Idoc not found in the receiving system

Hi Experts,
In the sending system idoc status is 03 (Data passed to port OK), but in the receiving system the idoc is not there. How to rectify this error?
Thanks & Regards,
Soumya.

Hi Soumya,
Check the RFC connections, becoz in the sending system once the IDOC is sent the status becomes 03 it does not check whether the IDOC has sent to the received system, if there are any errors before sending the IDOC it will not send and the status will be 01, so check the RFC connections at sending and receiving systems.......
Reward points if this helps............
Regards,
Ravi G

Similar Messages

Where will be the IDOC data saved when the receiving system is not ready

where will be the idoc data saved data when the receiving system is not ready

Hi karthik,
If the receiving system is not ready ,
the data is to be transferred and function modules to be invoked are temporarily stored in tables ARFCSSTATE and ARFCSDATA. once the receiving system is ready , the entried in these tables wiil be deleted.
regards,
Prasad kodi.

Missing document items in Sales Order in the receiving system

Hello.
We're doing passing of message type ORDERS (ORDERS05) from one system to another. Idocs were posted successfully but we can't find the document items in the receiving system if we view a particular sales order in VA03. Document items are present in the sending system.
I checked segment E1EDP01 (document items segment) for the inbound idocs and found all items attached to the sales order but we can't see them in VA03 display.
Appreciate help on how to proceed/check this issue.
Thanks. =)

If you have verified that the IDOC was complete in the receiving system, I would use WE19 to copy the IDOC in the receiving system (or copy to a development instance of that system) and run the process in debug....someone will have to watch the process, I think and see what is happening to the VBAP table during sales order build.

Code page of the receiver system could not be found".

Hi,
We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
What could be the reason for this error?
Because of this error all IDocs are getting stuck in XI.
Kindly help.
Thanks,
John

Hi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos

Outbound IDOC not received at the receiver system.

Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohith

Hi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Error while running February 2014 CU for SharePoint 2010 Foundation: The expected version of the product was not found on the system

I ran SP2 and SP2 for Language Pack successfully before.
Here is how it looks:
Product
Version
Status
Language Pack for SharePoint Foundation 2010 - Portuguese/Português (Brasil)
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Portuguese/Português (Brasil)
Installed
Microsoft Access Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Document Lifecycle Components Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2512800)
14.0.5138.5000
Installed
Microsoft Excel Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Excel Web App Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft InfoPath Form Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Proof (Portuguese (Brazil)) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Web Apps Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft OMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Project Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Shared Coms Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1046 Lang Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Portal Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Slide Library Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Visio Services Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Word Server Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft XMUI Portuguese (Brazil) Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft 2010 Server Language Pack (KB2687462) 64-Bit Edition
14.0.7015.1000
Installed
PerformancePoint Services in SharePoint 1046 Language Pack
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010
Installed
Microsoft SharePoint Foundation 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft® Search Server 2010 Express
Installed
Microsoft Office Server Proof (Arabic) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (English) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (French) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (German) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Russian) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Office Server Proof (Spanish) 2010
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Search Server 2010 English Language Pack
14.0.4763.1000
Installed
Hotfix for Microsoft Office Server (KB2475878)
14.0.5135.5000
Installed
Microsoft Search Server 2010 Express
14.0.4763.1000
Installed
Microsoft Shared Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Shared Coms English Language Pack
14.0.4763.1000
Installed
Microsoft SharePoint Foundation 2010 1033 Lang Pack
14.0.4763.1000
Installed
Hotfix for Microsoft SharePoint Foundation 2010 (KB2512804)
14.0.5138.5000
Installed
Microsoft SharePoint Foundation 2010 Core
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
Microsoft Web Analytics English Language Pack
14.0.4763.1000
Installed
Microsoft Web Analytics Web Front End Components
14.0.7015.1000
Installed
Service Pack 2 for Microsoft SharePoint 2010 (KB2687453) 64-Bit Edition
14.0.7015.1000
Installed
However when I try to run February CU or December CU I get the error:
The expected version of the product was not found on the system
it's possible that I messed up because
I think I installed a SharePoint Server Service Pack 2 in a SharePoint Foundation Farm.
these are the files I ran:
1 - SP2 pt-br
oserversp2010-kb2687453-fullfile-x64-pt-br
2 - SP2 for Language Pack pt-br:
oslpksp2010-kb2687462-fullfile-x64-pt-br
3 - ran configuration wizard (had na error message the first time and success in the second try)
4 - December CU or February CU:
Download SharePoint Foundation 2010 February 2014 CU
The expected version of the product was not found on the system
In the first step I think I should have installed
wsssp2010-kb2687464-fullfile-x64-pt-br
Now I try to runthis and I get:
The update is already installed on the system.
Hopefully this is a QA Environment but it would be a pain to start over.
Any suggestion?
Thanks
J.Clua

Hi,
Here are all errors logged:
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [81606c80-44b3-47c9-8c24-136bdeb07d64]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 81606c80-44b3-47c9-8c24-136bdeb07d64 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [4b6e8a49-765d-47a1-92f8-91f61d07bbed]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 4b6e8a49-765d-47a1-92f8-91f61d07bbed is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: Found a missing feature Id = [00bfea71-dbd7-4f72-b8cb-da7ac0440130]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:10:18 PM]: The feature with Id 00bfea71-dbd7-4f72-b8cb-da7ac0440130 is referenced in the database [WSS_Content_Sites_01], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: Found a missing feature Id = [5daabc0d-5714-4b95-9238-95d58704bc11], Name = [Blog Rating], Description = [This feature allows visitors
to rate blog posts], Install Location = [Blog Rating]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:16:17 PM]: The feature with Id 5daabc0d-5714-4b95-9238-95d58704bc11 is referenced in the database [WSS_Content_AcademiaTI], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: Found a missing feature Id = [af6d9aec-7c38-4dda-997f-cc1ddbb87c92]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:23:56 PM]: The feature with Id af6d9aec-7c38-4dda-997f-cc1ddbb87c92 is referenced in the database [WSS_Content_GlobalIT], but is not installed
on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [DEBUG] [3/11/2014 5:25:49 PM]: Retrieving site definition for language 1046...
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 21 web(s) using missing web template 75801 (lcid: 1046) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75801 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: Found 1 web(s) using missing web template 75802 (lcid: 1033) in ContentDatabase WSS_Content_EXP.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:50 PM]: The site definitions with Id 75802 is referenced in the database [WSS_Content_EXP], but is not installed on the current farm. The
missing site definition may cause upgrade to fail. Please install any solution which contains the site definition and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-2d1e-451a-b445-16bc346d7d8e]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-2d1e-451a-b445-16bc346d7d8e is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-5f69-4282-83ae-22808c0fbfd9]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: The feature with Id 75a0fea7-5f69-4282-83ae-22808c0fbfd9 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:53 PM]: Found a missing feature Id = [75a0fea7-6e3f-4d4a-8f78-245bda567b60]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-6e3f-4d4a-8f78-245bda567b60 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-040e-4abb-b94b-32f1e7572840]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-040e-4abb-b94b-32f1e7572840 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-b5a0-47d5-90e6-4b3205b02278 is referenced in the database [[OWSTIMER] [SPContentDatabaseSequence] [ERROR]
[3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-b5a0-47d5-90e6-4b3205b02278]], but is not installed on the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature
and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [f7b9c169-1418-41f3-888f-8ac436e17a0a]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id f7b9c169-1418-41f3-888f-8ac436e17a0a is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-f13a-4670-8b69-97e90d05f7c8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-f13a-4670-8b69-97e90d05f7c8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-377d-4b4f-b864-984379ed0f42]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-377d-4b4f-b864-984379ed0f42 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [75a0fea7-9d96-4f02-a800-a3512154efcd]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: The feature with Id 75a0fea7-9d96-4f02-a800-a3512154efcd is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:54 PM]: Found a missing feature Id = [90cd055f-f21f-42c5-b3fe-bb67173583d4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 90cd055f-f21f-42c5-b3fe-bb67173583d4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-0017-4993-85fe-c37971507bbc]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-0017-4993-85fe-c37971507bbc is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-fe65-41c3-a965-c5df83fb098b]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-fe65-41c3-a965-c5df83fb098b is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-7c51-4a75-92c1-cbaccb371622]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-7c51-4a75-92c1-cbaccb371622 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-b0ef-434e-90d6-ce997d970564]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-b0ef-434e-90d6-ce997d970564 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [75a0fea7-37d2-484b-b362-dcff1538e2a4]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: The feature with Id 75a0fea7-37d2-484b-b362-dcff1538e2a4 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:55 PM]: Found a missing feature Id = [49c44827-4747-4e89-999c-f199ad95cfa8]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 49c44827-4747-4e89-999c-f199ad95cfa8 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-42e8-4527-8313-f63c4c49a7e6]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-42e8-4527-8313-f63c4c49a7e6 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: Found a missing feature Id = [75a0fea7-a4ce-4a83-867d-f6be0ffdd867]
[OWSTIMER] [SPContentDatabaseSequence] [ERROR] [3/11/2014 5:25:56 PM]: The feature with Id 75a0fea7-a4ce-4a83-867d-f6be0ffdd867 is referenced in the database [WSS_Content_EXP], but is not installed on
the current farm. The missing feature may cause upgrade to fail. Please install any solution which contains the feature and restart upgrade if necessary.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.<nativehr>0x81020013</nativehr><nativestack></nativestack>
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Library.SPRequestInternalClass.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
 at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPSiteWssSequence] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Upgrade [SPSite Url=http://sjkqa41:7779] failed. Microsoft.SharePoint.Upgrade.SPSiteWssSequence has the ContinueOnFailiure bit set. Moving
on to the next object in sequence.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Inner Exception: Já existe um campo com este nome.
O nome especificado para este campo é igual ao de outro campo da lista. Escolha outro nome e tente novamente.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
 at Microsoft.SharePoint.Library.SPRequest.UpdateField(String bstrUrl, String bstrListName, String bstrXML)
 at Microsoft.SharePoint.SPField.UpdateCore(Boolean bToggleSealed)
 at Microsoft.SharePoint.SPFieldIndexCollection.IndexOneField(Object field, Boolean bIndexed)
 at Microsoft.SharePoint.SPFieldIndexCollection.Add(SPField field)
 at Microsoft.SharePoint.Upgrade.RestoreWorkflowAndDatasourceLibraryPermissions.Upgrade()
 at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]: Exception: Action 4.0.23.0 of Microsoft.SharePoint.Upgrade.SPSiteWssSequence failed.
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:32:40 PM]:
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
 at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
[OWSTIMER] [SPUpgradeSession] [ERROR] [3/11/2014 5:37:44 PM]: Upgrade Timer job is exiting due to exception: Microsoft.SharePoint.Upgrade.SPUpgradeException: Upgrade completed with errors.
Review the upgrade log file located in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\Upgrade-20140311-164603-307.log.
The number of errors and warnings is listed at the end of the upgrade log file.
 at Microsoft.SharePoint.Upgrade.SPUpgradeSession.CheckPoint()
 at Microsoft.SharePoint.Upgrade.SPUpgradeSession.LogEnd()
 at Microsoft.SharePoint.Administration.SPUpgradeJobDefinition.Execute(Guid targetInstanceId)
Despite all the erros, can I consider these farm updated in terms of SharePoint build?
Thanks
J.Clua

"Font not found on the system" for work logo font

I just started a new job and every single AI file I work with in illustrator is using VTypewriterRoyal - the company logo.
It automatically defaults to Myriad with the msg:
"Font not found on the system; missing font has been substituted."
I've spent way too much time changing it back from Myriad once in AI + scouring the web for answers. Haven't come up with any.
No one else at work seems to have this problem. I've tried installing and uninstalling the font.
Redownloading as OTF instead of TTF.
Nothing is working, so I really really hope someone can help me since I'm going to be considered slow if I keep having to take the time to change every ******* file I open.
Adobe support is seemingly overly complicated and this issue is making me crazy!!!
Someone please help. I'm on a brand new iMac 27" using 10.6.8....
Thanks.

check your spelling/spacing
I see
VTypewriter Royal
and
VTypewriterRoyal
They are different names...one has a space, the other does not
They must match exactly to work correctly

Build unsuccessfull product not found on the system or has been upgraded: daqmx 8.7

I get the following error when doing a build:
The build was unsuccessful.
The following product(s) are not found on the system or have been upgraded:
NI-DAQmx 8.7
I just upgraded from LabView 8.6 to 8.61.
Any ideas?

Hi Friend
You haven't mentioned whether it is occurring while building exe or installer. And I hope this occurring when building a installer. You just try this
Go to installer properties under category select "additional installers" and uncheck all items under the "national instruments installers to include" and then build. If its builds successfully there is no problem in your exe.
You can make separate installer of corresponding Run time engine and Device Drivers from the labview DVD.
This problem may happens when the installer failed to find the path of labview source distribution DVD where the Run time engine and device drivers are located.
Regards
Sam
[email protected]

The ovmcore-console libraries were not found on the system!!

Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?

Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example.

IDoc not visible in target R3 system

Hello
I am working on File-to-IDoc test scenario where I am sending CREMAS IDoc to R3 system (through IDoc receiver adapter). I performed all the necessary configuration which includes
RFC Dest of type R3 in both the systems
Creating ports in both the systems with port name similar to logical sys name of business system
Creating Partner profile for the above port with Inbound message type as CREMAS
When I am viewing the message in SXMB_MONI it shows successfully processed but Outbound status is still showing as "Message Scheduled on Outbound Processing". Also when I checked on the R3 side using we02, I could'nt find any IDoc over there. I checked in the trace where it states "Async processing completed OK".
Am I missing any configuration on R3 side which is not processing an IDoc?
Thanks in advance.
Regards
Rajeev

Hello
Thanks for the replies but i did configuration exactly as shown in the weblog. My RFC Destination is working fine.Also theres nothing in SM58. Also in SMQ2 "Nothing is selected" that means the message is processed successfully.
In SXMB_MONI it shows status as "Processed Successfully" but the Outbound Status is "Scheduled for Outbound processing".
In addition to this, I tried to test run (through SE37
) the FM "IDOC_INBOUND_ASYNCHRONOUS" in the receiving system with the control paramters of XI and that is creating the IDoc.
Regards
Rajeev

XML File not found for the Container model.cpx

I can run my application from JDeveloper without receiving the error. But when I deploy the application I get the following:
500 Internal Server Error
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container model.cpx at oracle.jbo.mom.DefinitionManager.loadProjectDefinition(DefinitionManager.java:751) at oracle.jbo.uicli.mom.JUMetaObjectManager.createPool(JUMetaObjectManager.java:457) at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:541) at oracle.jbo.html.struts11.BC4JRequestProcessor.initPageFromPath(BC4JRequestProcessor.java:233) at oracle.jbo.html.struts11.BC4JRequestProcessor.processMapping(BC4JRequestProcessor.java:123) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:234) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:721) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:803) at java.lang.Thread.run(Thread.java:479)
Any Ideas?

Hi,
please explicitly "make" the project. One reason for this problem could be that the model.cpx isn't created properly. Select the model project and compile the complete project before deploying it. Sometimes it helps to clear the "class" directory of the project on teh file system before re-compiling
Frank

Inbound IDoc not getting generated in XI System

Hi all,
I have created a scenario following the given weblog:
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
The first half of this scenario is working fine and the idoc data is getting posted into the the oracle table successfully.
The business process is successfully sending the acknowledgement IDOC 'ALEAUD' to the XI server using an HTTP Receiver Channel.
The problem is that no inbound IDOC can be seen in the XI system using tcode we05.
Next the xi system has to send the same IDoc to the R/3 system. But as no IDoc is getting generated in XI, nothing gets sent to R/3.
Can anyone suggest what could be the possible error.
Pls help.
Regards,
Neetu

Hi,
You will not see that IDOC in WE05 of the XI system. You can see that only in SXMB_MONI. XI system will not store any IDOC. When it enters XI it is a XML message and it will not post any IDOC that you can see in WE05.
If you need to send the IDOC back to R/3 system, you can use BPM and send back the IDOC to R/3. If you need few details from Oracle tables that is to be sent back to R/3 then get those values from Oracle tables and fill in the same IDOC and send it back to R/3.
Try this and let me know.
Thanks,
Prakash

New distribution groups results in Undeliverable "recipients address not found in recipients email system"

For some reason, new distribution groups I have created result in Undeliverable with the following body, Other distribution groups created in the past work fine. I have tested this outside our organization using my gmail and it gets returned to my gmail
account as well. Users that belong to the group are chosen obviously from the exchange provided users. I have tried using OWA, deleting autoentry, using the full address of the distribution group, I am truly at a loss. Any help is appreciated thanks in advance!
-Steve
Delivery has failed to these recipients or distribution lists:
[email protected]
The recipient's e-mail address was not found in the recipient's e-mail system. Microsoft Exchange will not try to redeliver this message for you. Please check the e-mail address and try resending this message, or provide the following diagnostic text to your
system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: akmail.mydomain.COM
[email protected]
#550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##
Original message headers:
Received: from akmail.mydomain.COM ([::1]) by
AKMAIL.mydomain.COM ([::1]) with mapi; Tue, 8 Jul 2014 12:43:48 -0400
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Steven Anderson <[email protected]>
To: "[email protected]" <[email protected]>
Date: Tue, 8 Jul 2014 12:43:47 -0400
Subject: test2
Thread-Topic: test2
Thread-Index: AQHPmsvJDOvU9vGSLkK1oPeNzIzatw==
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0

Thank you very much for your response Akshay, here is the results from the Get-DistributionGroup:
Name DisplayName GroupType P
techsupport techsupport Universal t
info info Universal
i
*CallOut *CallOut Universal _
AKwirelessorder AKwirelessorder Universal A
*AllEmployees *AllEmployees Universal, Secur... _
casstb casstb Universal c
albanytsg albanytsg Universal a
ak911kyalarms ak911kyalarms Universal a
Polk Polk Universal
P
Solatb Solatb Universal S
kytechs kytechs Universal k
AKDISTSolacom AKDISTSolacom Universal A
NEFla NEFla Universal N
RhodeIsland RhodeIsland Universal R
NewYork NewYork Universal N
bradsgroup bradsgroup Universal b
petesgroup petesgroup Universal p
mikesgroup mikesgroup Universal m
test2 test2 Universal, Secur... t
So it does list it, I have 2 domain controllers at the same site one is also hosting the exchange server (we are a small business). I created the distribution group directly on the exchange management console. I will force AD replication, but I have looked
at the structure using ADSIedit and it does list it in the users section which is sort of why I am at a loss on this. Thanks very much for your help, -Steve

'Item dependency "CURRENT_YEAR" not found in the EUL' error after 4i to 10g

Hi All,
I have successfully completed a Discoverer 4i to 10g (10.1.2.48.18) upgrade. There is only one EUL (EUL_US) and it has been upgraded to version 5.1.1. All the Workbooks are saved to the File System. However, during testing some of the Workbooks error when I try to open them in 10g - they still open successfully in 4i.
<Dialog Box> Item dependency "CURRENT_YEAR" not found in the EUL
<Dialog Box> Attempt to open Workbook failed
CURRENT_YEAR is a function of custom Package RESEARCH.UDEF which is valid both at a database level and at a Discoverer Admin 10g Register PL/SQL Functions level.
I tried deleting the Function "CURRENT_YEAR" from the 10g Admin Edition Tools -> Register PL/SQL Functions and then importing it again. I received the same Dependency error.
Now the really bizarre thing.....
The Workbook (2MG.DIS) has 2 Worksheets that both have Calculations that reference function CURRENT_YEAR. If I open the Workbook in Discoverer 4i, delete one Worksheet and save as 2MGb.DIS, then reopen the original and save the other Worksheet only as 2MGc.DIS. Both the individual Worksheets open in Discoverer 10g but the combined Workbook still gives the Dependency error. Weird huh?
Any ideas help appreciated as I'm pulling my hair out here (and I need what I've got leftl!).
Kind Regards,
Gary.

Hi all,
The answer was really quite simple but it was what I hadn't included in my post that would have made it impossible for you to help.
I hadn't mentioned that I was initially upgrading from 3i and it all seemed successful. I however was trying to open the Workbooks that had been created in Discoverer 3i directly in Discoverer 10g. That would explain the "bizarre" feature as I detailed in the post. As soon as I save the Workbook in 4i then I can open without issues in Discoverer 10g.
Thanks for viewing my post and for your response Gianluca.
Kind Regards,
Gary.

Idoc not found in the receiving system

Similar Messages

Maybe you are looking for