IDOC not visible to import to XI, but on R/3 created and released

Hi guys!
I have problem with import IDOC into my repository objects. It is not visible to import, but on the r/3 side it is created and released.. Other IDOCs are visible, but not the one I need.. The IDOC I need is custom, created few moments ago..
What could be wrong?
Thanx for answer!
Olian

Olian,
you need to release our IDOC to be visiable for XI.
goto we60 see if you can find the our ZIDOC if you dont then goto WE30 then type our IDOC then goto Edit tab on top and select set release.
if you have done this then do this
T/C Code: WE82
pass the IDOC type , message type and sap version then save.
now our output types andIDOC assigments to IDOC types are done
Regards
Sreeram.G.Reddy
Message was edited by:
        Sreeram Reddy

Similar Messages

  • IDOC not visible in IR but metadata successfully imported

    Hi,
    I have this wiered issue.
    I want to import IDOC WPUSKR01 (cashier productivity) from BI.
    But when I connect to BI system from IR to import Idoc structure, this IDOC is not visible.
    But I can manually import the metadata from BI in idx2.
    Now how to import this in IR?
    I have imported other Idocs (like WPUBON) before and did the scenario successfully for BI.
    Regards,
    Anirudh Vyas.

    Hi,
    In BI Tcode we82 I have manually added the entries for WPUKSR01. Now Idoc is visible when importing in IR.
    I have checked all the segments in we31, they are all released.
    But it gives error:
    Error: IDoc type WPUKSR01 contains errors (unable to read segments)
    Then, I checked in R/3, there also WPUKSR01 was not there in we82. I manually added there and I was successfully able to import it in IR.
    But the same thing is failing in BI. I have SAPALL permissions in all the systems.
    Can I use Idoc imported from R/3 in scenario for BI?
    regards,
    Anirudh.

  • TS2988 I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

    I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

    Try Here  >   https://discussions.apple.com/docs/DOC-3792

  • I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

    I purchased a ringtone and it is not visible in my cloud, etc, but when I try to purchase it again, it says that I have already purchased it. Where can I recover my ringtone?

    Try Here  >   https://discussions.apple.com/docs/DOC-3792

  • Trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images

    trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images say "preview cannot be seen" and some don't. And when I try to import and I hit "new photos" it's all the photos on my card. My brain is about to explode.

    It said something similar where the thumbnails were supposed to be.
    Just got the newest edition of LR, 4.4
    4.4 is not the newest edition of LR
    We don't want to know that it said "something similar", we want to know the exact wording. In fact, you ought to state the exact problem you are having, in detail, instead of saying you are having the same problem.

  • I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

    I purchased creative lightroom presets. I see the zip file in my download file and I try to import to LR but it just keeps creating a bundle never giving me the option to import (greyed out). What am I doing wrong?

    Try unzipping the file first. I have no idea regarding your level of technical expertise so advanced apologies if this is really basic. A ZIP file is a compressed file containing one of more files within it. To access the files you will need to expand it. If you double-click on it first, it should open up for you. If it does not automatically expand, you can select the files and copy them to a new folder. The copy will unload them into an uncompressed form. Once they have been uncompressed, you should be able to import them.
    If the import is still giving you problems, go to your Preferences, click on the Presets tab and click the Show Presets Folder button. You can then copy your purchased presets into the folder shown. You will want to copy them to the User Presets subfolder.

  • HT2534 The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

    The none option is not showing for indian itune store. So cant i create and itune account for just downloadning free app anymore without credit card information?

    HI..
    The None option is not available in all countries  
    iTunes Store: Which types of items can I buy in my country?

  • Partition index are not visible after import in 11g

    Hi,
    target database : oracle version : 11.2.0.1
    Source database : 10.2.0.4
    i have a table in 10.2.0.4 and need to transfer to 11.2.0.1
    SQL> SELECT i.index_name, i.partition_name
    FROM dba_ind_partitions i, dba_tab_partitions t
    WHERE i.partition_name = t.partition_name
    AND t.table_name = 'BKPG';
      2    3    4
    INDEX_NAME                     PARTITION_NAME
    I_BKPG_ACT_REC_IDX             BKPG_2010_JUN_DEC
    I_BKPG_ACCT_ACTD_REC_IDX       BKPG_2010_JUN_DEC
    I_BKPG_ACCT_REC_ACT_IDX        BKPG_2010_JUN_DEC
    I_BKPG_STLM_REC_ACC_IDX        BKPG_2010_JUN_DEC
    I_BKPG_STLM_ACC_REC_IDX        BKPG_2010_JUN_DEC
    I_BKPG_ORD_IDX                 BKPG_2010_JUN_DEC
    I_BKPG_TDATE_REC_BS_IDX        BKPG_2010_JUN_DEC
    I_BKPG_CUSIP                   BKPG_2010_JUN_DEC
    I_BKPG_ACCT_TRDDTE_REC_IDX     BKPG_2010_JAN_JUN
    I_BKPG_ACCT_ACTD_REC_IDX       BKPG_2010_JAN_JUN
    I_BKPG_TDATE_REC_BS_IDX        BKPG_2010_JAN_JUN
    INDEX_NAME                     PARTITION_NAME
    I_BKPG_ACCT_REC_ACT_IDX        BKPG_2010_JAN_JUN
    I_BKPG_ACT_REC_IDX             BKPG_2010_JAN_JUN
    I_BKPG_ORD_IDX                 BKPG_2010_JAN_JUN
    I_BKPG_STLM_ACC_REC_IDX        BKPG_2010_JAN_JUN
    I_BKPG_ACCT_TRDDTE_REC_IDX     BKPG_2010_JUN_DEC
    I_BKPG_CUSIP                   BKPG_2010_JAN_JUN
    I_BKPG_STLM_REC_ACC_IDX        BKPG_2010_JAN_JUN
    18 rows selected.i took the export of this table and during import i used follwing parameters
    impdp directory=TEST transform=segment_attributes:n REMAP_SCHEMA=dev:prakash1 dumpfile=BKPG1.dmp -> as to avoid the storage clause error i used transform=segment_attributes:n
    import went sucessfull but if i query below sql zero rows returns
    SQL> SELECT i.index_name, i.partition_name
    FROM dba_ind_partitions i, dba_tab_partitions t
    WHERE i.partition_name = t.partition_name
    AND t.table_name = 'BKPG';
      2    3    4
    no rows selectedwhy i am not able to query partitions index , please advice
    Thanks

    Thanks for the update,
    i am unbale to see these index partitions in the views dba_ind_partitions but i am able to see in dba_objects;
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    OBJECT_NAME                              OBJECT_TYPE
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_ACCT_TRDDTE_REC_IDX               INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    OBJECT_NAME                              OBJECT_TYPE
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    I_BKPG_CUSIP                             INDEX PARTITION
    .why i am unable to see in dba_ind_partitions view
    Thanks

  • Some workflow Mail items not visible in SCOT in QA but there in Development

    Hi,
    In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
    Regards,
    Arcahna

    Hi,
    In our development system and QA system the SCOT is enabled to test the workflow for credit approval. The settings as far as I can see is same in both the systems except in address types maintained in QA is specific and it is * in development. In QA while the task for mails is raised, the items with recipient type Organisation object are not visible in SCOT overview of orders but in development all the items are visible. In development, the mail is also activated based on the user id but this is not working in QA system where the only item that is sending the mail is the one with recipient type Email. Can you plaesea advice what is wrong in teh configuration?
    Regards,
    Arcahna

  • Flash not visible after importing to a new app

    hi all,
    I copied a piece of flash from a previous application (that
    works perfectly) into a jsp in a new app. I imported the file,
    changed the relevant file paths and it doesn't work at all. Also,
    for some reason there's a problem with the embed tag at the end
    (i.e. green squiggle).
    the following is the code:
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
    width="300" height="300">
    <param name="_cx" value="7938">
    <param name="_cy" value="7938">
    <param name="FlashVars" value="-1">
    <param name="Movie" value="../Flash/Trademarks2.swf">
    <param name="Src" value="../Flash/Trademarks2.swf">
    <param name="WMode" value="Window">
    <param name="Play" value="-1">
    <param name="Loop" value="-1">
    <param name="Quality" value="High">
    <param name="SAlign" value>
    <param name="Menu" value="-1">
    <param name="Base" value>
    <param name="AllowScriptAccess" value="always">
    <param name="Scale" value="ShowAll">
    <param name="DeviceFont" value="0">
    <param name="EmbedMovie" value="0">
    <param name="BGColor" value>
    <param name="SWRemote" value><embed
    src="../Flash/Trademarks2.swf" quality="high" pluginspage="
    http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="300" height="300"
    align="right">
    </object>
    if anyone could shed any light on the subject, i would be
    most grateful!!

    now that u say it, it would have made more sense to put the message in a different forum. I'm new to all this and just cause i'm using jdev, i straight away thought of this forum. silly me!
    in answer to ur question there are no messages. when i run the app and put the cursor over where the flash should be, u can see the outline of the box and thats it.
    i just cant understand why its not working when all appears to be as it should and i know it worked previously. but then again i am new to this and its most likely something stupid i'm doing...

  • Field that is not visible in my editing screen but showing in web preview. How to remove it?

    Hi Support,
    When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
    The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
    Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
    Further information:
    I do not have any rules set for any of my fields
    I have tried to remove it in Chrome, IE and Firefox
    My cache has been cleared today
    My plug-ins and flash player are all current versions (updated today and performed a restart)
    Thanks,
    Kate

    Hi Kate,
    Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
    http://forums.adobe.com/docs/DOC-2462
    Thanks,
    Brian

  • Vendor is not extended to a Co Code but still able to create a PO

    Hi Guys
    I got an issue here. A Vendor "X "is not extended to a Company code 'Y" but still able to create a PO without any error or warning message. ( Normally system wont allow and throws a error message saying Vendor not extended to a Company Code) But its not happening here!! 
    Do we need to maintain any configuration so that SAP wont allow to use a vendor which is not extended to a particular Company Code. Or is it a Master Data Issue?
    Please help
    Thanks
    Reeves

    Charile
    Thanks for your response, Is there any way we Stop users selecting the Vendor which is not maintained to that Company Code?
    Thanks
    Reeves

  • Idoc not visible in Business system

    Hello Experts,
    I am trying to configure a scenario where in I am trying to use the IDoc ZCNOSE_PRICAT.PRICAT02.ZPRICAT1.
    However, this IDoc is not reflected in the business system in which I am using.
    I have already released the extension from the backend SAP system.
    Can you please suggest what I am missing such that the extension is visible in the Business system.

    Hi,
    You imported the idoc structure into the ESR, under a specific SWCV.
    Make sure that SWCV is linked to your Business System in the SLD.
    Kind regards,
    Dimitri

  • IDoc not visible in target R3 system

    Hello
    I am working on File-to-IDoc test scenario where I am sending CREMAS IDoc to R3 system (through IDoc receiver adapter). I performed all the necessary configuration which includes
    RFC Dest of type R3 in both the systems
    Creating ports in both the systems with port name similar to logical sys name of business system
    Creating Partner profile for the above port with Inbound message type as CREMAS
    When I am viewing the message in SXMB_MONI it shows successfully processed but Outbound status is still showing as "Message Scheduled on Outbound Processing". Also when I checked on the R3 side using we02, I could'nt find any IDoc over there. I checked in the trace where it states "Async processing completed OK".
    Am I missing any configuration on R3 side which is not processing an IDoc?
    Thanks in advance.
    Regards
    Rajeev

    Hello
    Thanks for the replies but i did configuration exactly as shown in the weblog. My RFC Destination is working fine.Also theres nothing in SM58. Also in SMQ2 "Nothing is selected" that means the message is processed successfully.
    In SXMB_MONI it shows status as "Processed Successfully" but the Outbound Status is "Scheduled for Outbound processing".
    In addition to this, I tried to test run (through SE37
    ) the FM "IDOC_INBOUND_ASYNCHRONOUS" in the receiving system with the control paramters of XI and that is creating the IDoc.
    Regards
    Rajeev

  • Mail messages not visible after importing from entourage

    I received confirmation that messages have been imported sucessfully from entourage and the imported folders have unread messages sitting in the folders. However when i try to open folder it is empty. Can anybody help?
    I am running mail 2.0.5. I thought the best solution would be to reload mail application again but i cannot locate download for mail application.

    I need help also - to anyone out there - after importing the data from Entourage, in addition to missing messages, my mail.app is now running so slow (both downloading messages and opening messages).
    The mail.app "Help" is also not opening up.
    I wanted to re-load the software also to see if it will correct everything but do not know where to get the application from - is this the best thing to do or what alternatives are there?
    Thanks,
    gailp

Maybe you are looking for