IDOC: Missing text in Inbound Del

Hi gurus,
Does anyone know or encountered this scenario:
I created PO, Delivery and Shipment in BoxA. Automatically Delivery doc that has been created will reflect to BoxB via IDOC, as well as the Shipment. Well, it was posted and successful. But the problem is there are missing values in delivery.. Supposedly, there should be header texts defined in the delivery.
I've checked the segments in we02 and the texts are there.. It's my first time to hanle IDOC issues.
Help me...will be rewarded if it works.
Thanks!

Hi,
Maybe the header texts are maintained in a different language other than EN.
FOr this, do a select on STXH..
tables: stxh.
select single tdspras from STXH into STXH-tdspras where Tdobject = ws_tdobject
                                                                            and tdname = ws_tdname
                                                                            and tdid = ws_tdid.
THen,
     call function 'READ_TEXT'
          exporting
                       xxxxx
                       xxxx
                       lang   = stxh-tdspras
We experienced this problem today and resolved it like this.
Try...
Regards,
SUbramanian

Similar Messages

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

Missing text in Firefox, Thunderbird, and Libreoffice

On my laptop, when I run Firefox, Thunderbird, or Libreoffice maximized, everything in the top part of the window is fine. But, there is a line about 2/3 of the way down the window below which there most of the text is gone. (this line may even be halfway throught a line of text, such that the top part of the word is displayed, but the bottom part is not.)
Examples of missing text (all below the line):
In all cases, the text on status bars (like those at the bottom of the window) is gone, however, loading bars are still there.
In firefox, images will be there, underlines for links will be there, but the text will not.
In Thunderbird, the message view is fine, but all of the system status bars, including but not limited to message info and the notifications, such as "this might be a scam" or "Do you want to load the images?" are not. I do not know whether the message entries in the inbox are there because that is always above the line.
In libreoffice, all text, including the actual document text, status bars, and the entries on the start screen (create new text document, create new spreadsheet, etc.) are affected.
However, if I run libreoffice or firefox via Xforwarding over an ssh tunnel from my desktop, everything works fine, subject of course to network latency. (I do not have Thunderbird on my desktop, I use claws instead, which also does work fine.)
Also, if I shrink the window to half-height, then the problem no longer exists.
I have tried reinstalling libreoffice, firefox, thunderbird, the xserver, and my graphics drivers (nouveau) using the --recursive option, and nothing has changed. I cannot tie this problem to any particular system operation (such as an update), but that does not mean that it is unrelated to such an event.
Window manager: xmonad
Desktop environment: none
Video driver: nouveau
Model: Dell Inspiron 8600
Any help with this would be greatly appreciated. I am tired of only using the bottom half of my screen.

Thanks for pointing that out. I probably would have scratched my head over that one sooner or later. Unfortunately, that is not the solution to this problem. Keep in mind that ~2/3 of the window is perfect.

Error message NTLDR is missing - press ctrl alt del to restart

Hello,
I am extremely embarrassed to admit the following and ridiculously angry with myself for doing something as totally stupid as I did, but it is done now..sigh..
I have the NTLDR is missing - press ctrl alt del to restart nightmare error.
This is how it happened. I need(ed) to reformat my hard drive, but first I was going to back up everything. I back up every so often, though, now I know not near as often as I should!. (last back up was 5/21/07 sigh.) Well, not thinking, instead of backing up, I put the restore cd in the drive and the screen came up saying: "loading ramdisk" then I got to the next screen which basically was asking if I wanted to restore out of the box or not. I chose the first step in the wizard which said out of the box. Then I clicked NEXT and realized I had not backed up my files!! So I cancelled out of the restore cd wizard.
When I restarted the computer, I got the aforementioned nightmare error.
I have been researching for many, many hours on how to fix it or at least be able to boot into windows. I've done the following:
1. created a floppy boot disk with ntldr, ntdetect.com, and boot.ini on it to restore I have all but I don't know if the dates mean anything on the ones downloaded from another laptop
this did not work I still came up with the same error or some other errors one pointing to hal\something. i am not sure if it is my boot.ini that is causing the problem or what. Oh, by the way, I went into the BIOS and made sure that the computer booted up to FDD first when trying the floppy option.
[boot loader]
timeout=30
default=multi(0)disk(0)

Hi
Its a very stupid and tricky situation.
The simplest solution would be the HDD formatting and new reinstallation of the OS.
But it seems you want to rescue all the files available on the HDD.
Hopefully its not too late
Hmmm. I think youve got only one chance!!! You have to remove the internal HDD from the notebook and try to connect it to second PC via external USB controller!!!!
Such part is not expensive and can be ordered from every notebook dealer.
You should be able to get the access to the HDD removed from notebook....
After this procedure the HDD should be formatted in NTFS and all partition should be erased!
Then you should try to start the installation procedure from the Windows or Recovery CD.
By the way; I have investigate a little bit in the Microsoft database and found these both documents:
http://support.microsoft.com/kb/318728
http://support.microsoft.com/kb/314057
Maybe some hints described in these documents could be useful.
Good luck

Pages 5.2 Table missing text when printed

I created a document with several tables. These tables contain algebra formulas with superscript. I read in another forum that the issue may be the use of the superscript. However their problem only occurred when printing the document as a PDF. I am having the problem printing from both Pages and as a PDF. Some superscript appears as it should. Not all missing text is superscript.
Any ideas? I hate to have to recreate this document in Word. I took me forever to create.
Mavericks 10.9.3
Pages 5.2

Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

PDF has missing text when created from FM 9

My Software:
Windows XP Professional Version 2002 SP 3
FrameMaker 9.0p255
Adobe Acrobat 9 Pro Version 9.4.1
When generating a PDF document from FrameMaker, the PDF document has random missing text, including whole paragraphs, sentences and some text in tables. We have several FrameMaker books and they are all having the same issues. These books were fine when we last published updates within the last month and we have not made any changes to fonts.
When generating a PDF from FrameMaker, we always print the book to a postscript file first following these steps:
- Go to File > Print Book.
- Select the Adobe PDF printer.
- Select the Print to File option and specify a .ps filename.
- Select the Generate Acrobat Data option.
- Use Acrobat Distiller to convert the PS file to PDF.
Note that I also tried File > Save As PDF and got the same results.

Did you reboot after the hotfix? fwiw, other users on the forum have had difficulty with the hotfix not being installed correctly the first time around.
once you download the hotfix from MS you have to run the .exe, and then when it’s finished you have to reboot. Then check the Add or Remove programs in Control panel, and click the “show updates” button, then scroll way down to see the hotfixes, to be sure that #952909 is shown.
What fonts are you using in your documents? Specific type (PS, TT, OTF) and any other info you have (foundry, etc).
Do the "gaps" seem to occur when there are font changes in the document, e.g. when words in a sentence are bold or when a paragraph in a different weight (e.g. bold italic) follows, say, a "regular" text weight paragraph? As another test, can you highlight a segment of good+bad+good text in the PDF, do Control+c to copy it to the clipboard, then Control+v to paste it into a different file (Word, text editor, even another new FM document). Do the words of the "missing" text segments show up?
edit: the hotfix download process is a bit confusing; if I remember correctly it has to be requested, then MS sends a link to the download webpage, then the downloaded .exe has to be run.

Randomly Missing Text in PDF Created from FrameMaker

This problem relates to a structured FM document, but I suspect it might be a general issue and have posted it here in the general forum for that reason.
I am generating PDFs that are missing text somewhat randomly throughout. I tried searching the forum for solutions, but none of the suggested fixes worked and none of the posts specifically addressed the issue I am experiencing.
I am working in structured FM. The templates we use were originally created for FM8. We use both FM8 and FM10 in our work group. We are able to duplicate the same problem in both versions and on multiple computers.
I thought I had narrowed the problem down to certain paragraph formatting, since it only ocurs in three or four paragraph formats (a bullet list, table text, etc.) Garden variety formatting. But in most places in the document, these formats appear perfectly. The strangest occurence is a single intance where the page number is missing from the footer.
I thought it might be a font issue, as I've had similar issues in the past. I had a missing font warning in the console, but I am pretty sure that this has nothing to do with it, since they are fonts we are not using and all the other text from the same formats appears.
I tried turning off "Remember Missing Font Names" in preferences. No help.
I checked that the fonts are in the local directory and appear as embedded subsets in the PDF.
I also tried checking and unchecking the "Rely on system fonts only; do not use document fonts" option in the PDF output settings. Also no help.
The randomness of the missing fonts bewilders me and I've exhausted my own troubleshooting abilities. I would be happy to share a source file if anyone thinks they could help me that way.
Thanks in advance,
Douglas

There is a known bug in Windows XP that causes random dropped text in
PDF. The hotfix is here, though the link does not seem to be working at
the moment:
http://support.microsoft.com/?id=952909
However, the above link directs you to a download link that is here:
http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us <http://support.microsoft.com/Hotfix/KBHotfix.aspx?kbnum=952909&kbln=en-us

Missing texts in WEB with F4-help combined with variable input.

I've defined a characteristic with text : short text, medium length text and long text. The texts are language independent.
I've defined a variable for this characteristic and I've defined a BEX-report that provides a variable-filter for this characteristic in the filter area. I've also set the property Display as to text or Key and Text
When I start the report the prompt-window appears and then I can perform F4 on the input field for this characteristic. Then a selection box opens showing the key and all texts - short desription, medium descr. and long desc.
If I use this report in the web-Application designer or if I launch this report directly in the WebBrowser I'll also get a selection box but no texts appear.
What can I do to see these texts also in WEB ? Where can I influence the search help for the web (in BEX it works perfectly) ?
Additional information: By defining the info object there is a tab for Business Explorer settings. For general settings I've choosen Text for the property Display. What is really strange is that in Bex-Explorer the property Display as always shows Key as a default although I've entered Text in RSA1. I've also inspected other characteristics where there are no missing texts. Here I've found out that in the info object there is Text choosen as attribut for Display -> in the Bex itself Text is shown as a default too.
Message was edited by: Stefan Vogler
Message was edited by: Stefan Vogler

Hello there,
I am having a similar problem but I have found this is due to either of two reasons.
1) The object is compounded
2) The compounded object is authorisation relavant and the security is stopping the masterdata being read properly.
Hope this helps narrow down your search.
Paul

Missing text in RoboHelp 7 when previewing/generating Frame files

This is a new issue for me. Until last week, it seemed to work fine. Now, though, whenever I import by reference my frame files I have noticed that, while they look fine in the Design view, when I click Preview it has missing text in parts. In one file, which was all text (no graphics), it was completely in Preview. Then, when I generated the help, that topic was still blank.
This doesn't always happen, though. Sometimes a topic is fine up to a point, then, all the text is gone, leaving only the screenshots. It generates that way also. On the other hand, some files come out fine, with no missing text. (This is only apparent in the Preview and generated help.)
I'm using TCS 1, that has RoboHelp 7, and I generate to WebHelp. I've applied an update that makes it 7.01.001. I've also applied the "missing space" fix that Peter Grainge suggested (it worked ).
Like I said, TCS worked fine up to last week, then I started seeing these missing chunks of text. I tried creating a new RH project and starting all over, importing only one small file that had all text and no screenshots/graphics. Both the preview and generated help came out blank, although I could see it plainly in the Design view before generating.
Has anyone else had this issue, or know what it might be?

Below is from one topic that didn't show any content at all for Preview or generated output, (taken from RH). That is, it showed nothing when I opened it in IE9, but in Firefox it displayed just fine. I tried replacing <head> with the one above (in the output), but it didn't seem to do anything. I'll keep trying, though!
dan
=============================================================================
<!doctype HTML public "-//W3C//DTD HTML 4.0 Frameset//EN">
<html><head>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<meta name=Originator content=ImportMif>
<meta name=OriginalFile content="C:\CVS\doc\integrator\6.0.0.0\RoboHelp\CIS_RH\IDE\ide3.fm">
<meta name=generator content="Adobe RoboHelp - www.adobe.com">
<meta name=generator-major-version content=0.1>
<meta name=generator-minor-version content=1>
<meta name=filetype content=RoboHelp>
<meta name=filetype-version content=1>
<meta name=page-count content=1>
<meta name=layout-height content=6060>
<meta name=layout-width content=921>
<title>File_Transfer</title>
<link rel=stylesheet href=ide3.css>
</head>
<body>
<h1><a name=XREF_File_Transfer></a>File Transfer</h1>
The File Transfer dialog allows users of client-only
installations who are remotely connecting to the Host Server to manipulate
the files on the remote machine.
Use the File Transfer dialog to copy files to a fixed
directory on the server called shared_files.
This directory resides within the root. A status dialog opens during the
operation showing progress, and includes the file name and the percentage
of the operation that is complete/remaining.
The shared_files directory
is automatically created the first time File Transfer is used. 
<h2>Using the File Transfer</h2>
Select File>File Transfer
to open the File Transfer dialog.
<div style="text-align: center;" align=center>
<implicit_p><img id=15 src="ide300016.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
The shared_files folder is
the top-level folder from which users manage files and folders. 
<h2>Menu Bar Options</h2>
<h3>File Menu</h3>
New Folder 
Creates a new directory on the server within the user-selected folder.
Type the new folder name in the Create New Folder dialog and click OK. 
Transfer File 
Specifies a local file to transfer to the server. Once the file is selected,
the user can initiate the file transfer.
Move Folder/File 
Moves a file or directory from one location within the shared_files
hierarchy to another location.
Rename Folder/File 
Renames a directory or file within the shared_files
hierarchy. Type the new name in the Rename File/Folder dialog and click
OK. 
Delete Folder/File 
Removes a directory or file from the remote server. 
Properties 
Shows information about the selected remote file or directory, including
file size, modification time, and name.
Refresh 
Updates the screen to show the latest information.
Close 
Closes the dialog. 
NOTE: Right-clicking a folder or file
on the File Transfer dialog opens a pop-up menu with the same File menu
options (except Close).
<h2>Status dialog</h2>
To monitor the progress of the transfer, a status dialog
opens when a file transfer begins. 
<div style="text-align: center;" align=center>
<implicit_p><img id=16 src="ide300017.jpg" style="width: 314.249pt; height: 149.250pt;"
width=419 height=199 border=0>
</div>
 
The following information is provided:
File 
Names the local file being copied.
Status 
Specifies the text status of the copy operation.
Copied To 
Specifies the destination file location on the server.
X of Y 
Specifies the number of bytes transferred out of the total number of bytes.

Progress Bar 
Provides a visual indicator of the copy operation’s progress.
<h2>Additional Information on the File Transfer</h2>
<h3>Concurrency and Synchronization</h3>
Only one file copy operation can occur at a time. Multiple
users can, however, transfer files to the server simultaneously and manage
separate folders on the server. 
<h3>Security</h3>
Users cannot manage files and folders outside of the
shared_files root. 
<h2>How to Transfer Data</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer
on the IDE. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the shared_files subfolder in which to place
the transferred file.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Transfer
File. This opens a file selection dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Specify
the local file to transfer to the selected shared_files
subfolder. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
Start on the status dialog.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=17 src="ide300018.jpg" style="width: 314.249pt; height: 149.250pt;"
width=419 height=199 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Click
Done when the transfer is completed.</li>
</ol>
<div style="text-align: center;" align=center>
<implicit_p><img id=18 src="ide300019.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<h2>How to Create a New Directory</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
where to place the new folder.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>New Folder.
This opens the Create New Folder dialog. </li>
<div style="text-align: center;" align=center>
<implicit_p><img id=19 src="ide300020.jpg" style="width: 264.000pt; height: 94.499pt;"
width=352 height=126 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Type
the new folder name. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. The new directory folder appears in the
directory structure.</li>
</ol>
<div style="text-align: center;" align=center>
<implicit_p><img id=20 src="ide300021.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<h2>How to Move a File or Directory</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the file to move.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=21 src="ide300022.jpg" style="width: 320.999pt; height: 238.499pt;"
width=428 height=318 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Move Folder/File.
This opens the Select Move Destination dialog. </li>
<div style="text-align: center;" align=center>
<implicit_p><img id=22 src="ide300023.jpg" style="width: 280.499pt; height: 214.500pt;"
width=374 height=286 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Highlight
where to move the file. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
</ol>
<h2>How to Rename a Directory or File</h2>
<ol start=1><li style="list-style: decimal;" type=1 class="p-NumList">Select File>File Transfer.
This opens the File Transfer dialog. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Select
the file to rename.</li>
<li style="list-style: decimal;" type=1 class="p-NumList">In
the File Transfer dialog, select File>Rename Folder/File.
This opens the Rename File/Folder dialog.</li>
<div style="text-align: center;" align=center>
<implicit_p><img id=23 src="ide300024.jpg" style="width: 278.249pt; height: 94.499pt;"
width=371 height=126 border=0>
</div>
 
<li style="list-style: decimal;" type=1 class="p-NumList">Type
the new name. </li>
<li style="list-style: decimal;" type=1 class="p-NumList">Click
OK. </li>
</ol>
</body>
</html>

Missing text in PDF when I use Acrobat 9.2 and FM 9

I was able to PDF ok from FM9 using Acrobat 6, but when I upgraded to Acrobat 9.2,
I'm getting some missing text in the PDF. Some non-bold text is missing. The number
for Chapter 3 is missing in the TOC. Any suggestions?

I was able to PDF ok from FM9 using Acrobat 6, ...
What font name, format (TTF, PFB/PFM, OTF?) and vintage?
Did you upgrade the fonts when upgrading the apps?
Any chance you have multiple copies of the same typeface name installed? Historically, having both the TTF and PFM (Type 1) of the same name installed could have undesired results.
... but when I upgraded to Acrobat 9.2, I'm getting some missing text in the PDF. Some non-bold text is missing.
What is "some text"? Some entire typefaces (all text thereof), or just some characters of a typeface, like, say, the ligatures in Helvetica.
The number for Chapter 3 is missing in the TOC.
What font is Frame looking for?
Also, are you embedding the fonts during PDF creation?

Using Create PDF from Web Page; Resulting PDF is missing text

Trying to create pdf's from various web pages. Generally process works very well but some pages have missing text and bad formatting. Specifically; http://www.robinhood.ca/Recipes/Occasions/Spring/Apricot-Tartlets
When I create the PDF; I am missing the text under "directions" and the description is truncated and forced to the far right.
Seems like I am missing a formatting or font setting but I have adjusted everything I can think of and have had no luck.
Running Acrobat Pro XI.
Anybody have any thoughts?

yes; looking at the source; seems that <table> is being captured correctly but the part that is missing is a <div>. I'm not an expert at deciphering the page source but seems like that is the problem.
Is there a work around?
when I print via the firefox plugin it prints fine. but i ultimately want to capture several layers on the site if I can get the formatting resolved.

Missing text after EXPORT from PMD to PDF

Hi,
I have a document, designed through Adobe pagemaker 70, which I would like converted to PDF. Within Adobe PageMaker 70 I performed a File-->Export-->Adobe PDF, kept all the default options and managed to generate a PDF version of the *.PMD document. However, some of the text in the PDF document is missing. I searched on the internet and discovered one can do Document-->Examine Document within Adobe Acrobat 9 Pro to display any hidden text. Doing this I was able to see the missing text.
There is an image in the source Pagemaker document, but the image is not square but cropped along it's outside edge and the text flows around the edge (hope that makes sense). What's puzzling is that in Adobe Acrobat 9 Pro the generate PDF has the image displayed in a box and some (not all) the text behind this box is shown as hidden, where as in the source document all text flowing around the image is visible.
Can anyone please help with this problem and tell me how I can get the hidden text in my PDF document to display so it's visible in an Acrobat Reader or when printed?... I am still a bit of a newbie with both Pagemaker and Acrobat so your help would be much appreciated.
Thanks in advance.
Sharon
PS: I have not uploaded the file but do not mind doing so if some one is able to help and requests either the source PMD file or the generated PDF file

Hi,
The "question mark" displayed may be refereed to the missing font.
Are you trying to convert a public web page? if yes then please share a link so that i can also test it.
Regards,
Anoop

Missing Text when using CONVERT to PDF

I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
If I create the PDF with the PRINT command - everything is OK.
PS: The same Publisher File on another computer using Acrobat Pro 8 works fine - CONVERT or PRINT and no missing text
I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
[edited by forum host - email removed]

Hi,
Could you mail be the file with which you are seeing the issue. I will investigate at my end to see what the issue is. You can mail me at [email protected]
Thanks,
Love Bisht

PDF missing text when browsing or linking to a page

Hello,
I have an issue with missing text in a PDF file when I try and browse directly to a page in a PDF. Interestingly, the text is not missing when you open the PDF and navigate to the same page from within the PDF. The first Character(s) of the title are missing.
The title of this page should say Criminal Justice, but the "C" is missing when you visit this link--
http://www.northeast.edu/Degrees-and-Programs/pdfs/2010-Catalog.pdf#page=103
This only happens if you try to navigate directly to a page. If you use the pagers within the PDF then the text is fine. If you change the link in the url to represent the page you are trying to visit, the characters disappear again.
Any thoughts or suggestions would be very much appreciated.
Thanks!
Derek

Acrobat 9 (professional)
Windows XP
Internet Explorer 7, 8
PDF file is published as compatible with version 6. Original document was published as PDF from Indesign.
Hmmm, I have tested on 4 machines and still get the same results. These machines are all XP/IE machines though. Any other thoughts?

Random missing text in brochure

I am new to this discussion board but am so happy to have found it.
I am working in XI. I have two brochures that are missing some text on a few page and is fine on all others. The brochures were created in InDesign. I have opened one of the updated bochures from last year and it is fine. It is also fine when I view from Acrobat. Any suggestions on what the issue is or how to fix?
Thank you for any help you can offer.

No missing text in Safe Mode.
First time unchecking hardware acceleration fixed it. I decided to check if it was really that by checking it again and seeing if it disappeared again. It did. Then when I tried to uncheck it again, the text was still missing and I couldn't fix it again. But after some back and forth of switching from safe mode to normal and vice versa with the hardware acceleration unchecked, the text reappeared again. So I decided to leave it since its fixed for now. Thank you so much for your help.

IDOC: Missing text in Inbound Del

Similar Messages

Maybe you are looking for