IDOC not generated in R/3
Hi,
we30- i have created the custom idoc
WE81 : for message type creation
we82- assigned it to custom message type
SE37: created a BAPI function module - no coding in the source i would like to just generate idoc in R/3.
WE57 : to assign a BAPI function module to IDOC
BD51 : and define characteristics for the above created FM.
WE42: for process code creation(give ur FM in Identifictaion field)
WE20 : Partner Profiles and give corersponding details along with the Process code.
from XI message sent successfully.
but in R/3 no idoc received or generated ... what might be the reason?
even if i use
call function 'INBOUND_IDOC_PROCESS'
tables
idoc_control = idoc_contrl
idoc_data = idoc_data
in created BAPI function module , no idoc generated.
pls share your experience in resolving the same...
tnx in advance..
balu
Hello,
Maintain distribution model using transaction BD64.
Create amodel and maintain sender , Receiver and message type in the model.
Then distribute it to receiver.
Regards
Arindam
Similar Messages
-
F110-idoc-not-generated-rffoedi1
hi expert,
I am running a payment program F110 and the IDOC is not getting genrated for
the payment program. In the payment log i see the infomation
IDOcs were generated for the following entries.... but when i chekc the idoc by we05 i can't find any idoc,
please advice on it.
thanskHi,
Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
Check the settings, it has to come. Reply back for more clarifications.
regards
srikanth. -
Material Master Change Pointer IDOCs not generated for Moving Avg Price GR
No IDOC is created or distributed when the moving average price
changes. Each time a Goods Receipt is performed, the material master
moving average price (MBEW-VERPR) changes but the change is not
distributed. No change pointer is created in the tables. Why?
We need to send the moving average price each time it changes. In our
case, each time a Inbound Delivery has been Post Goods Receipt this
value changes for that material + plant combination and the value
should be sent.
The field MBEW-VERPR is included in BD52 as a field relevant for change
pointers for the message type.
Please advise.Hello,
SAP will not generate change pointers (and no IDOCs) for Moving Average Price (MAP) changes. This is because MAP updates are not really Master Data changes and they are driven by transactions such as Goods Receipts, Revaluations etc. For these transactions, SAP will generate respective accouting documents for traceability.
Thanks,
Venu -
Hi,
I have a requirement to generate Idoc in F110.
For this i created one payment method with incoming payments and payment method classification and assigned program RFFOEDI1
I run F110 successfully but IDOC is not getting generated.
previously we created the same payment method for country spain and now i am creating this for Italy with same program and other details. Still IDOC is not getting generated.
Am i miss anything else FBZP configuratoin? Please let me know
Regards,
SankarHi,
I clicked on create payment medium but still error is not resolved.
Hi sunil,
Thanks for your valuable inputs.
As i told earlier i have house bank Bank of America(BOA) available for spain earlier with EDI partner number as 121.
For house bank Bank of America (BOA) for italy i added the new payment method R in EDI compatiable payment methods. System automatically generated House bank BOA as a EDI partner number.
Before payment method "R" added in EDI compatiable payment methods (in FI12 for italy house bank)for partner number 121 i have outbound parameters message type as DIRDEB and PAYEXT after i add payment method "R" for partner profile 121 outbound parameter message showing as PAYEXT and newly added inbound parameter EURTXT. For the EDI partner number BOA outbound parameters message type addes as DIRDEB and PAYEXT.
I am in a confusion that by adding payment method "R" in FI12 EDI compatible payment method system is going to create new EDI partner number BOA but due to that the earlier partner number 121 is getting effected. Due to this reason i am not able to go ahead further.
Regards,
Sankar -
IDOCs not generating with classic scenario
Hi,
We are with SRM 7 with Classic Scenario.
Issue : SRM Org. structure is replicated from ECC system through IDOCS. But, suddently, no IDOCs are getting generated in SRM after we run PFAL in ECC.
IDOC is getting created in ECC after we run PFAL but not creating in SRM.
Your inputs are appreciated.
Thanks
NagHi,
We have faced same issue.
You first check with tcode WE05 in both SRM & ECC. You will get to know which idocs present (transferred).
You can process unexecuted idocs using tcode BD87.
After processing idocs you must run distribution model.
This way we resolved our issue.
Regards, -
Message processed successfully in PI but IDOC not generated.
Hi,
Currenlty for some messages, Idocs are not getting genrated and
outbound queue in moni for this messages shows as IENGINE instead of
IDOC. Also the outbound flag doesn't have any status and there is no error information.
We are using message packaging but Before upgrading support pack from SP15 to SP21
we didn't face any issue regarding packaging.
Please suggest resolution for this if anyone have faced this kind of issue.
Thanks,
VKHi,
Please check what Markus said.
Also look for these settings in your scenario:
Check trace message in the SXMB_MONI ,
Check all queues are registered ? go to SXMB_ADM and check out this
Check about Receiver determination and Receiver Business Service is pointing to correct R/3 system. For this look into Adapter Specific Message Identifiers for the Reciever Business Service
If you are using BPM here ? If so check the BPM status
Let us know if this helps!
Divyesh Vasani -
Idoc not generated for Invoice in SRM 7.0 EHP1
Hi Folks
We are working in SRM 7.0 EHP1 (Standalone Scenario) and facing a issue with Invoice. Most of the times we are able to post Invoices to the FI system but some times the Invoices are stuck with status Awaiting Approval.
Can you guys help me on the same if this is a bug or is there are some issues which can be fixed ?
Thanks
UshirHi,
You can add the custom filed in invoice overview in the following manner:
1) Add required custom fields to the Standard Header structures u2018INCL_EEW_PD_HEADER_CSFu2019 and
INCL_EEW_PD_HEADER_CSF_INV
2) Create new entries in the view /SAPSRM/V_MDF_HC, for the Custom fields added to the standard structure
Mention overe there business object as Invoice
3) Enhance corresponding the webdyn pro component
Create new node in the respective context. Then create ui element in the view layout and bind this ui element with the created context node.
I am sure it will help you
Thanks,
Snehal -
When executing t.code VL03N then IDOC not getting generated
I have a issue in upgarde project as below;
Go to transaction VL03N
-Enter Outbound Delivery number
-Click on document flow
-Select Goods issue material document and click on Display Document
-Material document is displayed.
-Then go to: System -> Services for Object
-Click on display Relationship
-IDOC number must be displayed.
But Idoc not generated, here only material documets are displaying, pleass let me know what is the error.
Thanks in advance,
VishwanathHi,
IDOCs will not be triggered in VL03N. IDOCs will be triggered in either VL02N or VL01N based on the output type maintained (if you are triggering idoc based on Message control).
Regards
Vinod -
Not generating IDOC for payment Advice to Vendors
Hi,
IDOC was getting generated before one month but now SAP system has stopped generating IDOC for vendor Payment advice. This problem is with all the vendors.
After execution of t-c-ode F110, payment document is successfully created, but IDOC is not geenerated. There is no log about "IDOC not getting generated"
Checked Table REGUH, IDOC number is displayed as 0000000000000.
This was happening perfectly one month back.
There is no change in Vendor master data, IDOC number range is available.
There is no posting of IDOC in table DFKKTHP and checked Report REREMITADV for which there is no data.
Waiting for your valuable responses.
Regards
veleyudhamHi,
First check certain customization:-
(1) FBZP setup for payment method at country level. Whether IDOC generation program is assigned or not.
(2) Then check the variant of RFFOEDI1 in the printout tab of F110. Is the selection creteria OK?
(3) Check the partner profile in WE20 for the bank.
Then run the program RFFOEDI1 in SE38 for your payment run and check the output.
You can also get this program debugged from you ABAPer to have root cause analysis.
Regards,
Gaurav -
Which iDOC Type for Credit/Debit notes generated from SD Module ?
Hi,
We are implementing an EDI Solution for SD Invoices which would involve sending EDIFACT Messages generated out of mapping the SAP iDOC TYPE INVOIC02 to the EDIFACT fields.
We also have to send Credit and Debit Notes generated from SAP in the SD Module in the same path. We are currently planning on using INVOIC02 for doing this.
My Question: Is this the proper approach ? We don't want to use the Credit / Debit advises in FI-GL to post to Credits to Customer Account.
Is there any other iDOC Type or message type that we should be using for SD Credit/Debit Notes ?Hi Mahesh,
Thank you for your help.
In my client location data is posted non-sap to sap through SAP XI/PI.
so i need to tell the xi guy to which IDOC is used for this interface and technical names.
Can you help me. -
BBPCO IDoc not being generated
I'm using Extended Classic and appear to have a problem with the BBPCO IDOC.
I've completed all the required config steps (including process codes etc) and am happy that it's correct.
If I create a cart with a local product category, the Idoc is generated successfully.
If, however, I create a cart with a replicated material group, the Idoc is not generated.
The display only PO is successfully transferred to the backend but there are no commitments.
Has anyone got any ideas as to the reasons that could be behind this ?
Regards
KeithHi,
In the ECS scenario, thee duplicated PO generates directly the commitment : everything is handled by the backend.(no idoc)
If you create directly a R/3 PO (with same data as created from SRM) , is commitment created ?
Kind regards,
Yann -
CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC
Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
ParthaHi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga -
RE : IDOCS did not Generate after payment run
I have a unique issue. After APP run (ACH) all accounting entries & payment document created corectly. However idoc's for 3 vendors did not generated. There is no issue with configuration as this is not a new vendor and every month payments made off automatically. Vendor complained non receipt of payment after 10 days and I could not find the log for that day. Could anyone please give some hints what could have gone wrong if anyone is expereinced this issue. As I said earlier all config and set up are correct and infact after that one payment is made to that vendor.
Thanks
IvanHi,
Once APP run completed, Vendor open items will be cleared.
You have to create IDOC using WE19.
Run the Idoc using AL11
may be your problem will be solved
Thanks
Chandra -
In IDoc to file example if IDoc has not generated?what might be the problem
In IDoc to file example if IDoc has not generated? what might be the problem? where we can find it?
Hi Sudhakar,
We need to check in sm58 of R/3 system for any errors..and according to the error message we have to fix the problem.
It can fail with many reasons for example error in RFC destination connection etc.
Regards,
Prasanthi. -
Outbound Idocs are not generated for some material number MATNR
Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guysHi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
REPLACE '&' WITH GS-COUNT INTO GS-TEXT.
REPLACE '&' WITH GS-LINES INTO GS-TEXT.
CONDENSE GS-TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
EXPORTING
MATNR = <MATNR_WERKS>-MATNR
WERKS = <MATNR_WERKS>-WERKS
MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
GS-COMMIT = GS-COMMIT + 1.
IF GS-COMMIT >= 100.
GS-COMMIT = 0.
COMMIT WORK.
ENDIF
Maybe you are looking for
-
Aspect ratio out of wack on TV
When im watching movies ect on my TV from my ipod it seems abnout 50% of the videos are out of wack for exp, il be watching the video "One man band" it would only display "e man ba" on the title menu. The Same with caption when switching from dif sce
-
Dear Friends I want to know whether we can get customer wise profit using profit center accounting? Whether a customer can be made as a profit center? its too urgent as one of the client has asked for it. kindly guide thanks in advance vaibhav
-
Graphite 1500 Phone / Answer Machine issue
Hi, Don't know if anyone can help with this please....we had issues with our original graphite machine as it wouldn't record. Having gone through BT support etc they advised us to take it back to the shop and exchange it. We did this, but now the rep
-
I am having a hard time to backup (or synch if you will) all files from Ipod to a new computer using ONLY I-tunes. Does anyone have a step-by-step solution or a workaround using a freeware? thanks
-
AppStore: Update all doesn't work.
I can't update all Apps the same time. I just can update 1 each time. There is no Log-In when I push the Update all button.