IDOC not available in intergeration Configuration
Hi
I have buld a screnaio from IDOC->XI->DB2
In intergeration configuration when i create receiver determination the IDOC is not available in the list of the softwatr compoent where as it is in Intergeration repository.
Can you tell me wht can be done in this case to get the IDOC.
Regards
HI,
In Receiver Determination or Interface determination you need to specify the sender Service.
Is it Business Service or Business System.
When you will open the right side icon to fill-up the IDOC name in the Interface parameter then you will get check box stating that Software componenet specific or All. Select All and see if you are getting the IDOC name.
If you are using the Business Service then, double click on Business Service Name under Service Without Party.
It will open the Business Service check in Sender tab if the IDOC name as interface is added or not. Its missing out so you can't see the IDOC name while creating Integration scenario objects.
Similarly you can test for Business system also, but for it you can't add IDOC name entry in Sender tab. You need to approach above process.
Thanks
Swarup
Similar Messages
-
Idoc not available in PI import objects
Hello Guru's
We are using SAP AFS6.3 and PI 7.0 .
The Basic Idoc type /AFS/MATMAS05 and /AFS/ORDERS06 is not avialable in PI imort objects. Is thete is any seetings we need to active either
in AFS or PI system for getting these Idoc in PI.
Please help in this regards
SAHi , i did following
1. Under the SWCV Go to the Imported Objects.
2. Right click on the IDoc and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword of AFS system.
4. Select the IDoc u want to import.
5. Execute the import and the IDoc is imported under the SWCV.
In above step 4. ..m not able to see the /AFS/MATMAS05 Idoc how i can select???
List doesn't have AFS related Idoc. But same idoc i can see in AFS system.This is my problem.
How do i get the Idoc in 4 step List.
Rgz
Subham -
Redemption code used to download app is not available in apple configurator to install app
I had to type in a redemption code to download the Kakooma app to our itunes library so we could copy it over to our Apple Configurator. Now when I have setup all the 26 Ipads through Apple Configurator it is telling me on the 26th Ipad that the redemption code has already been used. How do I work around this or fix this problem of applying the redemption code that was used to download the app to the Ipad? Please help. I have one student who can't practice their math facts on the Ipad.
Wait unti the app is done downloading in your iTunes. Then go back to your VPP account and down load the spreadsheet again and upload into configurator. The process is a pain, but the only way it works for you to get all of your codes into configurator.
-
Partner profile not available.
Dear Folks,
i am doing the scenario JDBC to IDOC. For that i did all the necessary ALE settings and configured the systems. While executing that scenario. In we02, i am getting the error partner profile not available eventhough i configured it. From the error i found that, in technical info, partner number and port are different. And i am getting some Default parnter number and port.
From my observations, i checked the Sender business system and i found that, logical system which was mentioned for this business system is replicating as a default parnter number in the technical info.
please guys i need your valuable suggestions to eradicate this error.
Regards,
DileepHi Mark,
I checked the payload and i am not using header mapping.
I tested the same by doing some modification like, In sender business system, i replaced the default logical system name with which i am using.Then idoc status is changed to status 50. But i am getting the Default port as previously said.
one more thing is , whenever i am getting this partner profile error, it is hitting one of my Company portals. i.e., displaying this partner profile issue in MSS(managerial self service) of HR Portal.
I was little bit confused of why it is hitting the portal?
what would be the key point for their connection?
Please help.
Regards,
Dileep -
IChat server admin Service Running, status not available
X-Serve running 10.6.8
I noticed the other day thaat when I look at the iChat service in Server Admin, I observed the following:
iChat service is: Running
Start Time: Not Available
Domain: Not Available
Client Connections: Not Available
The log screen says No Log Files exist
I have seen similar screens when there was a slight lag in server admin gathering information to display on screen. This stays this way indefinately. The service is working as far as I can tell, IE people can log in, add each other, and chat. A log file is in fact being used and updated (/var/jabberd/message_archive/)
I noticed this because I was trying to autobuddy.sh, I script I use often to update when I add new users to the organization so they show up in everyones group list. I attempted to stop the service from the command line using:
#:serveradmin stop jabber
#:jabber: state = RUNNING
and was never able to stop iChat. The system behaves the same after a reboot. I am not sure what to do, or what the actual problem is. The only thing besides a reboot that I tried was a permission repair from within the OS.
In the log below I removed some user specific information because they are user names for users on my network. This server and service is internal only.
the console logs I have this:
Nov 30 10:29:55 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:30:15: --- last message repeated 2 times ---
Nov 30 10:30:19 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:31:05 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:49:17 aphrodite com.mycompany.autobuddy[83710]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 11:19:17 aphrodite com.mycompany.autobuddy[87010]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:49:17 aphrodite com.mycompany.autobuddy[90323]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: checking user "jimrumrillcotaoilcom" access for service "chat"
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:04:26: --- last message repeated 2 times ---
Nov 30 12:05:25 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:26: --- last message repeated 1 time ---
Nov 30 12:06:26 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:57: --- last message repeated 1 time ---
Nov 30 12:07:27 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:08:28: --- last message repeated 1 time ---
Nov 30 12:08:28 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:26: --- last message repeated 1 time ---
Nov 30 12:09:29 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:59: --- last message repeated 1 time ---
Nov 30 12:10:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:11:30: --- last message repeated 1 time ---
Nov 30 12:11:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:12:00: --- last message repeated 1 time ---
Nov 30 12:12:31 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:13:32: --- last message repeated 1 time ---
Nov 30 12:13:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:14:26: --- last message repeated 1 time ---
Nov 30 12:14:33 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:15:34: --- last message repeated 1 time ---
Nov 30 12:15:34 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:16:35: --- last message repeated 1 time ---
Nov 30 12:16:35 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:17:05: --- last message repeated 1 time ---
Nov 30 12:17:36 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:18:37: --- last message repeated 1 time ---
Nov 30 12:18:37 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:17: --- last message repeated 1 time ---
Nov 30 12:19:17 aphrodite com.mycompany.autobuddy[94140]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 12:19:38 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:53: --- last message repeated 1 time ---
Nov 30 12:20:39 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:20:45: --- last message repeated 1 time ---
Nov 30 12:21:40 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:10: --- last message repeated 1 time ---
Nov 30 12:22:41 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:47: --- last message repeated 1 time ---
Nov 30 12:23:42 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:24:26: --- last message repeated 1 time ---
Nov 30 12:24:43 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:25:10: --- last message repeated 1 time ---
Nov 30 12:25:44 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:26:45: --- last message repeated 1 time ---
Nov 30 12:26:45 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:27:16: --- last message repeated 1 time ---
Nov 30 12:28:24 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:29:00: --- last message repeated 3 times ---
Nov 30 12:29:00 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Any help on what might be going on or a push in a direction would be greatly appreciated.
Thanks!Well I searched the forums here and I found some similar issues, however the fix's I was directed too did not resolve the problem.
I did notice this today after reading a post regarding the use of the .local domain name, and fixing that fixes this issue:
When i selected my server on the left hand side of server admin, click on settings at the top (the gear) then on Network, I see:
Ethernet 1 (eth0) IPv4 192.1.1.4 Aphrodite.local
I am not sure where the .local is coming from. This is an internal server and has been configured with a FQDN for 2 years now, aphrodite.cotaoil.net. On the server, the only other place I see the .local, is in system preferences, sharing, at the top it has my fqdn, but when I click on edit, it has a local host field that says Aphrodite, with a .local greyed out after, or ghosted.
When I use the command changeip -checkhostname I recieve:
changeip -checkhostname
Primary address = 192.1.1.4
Current HostName = aphrodite.cotaoil.net
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
the hostname not available message is new (well I know at some point in the not too distant past I did not have this message) so I am not sure if an update broke this or not but basically I am not sure where to go from here.
The DNS settings are set the same as they were when I originally set up the server. Reviewing DNS logs, I do not see anything abnormal.
additionally when I run scutil i get:
aphrodite:~ root# scutil --get LocalHostName
Aphrodite
aphrodite:~ root# scutil --get ComputerName
Aphrodite.cotaoil.net
I am a little stumped as to where to go from here. I believe based on some other posts Ive read that this may have something to do with why I cannot see any iChat status and am recieving the dreaded "detailed service status not available until network configuration completed"
Thanks for any and all thoughts. Currently reviewing Hoffs tutorials, but I used combined Hoff tutorials and apple server guides when originally set up the server. Please let me know what I did wrong (besides my internal IP range) -
IDOC is Getting Fail with - 56 Status EDI Partner profile not available
Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port BLANKKKKKKKKKK
Partner Number CLNTDEC110 Logical system for Client
Partn.Type LS Logical system
Function BLANKKKKKKKKKK
Port SAPDPI
Partner number CLNTSAMPLE
Partn.Type LS Logical system
Partner Role BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
<IDOC BEGIN="">
<EDI_DC40 SEGMENT="">
<TABNAM> </TABNAM>
<DIRECT>2</DIRECT>
<IDOCTYP> </IDOCTYP>
<MESTYP>INVOIC</MESTYP>
<SNDPOR>SAPDPI</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>CLNTDPI100</SNDPRN>
<RCVPOR>SAPDEC</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>CLNTDEC110</RCVPRN>
</EDI_DC40>
Regards
PSCheck the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas -
Error while posting Inbound Idocs-"EDI: Partner profile not available"
Hi,
I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs.
I have done the following steps so far
1.Created IDOC basic Type and Message Type. (Custom)
2. Created process code to process the IDOC.
3. Use the FM IDOC_INBOUND_WRITE_TO_DB to create the inbound IDOC.
4. Use the FM IDOC_START_INBOUND to process the IDOC.
Is ther anything else that i have to do inorder to post the idoc sucessfully.
Thanks in advance
-Nishant
Edited by: nishant patel on Nov 13, 2009 10:35 AM
Edited by: nishant patel on Nov 13, 2009 10:41 AMHi,
Check in WE20 if the partner profile is configured for the idoc type and the message type. That might be the cause of the error.
Also make sure the same partner profile details are sent to the control record. Partner profile details are stored in the table EDP13.
Hope this helps
Regards
Shiva -
BCExeption: The IDOC metadata for null is not available in SID
<h3>Hello Guys,</h3>
we need some information about the error message:
com.wm.pkg.sap.BCExeption: The IDOC metadata for null is not available in <SID>
We use a Business Connector 4.8 and the backend is an ECC 6.0, we have an inbound xml scenario with FTP.
We pick up the ORDRSP from the vendors ftp-server and we would like to drop it to our backend system.
We can read the xml file into a string, but not send to the backend system, we use following steps:
- bytesToString
- stringToDocument
- documentToRecord
- recordToIDOC
- lockSession
- createTID
so far works perfekt
- sendIDoc
- releaseSession
On the step "sendIDoc" we see the described error message, but what is the message from the message?
Any Ideas?
Thank you and regards,
MichaelHello Michal,
thank you for your quick answer!
In my opinion, i don't need any input for this service, because we pick up all data from the vendors ftp - server in a definied time interval.
All needed fields are available in the xml file. In the result tab is the IDocList filled correct, but no sending to the backend system because the error is displayed.
Is it a problem with my concept?
Regards,
Michael -
RSAR2318 : IDoc type for source system T90CLNT090 is not available
Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MSM Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate -
RSAR238 : IDoc type for source system T90CLNT090 is not available
Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
DhanapalHi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy -
Custom Attribute not available in Available Fields section of Configuration
Hi Experts,
My requirement is to add a custom search field in contact search screen. For that i tried various options
Option1
Added a model attribute in component/view BP_CONT SEARCH/Search. The attribute got successfully added. But when i opened the Configuration tab, i could not see the attribute in the available fields.
Option 2
In the view CRMVC_SDESIGN, i created a new entry for my attribute in object type: BP_CONTACT and design object . But doing so, i got an error and was not able to add my attribute
Option3
Since the View context node 'Search' is bound to the Component Controller Context node 'Search'. I created my custom attribute in compoennt controller also. But this also did not help.
Option 4
I deleted the enhancement of the view and created a new enhancement. I created a value node in Search context node. But still the attribute is not available in the Availble Fields in the Configuration of component/view BP_CONT_SEARCH/SEARCH.
Kindly provide your valuable suggestions to resolve this issue.
Regards,
Radhika
Edited by: Radhika Chuttani on Jan 6, 2012 7:28 AMHi Radhika,
You need to enhance the search query structure as well in order to get the field in the configuration.
You can find the BOL structure for the corresponding context node bol model.
In your case, the BOL model is the search object 'BuilContactAdvancedSearch'.
The corresponding structure can be found at the BOL Model Browser, under Dynamic Query Objects
for the search object 'BuilContactAdvancedSearch'. The corresponding structure 'CRMT_BUPA_IL_CONP_SEARCH'
has to be enhanced with the new custom attribute. Only then, this field would be available in the configuration
when the following htm code gets executed when you open the configuration tab.
<thtmlb:advancedSearch id = "advs0"
fieldMetadata = "<%= controller->GET_DQUERY_DEFINITIONS( ) %>"
header = "<%= SEARCH->get_param_struct_name( ) %>"
fieldNames = "<%= controller->GET_POSSIBLE_FIELDS( ) %>"
values = "//SEARCH/PARAMETERS"
maxHits = "//SEARCH/MAX_HITS"
ajaxDeltaHandling = "false"
onEnter = "search" />
Here you can see that, it reads the parameter structure using the method SEARCH->get_param_struct_name( ) of
the context node.This is used for configuration as well.
Also if you have an F4 help for your custom attribute, you have to add it in the GET_DQUERY_DEFINITIONS( ) of the
view controller. These additional information will help you to understand better.
Regards
Leon
[SAP Community Network Forums on mobile|https://cw.sdn.sap.com/cw/ideas/7910] -
IDoc Receiver, Error in we02 - EDI: Partner profile inbound not available
Hi All,
I have a problem when creating a receiver IDoc from XI to R/3.
I have successfully tested the IDoc when populating the receiver information from the payload. However I want this information to be populated automatically based on the logical systems.
When I do this I get the following error in the IDoc in R/3:
EDI: Partner profile inbound not available
In the control record the sender information is all correct but in the recipient information the partner Number with type LS is populated, but port is not populated.
I have done the following steps.
the sender is a Business Service so I have created a logical system directly adapter-specific identifiers in the sender service in the integration directory.
In the receiver business system I have imported the logical system into the adapter-specific identifiers in the ID from that specified in the SLD.
In the receiving R/3 system using SALE/BD54 I have created a logical system for the source system.
In the receiving R/3 system using we20 I have created a partner profile of type LS with the same name as the source logical system.
IN PI/XI system in transaction IDX1 Ive created a port (SAP<SID> where <SID> is the system ID of the receiving R/3 system) and the client of the R/3 system, and the RFC destination of that system (<SID>CLNT<clnt>, as specified in SM59).
In the IDOC Adapter (receiver) I have entered the RFC destination and port matching those created above. All checkboxes are UN-checked eg. take sender from payload, take receiver from payload, Apply control record values from payload, etc. are all NOT checked.
I think that Ive done everything correctly, but I get the error in we02 in R/3: EDI: Partner profile inbound not available.
Any help will be greatly appreciated (and rewarded, obviously).
Thanks,
Matt.HI Matt,
Can you please copy paste the exact error message....In your error message it will show you Exact partner Number / Logical System name and other parameters...just compared if you have all parameters set in your partner profile comparing to error message...
If you can giev screen shot of both..then probably would be easy to point out error.
Hope this will help.
Nilesh -
hi Guys,
working on below error if anyone has work around.
It is on SQL Server 2012 cluster.
The SQL Server specified in Integration Services service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring
the Integration Services Service" in SQL Server 2012 Books Online.
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachHi Logicinisde,
This issue might be caused that we install named instance on the machine, or the default instance listening a different port rather than the default one.
To solve this issue, please refer to the following article for detail information:
http://blog.sql-assistance.com/index.php/there-is-no-default-instance
Regards,
Elvis Long
TechNet Community Support -
IDoc eror as "EDI. Partner profile not available
Hi All,
I got IDoc eror as "EDI. Partner profile not available " in WE09. Please clarify as to what exactly the error message means, " EDI. Partner profile not available ".
Thanks
YashYash
I guess you need to maintain partner profile for that Business Partner using T code WE20. That's what it means. -
The SSL support feature is not properly configured. Https is not available.
Hi all
We get the following warning message even though we are not using SSL.
"The SSL support feature is not properly configured. Https is not available."
I tried with the following parameter set to false in the MobileEngine.config, still the same warning occurs for each synchronization done. But the sync works fine.
MobileEngine.Security.SSLSupport=false
Had any body come accross this one, if so please let me know.
Thanks
RajHi Raj
The error "The SSL support feature is not properly configured. Https is not available" will not cause any problems for you during synchronization. The reason that this error is displayed is due to the fact that by default MI is configured to support HTTPS Synchronization and not HTTP. This is because it is recommeded to use HTTPS sync inorder to transmit data in a secure manner and this is very necessary in customer production system. This so called error will not have any impact on sync but is just an information to the administrator. This can be disabled by the use of parameter <b><i>MobileEngine.Security.SSLSupport=false</i></b> but make sure that this parameter is set to false even before performing the first sync i.e before obtaining a device id. If you set this value to false after performing some syncs, the error is still visibile in either the Web Console or the NetWeaver Administrator because it would have been sent by the previous sync and these statments are retained and never purged. Hope this helps and clarifies your doubts.
Best Regards
Sivakumar
Maybe you are looking for
-
Error message on iPad using safari and iMessage/ FaceTime.
I'm having trouble with my iPad (3). Just recently I keep getting the same error message when searching using safari, it says cannot open page as too many redirects occurred. I've tried closing all tabs, clearing the history and clearing cookies and
-
Simplest way to password protect an external drive??
I want to clone my Macbook onto an external drive - I don't want to have to turn on filevault - never used it - i would ideally like to password protect the "Macintosh HD" icon on the external drive.... is there a really simple way to do this?
-
Can Powerbook connect to Sony LCD flat panel properly for simul. display?
I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display. While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv conne
-
Create directory from procedure using IN parameter-Directory name with path
Hi, I wrote a procedure which takes directory name(C:\temp) as IN parameter and create oracle directory using EXECUTE IMMEDIATE by the procedure. Proc compiled fine but when i try to execute it (exec prc_lx_e_m_fund_activty ('C:\interface','test1.txt
-
Live Cycle Form problems - bug or user error?
At work my assistant and I have created an interactive form from an Excel spreadsheet and then proceeded to add drop down boxes in numerous locations on the form. However, when we try to create a pdf in live cycle (8), the drop down boxes pre-populat