Idoc not available in PI import objects

Hello Guru's
We are using SAP AFS6.3 and PI 7.0 .
The Basic Idoc type /AFS/MATMAS05 and /AFS/ORDERS06 is not avialable in PI imort objects. Is thete is any seetings we need to active either
in AFS or PI system for getting these Idoc in PI.
Please help in this regards
SA

Hi , i did following
1. Under the SWCV Go to the Imported Objects.
2. Right click on the IDoc and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword of AFS system.
4. Select the IDoc u want to import.
5. Execute the import and the IDoc is imported under the SWCV.
In above step 4. ..m not able to see the /AFS/MATMAS05 Idoc how i can select???
List doesn't have AFS related Idoc. But same idoc i can see in AFS system.This is my problem.
How do i get the Idoc in 4 step List.
Rgz
Subham

Similar Messages

IDOC not available in intergeration Configuration

Hi
I have buld a screnaio from IDOC->XI->DB2
In intergeration configuration when i create receiver determination the IDOC is not available in the list of the softwatr compoent where as it is in Intergeration repository.
Can you tell me wht can be done in this case to get the IDOC.
Regards

HI,
In Receiver Determination or Interface determination you need to specify the sender Service.
Is it Business Service or Business System.
When you will open the right side icon to fill-up the IDOC name in the Interface parameter then you will get check box stating that Software componenet specific or All. Select All and see if you are getting the IDOC name.
If you are using the Business Service then, double click on Business Service Name under Service Without Party.
It will open the Business Service check in Sender tab if the IDOC name as interface is added or not. Its missing out so you can't see the IDOC name while creating Integration scenario objects.
Similarly you can test for Business system also, but for it you can't add IDOC name entry in Sender tab. You need to approach above process.
Thanks
Swarup

Studio Creator - Debugging - 'Source not available' - how to import

Hello i'm in SC and want to figure out how to import the source for a class that is in error, i tried Fast Insert to no avail, thanks much!
Exception Handler
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: javax.faces.FacesException
javax.faces.FacesException: Can't instantiate class: 'insertupdatedelete.Page1'.. class insertupdatedelete.Page1 : javax.faces.FacesException: java.lang.ClassCastException
Possible Source of Error:
Class Name: com.sun.faces.application.ApplicationAssociate
File Name: ApplicationAssociate.java
Method Name: createAndMaybeStoreManagedBeans
Line Number: 308
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Stack Trace:
com.sun.faces.application.ApplicationAssociate.createAndMaybeStoreManagedBeans(ApplicationAssociate.java:308)
com.sun.faces.el.VariableResolverImpl.resolveVariable(VariableResolverImpl.java:78)
com.sun.faces.el.impl.NamedValue.evaluate(NamedValue.java:125)
com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:243)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:173)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:154)
com.sun.jsfcl.app.ViewHandlerImpl.setupPageBean(ViewHandlerImpl.java:397)
com.sun.jsfcl.app.ViewHandlerImpl.createView(ViewHandlerImpl.java:252)
com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:164)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)

Hi,
Are you working with "Performing Inserts, Updates, and Deletes" tutorial from
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/inserts_updates_deletes.html
MJ

Drop Ship across OUs - Operating Unit not available during Requisition Import

Hi,
I am trying to execute Drop Shipment across OUs on Vision Instance R12.1.1.
1)      Responsibility - Order Management Super User, Vision Operations (USA)
         Create SO in Vision Operations. In Others tab selected Warehouse as D1 ( Singapore Distribution Centre ). Line Item Source Type is External.
         Order Booked. Order line status is 'Awaiting Receipt'.
2)      Responsibility - Purchasing Super User.
         Request - Requisition Import.
         Issue - The Operating Unit LOV for Requisition Import is listing only 'Vision Operation'. The OU 'Singapore Distribution Centre' is not listed.
The responsibility Purchasing Super User has access to Org D1.
Please refer to attached screenshots for details.
Kindly help me with this process.

user12214874 wrote:
We are on Oracle EBS 11.5.10 and the requirement is that the US OU wants to drop ship a SO from our supplier in Japan(not part of Oracle installation) directly to our OU in Canada. (part of same Oracle installation). As per as per Oracle Order management users guide 11i; pg 1-7 drop ship across OU's and SOB's is possible. (Introduction chapter.) However when I read metalink note 225434.1, this is not possible. This looks to be a drawback with Oracle EBS since it is a very common requirement with most business going global these days. However, I may be wrong and the flow might very well be supported. If anybody has an idea, and provide some insights if this is supported in oracle or if there is a workaround available it would be appreciated.
*****Update******** I could create a Drop Ship So with Receiving Warehouse in another operating unit; I could also create the Internal Requistion and PO in the shipping OU. Also, the Payables Invoices to Selling OU was created. AR invoice against the Drop SO billed to Shipping OU was created. However I am still stuck as to the generation of Intercompany AR invoice. Also, I am wondering why is there a need for Intercompany AR invoice when the AR invoice is issued against the Drop SO?
Edited by: user12214874 on Feb 16, 2012 12:34 PMMy question is why would US OU want to drop ship to Canada OU...why can't canada OU directly raise a PO to a supplier in Japan??

Not availing CVD for Import material

Hi All,
My client has one requirement , they are importing few materials as a part of their Final goods and they do export , since Export order in Indian scenario does not subject to Excise Duty , hence they dont want to avail CVD for those type of Import Purchase order and also they do not want the duties to add in import material cost. How can we differentiate in SAP like this Import PO is for Export purpose ? how to not pass the CVD value to the imported material cost ? and finally for other import PO they take CVD normally.
Thanks in advance
Benny

hi,
- Is ur client running EOU( Export Oriented Unit) ?
If yes then they have duty exemption.... else they need to pay duty..... and offsetting entry should be on to Inventory(material Cost).....
To differenentiate PO material is for export purpose create separate Po type and also track the same material through manual batch management.... Export and Domestic batches..
regards,
sujit borse

Correct Lens Profile Not Available for Exported/Imported Image Files

Any help with this would be appreciated. I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
If anyone has any ideas about this and can get me past it, I would greatly appreciate it.
Thanks,
~Steve

Here's my workflow for this particular situation: After importing the original RAW files, I apply lens correction using the correct profile. I export to another application that creates a new (TIFF) file that comes back into LR. Even though I already applied the correction to the original files, I can see that there is a difference in distortion between the original files and the new TIFF.
If your other application is opening the Raw file directly, it will likely be disregarding either most, or all, Lightroom adjustments even if they are somehow communicated to it. It will come down to whatever independent Raw support is built into the other application.
The other application would still need to (a) "understand" about Adobe lens profiles etc, (b) "know" where to find the appropriate Adobe profile on disk, and (c) be equipped to do the specific and proprietary processing that they refer to. The same applies for all the other Adobe-proprietary processing instructions. The only software I am aware of which can do all this reliably, in partnership with LR, is Adobe Camera Raw plus Photoshop.
I've trained myself that whenever a new file is created in an application outside of LR (including PS), I always re-apply lens correction upon first returning to LR. If I'm interpreting the above responses correctly, I shouldn't need to re-apply lens correction if I applied it to the original files. But again, it's not my observation that this is the case.
If your particular workflow is failing to reflect the first application of lens corrections (as well as perhaps, other specific adjustments) - then what returns to LR will not have undergone those kinds of corrections yet.
I'm also hearing that I may need to download a lens profile for this lens for a TIFF file format. I've never needed to do that before, so perhaps I'll give that a shot.
As I understand it, Photomatix can also accept converted TIFFs or JPGs from LR - instead of Raw fles. I am skeptical that you will realise any "clear water" advantage from sending Raws rather than TIFF (or even, high quality JPG in many cases) from LR into Photomatix - assuming the LR conversion is already optimising the images for the required purpose. You would be doing that step in an interactive environment rather than blindly via a generic converter. Such intermediate bitmaps are in my experience perfectly good candidates for HDR processing, or for exposure fusion (which I prefer - though I don't use Photomatix in particular).
Any workflow which causes LR to in effect Export suitable bitmaps that incorporate all current adjustments, will embody lens corrections as part of that. By the way, the workflow into Photoshop HDR is similarly done by way of converted bitmaps - though in that case it is ACR rather than LR which achieves these converted bitmaps, and into memory rather than into separately saved files, but the outcome is effectively the same.
The only downside is the "cleanup" is to get rid of intermediate TIFFS or JPGs afterwards. I usually put the completed "merged" image at the top of a "stack" containing the component exposures, and collapse the stack down. But the (disposable) intermediates don't get imported to LR, and by setting these to occur in a subfolder or with a distinctive name suffix, they are easily found and deleted in due course.
RP

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Import button not active on Aperture import tool

I have a rMBP 15" (early 2013) model, and I was trying to import Aperture library (about 300GB) to Lightroom using import tool.
However, as I try to Import, Number of Image/video files and Disk space required remained undetermined and Import button has not been active for two hours.
What can I do? Just wait?

I too have exactly the same problem (the "Import" button on the Lightroom plug-in to import from Aperture library is not available).
The import button on the Adobe plug-in tool to import from my Aperture library is not available. It's greyed out.
I've tried the "repair permissions" option in Aperture ("Command+Options keys held while starting Aperture.app on my iMac). Aperture appears to fix the file permissions successfully (no error messages). However, the Adobe Lightroom import tool still shows the "Import" button greyed out.
I've tried the "repair database" option in Aperture ("Command+Options keys held while starting Aperture.app on my iMac). Aperture appears to fix the database successfully (no error messages). However, Adobe Lightroom import tool still fails to show an active "Import" button (still greyed out).
Finally, I've tried the "rebuild database" option in Aperture ("Command+Options keys held while starting Aperture.app on my iMac). Aperture appears to rebuild the database successfully (no error messages). However, Adobe Lightroom import tool still fails to show an active "Import" button (still greyed out)
The vital statistics for my aperture file are:
Version: Aperture Library 3.6
Filename: Aperture Library.aplibrary
Filesize: 136.08 GB
# Projects: 403
# Photos: 27,392
Permissions:
    myself     Read + Write
    staff         Read
    everyone Read
This is very frustrating. Did Adobe rush this import tool out too quickly without adequate testing?
Adobe, if you are listening please fix this issue with your Aperture import tool ASAP. Otherwise, I and a lot more users will be asking for our money back on the Creative Cloud plan we selected and are now paying for on a monthly basis!
Regards,
Tony

NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache

Hi,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.

Hi experts,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache : Object ID <ID of Operation Mapping>' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.
The ZBAPI is a wrapper for a standard BAPI with Request, Response and Exception as a structure.
Can anyone please highlight on the above issue also please consider the note above.
Regards,
Rohit.

IDoc not found in Objects list while Import from SAP

Hi All,
We could not find the custom IDoc in the Objects list, to import to Integration Repository.
Please let me know is there any setup required on R/3 side.
Thank you very much in advance.
Rama

Hi,
Are you able to see, standard/any idocs while importing ? If not-
In your SWCV, did you give SAP Logon credentials before importing the idocs.
Open SWCV in the repository, and choose option box "Import of RFC and idoc ....permitted" .
Then it will ask you to provide SAP system Id, Client , user id /password etc.. Then save and activate it. then try to import the idoc by going to Imported Objects section under SWCV and then Idoc and then import it.
If you are able to see standard one, then I thing you did not activate the custom Idoc types/message types and segment in R/3 system.. do this and check
Regards,
Moorthy

Imported Objects Option Not available Under SWCV ?

Hi Experts,
I need to Import Idoc from R/3 system.
But I am Unable to See Imported Objects Option Under SWCV.
How Can I Import Idoc in PI 7.0
if any screen shots are available
please share it
It helps me So much.
Thanks and Regards,
Ravi

Hi,
refer the below link.
http://****************/Tutorials/XI/FileToIDoc/Index.htm
Importing IDocs and RFCs
http://help.sap.com/saphelp_nwpi71/helpdata/EN/2b/a48f3c685bc358e10000000a11405a/content.htm
Regards
Srinivas

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

IDoc Receiver, Error in we02 - EDI: Partner profile inbound not available

Hi All,
I have a problem when creating a receiver IDoc from XI to R/3.
I have successfully tested the IDoc when populating the receiver information from the payload. However I want this information to be populated automatically based on the logical systems.
When I do this I get the following error in the IDoc in R/3:
EDI: Partner profile inbound not available
In the control record the sender information is all correct but in the recipient information the partner Number with type LS is populated, but port is not populated.
I have done the following steps.
     the sender is a Business Service so I have created a logical system directly adapter-specific identifiers in the sender service in the integration directory.
     In the receiver business system I have imported the logical system into the adapter-specific identifiers in the ID from that specified in the SLD.
     In the receiving R/3 system using SALE/BD54 I have created a logical system for the source system.
     In the receiving R/3 system using we20 I have created a partner profile of type LS with the same name as the source logical system.
     IN PI/XI system in transaction IDX1 Ive created a port (SAP<SID> where <SID> is the system ID of the receiving R/3 system) and the client of the R/3 system, and the RFC destination of that system (<SID>CLNT<clnt>, as specified in SM59).
     In the IDOC Adapter (receiver) I have entered the RFC destination and port matching those created above. All checkboxes are UN-checked eg. take sender from payload, take receiver from payload, Apply control record values from payload, etc. are all NOT checked.
I think that Ive done everything correctly, but I get the error in we02 in R/3: EDI: Partner profile inbound not available.
Any help will be greatly appreciated (and rewarded, obviously).
Thanks,
Matt.

HI Matt,
Can you please copy paste the exact error message....In your error message it will show you Exact partner Number / Logical System name and other parameters...just compared if you have all parameters set in your partner profile comparing to error message...
If you can giev screen shot of both..then probably would be easy to point out error.
Hope this will help.
Nilesh

Urgent: Linked object not available

We imported one role from one EP7 (DEV) into another EP7 (QAS).
At target QAS PCD, we see the role has a path:
pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/DEVCLIENT10/ROLE1.
1) We changed above path to:
pcd:portal_content/com.sap.portal.migrated/SAPComponentSystems/roles/QASCLIENT10/ROLE1;
2) We made sure EP7 QASCLIENT10 is connected to the backend well;
3) the backend QAS/10 indeed has the role called ROLE1.
But we still see on PCD, this imported role (ROLE1) has no any transaction. It shows a lot of "linked object not available".
I remember a place to activate it but anyway cannot figure out.
Please advise. Points guaranteed. Regards.

Greg,
I am quoting from SAP Help regarding the folder where the role uploaded objects should be stored.
<i>The folder in which the objects are stored after the upload is defined in service com.sap.portal.pcd.rolemigration. The path portal_content/com.sap.portal.migrated/SAPComponentSystems/ is entered as default value. You can also define a different path in the service.
The default folder can be found in the Portal Catalog under Portal Content -> Migrated Content -> SAPComponentSystems. You find further sub-folders that are created automatically with the upload below folder SAPComponentSystems. The objects uploaded from the backend systems are automatically sorted according to the following criteria in this folder: by the portal object type to which they are converted and by the logical system from which they are uploaded.</i>
You can check what path you have in your portal under the service com.sap.portal.pcd.rolemigration from System Admin -> System Config -> Service Config -> Applications. There you should find the location where your objects should be stored.
get the complete documentation <a href="http://help.sap.com/saphelp_nw04/helpdata/en/d1/95584035a0987ee10000000a1550b0/content.htm">Here</a>
Regards,
Shubhadip

Idoc not available in PI import objects

Similar Messages

Maybe you are looking for