IDoc Object type

What is an IDoc object type and how to create it.
This is in redfernce to the seconfd screen a person has to enter when he is creating a new process code for inbound processing.

Hi,
If you see the F1 help for this field it says that "Object type contains the method and events for error processing of IDOCs of s specific message type".
Look at the inbound process code INVL. Hit the button right adjacent to the Function module for process code INVL. Here you can see how and what entries are made on this screen.
Let me know if you have any question.
Regards,
RS

Similar Messages

IDoc Error -Instance of object type could not be changed

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
Please suggest on this
Thanks
Ajit

Hi Madhu
All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
Please sugest how can I process allthese IDocs.
Thanks
Ajit

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

IDOC - process code with error "Application Object Type not planned'

Hi all,
I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
Why is this so?
Please advice...
Thanks and regards...
William Wilstroth

HI all,
I had solved this problem. I should have gone to we57 to tie the function module.
thanks.
William Wilstroth

MRESCR01 inbound IDOC error: "Object type 'TRANSID ' has no relationship '

Hello,
I am trying to get an inbound IDOC from XI to a SAP R/3 System.
It's an extended idoc (MRESCR01) for create orders.
The error at /we02 in the inbound system is:
Object type 'TRANSID ', key '0A1F032A59B345D027B002DE ', log.system ' ' has no relationship 'OUTTID '
Message no. RL007
Diagnosis
All the roles used in relationships of type 'OUTTID' should be found for object type 'TRANSID' with key '0A1F032A59B345D027B002DE' in logical system ''.
System Response
No such roles were found.
Further information:
XI process message succesfully, with the Z segments extended information. But, at the WE02, only one of the 3 extended segments arrives to SAP R/3.
Thanks a lot for your help, best regards

thanks shridar and michal for response.
these solution solved the problem of the segments. now the 5 arrives to SAP R/3.
but i keep getting the error and IDOC is not processed:
IDOC STAT = Status 51
Object type 'TRANSID ', key '0A1F032A59B345D03A7A0A26 ', log.system ' ' has no relationship 'OUTTID '
Message no. RL007
Diagnosis
All the roles used in relationships of type 'OUTTID' should be found for object type 'TRANSID' with key '0A1F032A59B345D03A7A0A26' in logical system ''.
System Response
No such roles were found.
Thanks and best regards,

Urgent: Application Object Type for ALE IDoc

Hi All,
I am struggling with ALE IDoc, I just wanted to know that is it mandatory to create Application Object Type when i have created my own message type, Idoc type, segment type and Function Module. I am Getting an error while excuting transaction we42( Maintaining Process code)
Error: Application Object Type is not planned.
Please Help with this. i don't have any requirement of filtering or serialisation, so still do i need to create these application objects.
Useful ans will be rewarded.
Thanx

Hi,
Yes u need to have the assignment of Object type as ur extending the IDOC.
Check the steps below:
TCode- BD95.
Create ALE object type Z... with table name EKKO and Field name -BSART
Step2:
Tcode- BD59 Assignment of Object type to Message
Give the message type ORDERS.
Assign the object type Z........ to segment type E1EDK01 with field BSART.
Regards
Kannaiah

Serialization by Object Type of IDOCS Out of XI

Hi,
I have the following scenario:
File>XI>SAP DEBMAS IDOC(s)
If an IDOC errors out (bad data sent in, customer locked etc.) it is going to create a work item on the receiving SAP system that will be reprocessed by a business user.
The situation I want to prevent is this:
IDOC 1 -
Updates customer 100.
Changes the street to 222 Main St.
This IDOC errors out because customer 100 is locked. A work item gets created for reprocessing.
IDOC 2 sent in before the work item is reprocessed -
Updates customer 100. Customer is no longer locked.
Changes the street to 222 Main St South.
Now the work item is reprocessed and the customer is updated to 222 Main St when it should be 222 Main St South.
I think I can use serialization to prevent the second IDOC from being processed before the 1st IDOC is successfully processed. However, I would like to allow an IDOC for customer 300 to be processed even if an IDOC for customer 100 is in error.
Can I use Serialization By Object Type to accomplish this?(http://help.sap.com/saphelp_erp2004/helpdata/en/0b/2a66c9507d11d18ee90000e8366fc2/frameset.htm)
Help.sap shows me how to set up the Serialization on the receiving SAP system. However it states that the serialziation has to be set up on both systems. Does this mean that I just do that same config on the XI system? How does XI support the Serialization By Ojbects concept?
Thanks,
Jeff

HI Jeff,
My thoughts below....
XI has to do the Job that would have been done by an SAP sending system...
For instance, based on an object key some serialization numbers needs to be created & attached to the IDOC control record.
I donot have access to a system right now...but one should be able to do this in many ways...
One way i would do is like this...Enable serialization (say for customer master from the SAP system which i have access to)...Trigger some IDOCs making changes to different master records..see how the numbering is done by the SAP System and how it is attached to the IDOC(This is just to do a similar process as sap would do)....
Once i see how SAP does it while sending the IDOCs, i will genearate a number on XI abap stack using a number range object & attach it to the IDOC as though it was done by the sending system...
My 2 Cents...
Thanks,
Renjith.

IDOC - Application object type not planned

Hi all,
I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
Why is this so?
Please advice...
Thanks and regards...
William Wilstroth

Sorry... i think this should be in Data Transfer section

Problem with creation of IDOC Segment Type

Hi,
I tried to create IDOC Segment Type Z1LFA1 but error
prompted "Structure Z1LFA1 already exist.".
I tried deleting it at se11 but prompted
"You cannot edit object R3TR TABL Z1LFA1 with the
standard editor"
and at sm30-TADIR, but prompted
with "Cannot delete object directory entry, object exists."
How will go about this??
Please help!
Thanks!

hi,
yup, tried doing that on we31 but the segment does not exist yet.
we're currently upgrading from 4.6 to ecc, I think the structure
was tranferred to our ecc client but the idoc segment and idoc type were not. I'll just have to transport it then.
Thanks!

How to get the segment detials of IDoc message type.

Dear Friends,
I want to write function module , which takes the IDOC message type as an input and returns all the segment fields in response.
Basically I want to get the XML schema of a IDOC message type and need to expose these details toa 3rd party application to use.
Dear experts ,Please do give me some ideas how to achieve this .
like tables from where i can get these details or u feel any other goos way of doing the same.
thx,
jeevan

Hello experts,
Please participate .........
To redefine my objective I will say:--
I am trying to do some thing very similar that is there in XI .
You might have seen the way IDOCs are shown while mapping an idoc structure.
Its like you select a message type and u get all the list of Idoc Structure shown .
I am really relying on you people.
thx ,
jeevan

Problems with PROOF field in idoc (message type HRMD_A)

Hello,
I'm using the standard message type HRMD_A with IDOC base type HRMD_A06 and the function module IDOC_INPUT_HRMD.
I have a doubt with field 'PROOF' when I fill the IDOC. Does anybody know for what is it used? For example, what's going to happen if I put PROOF = 'X' in an update operation?
In my case I have tested that when PROOF = 'X', I receive the following warning in intotype 0001:
    The EMPLOYEE_ORG_ASSIGNMENT-ADMINISTRATOR_GROUP field is not maintainable in dialog, so it is ignored
    The EMPLOYEE_ORG_ASSIGNMENT-ORG_UNIT field is not maintainable in dialog, so it is ignored
    The EMPLOYEE_ORG_ASSIGNMENT-COSTCENTER field is not maintainable in dialog, so it is ignored
but I cannot be sure if these warnings are due to PROFF.
In the change data record screen, I have filled the following fields: plan version ('01'), object type ('P'), object id (employee number), PROOF ('X'), Operation ('U'). Structure for the idoc is EDIDC->E1PLOGI->E1PITYP.
Any help on this?

Hello,
I'm using the standard message type HRMD_A with IDOC base type HRMD_A06 and the function module IDOC_INPUT_HRMD.
I have a doubt with field 'PROOF' when I fill the IDOC. Does anybody know for what is it used? For example, what's going to happen if I put PROOF = 'X' in an update operation?
In my case I have tested that when PROOF = 'X', I receive the following warning in intotype 0001:
    The EMPLOYEE_ORG_ASSIGNMENT-ADMINISTRATOR_GROUP field is not maintainable in dialog, so it is ignored
    The EMPLOYEE_ORG_ASSIGNMENT-ORG_UNIT field is not maintainable in dialog, so it is ignored
    The EMPLOYEE_ORG_ASSIGNMENT-COSTCENTER field is not maintainable in dialog, so it is ignored
but I cannot be sure if these warnings are due to PROFF.
In the change data record screen, I have filled the following fields: plan version ('01'), object type ('P'), object id (employee number), PROOF ('X'), Operation ('U'). Structure for the idoc is EDIDC->E1PLOGI->E1PITYP.
Any help on this?

Problem in HRMD_A Idocs: Object is Locked

Hi Everyone,
I would like to ask for assistance on the problem below.
We've encountered almost everyday failed HRMD_A idocs. Almost all of the idocs have the same error message: "Object is Locked. A locked key has been set for the object."
The object type is "P".
Can you help us on how to solve this problem?
Thanks in advance!

Hi,
For the locked object the sender system itself will not send the idoc.
and hence the error for the lock object might have been seen in the sender system and not the receiver system.
Yes you can process the idocs which are in error in the receiver system by frequently scheduling reports like
RBDMANI2-Schedule update of idocs with errors and
RBDAPP01- for ready for transfer idocs
I suggest you use the bapi way of transferring data, where the receiving system reads data from the sender system once a day and reads only that data which is changed during that date.
Regards,
Divya

Sender object type for price catalog in Generation of BizPackage

what is sender object type for price catalog in Generation of BizPackage and BIU under bizPackage Generate (SAP B1iSN Tools)
i should put PRICAT (the msgtype in the model view or PRICAT02 in standard basic IDoc types)
Thanks
elson

If i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
<?xml version="1.0" encoding="utf-8" ?>
<BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
<BO>
     <AdmInfo>
          <Object>4</Object>
          <Version>2</Version>
     </AdmInfo>
     <Items>
          <row>
               <ItemCode>AAAAAA</ItemCode>
               <ItemName>BBBBBBBBB</ItemName>
          </row>
     </Items>
     <Items_Prices>
          <row>
               <PriceList>1</PriceList>
               <Price>27.400000</Price>
               <Currency>EUR</Currency>
          </row>
          <row>
               <PriceList>2</PriceList>
               <Price>0.000000</Price>
               <Currency>USD</Currency>
          </row>
     </Items_Prices>
     <ItemWarehouseInfo>
          <row>
          </row>
     </ItemWarehouseInfo>
     <ItemPreferredVendors>
     </ItemPreferredVendors>
</BO>
</BOM>
BR

Assigning Filter Object Type for Internal Order

Hi All,
I have a requirement to send a INTERNAL_ORDER IDOC to another system on creation or on change of an order. I have created the model view and added the BAPI InternalOrder.SaveReplica in the distribution model (BD64) and the next step was for me to add a filter. I tried creating a filter group but then I get the message "Select node:Content-dependent parameter filtering". I have done a similar configuration for PROJECT idoc before and I was able to solve this by configuring in BD95 - Defining the filter object type and then BD81 - Assigning the filter object type to the parameter. However now when I try and implement the same steps for the Internal Order IDOC, I am having trouble assigning a filter object type to a parameter. I want to filter by company code and so far I was able to define the filter object type (BUKRS) in BD95 and then when I go on to try and assign this to the BAPI Parameter in BD81 , only 1 parameter appears (objectstatus) when I drop down for the parameter options.
The row entry that I am trying to add is:
Obj. Type
Method
Filter object type
Parameter
Field Name
BUS2075
SAVEREPLICA
BUKRS
MASTERDATA
COMP_CODE
But only OBJECTSTATUS appears in the Parameter block as an option when I press F4.
Further more when I try save the entry as above, I get an error. Error Message: "Entry MASTERDATA does not exist in (check entry)"
Can I please get some guidance on how to filter the internal order by company code or more importantly advise on which step I may have skipped in order have “MASTERDATA” appear as an option for Parameter field in BD81.
Thank you.

Hi,
I need to pass object key or object type to a function module 'SAP_WAPI_WORKITEMS_TO_OBJECT'. This function module returns the worklist details(workflow inbox). In worklist details i need to use the field for workitem id.
Regards,
Gautham

It is showing as error *Instance of object type PO could not be changed*

HI Gurus,,
i have requirement in PO Change IDOC , i have tested this IDOC .. but it is showing in Status record as error Document is does not exist
and in Segmentheader for E1BPMEPOHEADER ..it is showing as error Instance of object type PO could not be changed
SEGMENT NAME : E1BPMEPOHEADER
PO_NUMBER
COMP_CODE
DOC_TYPE
CREAT_DATE
VENDOR
PURCH_ORG
PUR_GROUP ;;;
we have entered related entries in it ...
am uanble to find out where is porblem lies in it... plz help ASAP ...
Thanks in advance..

HI srinivas
"It seems a data issue, Similar PO might be changed already and thus in SAP it is not allowing to change.
So try changing the test data and post the IDOC again , it will change the PO . "
yes we have entered the PO create and PO change .. where in PO change we have changed only QUANTITY and DATE .
and showing this error" *It is showing as error Instance of object type PO could not be changed. "*
Thanks in advance.

IDoc Object type

Similar Messages

Maybe you are looking for