any of you had such problem? What is wrong?

    Hello Jesper,
    We got the same problem after upgrade. We have applyed the note you talked about in your post. It fixes the issue.
    Thank you.
    Best Regards,
    Pierre.

  • Prevent Excel from recalculating when refreshing a query within a workbook

    Hello,
    I have a BEx workbook with 4 queries and a significant number of Excel formulas retrieving and rearranging query data.
    **The issue**:
    When Excel>Tool>Options>Calculation is set to "Automatic" (as it should be in normal situations), refreshing anyone query takes about 2 hours.
    When Excel>Tool>Options>Calculation is set to "Manual", refreshing anyone query takes about 2 minutes.
    Therefore I conclude that BEx does not prevent Excel from recalculating during a query refresh and this cause unacceptable delays.
    **Question**
    Is there any way to prevent to temporarily prevent Excel from recalculating during a query refresh ?
    Thank you.
    Louis

    I have a star schema, ie 5 FACT tables and 7 dimension tables, All fact tables share the same dimension tables, some FACT tables share 3 dimesnsions, while other share 5 dimensions.  
    I did adopt the best practices, and as recommended in the book, I tried to resolve them using Context, as it is the recommended option to Alias in a star schema setting.  The contexts are resolved, but I still have loops.  I also cleared the Multiple SQL Statement for each context option, but no luck.  I need to get this resoved ASAP,
    I checked all the context and they look fine, however when I again go to detect context it asks me to add the context which is already present.  It give me an option to overwrite?  Besides, I also get some Alias options.  However I was told and it was mentioned in the book that Alias is not a good option to resolve loops but context is when you have a STAR SCHEMA.
    Please suggest idea.
    AP

  • Refresh BEx-Query with variant

    Dear all,
    i have a question about refreshing Queries with variants.
    To refresh a BEx-Query (BW3.5) in a Workbook with VBA is no problem.
    For example:
    Run "SAPBEX.XLA!SAPBEXrefresh", False, myRange
    But is there a possibilty to refresh a BEx-Query with a variant (also with VBA)?
    My target is to create a VBA-Tool:
    1 which user can select a single Query and the available variant.
    2 Then push a VBA-Button
    3 After the selection no Variable-Screen will pop-up
       and the refreshing is completed.
    Thanks all

    Hi Ashok,
    refreshing Queries automatically on Workbook open is standard...
    What i need is to refresh a Query with variant (saved variable-values for a query e.g. the name of the variant is "ZMYVARIABLES").
    The user should not select an existing variant (ZMYVARIABLES)
    manually with Shift+F5 (Get Variant) on the Query-Variable POPUP-Screen.
    What i need is a codefragment which implement that all.
    Pseudo code:
    Sub RefreshQuery(QueryID As String, Variantname As String)
    End Sub
    Thanks,
    Erol

  • How can I related Query name with Query elements?

    Hello gurus!
    I am working with BI7, content technical, well I need to find out a solution where I can related Query name with query elements (KYF, CKY, Restricted Key Figures, var, etc)
    In master data 0tctquery, exist the query element, but, I can not related with object are from what query...
    Do you know how I can do it??? some solution???
    Best Regards

    "it is impossible to relate both tables" ???
    hmmm... these are exactly the tables the Query Designer uses to "build" up the query... so trust me, they do relate
    now to get this information in an InfoCube is a totally different thing... how do you expect to report on this if you should get it in an InfoCube? let's take a simple example... assume you have a query (QUERY_1) which looks like:
                                      Sales  Sales
    Sales Org Customer    Qty      Value
    1000         ABC           10 PC  500 €
    1000         DEF             5 PC  250 €
    in your Cube you would get:
    QueryName  QueryElement
    QUERY_1    0SALESORG
    QUERY_1    0CUSTOMER
    QUERY_1    ZSLSQTY
    QUERY_1    ZSLSVAL
    if you have free characteristics, you'll add more lines... same for variables, CKFs, RKFs, conditions, ...
    I guess it would be better to create a little ABAP report using the above tables (oh, you'll be needing a lot more tables if you wish more detail)

Maybe you are looking for

  • Plant not found in ME21N (Create PO)

    Hi,    I'm trying to create first PO in IDES 4.7. After i finish header and then enter item that i've create from mm01. But when i press F4 in Plnt field, it say "No values Found". What'd i do? Ps: i use all config from default by system. Purchasing

  • Problem with plasma-desktop

    After upgrading to kde 4.7 I've a problem with plasma: after login my screen is black with no panel. If I open a terminal and i launch plasma-desktop I obtain the following errors: giacomo@arch:~$ plasma-desktop & [1] 8737 giacomo@arch:~$ QDBusObject

  • The data form form name is invalid. Check log for details

    Hi all, i have just built a planning application from scratch and created my first form. i have encountered the error "The data form <form name> is invalid. Check log for details " and i have checked the log file. It reads as follows Unknown calculat

  • How to maintain the source List if record already exist to maintain ME01

    Hi Folks, I've a BDC pgm for t-code ME01(Maitain Source list). which is for creating new contract before expirting one.  Here I am upload a TXT file which contains data like vendor, Plant, date(valid to-valid from), PurOrgn, Agreement ... But program

  • Process Control workflow - want to delete logical steps against one SC

    Workflow issue : Process control workflow In my scenario when requestor is creating a SC then workflow goes to buyer for assignment of supplier but when buyer himslef is creating a SC and forgot to attach supplier then workflow goes to error....i che