Idoc number in email

Hi,
We have solman 7.1 with oracle DB on HP-UX.
i have configured the CCMS alerts for IDOC interface errors and assigned auto reactions for that.
In the methods parameter SUBJECT_ALERT_CONT i have given $NODENAME.
My problem is that i dont get the idoc no. which produced the error.
So pls help me configure this so that i can get emails with the IDOC numbers!
Thanks
Nanda

Hi Kumar,
of course I am aware that you do not have a BPM scenario yet. But I can only highly recommend to use it. You have SolMan 7.0 and you have a problem that is solved by BPMon as standard functionality. Setting up the BPMon scenario is less or equal effort than doing the CCMS setup. But the capabilities in BPMon are far more powerful and better suit your needs.
All you need to do is create one dummy business process with at least one dummy process step (you can call the step IDoc monitoring). And then you are good to go for IDoc monitoring configuration as explained in the Setup documents.
If you are starting from scratch aynway it would be nonsense to start with CCMS monitoring in this area when other customers (after using IDoc or qRFC monitoirng via CCMS for years) are moving to BPMon for this purpose as CCMS monitoring is insufficient for IDoc monitoring.
Best Regards
Volker

Similar Messages

IDOC Failure Notification-email

Hi,
I have a inbound IDOC, I need a way to send notifications (emails) when ever errors occur (IDOC status is RED). Is there any standard procedure which serves my requirement or can any one please tell me the procedure that I should follow.
Thank you.
Prashanth A.

Hi Prashant,
U can check the idoc number from the edid4 table and for that particular idoc number check the status in the EDIDS table . If the status (check the number in we02)is error thn use the standard function modules to post an email.
Guess this wud solve ur problem.All this has to be done in the inbound function module tht u attach to ur process code.This is done before the idoc is posted n entries are made to the database .
Reward valuable answers.
Regards,
Shrita.
Message was edited by: shrita sharma

Same Idoc number reprocess

Hi,
I have a requirement that I want to reprocess successful outbound Idoc number, without generating the new Idoc number.
Thanks and Regards,
B Ramanjaneyulu Reddy

Hello Raj,
"I have a requirement that I want to reprocess successful outbound Idoc number, without generating the new Idoc number. "
As per your disc. with above forum .
Can u please forward/send me the same customized program which will change status 03 to 30.
my email id is [email protected]
Thanks in advance.
Regards,
Nitin

Message with IDOC number, created by LSMW, missing in job log in SM37

Hi gurus,
We have a temporary interface which uses LSMW to create IDOCs and update in SAP. It's used for materials, BOMs and document info records. In LSMW we have defined standard message types MATMAS_BAPI, BOMMAT and DOCUMENT_LOAD for the IDOCs. All these have the same problem.
A background job runs and starts LSMW. In the job log in SM37 I want to see which IDOCs were created. For some reason this is different in my development system and my test system, and as far as I know all settings should be the same. In the test system LSMW creates more message lines in the job log, than it does in the dev system. Message number E0-097 is "IDOC XXXX added", and this is missing in the dev system.
This is what it looks like in the dev system:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW   509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW   502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW   513    I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')       /SAPDMC/LSMW 516    I
And this is what it looks like in the test system. More information, which is exactly what I want in dev system too:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW 509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW 502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW 513    I
File 'XXX.lsmw.conv' exists                                                                              /SAPDMC/LSMW   502   I
IDoc '0000000002489289' added                                                                      E0                         097   S
File 'XXX.lsmw.conv' transferred for IDoc generation                                      /SAPDMC/LSMW   812   I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')      /SAPDMC/LSMW   516   I
In both cases the IDOC is created and update works fine.
My only issue is that I can't see the IDOC number in the dev system. I know I can get the IDOC number in WE02, but in this case we have program logic which reads the job log to be able to check IDOC status before sending OK message back to the other side of the interface.
I hope any of you can have an idea how I can update somewhere to get message E0-097 with IDOC number into the log.
Regards,
Lisbeth

Hi Arun,
If you want to show your messages in the job log you have to use the MESSAGE statement. In case you use WRITE statements an output list be created which can be found in the spool (there is an icon to go to the spool directly).
Regards,
John.

IDOC number is not in the list

Hi,
I am creating an inbound delivery using IDOC. The message type is DESADV and basic type is DELVRY01. After I have populated the control and data tables, I processed them using IDOC_WRITE_AND_START_INBOUND. I have generated the IDOC number after executing the program. The problem is, when I go to WE02, the idoc number is not the list. I am not sure if the IDOC I generated is successful or not. Does it have something to do with the FM that I used. I set a custom process code that will call the FM IDOC_INPUT_DESADV1. Please advise. Thanks in advance.
Lalyn

Hi Arun,
Thanks for the reply. But the IDOC number is not in the list and I can't access it WE19. Do you have any other Function module that I can use to process the IDOC in ABAP? The Function module should be the one to call the FM IDOC_INPUT_DESADV1 to create an inbound delivery. That's what I think causes the error. Thanks.
Lalyn

Finding out Idoc number of the Invoice List

Hi!
how to find out Idoc numberr if I have number of Invoice List?
For example, I have number of Invoice List for checking it in tcode VF22, but how to get Idoc number of the Invoice List in order to check it in WE02?
Will reward,
Mindaugas

Hi,
Use NAST with the invoice to get the latest record for that output type..
use the table CMFP to get the IDOC number..The combination is
NAST-CMFPNR = CMFP-NR..
Then in the column CMFP-MSGV1 you can find the idoc number
<b>Reward points</b>
Regards

Standard Report with IDOC Number and PR number

Hi
My client need the Standard report with the combination fields of " Purchasing Number , Requirements tracking number in PR,
IDOC number , IDOC Processing status. "
(Our PR will generates through IDOC from other system via XI interface)

Hi Nagendra,
for Purchasing Number , Requirements tracking number in PR you can use -ME5A
Purchasing Number-EBAN-BANFN
Tracking number goto- MELB.
table name-EKPO
for IDOC number , IDOC Processing status -we09
For IDOC number -EDID4-DOCNUM
IDOC Processing status-EDIDC-STATUS
Regards,
Krishna.
Edited by: kris_hna on Sep 8, 2011 1:14 PM
Edited by: kris_hna on Sep 8, 2011 1:19 PM

Is there a limit to the number of email addresses in one message?

Hello
Is there a limit to the number of email addresses in one message with Mac Mail?
I am trying to send out to c900 email addys and am being told my server does not recognise the email addresses. I will check with the folks hosting the email also.
Many thanks
Matthew Causon

Ooh, yes, 900 emails at once will absolutely not work (unless you get very very lucky).
If this is just a one-off, you should group the addresses into, at the very most, 50 addresses, and send batches. If you're doing this a lot, I would recommend using something like DirectMail.
Matt

How do I reduce the number of emails showing on my iPhone?

How do I reduce the number of emails on my iPhone 5, without deleting the account? It's a POP account.

You read unread messages to reduce the notifcation number.
You delete messages to reduce the number showing as available.

How can I limit the number of emails retained on my ipad air?

How can I limit the number of emails that are retained on my iPad Air? Because of legal requirements of a long-term project, I cannot permanently delete emails relating to that project from my ISP's mail server. My gmail account contains over 17,000 emails and, upon setting up my new iPad, and updating to ios 7.1.1, I now have all 17,000+ emails taking up space. I would like to limit the emails by count as I was able to do on my old iPad running ios 5.1.1 OR to retain them based on date range. I have not found any instructions on the support discussions or general iPad blogs that allow me to do that. Any way around this problem?
I also miss the 5.1.1 mail search feature that allowed me to narrow the search by from/to/subject/all. Does anyone know if that feature is available using some little-known ios 7.1.1 feature?
Thanks for your help.

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

How do you combine iMessage sent to phone number and email?

I talk to someone who sends me imessages to my phone number from their phone, and also from their ipad to my email. Both phone number and email are under the same contact. But the mesages go into 2 different threads. Id like to combine them since being under the same contact they show up exactly the same in the messages list.. so i cant tell if im messaging the ipad or the phone..
ideally id like to write a message to that contact and it would go to both their ipad and iphone...
anyways.. how do I combine them?

This is possible and you can also send and receive iMessages to your MacBook from one phone number without having to use any email address whatsoever. This also means you will have one chat thread with all of your messages not two.
Anyone will tell you that I am a hardcore Apple Fan, however, sometimes they lack in the instructions area. For a while now I have had a problem with iMessages being sent from my MacBook. I could send an iMessage from my phone with no problem and my friend would receive it from my phone number however, the problem would arise when I would send a iMessage from my MacBook to to the same friend and a new thread would be created, so in essence she would have two different messages for me, one from my phone number and one from my email. After numerous attempts of contacting Apple Customer Service with no avail, I eventually figured it out on my own. I did aggrate some friends because I had to send messages relentlessly. In the end I found a solution and here are the instructions.
You’re going to go into iMessage on your computer, go to messages in the top left, click on preferences and then click on accounts. Look under “you can be reached for messages at” you should see your email and or your phone number.
If you do not see your phone number you need to add it to your account at this site. “https://appleid.apple.com/” click on manage your Apple ID and then sign in. After you sign in you will go to another screen and on your left you’ll see a list of choices click on phone numbers. Add your phone number and click save changes. It usually takes a few seconds for your iMessage account to update. Completely quit iMessage in the toolbar and then reopen it and go back into messaging preferences and then accounts.
After that has been done your phone number should now be added to the “you can be reached for messages at” section. Click on your phone number and then uncheck your email address.
Then go into your iPhone settings, messages, then scroll down to send and receive. Uncheck any email, only your phone number should have a checkmark, if your phone number does not have a checkmark... check it. You should receive a pop-up on your iPhone saying so-and-so’s MacBook is now using “insert phone number here” for iMessages.

How can we find the Idoc number which posts the material document in SAP

Hi All,
How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
Thanks
Chandru

Hi,
In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
regards
suresh

How do I increase the number of emails in my inbox it is only showing 5. I have a 5c.

How do I increase the number of emails in my inbox. It only shows 5.

That issue can be caused by the FastestFox extension.
* FastestFox Options > General, uncheck "Enhance Awesomebar"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

How do I limit the number of emails that show in my active mailbox? There was a way in Settings on ios 6, but i can't find it in ios 7.

You need to delete your current hotmail account set up on your iphone.
Once this has done click 'Add Account' and select the new 'outlook.com' tab.
Set up your hotmail account again from scratch and this will then allow you to select how many weeks/months of emails you sync to your phone.
Im not sure if anyone else had a similar problem to me prior to iOS 7, but if i deleted an email from my hotmail account on my iphone - it wouldnt sync with my actual hotmail account. So when i logged in online all the emails I had deleted on my phone would still be showing as unread.
But by setting the account up as above, they now sync perfectly.
Well for me anyway

Idoc number in email

Similar Messages

Maybe you are looking for