Idoc number from MASTERIDOC_CREATE_SMD_COSMAS
Hi experts,
I have got a need to save into some Z* an Idocs from the configured in WE20 interface. Also in BD60 there MASTERIDOC_CREATE_SMD_COSMAS FM to create mentioned Idocs. Is there any User-Exit or Badi for non transactional code ?
Daniel.
Hi,
I think that the only option is to implement BAdI CUSTOMER_ADD_DATA_BI. In the implementation you must write some code in the PROCESS_ALE_OWN_CHANGE_POINTER method. In your code you will have to add/modify entries to T_KNA1_KEY, T_KNVV_KEY, etc..
This BAdI is called in the PROCESS_OWN_CHANGE_POINTER subroutine, which is used in function module MASTERIDOC_CREATE_SMD_DEBMAS.
Kind regards
Edited by: Arseni Gallardo on Oct 14, 2011 10:58 AM
Similar Messages
-
Get IDoc-number from flat IDoc using dynamic configuration
Dear experts
In an IDoc2File scenario I have added the IDoc-number to dynamic configuration using the folling code in an UDF:
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey FileName = DynamicConfigurationKey.create("http:/"+"/sap.com/xi/XI/System/File","DOCNUM");
conf.put(FileName, a);
The information is stored in the SOAP message
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="DOCNUM">0000000000012345</SAP:Record>
</SAP:DynamicConfiguration>
Can anybody tell me how I can access this information in the "variable substitution" section of the CC? Perhaps something like "message:docnum"?
Additional information:
Taking the IDoc-number from the payload using e.g. "payload:ORDERS05,1,IDOC,1,EDI_DC40,1,DOCNUM,1" does not work, since the XML-IDoc has been converted to an flat-IDoc.
Thanks in advance for any good ideas
MarkusDear Rodrigo and Sarvesh
Thanks for your help so far! I applied your hints and now it is working fine.
But now I have the following additional questions
1.) My message mapping only maps the input IDoc to an output IDoc of the same type and structure. The MM is only required to process the UDF. Is there another, better solution to achieve my requirement that the IDoc-number shall be part of the filename?
2.) In the CC you have the possibility to use temporary files (section "Processing", Option "Put File" = "Use Temporary File". I think this will not work with the given solution, will it?
To possibly help somebody else or clarify the mechanism once again, I wrote down how my solution now looks like.
My UDF in the message-mapping looks like this
- Input = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- Outpt = DOCNUM of IDoc, e.g. ORDERS05/IDOC/EDIDC/DOCNUM
- UDF:
public String putDynamicConfiguration(String docnum, Container container) throws StreamTransformationException{
try
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String filename = "Prefix_" + docnum + ".txt";
conf.put(key, filename);
return docnum;
catch (Exception e)
return docnum;
In the CC the settings are now as follows
File Name Scheme = . -> only a dot or something else, because this field is obligatory, even if it is not used in this case.
Variable substitution (...)
Enable -> unchecked
Adapter-Specific Message Attributes
Use Adapter-Specific Message Attributes -> checked
Fail If Adapter-Specific Message Attributes Missing -> checked
File Name -> checked
Directory, File Type, Temporary Name Scheme for Target File Name -> unchecked
When I send an IDoc to PI and view the Adapte-Engine Version of the message (the SOAP-document, not the payload) I can find the Filename:
<SAP:DynamicConfiguration SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">Prefix_0000000000012345.txt</SAP:Record>
</SAP:DynamicConfiguration> -
Getting valid idoc number from the sales document
hi,
Iam sending the code for getting the idoc number from sales document.
but iam not getting the result.
please see the code and correct the code so that i will get the idoc number from the sales document.
tables edid4.
data l_docnum like edid4-docnum.
parameters:p_vbeln like vbak-vbeln.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
IMPORTING
OUTPUT = p_vbeln
select single docnum from edid4 into l_docnum where sdata like '&p_vbeln&'.
if sy-subrc = 0.
write edid4-docnum.
else.
write ' the record is not found'.
endif.
it is very urgent..............
thanks in advance......See the below code :
report zxyz.
tables edid4.
data l_docnum like edid4-docnum.
parameters:p_vbeln like vbak-vbeln.
<b>data sdata like edid4-sdata.</b>
start-of-selection.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = p_vbeln
IMPORTING
OUTPUT = p_vbeln
<b>concatenate '%' p_vbeln '%' into sdata.</b>
select single docnum from edid4 into l_docnum
where sdata like <b>sdata.</b>
if sy-subrc = 0.
write edid4-docnum.
else.
write ' the record is not found'.
endif.
Thanks
Seshu -
Retreiving latest IDOC number from Invoice number
Hi,
I am interested in retreiving latest IDOC number from a Invoice.
Usually we have multiple IDOC numbers for same Invoice number.
This is a report requirement.
thank you.
praveenHi,
Use NAST with the invoice to get the latest record for that output type..
use the table CMFP to get the IDOC number..The combination is
NAST-CMFPNR = CMFP-CMFPNR..
Then in the column CMFP-MSGV1 you can find the idoc number..
Thanks,
Naren -
How to find Outbound Idoc number from inbound Idoc number.
Hi,
I have one inbound Idoc in my system, then
How to find the idoc number from the system which sends that idoc(Outbound Idoc number).Hello
You can use fm SREL_GET_NEXT_NEIGHBORS for this purpose.
Scenario: An EDI purchase order is received by SAP-XI and forwarded as Inbound ORDERS IDoc to R/3. SAP-XI generates an (outbound) IDoc number which differs from the (inbound) ORDERS05 IDoc in the R/3 system.
Calling fm SREL_GET_NEXT_NEIGHBORS with the following parameters:
OBJECT-OBJKEY = <IDoc number, 16-digits>
OBJECT-OBJTYPE = 'IDOC'
MAX_HOPS = '99' " <<< get all links
I get the following result:
0000000000133906 IDOC CUSTOMER OUTIDOC
0000000000407402 IDOC INIDOC
000000370383 BUS2012 CUSTOMER OUTBELEG
0010057944 BUS2032 INBELEG
Outbound IDoc number
Inbound IDoc number (ORDERS05)
PO number
Sales order (created from inbound ORDERS IDoc)
Regards
Uwe -
Retrieve idoc number from r/3
Hi Experts.
I have an interesting issue..i am sending an idoc to r/3..asynchronously from bpm..Is it possible to get the idoc number of the idoc from the r/3 system for the same idoc that i had sent.....no the docnum is not what i am looking for, dont want to create another scenario where i retrieve it using rfc..etc...
just want the idoc number back so i can append it to the soap response..and hence wash my hands off the situation...
VenkatVenkat,
Just check this doc,if it helps https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe -
Idoc number from personal number in ECC
Hi All,
i am new to idocs ,please tell me how to get the idoc number using the personal number.https://help.sap.com/saphelp_nw04/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
01. Go to T code We09 or WE10
02.Give date range for Created on
03.Give direction : Inbound or outbound
04.Give basic Type/logical message/ Port etc ( If you know - for faster search )
05. Now next tab is Criteria for search in data record :--
a. You need Segment name : find out segment name from we02 thru some existing / known Idoc .
b. Field name : Fro WE02 can get this value
C. Once you know Segment and field name of personal number - enter all three values and execute.
You will get respective Idoc#
Hope this helps. Let us know if you need further input on this.
Best Regards/Rajesh -
Hi All
IS there a way to get the IDOC number created in the ecc system from PI? A FM or something you can call the get the ecc idoc number?IDoc acknowledgements is the way to go.
Configure ALEAUD and it should respond back with the IDoc number and what happened to the IDoc in SAP
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6550507d11d18ee90000e8366fc2/frameset.htm -
Problem in finding Idoc number from Delivery document number(VERY URGENT)
Hi experts,
I have a delivery document number.Now i have to find the Idoc number for thet delivery document and extract some necessary data from one of the segment of that Idoc.So I am not able to find a link through tables .
So I exact query is 'what is the selection method i have to follow to get the idoc number given the delivery document number'.
Regards,
Praveen.
Edited by: Praveen Jada on Mar 14, 2008 12:15 PMThat's what I meant, do the following query:
DATA: LT_DOCNUM TYPE TABLE OF EDI_DOCNUM.
SELECT DOCNUM
INTO TABLE LT_DOCNUM
FROM EDID4
WHERE SEGNAM EQ 'E1EDL20'
AND SDATA EQ '0001234567%'.
This will list you all the IDOC numbers in which delivery number 0001234567 appear in the delivery header segment.
Depending on your process it's probably going to be one entry only.
Hope that clarifies it,
Michael -
IDOC Number from payload in Alerts with out BPM
Hi Everybody,
I need to send the IDOC Number as Alert for the user.
Is it possible to do with out BPM either by Alert Frame Work or CCMS?
Is there any alternative way to capture the Idoc number and display for the erroneous messages?
Helpful Answers will be rewarded points.
Thanks,
ZabiYes,
You can also do it via alerts.
Alert can be triggered in different ways.
1) Triggering by Calling a Function Module Directly. or from UDF
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
2) Triggering by Calling a Function Module in the Workplace Plug-In.
3) Triggering with an Event Linkage.
4) Triggering with the Post Processing Framework (PPF) or Message Control (MC)
5) Triggering from a Workflow.
6) Triggering from CCMS with autoreaction.
7) Triggering from BPM.
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
8) Triggering alert by configuring a rule from RWB.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
Br,
Madan Agrawal -
Finding an idoc number from a given sales document
hi,
please send me the code for the finding idoc number for a given sales document.
it is urgent............
thanks in advance..........I written the code to find the idoc number for given Purchase order number,so you can change the code depends on your requirement
TYPE-POOLS: slis.
tables : edid4 , edidc ,edids ,lfa1,teds2.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
DATA: s_layout TYPE slis_layout_alv.
DATA: text11 LIKE E1EDP02.
DATA: text111 LIKE E1MBXYI.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
DATA: v_repid TYPE syrepid.
DATA: V_MSGNO LIKE T100-MSGNR.
*DATA: V_TEXT(90).
DATA : WA_EDIDS TYPE EDIDS.
data : begin of itab_edids occurs 0,
user like edids-UNAME,
date like edids-CREDAT,
time like edids-cretim,
idoc like edids-docnum,
MESSAGETYPE like edidc-MESTYP,
VENDOR LIKE EDIDC-SNDPRN,
name like lfa1-name1,
icon(1),
EXPAND TYPE C,
end of itab_edids.
data : itab type edid4.
data : begin of itab_edidc occurs 0,
doc_num like edidc-docnum,
MESSAGETYPE like edidc-MESTYP,
IDOCTYPE like edidc-DOCTYP,
PARTNERNUMBER like edidc-RCVPRN,
PARTNERTYPE like edidc-RCVPRT,
MESSAGECODE like edidc-MESCOD,
VENDOR LIKE EDIDC-SNDPRN,
data like edidc-credat,
*include structure edidc.
end of itab_edidc.
data : begin of itab_status occurs 0,
idoc like edids-docnum,
date_stauus like edids-logdat,
status_counter like edids-countr,
staTus like edids-status,
*descrp like teds2-descrp,
DESCRP(70),
ponumber like ekpo-ebeln,
MESS LIKE edidc-MESTYP,
*appdoc like edids-stapa1,
end of itab_status.
data : text like edid4-sdata.
DATA: text1 LIKE E1EDK01.
data : begin of itab_teds1 occurs 0.
include structure teds1.
data end of itab_teds1.
*selection-screen begin of block sb with frame title text-001.
*select-options:
s_rsdat for edidc-CREDAT.
*selection-screen end of block sb.
DATA: f_fieldcatalog TYPE slis_fieldcat_alv.
selection-screen begin of block sb with frame title text-001.
parameters:
p_su radiobutton group gp1,
p_re radiobutton group gp1,
p_al radiobutton group gp1.
select-options:
s_rsdat for edids-creDAT,
s_user for edids-uname.
selection-screen end of block sb.
initialization.
PERFORM INITIALIZATION.
start-of-selection.
PERFORM DATA_RETRIVAL.
PERFORM DATA_BASED_SELECTION.
PERFORM PASSING_ALV.
*select docnum mestyp doctyp rcvprn rcvprt mescod credat into
*table itab_edidc from edidc
*where credat in s_rsdat.
*CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
*EXPORTING
*i_program_name = v_repid
*I_INTERNAL_TABNAME = 'ITAB_STATUS'
*CHANGING
*ct_fieldcat = t_fieldcatalog.
*CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
*EXPORTING
*i_program_name = v_repid
*I_INTERNAL_TABNAME = 'ITAB_EDIDS'
*CHANGING
*ct_fieldcat = t_fieldcatalog.
s_LAYOUT-ZEBRA = 'X'.
*s_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
*s_LAYOUT-TOTALS_TEXT = 'TOTAL'.
*& Form INITIALIZATION
text
--> p1 text
<-- p2 text
FORM INITIALIZATION.
V_REPID = SY-REPID.
s_keyinfo-header01 = 'IDOC'.
s_keyinfo-item01 = 'IDOC'.
*s_layout-subtotals_text = 'SUBTOTAL TEXT'.
*s_layout-key_hotspot = 'X'.
*s_layout-expand_fieldname = 'EXPAND'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = V_REPID
I_INTERNAL_TABNAME = 'ITAB_STATUS'
I_INCLNAME = V_repid
CHANGING
ct_fieldcat = T_fieldcatalog
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = V_REPID
I_INTERNAL_TABNAME = 'ITAB_EDIDS'
I_INCLNAME = V_repid
CHANGING
ct_fieldcat = T_fieldcatalog
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
f_fieldcatalog-just = 'L'.
MODIFY t_fieldcatalog FROM f_fieldcatalog
TRANSPORTING just
WHERE ( fieldname = 'IDOC' OR FIELDNAME = 'STATUS_COUNTER' ).
f_fieldcatalog-SELTEXT_L = 'Status Message'.
MODIFY t_fieldcatalog FROM f_fieldcatalog
TRANSPORTING SELTEXT_L
WHERE fieldname = 'DESCRP'.
f_fieldcatalog-TECH = 'X'.
MODIFY t_fieldcatalog FROM f_fieldcatalog
TRANSPORTING TECH
WHERE fieldname = 'EXPAND'.
f_fieldcatalog-REPTEXT_DDIC = 'Vendor Name'.
MODIFY t_fieldcatalog FROM f_fieldcatalog
TRANSPORTING REPTEXT_DDIC
WHERE fieldname = 'NAME'.
*f_fieldcatalog-REPTEXT_DDIC = 'V Code 32122'.
*MODIFY t_fieldcatalog FROM f_fieldcatalog
*TRANSPORTING REPTEXT_DDIC
*WHERE fieldname = 'VENDOR'.
ENDFORM. " INITIALIZATION
*& Form DATA_RETRIVAL
text
--> p1 text
<-- p2 text
FORM DATA_RETRIVAL.
select uname credat cretim docnum into table
itab_edids from edids
where credat in s_rsdat and
uname in s_user and
countr = ' '.
select uname credat cretim docnum from edids
*APPENDING CORRESPONDING FIELDS OF TABLE itab_edids
where logdat in s_rsdat and
uname in s_user.
SELECT budat hkont belnr shkzg wrbtr FROM bsas
*APPENDING CORRESPONDING FIELDS OF TABLE it_temp WHERE hkont = w_glacct
*"wa_cb-gl_account
*AND bukrs IN (so_bukrs-low)
*AND budat < so_date-low.
delete adjacent duplicates from itab_edids.
if not itab_edids[] is initial.
select docnum mestyp doctyp rcvprn rcvprt mescod SNDPRN credat into
table itab_edidc from edidc for all entries in itab_edids
where docnum = itab_edids-idoc.
endif.
LOOP AT ITAB_edids.
READ TABLE ITAB_EDIDC WITH KEY DOC_NUM = ITAB_EDIDS-IDOC.
itab_edids-messagetype = ITAB_EDIDC-MESSAGETYPE.
itab_edids-VENDOR = ITAB_EDIDC-VENDOR.
MODIFY ITAB_EDIDS.
CLEAR ITAB_EDIDS.
ENDLOOP.
DELETE ITAB_EDIDC WHERE MESSAGETYPE = 'ORDERS'.
loop at itab_edids.
read table itab_edidc with key doc_num = itab_edids-idoc.
if sy-subrc ne 0.
delete itab_edids.
endif.
endloop.
select docnum logdat countr status into table itab_status from edids for
all entries in itab_edidc where docnum = itab_edidc-doc_num.
LOOP AT ITAB_STATUS.
READ TABLE ITAB_EDIDC WITH KEY DOC_NUM = ITAB_STATUS-IDOC.
ITAB_STATUS-MESS = ITAB_EDIDC-MESSAGETYPE.
MODIFY ITAB_STATUS.
CLEAR ITAB_STATUS.
ENDLOOP.
loop at itab_status.
clear : text ,text1 , text11, text111, itab.
select single descrp from teds2 into itab_status-descrp
where status = itab_status-STATUS AND
LANGUA = 'E'.
select single sdata into text from edid4 where
DOCNUM = itab_status-idoc and
segnam = 'E1EDK01'.
*MOVE: text TO text1,
text1-BELNR TO itab_status-ponumber.
itab_status-ponumber = text1-belnr.
move text+83(30) to itab_status-ponumber.
MODIFY ITAB_STATUS.
clear itab_status.
IF itab_status-MESS = 'WMMBXY'.
select single * from edid4 INTO ITAB where segnam = 'E1MBXYI' AND
HLEVEL = '02' AND DOCNUM = itab_status-idoc.
MOVE : ITAB-SDATA TO TEXT111 ,
text111-EBELN TO itab_status-ponumber.
**text1-BELNR TO ponumber.
ELSE.
select single * from edid4 INTO ITAB where segnam = 'E1EDP02' AND
HLEVEL = '03' AND DOCNUM = itab_status-idoc.
MOVE : ITAB-SDATA TO TEXT11 ,
*text1-EBELN TO ponumber.
text11-BELNR TO itab_status-ponumber.
endif.
MODIFY ITAB_STATUS.
clear itab_status.
endloop.
ENDFORM. " DATA_RETRIVAL
*& Form PASSING_ALV
text
--> p1 text
<-- p2 text
FORM PASSING_ALV.
s_LAYOUT-EXPAND_FIELDNAME = 'EXPAND'.
DATA: t_events TYPE slis_t_event.
DATA: s_events LIKE LINE OF t_events.
s_events-form = 'TOP_OF_PAGE'.
s_events-name = 'TOP_OF_PAGE'.
APPEND s_events TO t_events.
s_layout-lights_fieldname = 'ICON'.
sort itab_status by status_counter descending. " -
mod3
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = v_repid
is_layout = s_layout
it_fieldcat = t_fieldcatalog
i_callback_user_command = 'USER_COMMAND'
i_tabname_header = 'ITAB_EDIDS'
i_tabname_item = 'ITAB_STATUS'
IT_EVENTS = t_events
is_keyinfo = s_keyinfo
TABLES
t_outtab_header = itab_EDIDS
t_outtab_item = itab_STATUS
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " PASSING_ALV
*& Form DATA_BASED_SELECTION
text
--> p1 text
<-- p2 text
FORM DATA_BASED_SELECTION.
if p_su eq 'X'.
*loop at itab_status where status = '53'.
*select single stapa1 from edids into itab_status-appdoc
where docnum = itab_status-idoc and status = '53'.
*delete itab_status where status ne '53'.
*modify itab_status.
*endloop.
delete itab_status where status ne '53'.
loop at itab_edids.
read table itab_status with key idoc = itab_edids-idoc binary search.
if sy-subrc ne 0.
delete itab_edids.
ELSE.
*SHIFT ITAB_EDIDS-IDOC LEFT DELETING LEADING '0'.
MODIFY ITAB_EDIDS.
endif.
endloop.
LOOP AT ITAB_STATUS WHERE MESS NE 'WMMBXY'.
SELECT SINGLE * FROM EDIDS INTO WA_EDIDS WHERE DOCNUM = ITAB_STATUS-IDOC
AND COUNTR = ITAB_STATUS-STATUS_COUNTER.
IF WA_EDIDS-STATXT CA '&'.
V_MSGNO = WA_EDIDS-STAMNO.
IF V_MSGNO NE '000'. "----mod3
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
msg_id = WA_EDIDS-STAMID
msg_no = V_MSGNO
MSG_VAR1 = wa_edids-stapa1
MSG_VAR2 = WA_EDIDS-STAPA2
MSG_VAR3 = WA_EDIDS-STAPA3
MSG_VAR4 = WA_EDIDS-STAPA4
IMPORTING
MSG_TEXT = itab_status-descrp.
CONDENSE ITAB_STATUS-DESCRP.
ENDIF."---- mod3
ELSE .
ITAB_STATUS-DESCRP = WA_EDIDS-STATXT.
ENDIF.
*SHIFT ITAB_STATUS-IDOC LEFT DELETING LEADING '0'.
*SHIFT ITAB_STATUS-STATUS_COUNTER LEFT DELETING LEADING '0'.
MODIFY ITAB_STATUS.
ENDLOOP.
LOOP AT ITAB_STATUS WHERE MESS EQ 'WMMBXY'.
SHIFT ITAB_STATUS-IDOC LEFT DELETING LEADING '0'.
SHIFT ITAB_STATUS-STATUS_COUNTER LEFT DELETING LEADING '0'.
ITAB_STATUS-DESCRP = 'APPLICATION DOCUMENT POSTED'.
MODIFY ITAB_STATUS.
ENDLOOP.
delete adjacent duplicates from itab_edids comparing idoc.
elseif p_re eq 'X'.
loop at itab_status where status = '53'.
delete itab_edids where idoc = itab_status-idoc.
endloop.
loop at itab_status.
read table itab_edids with key idoc = itab_status-idoc binary search.
if sy-subrc ne 0.
delete itab_status.
endif.
endloop.
LOOP AT ITAB_STATUS.
SELECT SINGLE * FROM EDIDS INTO WA_EDIDS WHERE DOCNUM = ITAB_STATUS-IDOC
AND COUNTR = ITAB_STATUS-STATUS_COUNTER.
IF WA_EDIDS-STATXT CA '&'.
V_MSGNO = WA_EDIDS-STAMNO.
IF V_MSGNO NE '000'. "----mod3
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
msg_id = WA_EDIDS-STAMID
msg_no = V_MSGNO
MSG_VAR1 = WA_EDIDS-STAPA1
MSG_VAR2 = WA_EDIDS-STAPA2
MSG_VAR3 = WA_EDIDS-STAPA3
MSG_VAR4 = WA_EDIDS-STAPA4
IMPORTING
MSG_TEXT = itab_status-descrp.
CONDENSE ITAB_STATUS-DESCRP.
endif. "-----mod3
ELSE .
ITAB_STATUS-DESCRP = WA_EDIDS-STATXT.
ENDIF.
SHIFT ITAB_STATUS-IDOC LEFT DELETING LEADING '0'.
SHIFT ITAB_STATUS-STATUS_COUNTER LEFT DELETING LEADING '0'.
MODIFY ITAB_STATUS.
ENDLOOP.
LOOP AT ITAB_EDIDS.
SHIFT ITAB_EDIDS-IDOC LEFT DELETING LEADING '0'.
MODIFY ITAB_EDIDS.
ENDLOOP.
delete adjacent duplicates from itab_edids comparing idoc.
elseif p_al eq 'X'.
delete adjacent duplicates from itab_edids comparing idoc.
LOOP AT ITAB_STATUS." WHERE MESS NE 'WMMBXY'.
SELECT SINGLE * FROM EDIDS INTO WA_EDIDS WHERE DOCNUM = ITAB_STATUS-IDOC
AND COUNTR = ITAB_STATUS-STATUS_COUNTER.
IF WA_EDIDS-STATXT CA '&'.
V_MSGNO = WA_EDIDS-STAMNO.
IF V_MSGNO NE '000'. "----mod3
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
msg_id = WA_EDIDS-STAMID
msg_no = V_MSGNO
MSG_VAR1 = WA_EDIDS-STAPA1
MSG_VAR2 = WA_EDIDS-STAPA2
MSG_VAR3 = WA_EDIDS-STAPA3
MSG_VAR4 = WA_EDIDS-STAPA4
IMPORTING
MSG_TEXT = itab_status-descrp.
CONDENSE ITAB_STATUS-DESCRP.
endif. "----mod3
ELSE .
ITAB_STATUS-DESCRP = WA_EDIDS-STATXT.
ENDIF.
*SHIFT ITAB_STATUS-IDOC LEFT DELETING LEADING '0'.
*SHIFT ITAB_STATUS-STATUS_COUNTER LEFT DELETING LEADING '0'.
MODIFY ITAB_STATUS.
ENDLOOP.
endif.
LOOP AT ITAB_EDIDS.
if p_su EQ 'X'.
itab_edids-icon = '3'.
elseif p_re eq 'X'.
itab_edids-icon = '1'.
ELSE.
read table itab_sTATUS with key idoc = itab_EDIDS-idoc
STATUS = '53' ."binary search.
IF SY-SUBRC EQ 0.
itab_edids-icon = '3'.
ELSE.
itab_edids-icon = '1'.
ENDIF.
ENDIF.
select single name1 from lfa1 into itab_edids-name where
lifnr = itab_edids-vendor.
SHIFT ITAB_EDIDS-IDOC LEFT DELETING LEADING '0'.
MODIFY ITAB_EDIDS.
clear itab_edids.
ENDLOOP.
loop at itab_status.
SHIFT ITAB_STATUS-IDOC LEFT DELETING LEADING '0'.
SHIFT ITAB_STATUS-STATUS_COUNTER LEFT DELETING LEADING '0'.
if itab_status-descrp is initial.
select single descrp from teds2 into itab_status-descrp
where status = itab_status-STATUS AND
LANGUA = 'E'.
endif.
MODIFY ITAB_STATUS.
clear itab_status.
endloop.
sort itab_status by idoc.
sort itab_edids by idoc.
ENDFORM. " DATA_BASED_SELECTION
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
SKIP.
ULINE.
IF P_SU EQ 'X'.
WRITE : / 'TITLE : SUCCESSFULLY POSTED IDOC', 50 'DATE :', SY-DATUM..
ELSEIF P_RE EQ 'X'.
WRITE : / 'TITLE : REJECTED IDOCS' ,50 'DATE :', SY-DATUM.
ELSEIF P_AL EQ 'X'.
WRITE : / 'TITLE : ALL IDOCS' ,50 'DATE :', SY-DATUM.
ENDIF.
WRITE :/9 'Successful-Green light Unsuccessful-Red Light'.
format color COL_TOTAL intensified on.
WRITE : / 'NOTE : DOUBLE CLICK TO SEE CORREPONDING IDOC AND PO'.
WRITE :/9 'DOUBLE CLICK IDOC NO ON HEADER LIST'.
WRITE : 'AND PO NUMBER ON DETAIL LIST'.
format color off.
ULINE.
SKIP.
ENDFORM. "TOP_OF_PAGE
FORM user_command *
--> UCOMM *
--> SELFIELD *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA: WA_IDOC9 LIKE EDIDC-DOCNUM.
DATA: SELTAB TYPE TABLE OF RSPARAMS,
SELTAB_WA LIKE LINE OF SELTAB.
RANGES : R_DATE FOR EDIDC-CREDAT." SY-DATUM.
IF ucomm = '&IC1'.
if SELFIELD-SEL_TAB_FIELD = 'ITAB_EDIDS-IDOC'.
READ TABLE itab_edids INDEX selfield-tabindex.
IF sy-subrc = 0.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = ITAB_edids-IDOC
IMPORTING
OUTPUT = WA_IDOC9.
*r_date-low = itab_edids-date.
*r_date-high = itab_edids-date.
*r_date-SIGN = 'I'.
*r_date-OPTION = 'BT'.
*append r_date.
SUBMIT RSEIDOC2 WITH DOCNUM = wa_idoc9
WITH CREDAT in R_DATE[] AND RETURN.
ENDIF.
ELSEIF SELFIELD-SEL_TAB_FIELD = 'ITAB_STATUS-PONUMBER'.
READ TABLE itab_STATUS INDEX selfield-tabindex.
IF sy-subrc = 0.
SET PARAMETER ID 'BES' FIELD itab_sTATUS-PONUMBER.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDIF.
ENDIF.
ENDFORM..
Thanks
Seshu -
I have created some outbound IDOCs for a PO. Is there an easier way to programatically find the IDOC numbers corresponding to the PO ? (Other than querying on EDID4 table and scanning the SDATA field ).
THanks.Hi Shareen,
To get IDOC no from a PO no you will have to write a custome function module to do this,
you can use the follwing code for custome function module, which will take PO number, IDOC message type and Idoc type(basic type) as an input parameter and provide details of the IDOCs.
FUNCTION ZSTEST.
""Local interface:
*" IMPORTING
*" REFERENCE(PONUMBER) LIKE EKKO-EBELN
*" REFERENCE(MESTYP) LIKE EDIDC-MESTYP
*" REFERENCE(IDOCTYPE) LIKE EDIDC-IDOCTP
*" TABLES
*" IDOCINFO STRUCTURE EDIDC
DATA: int_edidc TYPE edidc OCCURS 100 WITH HEADER LINE.
DATA: int_edidc1 TYPE edidc OCCURS 100 WITH HEADER LINE.
DATA: int_edidd TYPE edidd OCCURS 100 WITH HEADER LINE.
DATA: time_0 LIKE edidc-updtim VALUE '000000',
time_24 LIKE edidc-updtim VALUE '240000'.
DATA: value1_2 TYPE edipar0002-edi_value.
DATA: SEGMENT1 LIKE EDISYN-SEGTYP value 'E1EDK01'.
DATA: found1_1 TYPE c, found_1 TYPE c.
DATA: offset1_1 TYPE i value '84', end1_1 TYPE i value '118'.
RANGES : CRETIM FOR EDIDC-CRETIM,
CREDAT FOR EDIDC-CREDAT,
UPDTIM FOR EDIDC-UPDTIM,
upddat FOR EDIDC-upddat,
direct FOR EDIDC-direct,
docnum FOR EDIDC-docnum,
status FOR EDIDC-status,
IDOCTP FOR EDIDC-IDOCTP,
cimtyp FOR EDIDC-cimtyp,
mestyp1 FOR edidc-mestyp,
sndpor FOR EDIDC-sndpor,
sndprt FOR EDIDC-sndprt,
sndprn FOR EDIDC-sndprn,
rcvpor FOR EDIDC-rcvpor,
rcvprt FOR EDIDC-rcvprt,
rcvprn FOR EDIDC-rcvprn.
CRETIM-SIGN = 'I'.
CRETIM-OPTION = 'BT'.
CRETIM-LOW = time_0.
CRETIM-HIGH = time_24.
APPEND CRETIM TO CRETIM.
CREDAT-SIGN = 'I'.
CREDAT-OPTION = 'BT'.
CREDAT-HIGH = SY-DATUM.
APPEND CREDAT TO CREDAT.
UPDTIM-SIGN = 'I'.
UPDTIM-OPTION = 'BT'.
UPDTIM-HIGH = time_24.
APPEND UPDTIM TO UPDTIM.
IDOCTP-SIGN = 'I'.
IDOCTP-OPTION = 'EQ'.
IDOCTP-LOW = IDOCTYPE.
APPEND IDOCTP TO IDOCTP.
mestyp1-SIGN = 'I'.
mestyp1-OPTION = 'EQ'.
mestyp1-low = mestyp.
APPEND mestyp1 TO mestyp1.
found1_1 = ' '.
found_1 = ' '.
SELECT * FROM edidc INTO TABLE int_edidc
WHERE upddat >= credat-low
AND cretim IN cretim
AND credat IN credat
AND updtim IN updtim
AND upddat IN upddat
AND direct IN direct
AND docnum IN docnum
AND status IN status
AND idoctp IN idoctp
AND cimtyp IN cimtyp
AND mestyp IN mestyp1
AND sndpor IN sndpor
AND sndprt IN sndprt
AND sndprn IN sndprn
AND rcvpor IN rcvpor
AND rcvprt IN rcvprt
AND rcvprn IN rcvprn
ORDER BY PRIMARY KEY.
LOOP AT INT_EDIDC.
IF NOT PONUMBER IS INITIAL.
CLEAR INT_EDIDD.
REFRESH INT_EDIDD.
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
document_number = int_edidc-docnum
IMPORTING
IDOC_CONTROL =
NUMBER_OF_DATA_RECORDS =
NUMBER_OF_STATUS_RECORDS =
TABLES
int_edids =
int_edidd = int_edidd
EXCEPTIONS
document_not_exist = 1
document_number_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
IF NOT segment1 IS INITIAL.
LOOP AT int_edidd WHERE segnam = segment1.
found1_1 = ' '.
SEARCH int_edidd-sdata FOR PONUMBER STARTING AT offset1_1
ENDING AT end1_1.
IF sy-subrc = 0.
found1_1 = 'X'.
ENDIF.
IF found1_1 = 'X'.
MOVE-CORRESPONDING int_edidc TO int_edidc1.
APPEND int_edidc1.
CLEAR int_edidd-sdata.
found_1 = 'X'.
EXIT.
ENDIF.
ENDLOOP.
IF found_1 = 'X'.
IDOCINFO[] = int_edidc1[].
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFUNCTION. -
Saving IDOC Number from control_record_out before IDOC goes out.
Hi,
How would I save the IDOC number so that I can maintain a table with
Idocnumber
Document Number
Date
Etc
The IDOC num is not populated until the system finally does save the idoc and send it? Right?
Need that IDOC number via an exit or something.
thanks.Use function SREL_GET_NEXT_RELATIONS to rather get the link after the IDOC has gone out.
Any better/easier ways?
regards -
Idoc number from sales order in ECC
Hi,
Sales order is created by processing an Idoc. Now i want to trace back the idoc number for the sales order created.
Please let me how we can do this in ECC. I saw couple of posts stating ICON SERVICE FOR OBJECTS...i couldn't really identify that icon. In someother post i saw this can found under Environment.
Please let me know whether there are any prerequisites for this, and how i can i achieve this in ECC?
Thank You in Advacne
Thank You
ChallaHi Challa,
To find which idoc created the sales order, you can do the following,
Check for the customer PO no in the sales order.
Then go to any other inbound idoc which is bound to create a sales order, and see in which segment is the PO number.
Then go to WE09 and put the dates etc and then go to " Criteria for search in Data Records"
Put the segement no in Search in segement field.
Put the idoc field in which you see the PO number
and put the PO no in the " for Value" field and execute.
You will get the idoc which created the sales order.
Let us know.
Regards,
SB -
How can we find the Idoc number which posts the material document in SAP
Hi All,
How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
Thanks
ChandruHi,
In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
regards
suresh
Maybe you are looking for
-
Hi Guys, We have reporting requirement with details from Material cost to General ledger. This is variance report with comparison of Divisional standard cost on material(split by cost components) to amount posted to general ledger. Flow of data Mater
-
Creating a Data Entry Form combining 2 or more tables like a Master Detail
I have a client requirement to create a data entry form which shows fields from 3 different tables joined by linking key. The data entry form should allow the user to enter a new record details. This should populate into 1 or more tables. Example: Us
-
Adding Pages template from iTunes
I just downloaded the "Templates for Pages" though the APP store. I have a MAC OS X Version 10.7.4..I downloaded this app successfully and now I have no idea where it is or how I can access it for use. Any thoughts on where to activtae this 24.99 $ p
-
* Best option for 4:3 letterbox SD when shooting in 16:9 *
Can some tell me what workflow or option is the easiest, fastest and looks the best for 4:3 letterbox? No.1 Shoot 16:9 HD Edit 16:9 HD Export 16:9 SD DVD Studio Pro 16:9 letterbox Display mode No. 2 Shoot 16:9 HD Down convert 16:9 SD Edit 16:9 SD Exp
-
I have a Mac OS X Lion. I have tried several suggestions as to how to fix my Safari problems...and none have worked. Months ago, I took my computer to the Apple store, they wiped the hard drive, loaded Lion operating system. I reinstalled everything