Idoc not visible in Business system

Hello Experts,
I am trying to configure a scenario where in I am trying to use the IDoc ZCNOSE_PRICAT.PRICAT02.ZPRICAT1.
However, this IDoc is not reflected in the business system in which I am using.
I have already released the extension from the backend SAP system.
Can you please suggest what I am missing such that the extension is visible in the Business system.

Hi,
You imported the idoc structure into the ESR, under a specific SWCV.
Make sure that SWCV is linked to your Business System in the SLD.
Kind regards,
Dimitri

Similar Messages

Service interface not listed in business system in ID.

Hi Experts,
In my QA system service interfaces are not listed in business system in ID, i have added product and SWCV in SLD and i am still unable to see the service interfaces of SWCV that i have added. i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Please suggest how to resolve this issue.

Hi Venu,
i have done SLD and CPA cache refresh, restarted the QA system but still unable to resolve the issue.
Try if "Compare from SLD" works? This can be accessed by going to ID -> double-click business system -> communication component -> adapter specific identifiers
Regards,
Mark

IDoc not visible in target R3 system

Hello
I am working on File-to-IDoc test scenario where I am sending CREMAS IDoc to R3 system (through IDoc receiver adapter). I performed all the necessary configuration which includes
RFC Dest of type R3 in both the systems
Creating ports in both the systems with port name similar to logical sys name of business system
Creating Partner profile for the above port with Inbound message type as CREMAS
When I am viewing the message in SXMB_MONI it shows successfully processed but Outbound status is still showing as "Message Scheduled on Outbound Processing". Also when I checked on the R3 side using we02, I could'nt find any IDoc over there. I checked in the trace where it states "Async processing completed OK".
Am I missing any configuration on R3 side which is not processing an IDoc?
Thanks in advance.
Regards
Rajeev

Hello
Thanks for the replies but i did configuration exactly as shown in the weblog. My RFC Destination is working fine.Also theres nothing in SM58. Also in SMQ2 "Nothing is selected" that means the message is processed successfully.
In SXMB_MONI it shows status as "Processed Successfully" but the Outbound Status is "Scheduled for Outbound processing".
In addition to this, I tried to test run (through SE37
) the FM "IDOC_INBOUND_ASYNCHRONOUS" in the receiving system with the control paramters of XI and that is creating the IDoc.
Regards
Rajeev

IDOC not visible in IR but metadata successfully imported

Hi,
I have this wiered issue.
I want to import IDOC WPUSKR01 (cashier productivity) from BI.
But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
But I can manually import the metadata from BI in idx2.
Now how to import this in IR?
I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
Regards,
Anirudh Vyas.

Hi,
In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
I have checked all the segments in we31, they are all released.
But it gives error:
Error: IDoc type WPUKSR01 contains errors (unable to read segments)
Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
But the same thing is failing in BI. I have SAPALL permissions in all the systems.
Can I use Idoc imported from R/3 in scenario for BI?
regards,
Anirudh.

Cannot see/find the standard IDOC/BAPI in imported Business system

Dear Friends ,
We have installed the PI 7.1 and registered the CRM 7.0 via RZ70 in SLD of PI as techincal system and created the business system as well . Then i have mapped to the corresponding product and SWCV.
But when i import the business system in ID , i couldn't find the standard(pre-delivered) sender and receiver interfaces ( like IDOC etc., ) .
Please provide your valuable inputs .

Rangarajan,
Have you added the correct SWCV to the BS and TS?
i think you have not linked the TS and the Product correctly .
Create a Product->for this product create a SWCV->go to technical system reference the
created product there->Go to BS and check select the TS created earlier.
after doing above step , refresh sld cache and check again.
Please refer this wiki post :
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
Regards,
Srinivas

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

Integration directory : select IDOC interface for WAS business system

Hi,
While adding a receiver determination for an WAS business system, I do not get any IDOC based message interface from the design repository proposed for my business system in the popup dialog.
The only interfaces that appear are for the non SAP standard SWCV that we added to the business system. But no interface for the APPL 5.0 SWCV ( or BASIS 7.0 ) appears.
In the SLD this component is correctly listed for that WAS .
If I remove all the default search criteria , eventually, the in terface appears but after selecting it I get a message saying :
"Message Interface does not exist in any software components installed on this business system "
Since everything looks ok in the SLD I'm puzzled. How does this look on other systems ?
Any ideas
( The business system was updated from APPL 4.70 / BASIS 6.40 to APPL 5.0 / BASIS 7.00 some time ago but I don't know how it look before the upgrade of the business system )
rgds
Dirk

Hi Bavesh,
Yes, It's correctly listed. I did not manually link these components to the technical/business system. This happened automatically by the SLD data collector service. I also cleared the SLD cache several times,
rgds
Dirk

Idoc not appearing in Xi system

Hi experts,
I have developed a idoc to file scnario but the idoc trgerred in the ECC system i snot comming to XI. I have done all the setting IDX1 and IDX2 and partner profile settings in ECC. the idoc status is 03 in ECC which says the idoc is sent to port successfully, but it is not appearing in SXMB_MONI in XI. It used to work earlier. Is there any batch job or peogram does this transfer. what do i check?/
thanks
sankar

Hi,
Add the Logical System of SAP R/3 in Integration Directory as shown in the Blog and check Now
The specified item was not found.
And also check these Disscussions
No service for system in Integration Directory
No Service for System XYZ,Client 300 in Integartion Directory
Regards
Seshagiri
Edited by: N V Seshagiri on Aug 7, 2008 8:16 AM

IDOC not visible to import to XI, but on R/3 created and released

Hi guys!
I have problem with import IDOC into my repository objects. It is not visible to import, but on the r/3 side it is created and released.. Other IDOCs are visible, but not the one I need.. The IDOC I need is custom, created few moments ago..
What could be wrong?
Thanx for answer!
Olian

Olian,
you need to release our IDOC to be visiable for XI.
goto we60 see if you can find the our ZIDOC if you dont then goto WE30 then type our IDOC then goto Edit tab on top and select set release.
if you have done this then do this
T/C Code: WE82
pass the IDOC type , message type and sap version then save.
now our output types andIDOC assigments to IDOC types are done
Regards
Sreeram.G.Reddy
Message was edited by:
Sreeram Reddy

Edge animation does not visible on Business Catalist

HI,
I made a simple Edge animation, published as .oam and placed in Muse, when previewing in browser form Muse, the animation is visible, when publishing to Business catalist, it is invisible and Button with ! Report Abuse apears where the animation should be. What is the reason, what am I doing wrong?

Home
This is the url, currently still in progress stage, however it would be nice to be able to see the animations in this stage all ready if not, wont be able to use them at all.
Animations is not visible on any of my browsers- mozilla, safari, chrome
I'm not an expert in code - reason for using muse and edge
Animation should be on page SPECIFICATION

Idoc not posted in sap system

Hi All,
i have configured the file to idoc and idoc to idoc scenario.
in sxmb_moni,the inbound idoc is fetching one port and the out bound idoc is fetching the default port,how can i config the port that is idoc comming from sap system.
in interface mapping i am not able to assign the operational mapping that is created in IR, it is fetch the default name space of the idoc ,which is not to our operational mapping created in IR.
Regards,
reddy

in sxmb_moni,the inbound idoc is fetching one port and the out bound idoc is fetching the default port,how can i config the
port that is idoc comming from sap system.
In Message Mapping enable the EDI_DC40 segment and then give value to the SNDPOR/ RCVPOR ....once done in receiver IDOC channel check the Apply Control Record from Payload....Michal has written a blog on EDI_DC40 segment check it once.
in interface mapping i am not able to assign the operational mapping that is created in IR, it is fetch the default name space
of the idoc ,which is not to our operational mapping created in IR.
This behavior is correct....IDOC will refer to its own namespace and not to the one created in IR.....and this should not cause any issue while assigning mapping in Interface Determination....if it is causing an error then you have not selected the objects properly.
Regards,
Abhishek.

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

Sales order is not visible in the system

Dear Sirs
I have gone through threads of sales but could not be able to find help regarding the below problem
I am running the SD_SALESDOCUMENT_CREATE to create sales documents.
After execution I get the following result:
SALES_HEADER_IN has been processed successfully
SALES_ITEM_IN has been processed successfully
SALES_CONDITIONS_IN has been processed successfully
Credit M.-Prod. THE 8000000633 has been saved
in export parameter SALESDOCUMENT_EX I get a value (for example 8000000633) which is a correct sales document number. But when I use transaction VA02 or VA03 and give the above number I get the message "Sales document is not available".
If I try to crete a sales documnet using VA01 the document is created successfully and takes the next sales document number (for exemple 8000000634)
Kindly help asap

Hi Kapil,
Just commit the data base .Generally when we create any data using fm or bapi it wont commit database. Take the fm and sequentially use another fm if you did this from se37. If you did this from report just commit data base. It will commit data base and create a record. Please close the thread if it is answered.
Regards,
Madhu.

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

OAM 10g attribute is not visible in object class in Identity System console

Hi All,
This is about OAM 10g environment with OID used as user/config/policy store. There are one custom user object class and custom attributes defined in Identity System console already. Now there is a requirement to add another custom attribute to that already existing custom user object class.
I have created the attribute in schema through ldap command and I am able to see it in LDAP browser as well. However even after restarting OAM identity server and webpass services, the attribute is not visible in Identity System console -> Common Configuration -> Objectclasses -> Custom object class.
Appreciate any help. Please treat this as urgent.
Thanks
Mahendra.

The solution is to add the attributes in OVD schema as OVD is the user store.

Idoc not visible in Business system

Similar Messages

Maybe you are looking for