IDoc not getting passed to XI - ECC to XI to File

Hi Friends,
I am facing one problem. There is IDoc to File Scenario i.e. ECC-XI-File. In ECC, it is showing that IDoc has been sent successfully to the port while I can not see the IDoc in XI. What could be the reason?
Br,
Nilz

Hi,
if your IDOC structure has changed, then in XI in IDX2 transaction, update the metadata of your IDOC and then re-trigger your IDOC..............
have you configured partner profile WE20 transaction for outbound parameter for your IDOC for sending data to XI port..........
check in SM58 if there is any entry there.........if there is any entry, then select it and click on process button.........
Regards,
Rajeev Gupta

Similar Messages

Value in a EIT segment(From Update Page)not getting passed to the Next Page

Hi
We have a extended CO to populate an EIT field as per the calculation in CO, on a custom button click.
Calculated value is stored/displayed in the EIT Update Page.
On clicking Apply, value is not getting passed to the next page, EIT Main Page and further to store the calcualted value in the EIT table.
Anyone have faced such problem ?
Thanks
Arun

Hi Gaurav
Facing problems with put/getSessionValue.
For the first time in a session, we do not have any issues.
For next transaction in the same session,
Variable has the same value even if we go for a next EIT transaction, and replaces this value for the field, without pressing the custom button.
Thanks
Arun

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
 WORKITEMID_IMP = OBJECT-KEY-ITEMID.
 SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
 SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
 IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
 WORKITEMID_IMP = WI_CHCKWI.
 ENDIF.
 CALL FUNCTION 'CATS_WF_APPROVAL'
 EXPORTING
 WORKITEMID_IMP = WORKITEMID_IMP
 TABLES
 CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Filters not getting passed in MDX query while using SAP BW with OBIEE

Hello,
I've been working on OBIEE with SAP BW as back-end. I've created some reports & those are working fine when there is less amount of data. But when I try to run a report with 3 dimensions & 1 fact it throws an error saying "No more storage space available for extending an internal table". When I checked MDX query, I found that the filters that I had applied to request & also selected from prompts are not getting passed in that query. So, I tried running a simple request using a simple filter in Answers. Although this request returns results but I can't see filter conditions in query. MDX query always show crossjoin but I can't see filter conditions anywhere.
Is it the normal OBIEE behaviour OR am I doing something wrong in there? Can you please help me out with this?
Thanks,
Rocky

Hello Sainath,
We tried those things. But it is still giving same error.
State: HY00. Code: 10058. [NQODBC][SQL_STATE:HY000][nQSError: 10058] A general error has occurred. XML/A error returned from the server: Fault code: "XMLAnalysisError.0X80000005". Fault string: "The XML for Analysis provider encountered an error: MDX result contains too many cells (more than 1 million)". (HY000)
The problem here, I think, is the filter parameters are not getting passed in the MDX query. Any idea why would that happen? Is there any setting to do so?
Thanks in advance for help.
Regards,
Rocky

I have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page?? please help :-(

i have updated my iphone 5s to iOS8 but it has my old icloud account, how can i change the icloud email address as i can not get passed this page??
I do not know the log in details and no longer have that icloud email address !!
please help :-(

That's Activation Lock. You will need to remember the Apple ID and password you used to set up the phone.
If you can't remember them, you can go to iforgot.apple.com to try to recover the information.
If you are the original owner of the phone & have proof of purchase, you can try calling Apple to see if they can assist also.
~Lyssa

Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

IDOC not getting genrated

Hi Experts,
Need your help.
In idoc creation, I have changed material description, its generating master idoc but communication idoc not getting generated.
Please suggest me the solution,
Regards,
Rachna

Hi,
Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
Check the settings, it has to come. Reply back for more clarifications.
regards
srikanth.

HT201407 Can not get passed the screen where it asks me for Apple ID and password

Dear Apple,
My father and I recently switched our phones because he needed a better phone for business. I now restored the phone and i can not get passed the screen where i need his Apple ID and Passcode. The problem with this is that it would be easy if i knew the Apple ID and password, but my father does not remember any sort of info about his Apple ID or password! Please help me ASAP! Thank you so much for taking the time out of your day for me.
Sincerely, Paresh
<Personal Information Removed by Host>

Do not post your personal information on a public thread - not a good idea.
If your father does not remember his Apple ID that he set up iCloud and Find My iPhone with, have him go to: FORGOT APPLE ID to retrieve the Apple ID.
Then follow the prompts to reset the password.
If he doesn't remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Once you know the Apple ID and the password, you will be able to proceed.
Cheers,
GB

HT4623 Can not get pass Term and Conditions page after upgrade?

Can not get pass the Terms and Conditions page after upgrade?

Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

Article IDoc not getting processed in PI for particle article type

Hello All,
I have an strange behaviour in my system.
i.e 1, we are creating an article IDOC by using BD10 for particulat article type.
2, IDOC created succesfully , then
3, Process the IDOC in BD87 to push the IDOC to PI system .
4, But i could not see the message in PI that too only for one article type.
I'm wondering why this is not getting processed only for one article type and not for others.
we also checked the basic filter for the message type in dist model and even i could not see any condition in PI also,
Is there any thing else i should check? can you please help us on this.
Regards , Sethu.

Hi,
Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
IDoc 0000000000181226 was saved but cannot or should not be sent
Regards,
Priyanka

I used the wrong password for my belkin wifi. Now that I know the correct password I can not get pass the unable to connect or join message. I have turned off all the options such as wifi and join and also put my touch to sleep.. but nothing seems to work

I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message. I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page. Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password. I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that? Thanks for any input anyone has.

Yes. Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
B-rock

Inbound IDoc not getting generated in XI System

Hi all,
I have created a scenario following the given weblog:
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
The first half of this scenario is working fine and the idoc data is getting posted into the the oracle table successfully.
The business process is successfully sending the acknowledgement IDOC 'ALEAUD' to the XI server using an HTTP Receiver Channel.
The problem is that no inbound IDOC can be seen in the XI system using tcode we05.
Next the xi system has to send the same IDoc to the R/3 system. But as no IDoc is getting generated in XI, nothing gets sent to R/3.
Can anyone suggest what could be the possible error.
Pls help.
Regards,
Neetu

Hi,
You will not see that IDOC in WE05 of the XI system. You can see that only in SXMB_MONI. XI system will not store any IDOC. When it enters XI it is a XML message and it will not post any IDOC that you can see in WE05.
If you need to send the IDOC back to R/3 system, you can use BPM and send back the IDOC to R/3. If you need few details from Oracle tables that is to be sent back to R/3 then get those values from Oracle tables and fill in the same IDOC and send it back to R/3.
Try this and let me know.
Thanks,
Prakash

IDOC Not getting Posted in PI from CRM

HI All,
I had Configured,
in CRM side : SM59,WE21,BD54,WE20
in XI side: datatypes,MT,MI, Maaping not yet done, IDX1,SM59
Idoc is not getting displayed in XI system.
I had a small Question, Do we need to Configure all the setting in XI for Getting IDOC from CRM.
Thanks in Advance,
Sriram.

Hi Jag,
Thanks for the reply.
1.CRM: go to Tcode-WE81 and check message type CRMXIF_PARTNER_SAVE created?
Yes exists
2.CRM: Execute Tcode-WE82, Check message type CRMXIF_PARTNER_SAVE has relevant IDOC type and version.
yes both message type and basic type exists
3.XI: Did you import right Message type and IDOC type in to IR in XI?(name will be like Message_type.IDOC type)
yes imported CRMXIF_PARTNER_SAVE.CRMXIF_PARTNER_SAVE01 in IR.
When i see in Table EDMSG in XI system i am not finding the value CRMXIF_PARTNER_SAVE, but this value Exists in CRM system
in XI i m not finding the message type in WE81 and WE82.
Thanks in Advance,
Sriram

IDOC not getting posted into BPM

Hello Friends,
I have a scenario where i am using Async/sync bridge in BPM to convert an IDOC message into webservices.
I have configured the BPM correctly without any sematic errors.
Whenever I post an IDOC, i get an error message saying - "Party and service not defined"
Do I need to "START" a BPM from somewhere??
Im getting stuck at the starting itself
Please help me friends!
Regards,
Lakshmi

Hi,
in ID, in your R/3 business system, from menu go to Adapter specific identifiers......then a popup window will come.......then in that window, your logical system for IDOC may be blank.......click on Compare SLD button at below, then your logical system field should be filled with the logical system you have defined for your r/3 system in your SLD.
Then again send your IDOC from r/3 to XI.
Regards,
Rajeev Gupta

CRMXIF_ORDER_SAVE IDOC not getting generated for BUS_TRANS_MSG BDOC

Hello Experts,
In our project, we have a requirement to send custom fields in the BUS_TRANS_MSG to external system through XIF. The model of BDOC BUS_TRANS_MSG triggering IDOC CRMXIF_ORDER_SAVE_M02 perfectly worked in the development system. We wanted to try the custom field extension in the Sandbox. So as per OSS note 916093, we have extended E101_CRMXIF_CUSTOMER_H segments with custom fields and tried generating the interfaces in BDFG transaction. While generation with IDOC CRMXIF_ORDER_SAVE_M we got an error message "Incompatible change to complex data type
type E101CRMXIF_ISU_PRA1_X". So went about creating a custom IDOC ZZ_CRMXIF_ORDER_SAVE_M02 for message CRMXIF_ORDER_SAVE. Even for this config, the IDOC is not getting generated for the BDOCs. Lastly, configured the IDOC ZZ_CRMXIF_ORDER_SAVE_M02 to a custom function module ZZ_BDFG_IDOC_TEST_FM. The FM got generated and activated, even then the IDOC is not generated for the BDOC.
SMOEAC config in Sandbox looks the same as the Development system. We do not the reason why IDOC is not getting generated and also the reason for error in BDFG while generating the interfaces after adding custom fields to CUSTOMER_H segment.
Any help would be appreciated.
Thanks,
Partha

Hi Partha,
Kindly check the following thread.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/406efa7e-388a-2910-f9b8-81913b0ca57f?QuickLink=index&overridelayout=true
XIF adapter
Hope it answers your Query
Regards,
Srikanth.Naga

IDoc not getting passed to XI - ECC to XI to File

Similar Messages

Maybe you are looking for